! Started logfile: J1849+3024_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:34:48 2017 obs J1849+3024_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1849+3024_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.430556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1849+3024 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 3720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1849+3024_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.876185Jy sigma=0.013641 ! Fit after self-cal, rms=0.866511Jy sigma=0.013502 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=8.12 mas, bpa=11.14 degrees ! Estimated noise=1029.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103197 Jy ! Component: 100 - total flux cleaned = 0.12615 Jy ! Total flux subtracted in 100 components = 0.12615 Jy ! Clean residual min=-0.007418 max=0.008349 Jy/beam ! Clean residual mean=0.000016 rms=0.002017 Jy/beam ! Combined flux in latest and established models = 0.12615 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.12615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073837Jy sigma=0.000941 ! Fit after self-cal, rms=0.073797Jy sigma=0.000941 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.352 mas, bmaj=8.451 mas, bpa=10.56 degrees ! Estimated noise=798.612 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00864482 Jy ! Component: 100 - total flux cleaned = 0.0137096 Jy ! Component: 150 - total flux cleaned = 0.0173389 Jy ! Component: 200 - total flux cleaned = 0.0199871 Jy ! Total flux subtracted in 200 components = 0.0199871 Jy ! Clean residual min=-0.005457 max=0.005947 Jy/beam ! Clean residual mean=0.000025 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.146137 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 20 components and 0.146137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072328Jy sigma=0.000928 ! Fit after self-cal, rms=0.072210Jy sigma=0.000927 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 1.02 ! MK 0.96 NL 0.99 OV 0.94 PT 0.97 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* KP 1.00* LA 0.95 ! MK 0.95 NL 1.09 OV 0.97 PT 0.98 ! SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* KP 1.00* LA 0.77 ! MK 1.00 NL 0.97 OV 0.94 PT 0.97 ! SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* KP 1.00* LA 0.85 ! MK 0.97 NL 1.13 OV 0.96 PT 1.05 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.072210Jy sigma=0.000927 ! Fit after self-cal, rms=0.067737Jy sigma=0.000894 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=8.561 mas, bpa=10.4 degrees ! Estimated noise=792.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00418502 Jy ! Component: 100 - total flux cleaned = 0.00548354 Jy ! Component: 150 - total flux cleaned = 0.00567788 Jy ! Component: 200 - total flux cleaned = 0.00573127 Jy ! Total flux subtracted in 200 components = 0.00573127 Jy ! Clean residual min=-0.002917 max=0.002962 Jy/beam ! Clean residual mean=0.000000 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.151868 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 51 components and 0.151868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067408Jy sigma=0.000890 ! Fit after self-cal, rms=0.067089Jy sigma=0.000889 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067089Jy sigma=0.000889 ! Fit after self-cal, rms=0.066372Jy sigma=0.000887 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=8.552 mas, bpa=10.31 degrees ! Estimated noise=787 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000414205 Jy ! Component: 100 - total flux cleaned = 0.000464036 Jy ! Component: 150 - total flux cleaned = 0.000540875 Jy ! Component: 200 - total flux cleaned = 0.000644924 Jy ! Total flux subtracted in 200 components = 0.000644924 Jy ! Clean residual min=-0.002557 max=0.002334 Jy/beam ! Clean residual mean=0.000001 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.152513 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 76 components and 0.152513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066298Jy sigma=0.000886 ! Fit after self-cal, rms=0.066259Jy sigma=0.000886 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129984 Jy ! Component: 100 - total flux cleaned = 0.000215289 Jy ! Component: 150 - total flux cleaned = 0.000319426 Jy ! Component: 200 - total flux cleaned = 0.000366452 Jy ! Total flux subtracted in 200 components = 0.000366452 Jy ! Clean residual min=-0.002504 max=0.002220 Jy/beam ! Clean residual mean=0.000001 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.152879 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 89 components and 0.152879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066231Jy sigma=0.000886 ! Fit after self-cal, rms=0.066231Jy sigma=0.000886 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066231Jy sigma=0.000886 ! Fit after self-cal, rms=0.065997Jy sigma=0.000885 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=8.558 mas, bpa=10.28 degrees ! Estimated noise=785.273 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247875 Jy ! Component: 100 - total flux cleaned = 0.00036919 Jy ! Component: 150 - total flux cleaned = 0.000412841 Jy ! Component: 200 - total flux cleaned = 0.00047128 Jy ! Total flux subtracted in 200 components = 0.00047128 Jy ! Clean residual min=-0.002410 max=0.002097 Jy/beam ! Clean residual mean=0.000001 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.153351 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 105 components and 0.153351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065978Jy sigma=0.000885 ! Fit after self-cal, rms=0.065974Jy sigma=0.000885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.70212e-05 Jy ! Component: 100 - total flux cleaned = -2.3131e-06 Jy ! Component: 150 - total flux cleaned = 1.45799e-05 Jy ! Component: 200 - total flux cleaned = 3.00189e-05 Jy ! Total flux subtracted in 200 components = 3.00189e-05 Jy ! Clean residual min=-0.002373 max=0.002066 Jy/beam ! Clean residual mean=0.000001 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.153381 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 113 components and 0.153381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065962Jy sigma=0.000885 ! Fit after self-cal, rms=0.065963Jy sigma=0.000885 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065963Jy sigma=0.000885 ! Fit after self-cal, rms=0.065907Jy sigma=0.000885 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.056 mas, bmaj=10.55 mas, bpa=12.48 degrees ! Estimated noise=916.163 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247983 Jy ! Component: 100 - total flux cleaned = 0.000420011 Jy ! Component: 150 - total flux cleaned = 0.000629989 Jy ! Component: 200 - total flux cleaned = 0.000812169 Jy ! Total flux subtracted in 200 components = 0.000812169 Jy ! Clean residual min=-0.002200 max=0.001789 Jy/beam ! Clean residual mean=0.000001 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.154193 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 135 components and 0.154193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065906Jy sigma=0.000885 ! Fit after self-cal, rms=0.065907Jy sigma=0.000885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013338 Jy ! Component: 100 - total flux cleaned = 0.000264715 Jy ! Component: 150 - total flux cleaned = 0.000338159 Jy ! Component: 200 - total flux cleaned = 0.000391827 Jy ! Total flux subtracted in 200 components = 0.000391827 Jy ! Clean residual min=-0.002079 max=0.001736 Jy/beam ! Clean residual mean=0.000001 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.154585 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 144 components and 0.154585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065908Jy sigma=0.000885 ! Fit after self-cal, rms=0.065905Jy sigma=0.000885 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.327 mas, bmaj=8.559 mas, bpa=10.28 degrees ! Estimated noise=784.458 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.327 x 8.559 at 10.28 degrees (North through East) ! Clean map min=-0.0020679 max=0.13083 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.791 mas, bmaj=8.248 mas, bpa=10.85 degrees ! Estimated noise=1012.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101513 Jy ! Component: 100 - total flux cleaned = 0.123796 Jy ! Component: 150 - total flux cleaned = 0.131521 Jy ! Component: 200 - total flux cleaned = 0.136264 Jy ! Total flux subtracted in 200 components = 0.136264 Jy ! Clean residual min=-0.003922 max=0.004000 Jy/beam ! Clean residual mean=0.000005 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.136264 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.136264 Jy ! Inverting map and beam ! Estimated beam: bmin=3.327 mas, bmaj=8.559 mas, bpa=10.28 degrees ! Estimated noise=784.458 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00393642 Jy ! Component: 100 - total flux cleaned = 0.00678057 Jy ! Component: 150 - total flux cleaned = 0.00905987 Jy ! Component: 200 - total flux cleaned = 0.0109352 Jy ! Total flux subtracted in 200 components = 0.0109352 Jy ! Clean residual min=-0.002768 max=0.002072 Jy/beam ! Clean residual mean=0.000006 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.147199 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 70 components and 0.147199 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.056 mas, bmaj=10.55 mas, bpa=12.48 degrees ! Estimated noise=916.163 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222246 Jy ! Component: 100 - total flux cleaned = 0.00374781 Jy ! Component: 150 - total flux cleaned = 0.0048872 Jy ! Component: 200 - total flux cleaned = 0.00574988 Jy ! Total flux subtracted in 200 components = 0.00574988 Jy ! Clean residual min=-0.002264 max=0.001898 Jy/beam ! Clean residual mean=0.000004 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.152949 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000660712 Jy ! Component: 100 - total flux cleaned = 0.00117101 Jy ! Component: 150 - total flux cleaned = 0.0014505 Jy ! Component: 200 - total flux cleaned = 0.00153643 Jy ! Total flux subtracted in 200 components = 0.00153643 Jy ! Clean residual min=-0.002067 max=0.001776 Jy/beam ! Clean residual mean=0.000002 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.154486 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 129 components and 0.154486 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.327 mas, bmaj=8.559 mas, bpa=10.28 degrees ! Estimated noise=784.458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000516126 Jy ! Component: 100 - total flux cleaned = -0.000391209 Jy ! Component: 150 - total flux cleaned = -0.00031643 Jy ! Component: 200 - total flux cleaned = -0.000316493 Jy ! Total flux subtracted in 200 components = -0.000316493 Jy ! Clean residual min=-0.002256 max=0.001984 Jy/beam ! Clean residual mean=0.000001 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.154169 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 147 components and 0.154169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065937Jy sigma=0.000885 ! Fit after self-cal, rms=0.065932Jy sigma=0.000885 wmodel J1849+3024_S_2014_01_04_pus_map.mod ! Writing 147 model components to file: J1849+3024_S_2014_01_04_pus_map.mod wobs J1849+3024_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1849+3024_S_2014_01_04_pus_uvs.fits wwins J1849+3024_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1849+3024_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000158798 Jy ! Component: 100 - total flux cleaned = 2.36515e-06 Jy ! Component: 150 - total flux cleaned = 0.000180517 Jy ! Component: 200 - total flux cleaned = 0.000180336 Jy ! Component: 250 - total flux cleaned = 7.43991e-05 Jy ! Component: 300 - total flux cleaned = -2.57767e-05 Jy ! Component: 350 - total flux cleaned = -0.000145101 Jy ! Component: 400 - total flux cleaned = -0.000354167 Jy ! Component: 450 - total flux cleaned = -0.000534251 Jy ! Component: 500 - total flux cleaned = -0.000839702 Jy ! Component: 550 - total flux cleaned = -0.00105185 Jy ! Component: 600 - total flux cleaned = -0.00127864 Jy ! Component: 650 - total flux cleaned = -0.00145971 Jy ! Component: 700 - total flux cleaned = -0.00165553 Jy ! Component: 750 - total flux cleaned = -0.00175131 Jy ! Component: 800 - total flux cleaned = -0.00193782 Jy ! Component: 850 - total flux cleaned = -0.00202885 Jy ! Component: 900 - total flux cleaned = -0.00211832 Jy ! Component: 950 - total flux cleaned = -0.00225823 Jy ! Component: 1000 - total flux cleaned = -0.0023605 Jy ! Component: 1050 - total flux cleaned = -0.00247761 Jy ! Component: 1100 - total flux cleaned = -0.00259223 Jy ! Component: 1150 - total flux cleaned = -0.00270478 Jy ! Component: 1200 - total flux cleaned = -0.00278382 Jy ! Component: 1250 - total flux cleaned = -0.00279918 Jy ! Component: 1300 - total flux cleaned = -0.002891 Jy ! Component: 1350 - total flux cleaned = -0.00293597 Jy ! Component: 1400 - total flux cleaned = -0.00298019 Jy ! Component: 1450 - total flux cleaned = -0.00300911 Jy ! Component: 1500 - total flux cleaned = -0.00306622 Jy ! Component: 1550 - total flux cleaned = -0.00310845 Jy ! Component: 1600 - total flux cleaned = -0.00312242 Jy ! Component: 1650 - total flux cleaned = -0.00313627 Jy ! Component: 1700 - total flux cleaned = -0.00316333 Jy ! Component: 1750 - total flux cleaned = -0.00320331 Jy ! Component: 1800 - total flux cleaned = -0.00321642 Jy ! Component: 1850 - total flux cleaned = -0.0032424 Jy ! Component: 1900 - total flux cleaned = -0.00319121 Jy ! Component: 1950 - total flux cleaned = -0.00321668 Jy ! Component: 2000 - total flux cleaned = -0.00319157 Jy ! Component: 2050 - total flux cleaned = -0.00316697 Jy ! Component: 2100 - total flux cleaned = -0.00315474 Jy ! Component: 2150 - total flux cleaned = -0.00313066 Jy ! Component: 2200 - total flux cleaned = -0.00310697 Jy ! Component: 2250 - total flux cleaned = -0.00311881 Jy ! Component: 2300 - total flux cleaned = -0.0030955 Jy ! Component: 2350 - total flux cleaned = -0.00306086 Jy ! Component: 2400 - total flux cleaned = -0.00306098 Jy ! Component: 2450 - total flux cleaned = -0.00304959 Jy ! Component: 2500 - total flux cleaned = -0.00299332 Jy ! Component: 2550 - total flux cleaned = -0.00297101 Jy ! Component: 2600 - total flux cleaned = -0.00293784 Jy ! Component: 2650 - total flux cleaned = -0.00294877 Jy ! Component: 2700 - total flux cleaned = -0.00290509 Jy ! Component: 2750 - total flux cleaned = -0.00292665 Jy ! Component: 2800 - total flux cleaned = -0.00287275 Jy ! Component: 2850 - total flux cleaned = -0.0028727 Jy ! Component: 2900 - total flux cleaned = -0.00287264 Jy ! Component: 2950 - total flux cleaned = -0.00285157 Jy ! Component: 3000 - total flux cleaned = -0.00286202 Jy ! Component: 3050 - total flux cleaned = -0.00284117 Jy ! Component: 3100 - total flux cleaned = -0.00285149 Jy ! Component: 3150 - total flux cleaned = -0.00283094 Jy ! Component: 3200 - total flux cleaned = -0.00288217 Jy ! Component: 3250 - total flux cleaned = -0.00286183 Jy ! Component: 3300 - total flux cleaned = -0.00287188 Jy ! Component: 3350 - total flux cleaned = -0.0028819 Jy ! Component: 3400 - total flux cleaned = -0.00290189 Jy ! Component: 3450 - total flux cleaned = -0.00293171 Jy ! Component: 3500 - total flux cleaned = -0.00293168 Jy ! Component: 3550 - total flux cleaned = -0.00295139 Jy ! Component: 3600 - total flux cleaned = -0.00296115 Jy ! Component: 3650 - total flux cleaned = -0.00297086 Jy ! Component: 3700 - total flux cleaned = -0.00296114 Jy ! Component: 3750 - total flux cleaned = -0.00299017 Jy ! Component: 3800 - total flux cleaned = -0.00298051 Jy ! Component: 3850 - total flux cleaned = -0.00299014 Jy ! Component: 3900 - total flux cleaned = -0.00298063 Jy ! Component: 3950 - total flux cleaned = -0.0030283 Jy ! Component: 4000 - total flux cleaned = -0.00302826 Jy ! Component: 4050 - total flux cleaned = -0.00302832 Jy ! Total flux subtracted in 4096 components = -0.00304722 Jy ! Clean residual min=-0.000611 max=0.000576 Jy/beam ! Clean residual mean=0.000002 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.151122 Jy keep ! Adding 237 model components to the UV plane model. ! The established model now contains 384 components and 0.151122 Jy ![Exited script file: muppet] wmap "J1849+3024_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.327 x 8.559 at 10.28 degrees (North through East) ! Clean map min=-0.00139 max=0.13084 Jy/beam ! Writing clean map to FITS file: J1849+3024_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.130844 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000151702 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.347822 0.347822 0.695644 1.39129 2.78258 5.56515 11.1303 22.2606 44.5212 89.0425 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.13 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.327 x 8.559 at 10.28 degrees (North through East) ! Clean map min=-0.00139 max=0.13084 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1849+3024_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:34:53 2017