! Started logfile: J1848+3244_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:34:44 2017 obs J1848+3244_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1848+3244_S_2014_01_04_pus_uva.fits ! AN table 1: 89 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.28839 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1848+3244 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 3696 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1848+3244_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 355 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 355 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 355 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 355 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.756420Jy sigma=0.012023 ! Fit after self-cal, rms=0.674833Jy sigma=0.010673 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.631 mas, bmaj=7.655 mas, bpa=10.26 degrees ! Estimated noise=1131.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.246349 Jy ! Component: 100 - total flux cleaned = 0.328183 Jy ! Total flux subtracted in 100 components = 0.328183 Jy ! Clean residual min=-0.036364 max=0.049614 Jy/beam ! Clean residual mean=-0.000036 rms=0.009268 Jy/beam ! Combined flux in latest and established models = 0.328183 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.328183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129989Jy sigma=0.001703 ! Fit after self-cal, rms=0.129716Jy sigma=0.001700 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=7.569 mas, bpa=11.08 degrees ! Estimated noise=792.392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0579071 Jy ! Component: 100 - total flux cleaned = 0.0910707 Jy ! Component: 150 - total flux cleaned = 0.111821 Jy ! Component: 200 - total flux cleaned = 0.126977 Jy ! Total flux subtracted in 200 components = 0.126977 Jy ! Clean residual min=-0.018847 max=0.024888 Jy/beam ! Clean residual mean=0.000042 rms=0.004730 Jy/beam ! Combined flux in latest and established models = 0.455159 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 45 components and 0.455159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093803Jy sigma=0.001222 ! Fit after self-cal, rms=0.093349Jy sigma=0.001218 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 1.00 ! MK 1.05 NL 0.97 OV 0.91 PT 0.96 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* KP 1.00* LA 0.95 ! MK 1.06 NL 1.02 OV 0.95 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 0.80 ! MK 1.08 NL 0.98 OV 0.88 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.00* KP 1.00* LA 0.87 ! MK 1.11 NL 1.08 OV 0.94 PT 0.98 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.093349Jy sigma=0.001218 ! Fit after self-cal, rms=0.079433Jy sigma=0.001012 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=7.76 mas, bpa=11.52 degrees ! Estimated noise=795.605 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00040849 Jy ! Component: 100 - total flux cleaned = -0.00116351 Jy ! Component: 150 - total flux cleaned = -0.0021344 Jy ! Component: 200 - total flux cleaned = -0.00332995 Jy ! Total flux subtracted in 200 components = -0.00332995 Jy ! Clean residual min=-0.008620 max=0.007167 Jy/beam ! Clean residual mean=0.000022 rms=0.001969 Jy/beam ! Combined flux in latest and established models = 0.451829 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 69 components and 0.451829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075051Jy sigma=0.000964 ! Fit after self-cal, rms=0.074666Jy sigma=0.000961 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074666Jy sigma=0.000961 ! Fit after self-cal, rms=0.074576Jy sigma=0.000950 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=7.743 mas, bpa=11.53 degrees ! Estimated noise=801.979 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000889214 Jy ! Component: 100 - total flux cleaned = -0.00156095 Jy ! Component: 150 - total flux cleaned = -0.00236478 Jy ! Component: 200 - total flux cleaned = -0.00236644 Jy ! Total flux subtracted in 200 components = -0.00236644 Jy ! Clean residual min=-0.006240 max=0.005489 Jy/beam ! Clean residual mean=0.000014 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.449463 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 83 components and 0.449463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072989Jy sigma=0.000935 ! Fit after self-cal, rms=0.072913Jy sigma=0.000935 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.04525e-05 Jy ! Component: 100 - total flux cleaned = 0.000163523 Jy ! Component: 150 - total flux cleaned = 0.000303355 Jy ! Component: 200 - total flux cleaned = 0.000563053 Jy ! Total flux subtracted in 200 components = 0.000563053 Jy ! Clean residual min=-0.005110 max=0.004472 Jy/beam ! Clean residual mean=0.000013 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.450026 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 93 components and 0.450026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072199Jy sigma=0.000928 ! Fit after self-cal, rms=0.072188Jy sigma=0.000928 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072188Jy sigma=0.000928 ! Fit after self-cal, rms=0.071887Jy sigma=0.000927 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.043 mas, bmaj=7.746 mas, bpa=11.44 degrees ! Estimated noise=800.543 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000393474 Jy ! Component: 100 - total flux cleaned = -0.000643474 Jy ! Component: 150 - total flux cleaned = -0.000537681 Jy ! Component: 200 - total flux cleaned = -0.000249433 Jy ! Total flux subtracted in 200 components = -0.000249433 Jy ! Clean residual min=-0.004047 max=0.003944 Jy/beam ! Clean residual mean=0.000012 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.449776 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 102 components and 0.449777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071455Jy sigma=0.000923 ! Fit after self-cal, rms=0.071435Jy sigma=0.000923 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.03691e-05 Jy ! Component: 100 - total flux cleaned = 0.000345275 Jy ! Component: 150 - total flux cleaned = 0.000502363 Jy ! Component: 200 - total flux cleaned = 0.000792768 Jy ! Total flux subtracted in 200 components = 0.000792768 Jy ! Clean residual min=-0.003625 max=0.003618 Jy/beam ! Clean residual mean=0.000011 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.450569 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 109 components and 0.450569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071208Jy sigma=0.000921 ! Fit after self-cal, rms=0.071202Jy sigma=0.000920 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071202Jy sigma=0.000920 ! Fit after self-cal, rms=0.070923Jy sigma=0.000920 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.116 mas, bmaj=10.27 mas, bpa=-2.119 degrees ! Estimated noise=930.645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000569161 Jy ! Component: 100 - total flux cleaned = 0.00081953 Jy ! Component: 150 - total flux cleaned = 0.000936106 Jy ! Component: 200 - total flux cleaned = 0.00099815 Jy ! Total flux subtracted in 200 components = 0.00099815 Jy ! Clean residual min=-0.003260 max=0.003568 Jy/beam ! Clean residual mean=0.000022 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.451567 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 118 components and 0.451568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070905Jy sigma=0.000920 ! Fit after self-cal, rms=0.070883Jy sigma=0.000920 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000341686 Jy ! Component: 100 - total flux cleaned = 0.000532173 Jy ! Component: 150 - total flux cleaned = 0.000549781 Jy ! Component: 200 - total flux cleaned = 0.000549943 Jy ! Total flux subtracted in 200 components = 0.000549943 Jy ! Clean residual min=-0.003090 max=0.003488 Jy/beam ! Clean residual mean=0.000021 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.452117 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 127 components and 0.452118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070876Jy sigma=0.000920 ! Fit after self-cal, rms=0.070869Jy sigma=0.000920 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=7.748 mas, bpa=11.35 degrees ! Estimated noise=799.153 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.038 x 7.748 at 11.35 degrees (North through East) ! Clean map min=-0.0072501 max=0.28476 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.638 mas, bmaj=7.824 mas, bpa=10.39 degrees ! Estimated noise=1152.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.250891 Jy ! Component: 100 - total flux cleaned = 0.332735 Jy ! Component: 150 - total flux cleaned = 0.380753 Jy ! Component: 200 - total flux cleaned = 0.410879 Jy ! Total flux subtracted in 200 components = 0.410879 Jy ! Clean residual min=-0.015023 max=0.017423 Jy/beam ! Clean residual mean=-0.000007 rms=0.003622 Jy/beam ! Combined flux in latest and established models = 0.410879 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.410879 Jy ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=7.748 mas, bpa=11.35 degrees ! Estimated noise=799.153 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203353 Jy ! Component: 100 - total flux cleaned = 0.0264862 Jy ! Component: 150 - total flux cleaned = 0.0272597 Jy ! Component: 200 - total flux cleaned = 0.0272471 Jy ! Total flux subtracted in 200 components = 0.0272471 Jy ! Clean residual min=-0.007149 max=0.006147 Jy/beam ! Clean residual mean=0.000014 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.438126 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 48 components and 0.438126 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.116 mas, bmaj=10.27 mas, bpa=-2.119 degrees ! Estimated noise=930.645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00410665 Jy ! Component: 100 - total flux cleaned = 0.00672055 Jy ! Component: 150 - total flux cleaned = 0.00804981 Jy ! Component: 200 - total flux cleaned = 0.0087593 Jy ! Total flux subtracted in 200 components = 0.0087593 Jy ! Clean residual min=-0.003808 max=0.003295 Jy/beam ! Clean residual mean=0.000026 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 0.446885 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000567957 Jy ! Component: 100 - total flux cleaned = 0.00101863 Jy ! Component: 150 - total flux cleaned = 0.00117242 Jy ! Component: 200 - total flux cleaned = 0.00131142 Jy ! Total flux subtracted in 200 components = 0.00131142 Jy ! Clean residual min=-0.003625 max=0.003164 Jy/beam ! Clean residual mean=0.000023 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.448197 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 70 components and 0.448197 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=7.748 mas, bpa=11.35 degrees ! Estimated noise=799.153 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00203948 Jy ! Component: 100 - total flux cleaned = -0.0030175 Jy ! Component: 150 - total flux cleaned = -0.00301306 Jy ! Component: 200 - total flux cleaned = -0.00285756 Jy ! Total flux subtracted in 200 components = -0.00285756 Jy ! Clean residual min=-0.005461 max=0.003911 Jy/beam ! Clean residual mean=0.000011 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.445339 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 91 components and 0.445339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071827Jy sigma=0.000929 ! Fit after self-cal, rms=0.071721Jy sigma=0.000929 wmodel J1848+3244_S_2014_01_04_pus_map.mod ! Writing 91 model components to file: J1848+3244_S_2014_01_04_pus_map.mod wobs J1848+3244_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1848+3244_S_2014_01_04_pus_uvs.fits wwins J1848+3244_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1848+3244_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00208399 Jy ! Component: 100 - total flux cleaned = -0.00308527 Jy ! Component: 150 - total flux cleaned = -0.00379605 Jy ! Component: 200 - total flux cleaned = -0.00470622 Jy ! Component: 250 - total flux cleaned = -0.00550716 Jy ! Component: 300 - total flux cleaned = -0.00615803 Jy ! Component: 350 - total flux cleaned = -0.00682966 Jy ! Component: 400 - total flux cleaned = -0.00732503 Jy ! Component: 450 - total flux cleaned = -0.00779838 Jy ! Component: 500 - total flux cleaned = -0.00820891 Jy ! Component: 550 - total flux cleaned = -0.00851843 Jy ! Component: 600 - total flux cleaned = -0.00881748 Jy ! Component: 650 - total flux cleaned = -0.00898303 Jy ! Component: 700 - total flux cleaned = -0.00930092 Jy ! Component: 750 - total flux cleaned = -0.00964534 Jy ! Component: 800 - total flux cleaned = -0.00990562 Jy ! Component: 850 - total flux cleaned = -0.0101572 Jy ! Component: 900 - total flux cleaned = -0.0103672 Jy ! Component: 950 - total flux cleaned = -0.0105717 Jy ! Component: 1000 - total flux cleaned = -0.0108035 Jy ! Component: 1050 - total flux cleaned = -0.0110602 Jy ! Component: 1100 - total flux cleaned = -0.0112791 Jy ! Component: 1150 - total flux cleaned = -0.0115244 Jy ! Component: 1200 - total flux cleaned = -0.0117041 Jy ! Component: 1250 - total flux cleaned = -0.0119973 Jy ! Component: 1300 - total flux cleaned = -0.0123406 Jy ! Component: 1350 - total flux cleaned = -0.0126199 Jy ! Component: 1400 - total flux cleaned = -0.0128393 Jy ! Component: 1450 - total flux cleaned = -0.0130284 Jy ! Component: 1500 - total flux cleaned = -0.0132666 Jy ! Component: 1550 - total flux cleaned = -0.0135261 Jy ! Component: 1600 - total flux cleaned = -0.0137298 Jy ! Component: 1650 - total flux cleaned = -0.014031 Jy ! Component: 1700 - total flux cleaned = -0.0142529 Jy ! Component: 1750 - total flux cleaned = -0.0144719 Jy ! Component: 1800 - total flux cleaned = -0.0146395 Jy ! Component: 1850 - total flux cleaned = -0.0148282 Jy ! Component: 1900 - total flux cleaned = -0.0148748 Jy ! Component: 1950 - total flux cleaned = -0.0149898 Jy ! Component: 2000 - total flux cleaned = -0.0150803 Jy ! Component: 2050 - total flux cleaned = -0.0151474 Jy ! Component: 2100 - total flux cleaned = -0.0152576 Jy ! Component: 2150 - total flux cleaned = -0.0152792 Jy ! Component: 2200 - total flux cleaned = -0.0153005 Jy ! Component: 2250 - total flux cleaned = -0.0153859 Jy ! Component: 2300 - total flux cleaned = -0.0153649 Jy ! Component: 2350 - total flux cleaned = -0.0153858 Jy ! Component: 2400 - total flux cleaned = -0.0154063 Jy ! Component: 2450 - total flux cleaned = -0.0154063 Jy ! Component: 2500 - total flux cleaned = -0.0153257 Jy ! Component: 2550 - total flux cleaned = -0.0153456 Jy ! Component: 2600 - total flux cleaned = -0.0153257 Jy ! Component: 2650 - total flux cleaned = -0.0153256 Jy ! Component: 2700 - total flux cleaned = -0.0153451 Jy ! Component: 2750 - total flux cleaned = -0.0153257 Jy ! Component: 2800 - total flux cleaned = -0.0153642 Jy ! Component: 2850 - total flux cleaned = -0.0153834 Jy ! Component: 2900 - total flux cleaned = -0.0154024 Jy ! Component: 2950 - total flux cleaned = -0.0154024 Jy ! Component: 3000 - total flux cleaned = -0.01544 Jy ! Component: 3050 - total flux cleaned = -0.0154026 Jy ! Component: 3100 - total flux cleaned = -0.0154212 Jy ! Component: 3150 - total flux cleaned = -0.015458 Jy ! Component: 3200 - total flux cleaned = -0.0154766 Jy ! Component: 3250 - total flux cleaned = -0.0155132 Jy ! Component: 3300 - total flux cleaned = -0.015495 Jy ! Component: 3350 - total flux cleaned = -0.0155675 Jy ! Component: 3400 - total flux cleaned = -0.0155494 Jy ! Component: 3450 - total flux cleaned = -0.0156391 Jy ! Component: 3500 - total flux cleaned = -0.0156033 Jy ! Component: 3550 - total flux cleaned = -0.015639 Jy ! Component: 3600 - total flux cleaned = -0.0156567 Jy ! Component: 3650 - total flux cleaned = -0.0156215 Jy ! Component: 3700 - total flux cleaned = -0.0156567 Jy ! Component: 3750 - total flux cleaned = -0.0156566 Jy ! Component: 3800 - total flux cleaned = -0.0156391 Jy ! Component: 3850 - total flux cleaned = -0.0156565 Jy ! Component: 3900 - total flux cleaned = -0.0156044 Jy ! Component: 3950 - total flux cleaned = -0.0156738 Jy ! Component: 4000 - total flux cleaned = -0.0156737 Jy ! Component: 4050 - total flux cleaned = -0.0157082 Jy ! Total flux subtracted in 4096 components = -0.0156737 Jy ! Clean residual min=-0.000998 max=0.001044 Jy/beam ! Clean residual mean=0.000004 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.429666 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 348 components and 0.429666 Jy ![Exited script file: muppet] wmap "J1848+3244_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.038 x 7.748 at 11.35 degrees (North through East) ! Clean map min=-0.0054976 max=0.28783 Jy/beam ! Writing clean map to FITS file: J1848+3244_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.287828 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000308916 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.321979 0.321979 0.643959 1.28792 2.57583 5.15167 10.3033 20.6067 41.2134 82.4267 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.287 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.038 x 7.748 at 11.35 degrees (North through East) ! Clean map min=-0.0054976 max=0.28783 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1848+3244_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:34:48 2017