! Started logfile: J1845-2852_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:34:30 2017 obs J1845-2852_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1845-2852_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J1845-2852 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1845-2852_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.810156Jy sigma=0.007645 ! Fit after self-cal, rms=0.697167Jy sigma=0.006649 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.311 mas, bmaj=5.592 mas, bpa=0.7958 degrees ! Estimated noise=1492.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.231682 Jy ! Component: 100 - total flux cleaned = 0.301497 Jy ! Total flux subtracted in 100 components = 0.301497 Jy ! Clean residual min=-0.016068 max=0.028954 Jy/beam ! Clean residual mean=-0.000015 rms=0.005113 Jy/beam ! Combined flux in latest and established models = 0.301497 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.301497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128768Jy sigma=0.001148 ! Fit after self-cal, rms=0.128747Jy sigma=0.001148 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.692 mas, bmaj=6.557 mas, bpa=-0.2499 degrees ! Estimated noise=1159.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0421145 Jy ! Component: 100 - total flux cleaned = 0.0618359 Jy ! Component: 150 - total flux cleaned = 0.072283 Jy ! Component: 200 - total flux cleaned = 0.0783568 Jy ! Total flux subtracted in 200 components = 0.0783568 Jy ! Clean residual min=-0.011334 max=0.010658 Jy/beam ! Clean residual mean=-0.000073 rms=0.002939 Jy/beam ! Combined flux in latest and established models = 0.379854 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 36 components and 0.379854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114082Jy sigma=0.001034 ! Fit after self-cal, rms=0.114144Jy sigma=0.001033 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 0.99 ! MK 1.01 NL 1.01 OV 0.95 PT 1.00 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* KP 1.00* LA 0.97 ! MK 1.01 NL 1.05 OV 0.98 PT 0.98 ! SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* KP 1.00* LA 0.80 ! MK 1.02 NL 1.03 OV 0.92 PT 0.91 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* KP 1.00* LA 0.85 ! MK 0.99 NL 1.11 OV 0.97 PT 1.02 ! SC 0.90 ! ! ! Fit before self-cal, rms=0.114144Jy sigma=0.001033 ! Fit after self-cal, rms=0.104533Jy sigma=0.000957 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=6.592 mas, bpa=-0.013 degrees ! Estimated noise=1153.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000943871 Jy ! Component: 100 - total flux cleaned = 0.000998838 Jy ! Component: 150 - total flux cleaned = 0.000993626 Jy ! Component: 200 - total flux cleaned = 0.000947355 Jy ! Total flux subtracted in 200 components = 0.000947355 Jy ! Clean residual min=-0.007044 max=0.005841 Jy/beam ! Clean residual mean=0.000011 rms=0.001511 Jy/beam ! Combined flux in latest and established models = 0.380801 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.380801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104473Jy sigma=0.000956 ! Fit after self-cal, rms=0.104171Jy sigma=0.000956 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104171Jy sigma=0.000956 ! Fit after self-cal, rms=0.104008Jy sigma=0.000956 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.693 mas, bmaj=6.586 mas, bpa=0.05207 degrees ! Estimated noise=1153.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000957896 Jy ! Component: 100 - total flux cleaned = 0.00100111 Jy ! Component: 150 - total flux cleaned = 0.00104038 Jy ! Component: 200 - total flux cleaned = 0.00104112 Jy ! Total flux subtracted in 200 components = 0.00104112 Jy ! Clean residual min=-0.006882 max=0.005793 Jy/beam ! Clean residual mean=0.000012 rms=0.001504 Jy/beam ! Combined flux in latest and established models = 0.381842 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.381842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103971Jy sigma=0.000956 ! Fit after self-cal, rms=0.103957Jy sigma=0.000956 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.95384e-07 Jy ! Component: 100 - total flux cleaned = -1.17378e-06 Jy ! Component: 150 - total flux cleaned = -2.1635e-06 Jy ! Component: 200 - total flux cleaned = -1.66499e-06 Jy ! Total flux subtracted in 200 components = -1.66499e-06 Jy ! Clean residual min=-0.006757 max=0.005782 Jy/beam ! Clean residual mean=0.000012 rms=0.001500 Jy/beam ! Combined flux in latest and established models = 0.38184 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.38184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103937Jy sigma=0.000955 ! Fit after self-cal, rms=0.103935Jy sigma=0.000955 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103935Jy sigma=0.000955 ! Fit after self-cal, rms=0.103224Jy sigma=0.000946 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.691 mas, bmaj=6.579 mas, bpa=-0.05171 degrees ! Estimated noise=1153.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000365901 Jy ! Component: 100 - total flux cleaned = 0.000437575 Jy ! Component: 150 - total flux cleaned = 0.000459586 Jy ! Component: 200 - total flux cleaned = 0.000459333 Jy ! Total flux subtracted in 200 components = 0.000459333 Jy ! Clean residual min=-0.004112 max=0.003815 Jy/beam ! Clean residual mean=-0.000005 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.3823 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 53 components and 0.3823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103214Jy sigma=0.000946 ! Fit after self-cal, rms=0.103215Jy sigma=0.000946 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.411e-05 Jy ! Component: 100 - total flux cleaned = -3.50006e-05 Jy ! Component: 150 - total flux cleaned = -3.51358e-05 Jy ! Component: 200 - total flux cleaned = -5.2474e-05 Jy ! Total flux subtracted in 200 components = -5.2474e-05 Jy ! Clean residual min=-0.004115 max=0.003816 Jy/beam ! Clean residual mean=-0.000005 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 0.382247 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.382247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103208Jy sigma=0.000946 ! Fit after self-cal, rms=0.103205Jy sigma=0.000946 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103205Jy sigma=0.000946 ! Fit after self-cal, rms=0.103202Jy sigma=0.000946 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.224 mas, bmaj=18.93 mas, bpa=2.879 degrees ! Estimated noise=1503.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000904901 Jy ! Component: 100 - total flux cleaned = 0.000992573 Jy ! Component: 150 - total flux cleaned = 0.000992727 Jy ! Component: 200 - total flux cleaned = 0.00099295 Jy ! Total flux subtracted in 200 components = 0.00099295 Jy ! Clean residual min=-0.003672 max=0.004021 Jy/beam ! Clean residual mean=-0.000013 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.38324 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 60 components and 0.38324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103203Jy sigma=0.000946 ! Fit after self-cal, rms=0.103204Jy sigma=0.000946 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.71711e-05 Jy ! Component: 100 - total flux cleaned = 3.76548e-05 Jy ! Component: 150 - total flux cleaned = 3.77256e-05 Jy ! Component: 200 - total flux cleaned = 3.06434e-05 Jy ! Total flux subtracted in 200 components = 3.06434e-05 Jy ! Clean residual min=-0.003664 max=0.004037 Jy/beam ! Clean residual mean=-0.000013 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.383271 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.383271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103208Jy sigma=0.000946 ! Fit after self-cal, rms=0.103208Jy sigma=0.000946 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.689 mas, bmaj=6.576 mas, bpa=-0.04 degrees ! Estimated noise=1154.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.689 x 6.576 at -0.04 degrees (North through East) ! Clean map min=-0.0039182 max=0.30863 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.303 mas, bmaj=5.611 mas, bpa=1.139 degrees ! Estimated noise=1490.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.231665 Jy ! Component: 100 - total flux cleaned = 0.303076 Jy ! Component: 150 - total flux cleaned = 0.334692 Jy ! Component: 200 - total flux cleaned = 0.352071 Jy ! Total flux subtracted in 200 components = 0.352071 Jy ! Clean residual min=-0.007298 max=0.008718 Jy/beam ! Clean residual mean=0.000003 rms=0.001960 Jy/beam ! Combined flux in latest and established models = 0.352071 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.352071 Jy ! Inverting map and beam ! Estimated beam: bmin=2.689 mas, bmaj=6.576 mas, bpa=-0.04 degrees ! Estimated noise=1154.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142195 Jy ! Component: 100 - total flux cleaned = 0.0213177 Jy ! Component: 150 - total flux cleaned = 0.0250727 Jy ! Component: 200 - total flux cleaned = 0.027155 Jy ! Total flux subtracted in 200 components = 0.027155 Jy ! Clean residual min=-0.004252 max=0.003735 Jy/beam ! Clean residual mean=-0.000007 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.379226 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 47 components and 0.379226 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.224 mas, bmaj=18.93 mas, bpa=2.879 degrees ! Estimated noise=1503.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224679 Jy ! Component: 100 - total flux cleaned = 0.00289623 Jy ! Component: 150 - total flux cleaned = 0.00300224 Jy ! Component: 200 - total flux cleaned = 0.00301159 Jy ! Total flux subtracted in 200 components = 0.00301159 Jy ! Clean residual min=-0.003803 max=0.004074 Jy/beam ! Clean residual mean=-0.000014 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.382238 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.81177e-05 Jy ! Component: 100 - total flux cleaned = 1.84326e-05 Jy ! Component: 150 - total flux cleaned = 2.69424e-05 Jy ! Component: 200 - total flux cleaned = 3.50793e-05 Jy ! Total flux subtracted in 200 components = 3.50793e-05 Jy ! Clean residual min=-0.003796 max=0.004063 Jy/beam ! Clean residual mean=-0.000014 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.382273 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 61 components and 0.382273 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.689 mas, bmaj=6.576 mas, bpa=-0.04 degrees ! Estimated noise=1154.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00035079 Jy ! Component: 100 - total flux cleaned = -0.0004476 Jy ! Component: 150 - total flux cleaned = -0.00052971 Jy ! Component: 200 - total flux cleaned = -0.000529244 Jy ! Total flux subtracted in 200 components = -0.000529244 Jy ! Clean residual min=-0.004161 max=0.003734 Jy/beam ! Clean residual mean=-0.000006 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.381744 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.381744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103216Jy sigma=0.000946 ! Fit after self-cal, rms=0.103195Jy sigma=0.000946 wmodel J1845-2852_S_2014_01_04_pus_map.mod ! Writing 74 model components to file: J1845-2852_S_2014_01_04_pus_map.mod wobs J1845-2852_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1845-2852_S_2014_01_04_pus_uvs.fits wwins J1845-2852_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1845-2852_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000706197 Jy ! Component: 100 - total flux cleaned = -0.000831802 Jy ! Component: 150 - total flux cleaned = -0.000832947 Jy ! Component: 200 - total flux cleaned = -0.00061208 Jy ! Component: 250 - total flux cleaned = -0.000663531 Jy ! Component: 300 - total flux cleaned = -0.000714179 Jy ! Component: 350 - total flux cleaned = -0.000761455 Jy ! Component: 400 - total flux cleaned = -0.000715113 Jy ! Component: 450 - total flux cleaned = -0.00062598 Jy ! Component: 500 - total flux cleaned = -0.000625647 Jy ! Component: 550 - total flux cleaned = -0.000583806 Jy ! Component: 600 - total flux cleaned = -0.000504596 Jy ! Component: 650 - total flux cleaned = -0.000544104 Jy ! Component: 700 - total flux cleaned = -0.000506186 Jy ! Component: 750 - total flux cleaned = -0.000505924 Jy ! Component: 800 - total flux cleaned = -0.000398967 Jy ! Component: 850 - total flux cleaned = -0.000295402 Jy ! Component: 900 - total flux cleaned = -0.000161604 Jy ! Component: 950 - total flux cleaned = -6.37529e-05 Jy ! Component: 1000 - total flux cleaned = -9.48691e-05 Jy ! Component: 1050 - total flux cleaned = 3.0112e-05 Jy ! Component: 1100 - total flux cleaned = -7.5452e-07 Jy ! Component: 1150 - total flux cleaned = 0.000117919 Jy ! Component: 1200 - total flux cleaned = 0.000146616 Jy ! Component: 1250 - total flux cleaned = 0.000147071 Jy ! Component: 1300 - total flux cleaned = 0.000202192 Jy ! Component: 1350 - total flux cleaned = 0.000256161 Jy ! Component: 1400 - total flux cleaned = 0.000228432 Jy ! Component: 1450 - total flux cleaned = 0.00022805 Jy ! Component: 1500 - total flux cleaned = 0.000279412 Jy ! Component: 1550 - total flux cleaned = 0.000405619 Jy ! Component: 1600 - total flux cleaned = 0.000479762 Jy ! Component: 1650 - total flux cleaned = 0.00065105 Jy ! Component: 1700 - total flux cleaned = 0.000771721 Jy ! Component: 1750 - total flux cleaned = 0.000961814 Jy ! Component: 1800 - total flux cleaned = 0.00107833 Jy ! Component: 1850 - total flux cleaned = 0.00119322 Jy ! Component: 1900 - total flux cleaned = 0.00132928 Jy ! Component: 1950 - total flux cleaned = 0.00144079 Jy ! Component: 2000 - total flux cleaned = 0.0015073 Jy ! Component: 2050 - total flux cleaned = 0.00161556 Jy ! Component: 2100 - total flux cleaned = 0.00170086 Jy ! Component: 2150 - total flux cleaned = 0.0017636 Jy ! Component: 2200 - total flux cleaned = 0.00178457 Jy ! Component: 2250 - total flux cleaned = 0.00184594 Jy ! Component: 2300 - total flux cleaned = 0.00184603 Jy ! Component: 2350 - total flux cleaned = 0.00200647 Jy ! Component: 2400 - total flux cleaned = 0.00200631 Jy ! Component: 2450 - total flux cleaned = 0.00210407 Jy ! Component: 2500 - total flux cleaned = 0.00210407 Jy ! Component: 2550 - total flux cleaned = 0.00212332 Jy ! Component: 2600 - total flux cleaned = 0.00218016 Jy ! Component: 2650 - total flux cleaned = 0.00218052 Jy ! Component: 2700 - total flux cleaned = 0.00230954 Jy ! Component: 2750 - total flux cleaned = 0.00225478 Jy ! Component: 2800 - total flux cleaned = 0.00227298 Jy ! Component: 2850 - total flux cleaned = 0.00227304 Jy ! Component: 2900 - total flux cleaned = 0.00223762 Jy ! Component: 2950 - total flux cleaned = 0.00229031 Jy ! Component: 3000 - total flux cleaned = 0.00229014 Jy ! Component: 3050 - total flux cleaned = 0.00227271 Jy ! Component: 3100 - total flux cleaned = 0.0022726 Jy ! Component: 3150 - total flux cleaned = 0.00225588 Jy ! Component: 3200 - total flux cleaned = 0.00232274 Jy ! Component: 3250 - total flux cleaned = 0.00225636 Jy ! Component: 3300 - total flux cleaned = 0.00227284 Jy ! Component: 3350 - total flux cleaned = 0.00233797 Jy ! Component: 3400 - total flux cleaned = 0.00237046 Jy ! Component: 3450 - total flux cleaned = 0.00241862 Jy ! Component: 3500 - total flux cleaned = 0.00241869 Jy ! Component: 3550 - total flux cleaned = 0.00249777 Jy ! Component: 3600 - total flux cleaned = 0.00249779 Jy ! Component: 3650 - total flux cleaned = 0.0025447 Jy ! Component: 3700 - total flux cleaned = 0.002622 Jy ! Component: 3750 - total flux cleaned = 0.00260669 Jy ! Component: 3800 - total flux cleaned = 0.00265254 Jy ! Component: 3850 - total flux cleaned = 0.00268293 Jy ! Component: 3900 - total flux cleaned = 0.00269816 Jy ! Component: 3950 - total flux cleaned = 0.00278799 Jy ! Component: 4000 - total flux cleaned = 0.00278811 Jy ! Component: 4050 - total flux cleaned = 0.00286191 Jy ! Total flux subtracted in 4096 components = 0.00290603 Jy ! Clean residual min=-0.001001 max=0.000915 Jy/beam ! Clean residual mean=0.000002 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.38465 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 316 components and 0.38465 Jy ![Exited script file: muppet] wmap "J1845-2852_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.689 x 6.576 at -0.04 degrees (North through East) ! Clean map min=-0.0017901 max=0.31031 Jy/beam ! Writing clean map to FITS file: J1845-2852_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.310309 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000247 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.238795 0.238795 0.477589 0.955179 1.91036 3.82072 7.64143 15.2829 30.5657 61.1315 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.31 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.689 x 6.576 at -0.04 degrees (North through East) ! Clean map min=-0.0017901 max=0.31031 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1845-2852_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:34:34 2017