! Started logfile: J1831+2907_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:34:25 2017 obs J1831+2907_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1831+2907_S_2014_01_04_pus_uva.fits ! AN table 1: 124 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J1831+2907 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8928 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1831+2907_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.871334Jy sigma=0.013082 ! Fit after self-cal, rms=0.821371Jy sigma=0.011851 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.811 mas, bmaj=7.801 mas, bpa=14.09 degrees ! Estimated noise=1065.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.162855 Jy ! Component: 100 - total flux cleaned = 0.245283 Jy ! Total flux subtracted in 100 components = 0.245283 Jy ! Clean residual min=-0.046272 max=0.073969 Jy/beam ! Clean residual mean=0.000003 rms=0.018325 Jy/beam ! Combined flux in latest and established models = 0.245283 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.245283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.363865Jy sigma=0.005076 ! Fit after self-cal, rms=0.362788Jy sigma=0.005068 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=8.639 mas, bpa=12.85 degrees ! Estimated noise=524.218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120329 Jy ! Component: 100 - total flux cleaned = 0.168433 Jy ! Component: 150 - total flux cleaned = 0.171354 Jy ! Component: 200 - total flux cleaned = 0.170315 Jy ! Total flux subtracted in 200 components = 0.170315 Jy ! Clean residual min=-0.095096 max=0.130640 Jy/beam ! Clean residual mean=0.000120 rms=0.033467 Jy/beam ! Combined flux in latest and established models = 0.415598 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 29 components and 0.415598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324806Jy sigma=0.004388 ! Fit after self-cal, rms=0.322418Jy sigma=0.004367 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 1.00* KP 1.00* LA 1.05 ! MK 1.55 NL 1.60 OV 0.76 PT 1.41 ! SC 1.64 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* KP 1.00* LA 0.98 ! MK 2.09 NL 1.56 OV 0.79 PT 1.28 ! SC 1.45 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.00* KP 1.00* LA 0.77 ! MK 2.26 NL 1.45 OV 0.77 PT 1.13 ! SC 1.28 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 0.88 ! MK 2.42 NL 1.61 OV 0.78 PT 1.19 ! SC 1.08 ! ! ! Fit before self-cal, rms=0.322418Jy sigma=0.004367 ! Fit after self-cal, rms=0.442807Jy sigma=0.004080 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.177 mas, bmaj=9.235 mas, bpa=17.8 degrees ! Estimated noise=598.326 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00473967 Jy ! Component: 100 - total flux cleaned = 0.00580419 Jy ! Component: 150 - total flux cleaned = 0.00578372 Jy ! Component: 200 - total flux cleaned = 0.00712582 Jy ! Total flux subtracted in 200 components = 0.00712582 Jy ! Clean residual min=-0.087368 max=0.129063 Jy/beam ! Clean residual mean=0.000170 rms=0.034622 Jy/beam ! Combined flux in latest and established models = 0.422724 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 41 components and 0.422724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.437461Jy sigma=0.003988 ! Fit after self-cal, rms=0.438229Jy sigma=0.003983 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.438229Jy sigma=0.003983 ! Fit after self-cal, rms=0.567791Jy sigma=0.002893 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.696 mas, bmaj=9.316 mas, bpa=23.39 degrees ! Estimated noise=703.792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00281412 Jy ! Component: 100 - total flux cleaned = -0.00421876 Jy ! Component: 150 - total flux cleaned = -0.00499363 Jy ! Component: 200 - total flux cleaned = -0.00530262 Jy ! Total flux subtracted in 200 components = -0.00530262 Jy ! Clean residual min=-0.073508 max=0.103297 Jy/beam ! Clean residual mean=0.000338 rms=0.027022 Jy/beam ! Combined flux in latest and established models = 0.417421 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 0.417421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.564714Jy sigma=0.002899 ! Fit after self-cal, rms=0.567019Jy sigma=0.002888 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00320338 Jy ! Component: 100 - total flux cleaned = -0.00255054 Jy ! Component: 150 - total flux cleaned = -0.00281185 Jy ! Component: 200 - total flux cleaned = -0.00305164 Jy ! Total flux subtracted in 200 components = -0.00305164 Jy ! Clean residual min=-0.073299 max=0.102764 Jy/beam ! Clean residual mean=0.000333 rms=0.026966 Jy/beam ! Combined flux in latest and established models = 0.414369 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 0.414369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.564967Jy sigma=0.002897 ! Fit after self-cal, rms=0.565261Jy sigma=0.002892 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.565261Jy sigma=0.002892 ! Fit after self-cal, rms=0.576261Jy sigma=0.002877 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.017 mas, bmaj=9.35 mas, bpa=21.03 degrees ! Estimated noise=734.345 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00430962 Jy ! Component: 100 - total flux cleaned = -0.00561819 Jy ! Component: 150 - total flux cleaned = -0.00741807 Jy ! Component: 200 - total flux cleaned = -0.00804329 Jy ! Total flux subtracted in 200 components = -0.00804329 Jy ! Clean residual min=-0.077044 max=0.107331 Jy/beam ! Clean residual mean=0.000349 rms=0.028039 Jy/beam ! Combined flux in latest and established models = 0.406326 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 60 components and 0.406326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.573323Jy sigma=0.002887 ! Fit after self-cal, rms=0.573765Jy sigma=0.002884 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00246476 Jy ! Component: 100 - total flux cleaned = -0.00187749 Jy ! Component: 150 - total flux cleaned = -0.00239182 Jy ! Component: 200 - total flux cleaned = -0.00262402 Jy ! Total flux subtracted in 200 components = -0.00262402 Jy ! Clean residual min=-0.077648 max=0.106805 Jy/beam ! Clean residual mean=0.000346 rms=0.028099 Jy/beam ! Combined flux in latest and established models = 0.403702 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.403702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.571865Jy sigma=0.002892 ! Fit after self-cal, rms=0.572103Jy sigma=0.002889 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.572103Jy sigma=0.002889 ! Fit after self-cal, rms=0.600548Jy sigma=0.002874 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.58 mas, bmaj=11.14 mas, bpa=32.34 degrees ! Estimated noise=660.069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000511874 Jy ! Component: 100 - total flux cleaned = 0.000106098 Jy ! Component: 150 - total flux cleaned = 0.000509156 Jy ! Component: 200 - total flux cleaned = -0.000629237 Jy ! Total flux subtracted in 200 components = -0.000629237 Jy ! Clean residual min=-0.085381 max=0.118629 Jy/beam ! Clean residual mean=0.000512 rms=0.033732 Jy/beam ! Combined flux in latest and established models = 0.403073 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 65 components and 0.403073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.597607Jy sigma=0.002908 ! Fit after self-cal, rms=0.598050Jy sigma=0.002903 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0062312 Jy ! Component: 100 - total flux cleaned = -0.00576347 Jy ! Component: 150 - total flux cleaned = -0.00576077 Jy ! Component: 200 - total flux cleaned = -0.0055656 Jy ! Total flux subtracted in 200 components = -0.0055656 Jy ! Clean residual min=-0.085906 max=0.118721 Jy/beam ! Clean residual mean=0.000500 rms=0.033791 Jy/beam ! Combined flux in latest and established models = 0.397507 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 68 components and 0.397507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.597443Jy sigma=0.002917 ! Fit after self-cal, rms=0.598006Jy sigma=0.002915 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.296 mas, bmaj=9.431 mas, bpa=18.71 degrees ! Estimated noise=763.105 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.296 x 9.431 at 18.71 degrees (North through East) ! Clean map min=-0.08021 max=0.35094 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=8.614 mas, bpa=19.72 degrees ! Estimated noise=1950.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.261863 Jy ! Component: 100 - total flux cleaned = 0.327964 Jy ! Component: 150 - total flux cleaned = 0.325357 Jy ! Component: 200 - total flux cleaned = 0.321362 Jy ! Total flux subtracted in 200 components = 0.321362 Jy ! Clean residual min=-0.073846 max=0.098158 Jy/beam ! Clean residual mean=0.000212 rms=0.021796 Jy/beam ! Combined flux in latest and established models = 0.321362 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.321362 Jy ! Inverting map and beam ! Estimated beam: bmin=5.296 mas, bmaj=9.431 mas, bpa=18.71 degrees ! Estimated noise=763.105 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0685957 Jy ! Component: 100 - total flux cleaned = 0.0728013 Jy ! Component: 150 - total flux cleaned = 0.0687511 Jy ! Component: 200 - total flux cleaned = 0.0656368 Jy ! Total flux subtracted in 200 components = 0.0656368 Jy ! Clean residual min=-0.083790 max=0.111251 Jy/beam ! Clean residual mean=0.000367 rms=0.029669 Jy/beam ! Combined flux in latest and established models = 0.386999 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 0.386999 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.58 mas, bmaj=11.14 mas, bpa=32.34 degrees ! Estimated noise=660.069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00804046 Jy ! Component: 100 - total flux cleaned = 0.00860759 Jy ! Component: 150 - total flux cleaned = 0.00826031 Jy ! Component: 200 - total flux cleaned = 0.00718368 Jy ! Total flux subtracted in 200 components = 0.00718368 Jy ! Clean residual min=-0.086795 max=0.119771 Jy/beam ! Clean residual mean=0.000512 rms=0.034177 Jy/beam ! Combined flux in latest and established models = 0.394182 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00131561 Jy ! Component: 100 - total flux cleaned = -0.001624 Jy ! Component: 150 - total flux cleaned = -0.00133037 Jy ! Component: 200 - total flux cleaned = -0.00132859 Jy ! Total flux subtracted in 200 components = -0.00132859 Jy ! Clean residual min=-0.086532 max=0.119364 Jy/beam ! Clean residual mean=0.000507 rms=0.034111 Jy/beam ! Combined flux in latest and established models = 0.392854 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 43 components and 0.392854 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.296 mas, bmaj=9.431 mas, bpa=18.71 degrees ! Estimated noise=763.105 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00491255 Jy ! Component: 100 - total flux cleaned = -0.00634426 Jy ! Component: 150 - total flux cleaned = -0.00597083 Jy ! Component: 200 - total flux cleaned = -0.00630485 Jy ! Total flux subtracted in 200 components = -0.00630485 Jy ! Clean residual min=-0.082472 max=0.110471 Jy/beam ! Clean residual mean=0.000359 rms=0.029438 Jy/beam ! Combined flux in latest and established models = 0.386549 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.386549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.596631Jy sigma=0.002916 ! Fit after self-cal, rms=0.592714Jy sigma=0.002907 wmodel J1831+2907_S_2014_01_04_pus_map.mod ! Writing 52 model components to file: J1831+2907_S_2014_01_04_pus_map.mod wobs J1831+2907_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1831+2907_S_2014_01_04_pus_uvs.fits wwins J1831+2907_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1831+2907_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0475237 Jy ! Component: 100 - total flux cleaned = 0.0852061 Jy ! Component: 150 - total flux cleaned = 0.10348 Jy ! Component: 200 - total flux cleaned = 0.114008 Jy ! Component: 250 - total flux cleaned = 0.125212 Jy ! Component: 300 - total flux cleaned = 0.126409 Jy ! Component: 350 - total flux cleaned = 0.126405 Jy ! Component: 400 - total flux cleaned = 0.123167 Jy ! Component: 450 - total flux cleaned = 0.116884 Jy ! Component: 500 - total flux cleaned = 0.111818 Jy ! Component: 550 - total flux cleaned = 0.111808 Jy ! Component: 600 - total flux cleaned = 0.11277 Jy ! Component: 650 - total flux cleaned = 0.113694 Jy ! Component: 700 - total flux cleaned = 0.113696 Jy ! Component: 750 - total flux cleaned = 0.117222 Jy ! Component: 800 - total flux cleaned = 0.11895 Jy ! Component: 850 - total flux cleaned = 0.123177 Jy ! Component: 900 - total flux cleaned = 0.124835 Jy ! Component: 950 - total flux cleaned = 0.13052 Jy ! Component: 1000 - total flux cleaned = 0.136093 Jy ! Component: 1050 - total flux cleaned = 0.138426 Jy ! Component: 1100 - total flux cleaned = 0.139175 Jy ! Component: 1150 - total flux cleaned = 0.141413 Jy ! Component: 1200 - total flux cleaned = 0.143622 Jy ! Component: 1250 - total flux cleaned = 0.145075 Jy ! Component: 1300 - total flux cleaned = 0.14795 Jy ! Component: 1350 - total flux cleaned = 0.151461 Jy ! Component: 1400 - total flux cleaned = 0.15353 Jy ! Component: 1450 - total flux cleaned = 0.156242 Jy ! Component: 1500 - total flux cleaned = 0.159576 Jy ! Component: 1550 - total flux cleaned = 0.164196 Jy ! Component: 1600 - total flux cleaned = 0.169378 Jy ! Component: 1650 - total flux cleaned = 0.172568 Jy ! Component: 1700 - total flux cleaned = 0.17822 Jy ! Component: 1750 - total flux cleaned = 0.183158 Jy ! Component: 1800 - total flux cleaned = 0.189257 Jy ! Component: 1850 - total flux cleaned = 0.195271 Jy ! Component: 1900 - total flux cleaned = 0.202393 Jy ! Component: 1950 - total flux cleaned = 0.211162 Jy ! Component: 2000 - total flux cleaned = 0.218076 Jy ! Component: 2050 - total flux cleaned = 0.224897 Jy ! Component: 2100 - total flux cleaned = 0.230509 Jy ! Component: 2150 - total flux cleaned = 0.235508 Jy ! Component: 2200 - total flux cleaned = 0.242631 Jy ! Component: 2250 - total flux cleaned = 0.246957 Jy ! Component: 2300 - total flux cleaned = 0.251772 Jy ! Component: 2350 - total flux cleaned = 0.254949 Jy ! Component: 2400 - total flux cleaned = 0.259665 Jy ! Component: 2450 - total flux cleaned = 0.262251 Jy ! Component: 2500 - total flux cleaned = 0.264812 Jy ! Component: 2550 - total flux cleaned = 0.268868 Jy ! Component: 2600 - total flux cleaned = 0.271374 Jy ! Component: 2650 - total flux cleaned = 0.27435 Jy ! Component: 2700 - total flux cleaned = 0.27582 Jy ! Component: 2750 - total flux cleaned = 0.2763 Jy ! Component: 2800 - total flux cleaned = 0.275819 Jy ! Component: 2850 - total flux cleaned = 0.276782 Jy ! Component: 2900 - total flux cleaned = 0.277737 Jy ! Component: 2950 - total flux cleaned = 0.27679 Jy ! Component: 3000 - total flux cleaned = 0.276788 Jy ! Component: 3050 - total flux cleaned = 0.275855 Jy ! Component: 3100 - total flux cleaned = 0.275857 Jy ! Component: 3150 - total flux cleaned = 0.275394 Jy ! Component: 3200 - total flux cleaned = 0.274017 Jy ! Component: 3250 - total flux cleaned = 0.272648 Jy ! Component: 3300 - total flux cleaned = 0.272651 Jy ! Component: 3350 - total flux cleaned = 0.272652 Jy ! Component: 3400 - total flux cleaned = 0.273563 Jy ! Component: 3450 - total flux cleaned = 0.273111 Jy ! Component: 3500 - total flux cleaned = 0.271318 Jy ! Component: 3550 - total flux cleaned = 0.271767 Jy ! Component: 3600 - total flux cleaned = 0.270428 Jy ! Component: 3650 - total flux cleaned = 0.269538 Jy ! Component: 3700 - total flux cleaned = 0.268201 Jy ! Component: 3750 - total flux cleaned = 0.267315 Jy ! Component: 3800 - total flux cleaned = 0.266873 Jy ! Component: 3850 - total flux cleaned = 0.265989 Jy ! Component: 3900 - total flux cleaned = 0.265547 Jy ! Component: 3950 - total flux cleaned = 0.266431 Jy ! Component: 4000 - total flux cleaned = 0.265109 Jy ! Component: 4050 - total flux cleaned = 0.265548 Jy ! Total flux subtracted in 4096 components = 0.264666 Jy ! Clean residual min=-0.027293 max=0.031621 Jy/beam ! Clean residual mean=-0.000029 rms=0.009164 Jy/beam ! Combined flux in latest and established models = 0.651214 Jy keep ! Adding 333 model components to the UV plane model. ! The established model now contains 385 components and 0.651215 Jy ![Exited script file: muppet] wmap "J1831+2907_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.296 x 9.431 at 18.71 degrees (North through East) ! Clean map min=-0.065343 max=0.38883 Jy/beam ! Writing clean map to FITS file: J1831+2907_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.388834 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0096363 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -7.43476 7.43476 14.8695 29.739 59.4781 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0289 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.388 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.296 x 9.431 at 18.71 degrees (North through East) ! Clean map min=-0.065343 max=0.38883 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1831+2907_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:34:30 2017