! Started logfile: J1829+0518_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:33:29 2017 obs J1829+0518_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1829+0518_S_2015_01_23_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.984757 visibilities/baseline/integration-bin. ! Found source: J1829+0518 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 21448 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1829+0518_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.992764Jy sigma=0.010721 ! Fit after self-cal, rms=0.955096Jy sigma=0.010357 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.63 mas, bmaj=6.58 mas, bpa=-2.878 degrees ! Estimated noise=683.942 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0348422 Jy ! Component: 100 - total flux cleaned = 0.0437638 Jy ! Total flux subtracted in 100 components = 0.0437638 Jy ! Clean residual min=-0.002871 max=0.004267 Jy/beam ! Clean residual mean=0.000014 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.0437638 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0437638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091886Jy sigma=0.000802 ! Fit after self-cal, rms=0.091265Jy sigma=0.000795 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.179 mas, bmaj=7.441 mas, bpa=-2.149 degrees ! Estimated noise=462.285 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16, -20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00853568 Jy ! Component: 100 - total flux cleaned = 0.0141025 Jy ! Component: 150 - total flux cleaned = 0.0181157 Jy ! Component: 200 - total flux cleaned = 0.0211848 Jy ! Total flux subtracted in 200 components = 0.0211848 Jy ! Clean residual min=-0.002636 max=0.003674 Jy/beam ! Clean residual mean=0.000020 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.0649487 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 52 components and 0.0649487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090254Jy sigma=0.000783 ! Fit after self-cal, rms=0.090114Jy sigma=0.000781 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.99 KP 1.00 ! LA 0.88 MK 1.05 NL 1.05 OV 1.03 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.22 HN 1.05 KP 0.92 ! LA 0.86 MK 1.02 NL 1.24 OV 1.03 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.44 HN 1.08 KP 0.84 ! LA 0.70 MK 1.01 NL 1.43 OV 0.95 ! PT 0.91 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.06 HN 1.01 KP 0.77 ! LA 0.71 MK 1.09 NL 0.96 OV 1.00 ! PT 0.93 SC 1.00 ! ! ! Fit before self-cal, rms=0.090114Jy sigma=0.000781 ! Fit after self-cal, rms=0.093467Jy sigma=0.000774 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=7.598 mas, bpa=-1.951 degrees ! Estimated noise=454.803 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282363 Jy ! Component: 100 - total flux cleaned = 0.00355468 Jy ! Component: 150 - total flux cleaned = 0.00375007 Jy ! Component: 200 - total flux cleaned = 0.00395099 Jy ! Total flux subtracted in 200 components = 0.00395099 Jy ! Clean residual min=-0.001653 max=0.001771 Jy/beam ! Clean residual mean=0.000001 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0688997 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 72 components and 0.0688997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093380Jy sigma=0.000773 ! Fit after self-cal, rms=0.093500Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093500Jy sigma=0.000771 ! Fit after self-cal, rms=0.084494Jy sigma=0.000769 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=7.618 mas, bpa=-1.617 degrees ! Estimated noise=452.585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143227 Jy ! Component: 100 - total flux cleaned = 0.00165953 Jy ! Component: 150 - total flux cleaned = 0.00169297 Jy ! Component: 200 - total flux cleaned = 0.00171983 Jy ! Total flux subtracted in 200 components = 0.00171983 Jy ! Clean residual min=-0.001281 max=0.001653 Jy/beam ! Clean residual mean=0.000000 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.0706195 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 89 components and 0.0706195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084462Jy sigma=0.000769 ! Fit after self-cal, rms=0.084396Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25.5, 94). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000840298 Jy ! Component: 100 - total flux cleaned = 0.00111477 Jy ! Component: 150 - total flux cleaned = 0.00124227 Jy ! Component: 200 - total flux cleaned = 0.00132695 Jy ! Total flux subtracted in 200 components = 0.00132695 Jy ! Clean residual min=-0.001304 max=0.001305 Jy/beam ! Clean residual mean=0.000000 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.0719464 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 106 components and 0.0719465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084358Jy sigma=0.000768 ! Fit after self-cal, rms=0.084358Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084358Jy sigma=0.000768 ! Fit after self-cal, rms=0.083315Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=7.614 mas, bpa=-1.513 degrees ! Estimated noise=451.678 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000758406 Jy ! Component: 100 - total flux cleaned = 0.000913726 Jy ! Component: 150 - total flux cleaned = 0.00101937 Jy ! Component: 200 - total flux cleaned = 0.00109139 Jy ! Total flux subtracted in 200 components = 0.00109139 Jy ! Clean residual min=-0.001215 max=0.001236 Jy/beam ! Clean residual mean=0.000000 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.0730379 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 110 components and 0.0730379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083292Jy sigma=0.000768 ! Fit after self-cal, rms=0.083273Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000243999 Jy ! Component: 100 - total flux cleaned = 0.000219726 Jy ! Component: 150 - total flux cleaned = 0.000240383 Jy ! Component: 200 - total flux cleaned = 0.000278276 Jy ! Total flux subtracted in 200 components = 0.000278276 Jy ! Clean residual min=-0.001211 max=0.001236 Jy/beam ! Clean residual mean=0.000000 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.0733161 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 119 components and 0.0733161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083259Jy sigma=0.000768 ! Fit after self-cal, rms=0.083259Jy sigma=0.000768 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083259Jy sigma=0.000768 ! Fit after self-cal, rms=0.082747Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.359 mas, bmaj=11.68 mas, bpa=-5.152 degrees ! Estimated noise=555.311 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000520202 Jy ! Component: 100 - total flux cleaned = 0.000638418 Jy ! Component: 150 - total flux cleaned = 0.000671335 Jy ! Component: 200 - total flux cleaned = 0.000656564 Jy ! Total flux subtracted in 200 components = 0.000656564 Jy ! Clean residual min=-0.001273 max=0.001406 Jy/beam ! Clean residual mean=0.000002 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.0739727 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 148 components and 0.0739727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082742Jy sigma=0.000768 ! Fit after self-cal, rms=0.082730Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171876 Jy ! Component: 100 - total flux cleaned = 0.00018781 Jy ! Component: 150 - total flux cleaned = 0.000174472 Jy ! Component: 200 - total flux cleaned = 0.000162252 Jy ! Total flux subtracted in 200 components = 0.000162252 Jy ! Clean residual min=-0.001251 max=0.001369 Jy/beam ! Clean residual mean=0.000002 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0741349 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 160 components and 0.0741349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082727Jy sigma=0.000768 ! Fit after self-cal, rms=0.082721Jy sigma=0.000768 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.289 mas, bmaj=7.608 mas, bpa=-1.481 degrees ! Estimated noise=451.035 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.289 x 7.608 at -1.481 degrees (North through East) ! Clean map min=-0.0019491 max=0.04723 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.706 mas, bmaj=6.688 mas, bpa=-2.203 degrees ! Estimated noise=684.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0350005 Jy ! Component: 100 - total flux cleaned = 0.0453516 Jy ! Component: 150 - total flux cleaned = 0.0520292 Jy ! Component: 200 - total flux cleaned = 0.0570034 Jy ! Total flux subtracted in 200 components = 0.0570034 Jy ! Clean residual min=-0.002439 max=0.002865 Jy/beam ! Clean residual mean=0.000006 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.0570034 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0570034 Jy ! Inverting map and beam ! Estimated beam: bmin=3.289 mas, bmaj=7.608 mas, bpa=-1.481 degrees ! Estimated noise=451.035 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00516007 Jy ! Component: 100 - total flux cleaned = 0.00857057 Jy ! Component: 150 - total flux cleaned = 0.0111308 Jy ! Component: 200 - total flux cleaned = 0.0130996 Jy ! Total flux subtracted in 200 components = 0.0130996 Jy ! Clean residual min=-0.001600 max=0.001557 Jy/beam ! Clean residual mean=0.000005 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0701029 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 54 components and 0.0701029 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.359 mas, bmaj=11.68 mas, bpa=-5.152 degrees ! Estimated noise=555.311 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212019 Jy ! Component: 100 - total flux cleaned = 0.0028965 Jy ! Component: 150 - total flux cleaned = 0.00307121 Jy ! Component: 200 - total flux cleaned = 0.0031787 Jy ! Total flux subtracted in 200 components = 0.0031787 Jy ! Clean residual min=-0.001420 max=0.001479 Jy/beam ! Clean residual mean=0.000005 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0732816 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121846 Jy ! Component: 100 - total flux cleaned = 0.000199791 Jy ! Component: 150 - total flux cleaned = 0.000313254 Jy ! Component: 200 - total flux cleaned = 0.00041336 Jy ! Total flux subtracted in 200 components = 0.00041336 Jy ! Clean residual min=-0.001264 max=0.001383 Jy/beam ! Clean residual mean=0.000004 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.073695 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 94 components and 0.073695 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.289 mas, bmaj=7.608 mas, bpa=-1.481 degrees ! Estimated noise=451.035 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000488234 Jy ! Component: 100 - total flux cleaned = -0.000453393 Jy ! Component: 150 - total flux cleaned = -0.000352879 Jy ! Component: 200 - total flux cleaned = -0.000261415 Jy ! Total flux subtracted in 200 components = -0.000261415 Jy ! Clean residual min=-0.001301 max=0.001307 Jy/beam ! Clean residual mean=0.000001 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.0734336 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 108 components and 0.0734336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082753Jy sigma=0.000768 ! Fit after self-cal, rms=0.082729Jy sigma=0.000768 wmodel J1829+0518_S_2015_01_23_pus_map.mod ! Writing 108 model components to file: J1829+0518_S_2015_01_23_pus_map.mod wobs J1829+0518_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1829+0518_S_2015_01_23_pus_uvs.fits wwins J1829+0518_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J1829+0518_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118584 Jy ! Component: 100 - total flux cleaned = 0.000246504 Jy ! Component: 150 - total flux cleaned = 0.000425758 Jy ! Component: 200 - total flux cleaned = 0.000579696 Jy ! Component: 250 - total flux cleaned = 0.000635594 Jy ! Component: 300 - total flux cleaned = 0.000708501 Jy ! Component: 350 - total flux cleaned = 0.00083276 Jy ! Component: 400 - total flux cleaned = 0.000919199 Jy ! Component: 450 - total flux cleaned = 0.000987318 Jy ! Component: 500 - total flux cleaned = 0.00103731 Jy ! Component: 550 - total flux cleaned = 0.00107007 Jy ! Component: 600 - total flux cleaned = 0.00113496 Jy ! Component: 650 - total flux cleaned = 0.00118262 Jy ! Component: 700 - total flux cleaned = 0.00124558 Jy ! Component: 750 - total flux cleaned = 0.00133809 Jy ! Component: 800 - total flux cleaned = 0.00141411 Jy ! Component: 850 - total flux cleaned = 0.00141413 Jy ! Component: 900 - total flux cleaned = 0.00150308 Jy ! Component: 950 - total flux cleaned = 0.00159077 Jy ! Component: 1000 - total flux cleaned = 0.00156175 Jy ! Component: 1050 - total flux cleaned = 0.00160468 Jy ! Component: 1100 - total flux cleaned = 0.00166111 Jy ! Component: 1150 - total flux cleaned = 0.00173071 Jy ! Component: 1200 - total flux cleaned = 0.00174466 Jy ! Component: 1250 - total flux cleaned = 0.00179906 Jy ! Component: 1300 - total flux cleaned = 0.00185291 Jy ! Component: 1350 - total flux cleaned = 0.00190595 Jy ! Component: 1400 - total flux cleaned = 0.00194538 Jy ! Component: 1450 - total flux cleaned = 0.00194534 Jy ! Component: 1500 - total flux cleaned = 0.00198412 Jy ! Component: 1550 - total flux cleaned = 0.00204793 Jy ! Component: 1600 - total flux cleaned = 0.00197196 Jy ! Component: 1650 - total flux cleaned = 0.0020221 Jy ! Component: 1700 - total flux cleaned = 0.00202206 Jy ! Component: 1750 - total flux cleaned = 0.00200973 Jy ! Component: 1800 - total flux cleaned = 0.00203407 Jy ! Component: 1850 - total flux cleaned = 0.00208219 Jy ! Component: 1900 - total flux cleaned = 0.00203442 Jy ! Component: 1950 - total flux cleaned = 0.00211734 Jy ! Component: 2000 - total flux cleaned = 0.00209376 Jy ! Component: 2050 - total flux cleaned = 0.0021054 Jy ! Component: 2100 - total flux cleaned = 0.00212839 Jy ! Component: 2150 - total flux cleaned = 0.00210552 Jy ! Component: 2200 - total flux cleaned = 0.00210554 Jy ! Component: 2250 - total flux cleaned = 0.00207183 Jy ! Component: 2300 - total flux cleaned = 0.00208294 Jy ! Component: 2350 - total flux cleaned = 0.00208286 Jy ! Component: 2400 - total flux cleaned = 0.00210488 Jy ! Component: 2450 - total flux cleaned = 0.00208312 Jy ! Component: 2500 - total flux cleaned = 0.00208326 Jy ! Component: 2550 - total flux cleaned = 0.00214753 Jy ! Component: 2600 - total flux cleaned = 0.00211569 Jy ! Component: 2650 - total flux cleaned = 0.00214736 Jy ! Component: 2700 - total flux cleaned = 0.0021368 Jy ! Component: 2750 - total flux cleaned = 0.00214706 Jy ! Component: 2800 - total flux cleaned = 0.00211605 Jy ! Component: 2850 - total flux cleaned = 0.0021263 Jy ! Component: 2900 - total flux cleaned = 0.00216701 Jy ! Component: 2950 - total flux cleaned = 0.0021771 Jy ! Component: 3000 - total flux cleaned = 0.00217701 Jy ! Component: 3050 - total flux cleaned = 0.00213724 Jy ! Component: 3100 - total flux cleaned = 0.00218676 Jy ! Component: 3150 - total flux cleaned = 0.00215733 Jy ! Component: 3200 - total flux cleaned = 0.0021671 Jy ! Component: 3250 - total flux cleaned = 0.00213809 Jy ! Component: 3300 - total flux cleaned = 0.00216709 Jy ! Component: 3350 - total flux cleaned = 0.00216702 Jy ! Component: 3400 - total flux cleaned = 0.002167 Jy ! Component: 3450 - total flux cleaned = 0.00216696 Jy ! Component: 3500 - total flux cleaned = 0.00213883 Jy ! Component: 3550 - total flux cleaned = 0.00213878 Jy ! Component: 3600 - total flux cleaned = 0.00212023 Jy ! Component: 3650 - total flux cleaned = 0.00209268 Jy ! Component: 3700 - total flux cleaned = 0.00211097 Jy ! Component: 3750 - total flux cleaned = 0.00206553 Jy ! Component: 3800 - total flux cleaned = 0.00204753 Jy ! Component: 3850 - total flux cleaned = 0.00199369 Jy ! Component: 3900 - total flux cleaned = 0.00200264 Jy ! Component: 3950 - total flux cleaned = 0.00204704 Jy ! Component: 4000 - total flux cleaned = 0.00199406 Jy ! Component: 4050 - total flux cleaned = 0.00201164 Jy ! Total flux subtracted in 4096 components = 0.00197676 Jy ! Clean residual min=-0.000551 max=0.000534 Jy/beam ! Clean residual mean=0.000000 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.0754103 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 400 components and 0.0754103 Jy ![Exited script file: muppet] wmap "J1829+0518_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.289 x 7.608 at -1.481 degrees (North through East) ! Clean map min=-0.0012926 max=0.047159 Jy/beam ! Writing clean map to FITS file: J1829+0518_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0471593 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000162919 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03639 1.03639 2.07279 4.14558 8.29115 16.5823 33.1646 66.3292 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.047 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.289 x 7.608 at -1.481 degrees (North through East) ! Clean map min=-0.0012926 max=0.047159 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1829+0518_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:33:34 2017