! Started logfile: J1827+2658_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:34:21 2017 obs J1827+2658_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1827+2658_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J1827+2658 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1827+2658_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.837163Jy sigma=0.012661 ! Fit after self-cal, rms=0.830288Jy sigma=0.012551 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=7.864 mas, bpa=12.15 degrees ! Estimated noise=1050.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125789 Jy ! Component: 100 - total flux cleaned = 0.156771 Jy ! Total flux subtracted in 100 components = 0.156771 Jy ! Clean residual min=-0.009928 max=0.013129 Jy/beam ! Clean residual mean=-0.000022 rms=0.002801 Jy/beam ! Combined flux in latest and established models = 0.156771 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.156771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086123Jy sigma=0.001085 ! Fit after self-cal, rms=0.085955Jy sigma=0.001083 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.611 mas, bmaj=8.583 mas, bpa=12.38 degrees ! Estimated noise=673.861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221882 Jy ! Component: 100 - total flux cleaned = 0.0338474 Jy ! Component: 150 - total flux cleaned = 0.0409031 Jy ! Component: 200 - total flux cleaned = 0.045635 Jy ! Total flux subtracted in 200 components = 0.045635 Jy ! Clean residual min=-0.010062 max=0.011514 Jy/beam ! Clean residual mean=0.000006 rms=0.002866 Jy/beam ! Combined flux in latest and established models = 0.202406 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.202406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079271Jy sigma=0.000999 ! Fit after self-cal, rms=0.078897Jy sigma=0.000998 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* KP 1.00* LA 0.97 ! MK 1.00 NL 1.01 OV 0.98 PT 0.97 ! SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 0.91 ! MK 0.99 NL 1.09 OV 1.04 PT 0.96 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 0.76 ! MK 1.00 NL 1.03 OV 0.96 PT 0.90 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* KP 1.00* LA 0.84 ! MK 1.02 NL 1.09 OV 1.00 PT 0.99 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.078897Jy sigma=0.000998 ! Fit after self-cal, rms=0.073454Jy sigma=0.000950 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.656 mas, bmaj=8.746 mas, bpa=12.17 degrees ! Estimated noise=669.836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00313803 Jy ! Component: 100 - total flux cleaned = -0.00431773 Jy ! Component: 150 - total flux cleaned = -0.00463047 Jy ! Component: 200 - total flux cleaned = -0.00483893 Jy ! Total flux subtracted in 200 components = -0.00483893 Jy ! Clean residual min=-0.007238 max=0.010111 Jy/beam ! Clean residual mean=0.000005 rms=0.002322 Jy/beam ! Combined flux in latest and established models = 0.197567 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.197567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073277Jy sigma=0.000948 ! Fit after self-cal, rms=0.073051Jy sigma=0.000948 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073051Jy sigma=0.000948 ! Fit after self-cal, rms=0.073237Jy sigma=0.000943 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.657 mas, bmaj=8.724 mas, bpa=12.45 degrees ! Estimated noise=669.362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118032 Jy ! Component: 100 - total flux cleaned = -0.00126327 Jy ! Component: 150 - total flux cleaned = -0.00129805 Jy ! Component: 200 - total flux cleaned = -0.00136297 Jy ! Total flux subtracted in 200 components = -0.00136297 Jy ! Clean residual min=-0.006528 max=0.010221 Jy/beam ! Clean residual mean=0.000026 rms=0.002219 Jy/beam ! Combined flux in latest and established models = 0.196204 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 0.196204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073169Jy sigma=0.000943 ! Fit after self-cal, rms=0.073126Jy sigma=0.000943 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-50.5, -105.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00965261 Jy ! Component: 100 - total flux cleaned = 0.0155199 Jy ! Component: 150 - total flux cleaned = 0.0198965 Jy ! Component: 200 - total flux cleaned = 0.0233204 Jy ! Total flux subtracted in 200 components = 0.0233204 Jy ! Clean residual min=-0.005325 max=0.005206 Jy/beam ! Clean residual mean=-0.000000 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 0.219524 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 122 components and 0.219524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071833Jy sigma=0.000915 ! Fit after self-cal, rms=0.071839Jy sigma=0.000914 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071839Jy sigma=0.000914 ! Fit after self-cal, rms=0.072063Jy sigma=0.000912 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.678 mas, bmaj=8.773 mas, bpa=12.41 degrees ! Estimated noise=663.507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371205 Jy ! Component: 100 - total flux cleaned = 0.00582511 Jy ! Component: 150 - total flux cleaned = 0.00732923 Jy ! Component: 200 - total flux cleaned = 0.00848477 Jy ! Total flux subtracted in 200 components = 0.00848477 Jy ! Clean residual min=-0.004165 max=0.004615 Jy/beam ! Clean residual mean=0.000002 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.228009 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 148 components and 0.228009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071821Jy sigma=0.000907 ! Fit after self-cal, rms=0.071820Jy sigma=0.000907 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20.5, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180019 Jy ! Component: 100 - total flux cleaned = 0.00214271 Jy ! Component: 150 - total flux cleaned = 0.00276344 Jy ! Component: 200 - total flux cleaned = 0.00324021 Jy ! Total flux subtracted in 200 components = 0.00324021 Jy ! Clean residual min=-0.003060 max=0.003260 Jy/beam ! Clean residual mean=-0.000002 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.231249 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 174 components and 0.231249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071510Jy sigma=0.000902 ! Fit after self-cal, rms=0.071495Jy sigma=0.000902 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071495Jy sigma=0.000902 ! Fit after self-cal, rms=0.071514Jy sigma=0.000901 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.654 mas, bmaj=10.96 mas, bpa=12.63 degrees ! Estimated noise=730.197 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000771693 Jy ! Component: 100 - total flux cleaned = 0.00139857 Jy ! Component: 150 - total flux cleaned = 0.00201145 Jy ! Component: 200 - total flux cleaned = 0.00260169 Jy ! Total flux subtracted in 200 components = 0.00260169 Jy ! Clean residual min=-0.002736 max=0.002865 Jy/beam ! Clean residual mean=-0.000003 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.233851 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 198 components and 0.233851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071422Jy sigma=0.000900 ! Fit after self-cal, rms=0.071409Jy sigma=0.000900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319444 Jy ! Component: 100 - total flux cleaned = 0.000683355 Jy ! Component: 150 - total flux cleaned = 0.00092712 Jy ! Component: 200 - total flux cleaned = 0.00114032 Jy ! Total flux subtracted in 200 components = 0.00114032 Jy ! Clean residual min=-0.002559 max=0.002643 Jy/beam ! Clean residual mean=-0.000006 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.234991 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 212 components and 0.234991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071379Jy sigma=0.000900 ! Fit after self-cal, rms=0.071379Jy sigma=0.000900 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.678 mas, bmaj=8.79 mas, bpa=12.36 degrees ! Estimated noise=661.341 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.678 x 8.79 at 12.36 degrees (North through East) ! Clean map min=-0.003187 max=0.1659 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.923 mas, bmaj=8.03 mas, bpa=12.17 degrees ! Estimated noise=1054.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126287 Jy ! Component: 100 - total flux cleaned = 0.157154 Jy ! Component: 150 - total flux cleaned = 0.170373 Jy ! Component: 200 - total flux cleaned = 0.177099 Jy ! Total flux subtracted in 200 components = 0.177099 Jy ! Clean residual min=-0.006268 max=0.008415 Jy/beam ! Clean residual mean=0.000016 rms=0.001736 Jy/beam ! Combined flux in latest and established models = 0.177099 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.177099 Jy ! Inverting map and beam ! Estimated beam: bmin=3.678 mas, bmaj=8.79 mas, bpa=12.36 degrees ! Estimated noise=661.341 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00998479 Jy ! Component: 100 - total flux cleaned = 0.0150736 Jy ! Component: 150 - total flux cleaned = 0.0193939 Jy ! Component: 200 - total flux cleaned = 0.0232162 Jy ! Total flux subtracted in 200 components = 0.0232162 Jy ! Clean residual min=-0.005310 max=0.006006 Jy/beam ! Clean residual mean=0.000010 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 0.200316 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 60 components and 0.200316 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.654 mas, bmaj=10.96 mas, bpa=12.63 degrees ! Estimated noise=730.197 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00705947 Jy ! Component: 100 - total flux cleaned = 0.0119577 Jy ! Component: 150 - total flux cleaned = 0.0158391 Jy ! Component: 200 - total flux cleaned = 0.019249 Jy ! Total flux subtracted in 200 components = 0.019249 Jy ! Clean residual min=-0.004278 max=0.004642 Jy/beam ! Clean residual mean=0.000004 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 0.219565 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276259 Jy ! Component: 100 - total flux cleaned = 0.00501246 Jy ! Component: 150 - total flux cleaned = 0.00694454 Jy ! Component: 200 - total flux cleaned = 0.00822923 Jy ! Total flux subtracted in 200 components = 0.00822923 Jy ! Clean residual min=-0.003143 max=0.003376 Jy/beam ! Clean residual mean=-0.000002 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.227794 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 148 components and 0.227794 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.678 mas, bmaj=8.79 mas, bpa=12.36 degrees ! Estimated noise=661.341 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000285269 Jy ! Component: 100 - total flux cleaned = -0.00028848 Jy ! Component: 150 - total flux cleaned = -0.00029328 Jy ! Component: 200 - total flux cleaned = -0.000162478 Jy ! Total flux subtracted in 200 components = -0.000162478 Jy ! Clean residual min=-0.002763 max=0.002921 Jy/beam ! Clean residual mean=-0.000003 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.227631 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 171 components and 0.227631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071503Jy sigma=0.000901 ! Fit after self-cal, rms=0.071500Jy sigma=0.000901 wmodel J1827+2658_S_2014_01_04_pus_map.mod ! Writing 171 model components to file: J1827+2658_S_2014_01_04_pus_map.mod wobs J1827+2658_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1827+2658_S_2014_01_04_pus_uvs.fits wwins J1827+2658_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1827+2658_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000994799 Jy ! Component: 100 - total flux cleaned = 0.00151203 Jy ! Component: 150 - total flux cleaned = 0.00203319 Jy ! Component: 200 - total flux cleaned = 0.00239944 Jy ! Component: 250 - total flux cleaned = 0.00270784 Jy ! Component: 300 - total flux cleaned = 0.00292695 Jy ! Component: 350 - total flux cleaned = 0.00303023 Jy ! Component: 400 - total flux cleaned = 0.00319386 Jy ! Component: 450 - total flux cleaned = 0.00338233 Jy ! Component: 500 - total flux cleaned = 0.0035326 Jy ! Component: 550 - total flux cleaned = 0.00367675 Jy ! Component: 600 - total flux cleaned = 0.00378832 Jy ! Component: 650 - total flux cleaned = 0.00392165 Jy ! Component: 700 - total flux cleaned = 0.00394668 Jy ! Component: 750 - total flux cleaned = 0.00399741 Jy ! Component: 800 - total flux cleaned = 0.00402235 Jy ! Component: 850 - total flux cleaned = 0.00411752 Jy ! Component: 900 - total flux cleaned = 0.00418604 Jy ! Component: 950 - total flux cleaned = 0.0041641 Jy ! Component: 1000 - total flux cleaned = 0.00418533 Jy ! Component: 1050 - total flux cleaned = 0.00418546 Jy ! Component: 1100 - total flux cleaned = 0.00430918 Jy ! Component: 1150 - total flux cleaned = 0.0042478 Jy ! Component: 1200 - total flux cleaned = 0.00416809 Jy ! Component: 1250 - total flux cleaned = 0.00418795 Jy ! Component: 1300 - total flux cleaned = 0.00420718 Jy ! Component: 1350 - total flux cleaned = 0.00418809 Jy ! Component: 1400 - total flux cleaned = 0.00413249 Jy ! Component: 1450 - total flux cleaned = 0.00415068 Jy ! Component: 1500 - total flux cleaned = 0.00402538 Jy ! Component: 1550 - total flux cleaned = 0.00406089 Jy ! Component: 1600 - total flux cleaned = 0.00402616 Jy ! Component: 1650 - total flux cleaned = 0.00397446 Jy ! Component: 1700 - total flux cleaned = 0.0039913 Jy ! Component: 1750 - total flux cleaned = 0.00389169 Jy ! Component: 1800 - total flux cleaned = 0.0039573 Jy ! Component: 1850 - total flux cleaned = 0.0037797 Jy ! Component: 1900 - total flux cleaned = 0.00374788 Jy ! Component: 1950 - total flux cleaned = 0.00363766 Jy ! Component: 2000 - total flux cleaned = 0.00356031 Jy ! Component: 2050 - total flux cleaned = 0.0035451 Jy ! Component: 2100 - total flux cleaned = 0.00346942 Jy ! Component: 2150 - total flux cleaned = 0.00345432 Jy ! Component: 2200 - total flux cleaned = 0.00333647 Jy ! Component: 2250 - total flux cleaned = 0.00330742 Jy ! Component: 2300 - total flux cleaned = 0.00324981 Jy ! Component: 2350 - total flux cleaned = 0.00315019 Jy ! Component: 2400 - total flux cleaned = 0.003122 Jy ! Component: 2450 - total flux cleaned = 0.00308007 Jy ! Component: 2500 - total flux cleaned = 0.0030663 Jy ! Component: 2550 - total flux cleaned = 0.00303892 Jy ! Component: 2600 - total flux cleaned = 0.00298499 Jy ! Component: 2650 - total flux cleaned = 0.00297166 Jy ! Component: 2700 - total flux cleaned = 0.00291845 Jy ! Component: 2750 - total flux cleaned = 0.00282645 Jy ! Component: 2800 - total flux cleaned = 0.00277434 Jy ! Component: 2850 - total flux cleaned = 0.0026838 Jy ! Component: 2900 - total flux cleaned = 0.00265819 Jy ! Component: 2950 - total flux cleaned = 0.0026199 Jy ! Component: 3000 - total flux cleaned = 0.00253139 Jy ! Component: 3050 - total flux cleaned = 0.0024688 Jy ! Component: 3100 - total flux cleaned = 0.00240673 Jy ! Component: 3150 - total flux cleaned = 0.00235732 Jy ! Component: 3200 - total flux cleaned = 0.00225964 Jy ! Component: 3250 - total flux cleaned = 0.00223538 Jy ! Component: 3300 - total flux cleaned = 0.00216325 Jy ! Component: 3350 - total flux cleaned = 0.00213938 Jy ! Component: 3400 - total flux cleaned = 0.0021037 Jy ! Component: 3450 - total flux cleaned = 0.0020564 Jy ! Component: 3500 - total flux cleaned = 0.00202119 Jy ! Component: 3550 - total flux cleaned = 0.00195117 Jy ! Component: 3600 - total flux cleaned = 0.00190491 Jy ! Component: 3650 - total flux cleaned = 0.00183576 Jy ! Component: 3700 - total flux cleaned = 0.0017784 Jy ! Component: 3750 - total flux cleaned = 0.00170987 Jy ! Component: 3800 - total flux cleaned = 0.00164156 Jy ! Component: 3850 - total flux cleaned = 0.0015624 Jy ! Component: 3900 - total flux cleaned = 0.00150603 Jy ! Component: 3950 - total flux cleaned = 0.00144995 Jy ! Component: 4000 - total flux cleaned = 0.0014164 Jy ! Component: 4050 - total flux cleaned = 0.00133855 Jy ! Total flux subtracted in 4096 components = 0.0012721 Jy ! Clean residual min=-0.000585 max=0.000583 Jy/beam ! Clean residual mean=-0.000003 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.228904 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 454 components and 0.228904 Jy ![Exited script file: muppet] wmap "J1827+2658_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.678 x 8.79 at 12.36 degrees (North through East) ! Clean map min=-0.0025838 max=0.16585 Jy/beam ! Writing clean map to FITS file: J1827+2658_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.165855 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000191771 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.346878 0.346878 0.693756 1.38751 2.77502 5.55005 11.1001 22.2002 44.4004 88.8007 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.165 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.678 x 8.79 at 12.36 degrees (North through East) ! Clean map min=-0.0025838 max=0.16585 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1827+2658_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:34:25 2017