! Started logfile: J1827+2638_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:34:16 2017 obs J1827+2638_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1827+2638_S_2014_01_04_pus_uva.fits ! AN table 1: 98 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J1827+2638 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7056 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1827+2638_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.926465Jy sigma=0.014188 ! Fit after self-cal, rms=0.900296Jy sigma=0.013690 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=7.595 mas, bpa=12.44 degrees ! Estimated noise=986.542 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0784854 Jy ! Component: 100 - total flux cleaned = 0.0956506 Jy ! Total flux subtracted in 100 components = 0.0956506 Jy ! Clean residual min=-0.004435 max=0.005138 Jy/beam ! Clean residual mean=-0.000009 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.0956506 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0956506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072112Jy sigma=0.000903 ! Fit after self-cal, rms=0.072140Jy sigma=0.000903 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.612 mas, bmaj=8.57 mas, bpa=12.52 degrees ! Estimated noise=591.291 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00481682 Jy ! Component: 100 - total flux cleaned = 0.00720747 Jy ! Component: 150 - total flux cleaned = 0.00798341 Jy ! Component: 200 - total flux cleaned = 0.00837636 Jy ! Total flux subtracted in 200 components = 0.00837636 Jy ! Clean residual min=-0.002658 max=0.002717 Jy/beam ! Clean residual mean=-0.000007 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.104027 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 15 components and 0.104027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071652Jy sigma=0.000899 ! Fit after self-cal, rms=0.071596Jy sigma=0.000899 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 1.02 ! MK 1.03 NL 0.98 OV 0.99 PT 1.01 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 0.98 ! MK 1.01 NL 1.03 OV 0.99 PT 1.00 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* KP 1.00* LA 0.82 ! MK 1.00 NL 0.97 OV 0.98 PT 0.97 ! SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 0.89 ! MK 0.97 NL 1.07 OV 1.03 PT 1.04 ! SC 0.87 ! ! ! Fit before self-cal, rms=0.071596Jy sigma=0.000899 ! Fit after self-cal, rms=0.067640Jy sigma=0.000889 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.573 mas, bmaj=8.629 mas, bpa=12.84 degrees ! Estimated noise=586.426 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000727866 Jy ! Component: 100 - total flux cleaned = -0.000852993 Jy ! Component: 150 - total flux cleaned = -0.000926731 Jy ! Component: 200 - total flux cleaned = -0.000977758 Jy ! Total flux subtracted in 200 components = -0.000977758 Jy ! Clean residual min=-0.002378 max=0.002374 Jy/beam ! Clean residual mean=-0.000011 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.103049 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.103049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067625Jy sigma=0.000889 ! Fit after self-cal, rms=0.067371Jy sigma=0.000888 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067371Jy sigma=0.000888 ! Fit after self-cal, rms=0.067592Jy sigma=0.000887 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.568 mas, bmaj=8.634 mas, bpa=12.91 degrees ! Estimated noise=585.189 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00059143 Jy ! Component: 100 - total flux cleaned = -0.000734487 Jy ! Component: 150 - total flux cleaned = -0.000816337 Jy ! Component: 200 - total flux cleaned = -0.000878705 Jy ! Total flux subtracted in 200 components = -0.000878705 Jy ! Clean residual min=-0.001998 max=0.002262 Jy/beam ! Clean residual mean=-0.000009 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.102171 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 40 components and 0.102171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067582Jy sigma=0.000887 ! Fit after self-cal, rms=0.067583Jy sigma=0.000887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.93074e-05 Jy ! Component: 100 - total flux cleaned = -0.000116523 Jy ! Component: 150 - total flux cleaned = -0.000148726 Jy ! Component: 200 - total flux cleaned = -0.000186334 Jy ! Total flux subtracted in 200 components = -0.000186334 Jy ! Clean residual min=-0.001981 max=0.002260 Jy/beam ! Clean residual mean=-0.000010 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.101984 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.101984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067578Jy sigma=0.000887 ! Fit after self-cal, rms=0.067582Jy sigma=0.000887 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067582Jy sigma=0.000887 ! Fit after self-cal, rms=0.067575Jy sigma=0.000887 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.569 mas, bmaj=8.64 mas, bpa=12.95 degrees ! Estimated noise=584.786 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00032323 Jy ! Component: 100 - total flux cleaned = -0.000385221 Jy ! Component: 150 - total flux cleaned = -0.000434297 Jy ! Component: 200 - total flux cleaned = -0.000487437 Jy ! Total flux subtracted in 200 components = -0.000487437 Jy ! Clean residual min=-0.001968 max=0.002234 Jy/beam ! Clean residual mean=-0.000009 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.101497 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.101497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067570Jy sigma=0.000887 ! Fit after self-cal, rms=0.067561Jy sigma=0.000887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.8518e-05 Jy ! Component: 100 - total flux cleaned = -7.7314e-05 Jy ! Component: 150 - total flux cleaned = -0.000102954 Jy ! Component: 200 - total flux cleaned = -0.000126911 Jy ! Total flux subtracted in 200 components = -0.000126911 Jy ! Clean residual min=-0.001960 max=0.002243 Jy/beam ! Clean residual mean=-0.000009 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.10137 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.10137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067558Jy sigma=0.000887 ! Fit after self-cal, rms=0.067561Jy sigma=0.000887 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067561Jy sigma=0.000887 ! Fit after self-cal, rms=0.067540Jy sigma=0.000887 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.412 mas, bmaj=10.83 mas, bpa=12.7 degrees ! Estimated noise=668.037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00016851 Jy ! Component: 100 - total flux cleaned = -0.000191878 Jy ! Component: 150 - total flux cleaned = -0.000198921 Jy ! Component: 200 - total flux cleaned = -0.000198826 Jy ! Total flux subtracted in 200 components = -0.000198826 Jy ! Clean residual min=-0.002532 max=0.002693 Jy/beam ! Clean residual mean=-0.000017 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.101171 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 54 components and 0.101171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067542Jy sigma=0.000887 ! Fit after self-cal, rms=0.067537Jy sigma=0.000887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.43374e-06 Jy ! Component: 100 - total flux cleaned = 6.39872e-06 Jy ! Component: 150 - total flux cleaned = 5.96673e-07 Jy ! Component: 200 - total flux cleaned = 5.83494e-06 Jy ! Total flux subtracted in 200 components = 5.83494e-06 Jy ! Clean residual min=-0.002539 max=0.002676 Jy/beam ! Clean residual mean=-0.000017 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.101177 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 55 components and 0.101177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067539Jy sigma=0.000887 ! Fit after self-cal, rms=0.067538Jy sigma=0.000887 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.571 mas, bmaj=8.646 mas, bpa=12.98 degrees ! Estimated noise=584.515 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.571 x 8.646 at 12.98 degrees (North through East) ! Clean map min=-0.0018909 max=0.099636 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=7.646 mas, bpa=12.93 degrees ! Estimated noise=975.259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.077649 Jy ! Component: 100 - total flux cleaned = 0.0947172 Jy ! Component: 150 - total flux cleaned = 0.0993233 Jy ! Component: 200 - total flux cleaned = 0.100303 Jy ! Total flux subtracted in 200 components = 0.100303 Jy ! Clean residual min=-0.002340 max=0.002926 Jy/beam ! Clean residual mean=-0.000007 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.100303 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.100303 Jy ! Inverting map and beam ! Estimated beam: bmin=3.571 mas, bmaj=8.646 mas, bpa=12.98 degrees ! Estimated noise=584.515 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000335362 Jy ! Component: 100 - total flux cleaned = -0.000166916 Jy ! Component: 150 - total flux cleaned = -7.31002e-05 Jy ! Component: 200 - total flux cleaned = 2.87263e-05 Jy ! Total flux subtracted in 200 components = 2.87263e-05 Jy ! Clean residual min=-0.002049 max=0.002287 Jy/beam ! Clean residual mean=-0.000010 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.100332 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 0.100332 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.412 mas, bmaj=10.83 mas, bpa=12.7 degrees ! Estimated noise=668.037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00055167 Jy ! Component: 100 - total flux cleaned = 0.000679731 Jy ! Component: 150 - total flux cleaned = 0.00073612 Jy ! Component: 200 - total flux cleaned = 0.000780859 Jy ! Total flux subtracted in 200 components = 0.000780859 Jy ! Clean residual min=-0.002504 max=0.002690 Jy/beam ! Clean residual mean=-0.000017 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.101113 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.73892e-05 Jy ! Component: 100 - total flux cleaned = 7.84572e-05 Jy ! Component: 150 - total flux cleaned = 9.223e-05 Jy ! Component: 200 - total flux cleaned = 9.23139e-05 Jy ! Total flux subtracted in 200 components = 9.23139e-05 Jy ! Clean residual min=-0.002511 max=0.002677 Jy/beam ! Clean residual mean=-0.000017 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.101205 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.101205 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.571 mas, bmaj=8.646 mas, bpa=12.98 degrees ! Estimated noise=584.515 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165246 Jy ! Component: 100 - total flux cleaned = -0.000165952 Jy ! Component: 150 - total flux cleaned = -0.00019268 Jy ! Component: 200 - total flux cleaned = -0.000216752 Jy ! Total flux subtracted in 200 components = -0.000216752 Jy ! Clean residual min=-0.002024 max=0.002275 Jy/beam ! Clean residual mean=-0.000009 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.100988 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.100988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067539Jy sigma=0.000887 ! Fit after self-cal, rms=0.067553Jy sigma=0.000887 wmodel J1827+2638_S_2014_01_04_pus_map.mod ! Writing 36 model components to file: J1827+2638_S_2014_01_04_pus_map.mod wobs J1827+2638_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1827+2638_S_2014_01_04_pus_uvs.fits wwins J1827+2638_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1827+2638_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00060752 Jy ! Component: 100 - total flux cleaned = 0.00053914 Jy ! Component: 150 - total flux cleaned = 0.000411021 Jy ! Component: 200 - total flux cleaned = 0.000262478 Jy ! Component: 250 - total flux cleaned = 0.000149336 Jy ! Component: 300 - total flux cleaned = -1.13621e-05 Jy ! Component: 350 - total flux cleaned = -0.000113255 Jy ! Component: 400 - total flux cleaned = -0.00023445 Jy ! Component: 450 - total flux cleaned = -0.000303482 Jy ! Component: 500 - total flux cleaned = -0.000325189 Jy ! Component: 550 - total flux cleaned = -0.000407988 Jy ! Component: 600 - total flux cleaned = -0.000487194 Jy ! Component: 650 - total flux cleaned = -0.000525185 Jy ! Component: 700 - total flux cleaned = -0.000599647 Jy ! Component: 750 - total flux cleaned = -0.000582084 Jy ! Component: 800 - total flux cleaned = -0.000582621 Jy ! Component: 850 - total flux cleaned = -0.000615688 Jy ! Component: 900 - total flux cleaned = -0.000648026 Jy ! Component: 950 - total flux cleaned = -0.000695557 Jy ! Component: 1000 - total flux cleaned = -0.000757259 Jy ! Component: 1050 - total flux cleaned = -0.000848075 Jy ! Component: 1100 - total flux cleaned = -0.000980649 Jy ! Component: 1150 - total flux cleaned = -0.00106706 Jy ! Component: 1200 - total flux cleaned = -0.0011798 Jy ! Component: 1250 - total flux cleaned = -0.00123518 Jy ! Component: 1300 - total flux cleaned = -0.00128954 Jy ! Component: 1350 - total flux cleaned = -0.00135603 Jy ! Component: 1400 - total flux cleaned = -0.00140832 Jy ! Component: 1450 - total flux cleaned = -0.00144655 Jy ! Component: 1500 - total flux cleaned = -0.00150898 Jy ! Component: 1550 - total flux cleaned = -0.00152111 Jy ! Component: 1600 - total flux cleaned = -0.001521 Jy ! Component: 1650 - total flux cleaned = -0.00156847 Jy ! Component: 1700 - total flux cleaned = -0.00155677 Jy ! Component: 1750 - total flux cleaned = -0.00156845 Jy ! Component: 1800 - total flux cleaned = -0.00161392 Jy ! Component: 1850 - total flux cleaned = -0.00162513 Jy ! Component: 1900 - total flux cleaned = -0.00164718 Jy ! Component: 1950 - total flux cleaned = -0.00166887 Jy ! Component: 2000 - total flux cleaned = -0.00166891 Jy ! Component: 2050 - total flux cleaned = -0.00170053 Jy ! Component: 2100 - total flux cleaned = -0.00166916 Jy ! Component: 2150 - total flux cleaned = -0.00167942 Jy ! Component: 2200 - total flux cleaned = -0.00165929 Jy ! Component: 2250 - total flux cleaned = -0.00166916 Jy ! Component: 2300 - total flux cleaned = -0.00168886 Jy ! Component: 2350 - total flux cleaned = -0.0017083 Jy ! Component: 2400 - total flux cleaned = -0.00173696 Jy ! Component: 2450 - total flux cleaned = -0.00173688 Jy ! Component: 2500 - total flux cleaned = -0.00175569 Jy ! Component: 2550 - total flux cleaned = -0.00177404 Jy ! Component: 2600 - total flux cleaned = -0.00174658 Jy ! Component: 2650 - total flux cleaned = -0.00175564 Jy ! Component: 2700 - total flux cleaned = -0.00178248 Jy ! Component: 2750 - total flux cleaned = -0.00179128 Jy ! Component: 2800 - total flux cleaned = -0.00180001 Jy ! Component: 2850 - total flux cleaned = -0.00182618 Jy ! Component: 2900 - total flux cleaned = -0.00184337 Jy ! Component: 2950 - total flux cleaned = -0.00188586 Jy ! Component: 3000 - total flux cleaned = -0.00191109 Jy ! Component: 3050 - total flux cleaned = -0.00195291 Jy ! Component: 3100 - total flux cleaned = -0.0019943 Jy ! Component: 3150 - total flux cleaned = -0.00201072 Jy ! Component: 3200 - total flux cleaned = -0.00201887 Jy ! Component: 3250 - total flux cleaned = -0.00202699 Jy ! Component: 3300 - total flux cleaned = -0.00205913 Jy ! Component: 3350 - total flux cleaned = -0.00208302 Jy ! Component: 3400 - total flux cleaned = -0.0020989 Jy ! Component: 3450 - total flux cleaned = -0.00213031 Jy ! Component: 3500 - total flux cleaned = -0.00216147 Jy ! Component: 3550 - total flux cleaned = -0.00217691 Jy ! Component: 3600 - total flux cleaned = -0.00221539 Jy ! Component: 3650 - total flux cleaned = -0.0022383 Jy ! Component: 3700 - total flux cleaned = -0.00225353 Jy ! Component: 3750 - total flux cleaned = -0.00229124 Jy ! Component: 3800 - total flux cleaned = -0.00230623 Jy ! Component: 3850 - total flux cleaned = -0.00231374 Jy ! Component: 3900 - total flux cleaned = -0.00233607 Jy ! Component: 3950 - total flux cleaned = -0.0023583 Jy ! Component: 4000 - total flux cleaned = -0.00237308 Jy ! Component: 4050 - total flux cleaned = -0.00239512 Jy ! Total flux subtracted in 4096 components = -0.00242441 Jy ! Clean residual min=-0.000526 max=0.000449 Jy/beam ! Clean residual mean=-0.000004 rms=0.000128 Jy/beam ! Combined flux in latest and established models = 0.0985637 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 343 components and 0.0985636 Jy ![Exited script file: muppet] wmap "J1827+2638_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.571 x 8.646 at 12.98 degrees (North through East) ! Clean map min=-0.0010713 max=0.099572 Jy/beam ! Writing clean map to FITS file: J1827+2638_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0995721 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000124594 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.375389 0.375389 0.750779 1.50156 3.00311 6.00623 12.0125 24.0249 48.0498 96.0997 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.099 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.571 x 8.646 at 12.98 degrees (North through East) ! Clean map min=-0.0010713 max=0.099572 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1827+2638_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:34:21 2017