! Started logfile: J1826-2924_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:33:19 2017 obs J1826-2924_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1826-2924_S_2015_01_23_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.853571 visibilities/baseline/integration-bin. ! Found source: J1826-2924 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 8604 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1826-2924_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.862691Jy sigma=0.007312 ! Fit after self-cal, rms=0.847995Jy sigma=0.007215 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.404 mas, bmaj=6.671 mas, bpa=-9.64 degrees ! Estimated noise=1314.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113972 Jy ! Component: 100 - total flux cleaned = 0.151297 Jy ! Total flux subtracted in 100 components = 0.151297 Jy ! Clean residual min=-0.010003 max=0.015772 Jy/beam ! Clean residual mean=0.000024 rms=0.002865 Jy/beam ! Combined flux in latest and established models = 0.151297 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.151297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122416Jy sigma=0.000955 ! Fit after self-cal, rms=0.122333Jy sigma=0.000954 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=7.826 mas, bpa=-9.14 degrees ! Estimated noise=907.617 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0273929 Jy ! Component: 100 - total flux cleaned = 0.0407485 Jy ! Component: 150 - total flux cleaned = 0.0485077 Jy ! Component: 200 - total flux cleaned = 0.0530492 Jy ! Total flux subtracted in 200 components = 0.0530492 Jy ! Clean residual min=-0.010655 max=0.017872 Jy/beam ! Clean residual mean=-0.000006 rms=0.003542 Jy/beam ! Combined flux in latest and established models = 0.204346 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 38 components and 0.204346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117278Jy sigma=0.000893 ! Fit after self-cal, rms=0.117273Jy sigma=0.000893 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 3.31 HN 1.10 KP 1.01 ! LA 0.90 MK 1.01 NL 1.23 OV 0.92 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 3.46 HN 1.16 KP 0.94 ! LA 0.89 MK 1.10 NL 1.29 OV 0.93 ! PT 0.94 SC 1.05 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 3.75 HN 1.07 KP 0.82 ! LA 0.71 MK 0.99 NL 1.18 OV 0.87 ! PT 0.90 SC 1.05 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 4.05 HN 1.10 KP 0.76 ! LA 0.76 MK 1.00 NL 0.98 OV 0.92 ! PT 0.95 SC 0.99 ! ! ! Fit before self-cal, rms=0.117273Jy sigma=0.000893 ! Fit after self-cal, rms=0.186712Jy sigma=0.000792 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.966 mas, bmaj=7.831 mas, bpa=-8.695 degrees ! Estimated noise=914.009 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000365279 Jy ! Component: 100 - total flux cleaned = 0.000401963 Jy ! Component: 150 - total flux cleaned = 0.000400829 Jy ! Component: 200 - total flux cleaned = 0.000402093 Jy ! Total flux subtracted in 200 components = 0.000402093 Jy ! Clean residual min=-0.003538 max=0.003249 Jy/beam ! Clean residual mean=0.000002 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.204748 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 43 components and 0.204748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186695Jy sigma=0.000792 ! Fit after self-cal, rms=0.187809Jy sigma=0.000790 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187809Jy sigma=0.000790 ! Fit after self-cal, rms=0.194657Jy sigma=0.000789 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=7.823 mas, bpa=-8.631 degrees ! Estimated noise=915.754 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0008962 Jy ! Component: 100 - total flux cleaned = 0.00089661 Jy ! Component: 150 - total flux cleaned = 0.000897336 Jy ! Component: 200 - total flux cleaned = 0.000872717 Jy ! Total flux subtracted in 200 components = 0.000872717 Jy ! Clean residual min=-0.003309 max=0.003013 Jy/beam ! Clean residual mean=0.000003 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.205621 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.205621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194642Jy sigma=0.000789 ! Fit after self-cal, rms=0.194668Jy sigma=0.000789 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.53775e-05 Jy ! Component: 100 - total flux cleaned = 1.22985e-05 Jy ! Component: 150 - total flux cleaned = 1.28743e-05 Jy ! Component: 200 - total flux cleaned = -6.83224e-06 Jy ! Total flux subtracted in 200 components = -6.83224e-06 Jy ! Clean residual min=-0.003310 max=0.002965 Jy/beam ! Clean residual mean=0.000003 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.205614 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.205614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194662Jy sigma=0.000789 ! Fit after self-cal, rms=0.194664Jy sigma=0.000789 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194664Jy sigma=0.000789 ! Fit after self-cal, rms=0.193339Jy sigma=0.000787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=7.824 mas, bpa=-8.65 degrees ! Estimated noise=913.241 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000391667 Jy ! Component: 100 - total flux cleaned = 0.000454782 Jy ! Component: 150 - total flux cleaned = 0.000491766 Jy ! Component: 200 - total flux cleaned = 0.000490948 Jy ! Total flux subtracted in 200 components = 0.000490948 Jy ! Clean residual min=-0.003122 max=0.003039 Jy/beam ! Clean residual mean=0.000003 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.206105 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 49 components and 0.206105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193330Jy sigma=0.000787 ! Fit after self-cal, rms=0.193324Jy sigma=0.000787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.94337e-05 Jy ! Component: 100 - total flux cleaned = 4.02735e-06 Jy ! Component: 150 - total flux cleaned = 4.49661e-06 Jy ! Component: 200 - total flux cleaned = 3.95072e-06 Jy ! Total flux subtracted in 200 components = 3.95072e-06 Jy ! Clean residual min=-0.003106 max=0.003047 Jy/beam ! Clean residual mean=0.000003 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.206109 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.206109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193320Jy sigma=0.000787 ! Fit after self-cal, rms=0.193322Jy sigma=0.000787 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193322Jy sigma=0.000787 ! Fit after self-cal, rms=0.193275Jy sigma=0.000787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.648 mas, bmaj=19.39 mas, bpa=-5.035 degrees ! Estimated noise=1186.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224356 Jy ! Component: 100 - total flux cleaned = 0.00022362 Jy ! Component: 150 - total flux cleaned = 0.00022345 Jy ! Component: 200 - total flux cleaned = 0.000233319 Jy ! Total flux subtracted in 200 components = 0.000233319 Jy ! Clean residual min=-0.002622 max=0.003338 Jy/beam ! Clean residual mean=0.000004 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.206342 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 53 components and 0.206342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193274Jy sigma=0.000787 ! Fit after self-cal, rms=0.193270Jy sigma=0.000787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.22976e-05 Jy ! Component: 100 - total flux cleaned = 3.21302e-05 Jy ! Component: 150 - total flux cleaned = 3.19025e-05 Jy ! Component: 200 - total flux cleaned = 2.50038e-05 Jy ! Total flux subtracted in 200 components = 2.50038e-05 Jy ! Clean residual min=-0.002606 max=0.003332 Jy/beam ! Clean residual mean=0.000004 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.206367 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.206367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193270Jy sigma=0.000787 ! Fit after self-cal, rms=0.193270Jy sigma=0.000787 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=7.819 mas, bpa=-8.697 degrees ! Estimated noise=912.989 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.951 x 7.819 at -8.697 degrees (North through East) ! Clean map min=-0.0030005 max=0.1549 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.41 mas, bmaj=6.62 mas, bpa=-8.855 degrees ! Estimated noise=1339.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115197 Jy ! Component: 100 - total flux cleaned = 0.153509 Jy ! Component: 150 - total flux cleaned = 0.171619 Jy ! Component: 200 - total flux cleaned = 0.182055 Jy ! Total flux subtracted in 200 components = 0.182055 Jy ! Clean residual min=-0.004820 max=0.005639 Jy/beam ! Clean residual mean=0.000009 rms=0.001250 Jy/beam ! Combined flux in latest and established models = 0.182055 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.182055 Jy ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=7.819 mas, bpa=-8.697 degrees ! Estimated noise=912.989 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011049 Jy ! Component: 100 - total flux cleaned = 0.0165571 Jy ! Component: 150 - total flux cleaned = 0.019619 Jy ! Component: 200 - total flux cleaned = 0.0213597 Jy ! Total flux subtracted in 200 components = 0.0213597 Jy ! Clean residual min=-0.003216 max=0.003283 Jy/beam ! Clean residual mean=0.000003 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.203415 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 51 components and 0.203415 Jy ! Inverting map ! Added new window around map position (-12, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305501 Jy ! Component: 100 - total flux cleaned = 0.00370759 Jy ! Component: 150 - total flux cleaned = 0.0041063 Jy ! Component: 200 - total flux cleaned = 0.00427805 Jy ! Total flux subtracted in 200 components = 0.00427805 Jy ! Clean residual min=-0.002799 max=0.002616 Jy/beam ! Clean residual mean=0.000003 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.207693 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 0.207693 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.648 mas, bmaj=19.39 mas, bpa=-5.035 degrees ! Estimated noise=1186.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000879512 Jy ! Component: 100 - total flux cleaned = 0.00109889 Jy ! Component: 150 - total flux cleaned = 0.00126738 Jy ! Component: 200 - total flux cleaned = 0.00135794 Jy ! Total flux subtracted in 200 components = 0.00135794 Jy ! Clean residual min=-0.002320 max=0.002634 Jy/beam ! Clean residual mean=0.000004 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.209051 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.84747e-05 Jy ! Component: 100 - total flux cleaned = 4.99621e-05 Jy ! Component: 150 - total flux cleaned = 4.96794e-05 Jy ! Component: 200 - total flux cleaned = 5.03834e-05 Jy ! Total flux subtracted in 200 components = 5.03834e-05 Jy ! Clean residual min=-0.002320 max=0.002632 Jy/beam ! Clean residual mean=0.000004 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.209101 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 86 components and 0.209101 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=7.819 mas, bpa=-8.697 degrees ! Estimated noise=912.989 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000610602 Jy ! Component: 100 - total flux cleaned = -0.000650284 Jy ! Component: 150 - total flux cleaned = -0.000684167 Jy ! Component: 200 - total flux cleaned = -0.000653868 Jy ! Total flux subtracted in 200 components = -0.000653868 Jy ! Clean residual min=-0.002697 max=0.002557 Jy/beam ! Clean residual mean=0.000003 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.208448 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 95 components and 0.208448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193222Jy sigma=0.000786 ! Fit after self-cal, rms=0.193182Jy sigma=0.000786 wmodel J1826-2924_S_2015_01_23_pus_map.mod ! Writing 95 model components to file: J1826-2924_S_2015_01_23_pus_map.mod wobs J1826-2924_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1826-2924_S_2015_01_23_pus_uvs.fits wwins J1826-2924_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J1826-2924_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000569776 Jy ! Component: 100 - total flux cleaned = -0.000798815 Jy ! Component: 150 - total flux cleaned = -0.00092511 Jy ! Component: 200 - total flux cleaned = -0.00108503 Jy ! Component: 250 - total flux cleaned = -0.0012009 Jy ! Component: 300 - total flux cleaned = -0.00127639 Jy ! Component: 350 - total flux cleaned = -0.00138649 Jy ! Component: 400 - total flux cleaned = -0.00149406 Jy ! Component: 450 - total flux cleaned = -0.00173812 Jy ! Component: 500 - total flux cleaned = -0.00184055 Jy ! Component: 550 - total flux cleaned = -0.00190812 Jy ! Component: 600 - total flux cleaned = -0.00197394 Jy ! Component: 650 - total flux cleaned = -0.00210321 Jy ! Component: 700 - total flux cleaned = -0.00219908 Jy ! Component: 750 - total flux cleaned = -0.00229288 Jy ! Component: 800 - total flux cleaned = -0.00238564 Jy ! Component: 850 - total flux cleaned = -0.00241585 Jy ! Component: 900 - total flux cleaned = -0.00241555 Jy ! Component: 950 - total flux cleaned = -0.00241581 Jy ! Component: 1000 - total flux cleaned = -0.00241572 Jy ! Component: 1050 - total flux cleaned = -0.00238665 Jy ! Component: 1100 - total flux cleaned = -0.00244415 Jy ! Component: 1150 - total flux cleaned = -0.00247208 Jy ! Component: 1200 - total flux cleaned = -0.00249962 Jy ! Component: 1250 - total flux cleaned = -0.00255465 Jy ! Component: 1300 - total flux cleaned = -0.00255469 Jy ! Component: 1350 - total flux cleaned = -0.00260898 Jy ! Component: 1400 - total flux cleaned = -0.00266328 Jy ! Component: 1450 - total flux cleaned = -0.00269008 Jy ! Component: 1500 - total flux cleaned = -0.0027694 Jy ! Component: 1550 - total flux cleaned = -0.00274306 Jy ! Component: 1600 - total flux cleaned = -0.0028214 Jy ! Component: 1650 - total flux cleaned = -0.00282156 Jy ! Component: 1700 - total flux cleaned = -0.00284723 Jy ! Component: 1750 - total flux cleaned = -0.00284728 Jy ! Component: 1800 - total flux cleaned = -0.00297361 Jy ! Component: 1850 - total flux cleaned = -0.00307375 Jy ! Component: 1900 - total flux cleaned = -0.00307379 Jy ! Component: 1950 - total flux cleaned = -0.00309833 Jy ! Component: 2000 - total flux cleaned = -0.00319602 Jy ! Component: 2050 - total flux cleaned = -0.00324472 Jy ! Component: 2100 - total flux cleaned = -0.00326901 Jy ! Component: 2150 - total flux cleaned = -0.00343614 Jy ! Component: 2200 - total flux cleaned = -0.00338864 Jy ! Component: 2250 - total flux cleaned = -0.00341212 Jy ! Component: 2300 - total flux cleaned = -0.00345885 Jy ! Component: 2350 - total flux cleaned = -0.00345865 Jy ! Component: 2400 - total flux cleaned = -0.00348153 Jy ! Component: 2450 - total flux cleaned = -0.00350436 Jy ! Component: 2500 - total flux cleaned = -0.00348175 Jy ! Component: 2550 - total flux cleaned = -0.00354927 Jy ! Component: 2600 - total flux cleaned = -0.00359403 Jy ! Component: 2650 - total flux cleaned = -0.00352721 Jy ! Component: 2700 - total flux cleaned = -0.00357119 Jy ! Component: 2750 - total flux cleaned = -0.00359328 Jy ! Component: 2800 - total flux cleaned = -0.00361516 Jy ! Component: 2850 - total flux cleaned = -0.00361543 Jy ! Component: 2900 - total flux cleaned = -0.00370157 Jy ! Component: 2950 - total flux cleaned = -0.00368022 Jy ! Component: 3000 - total flux cleaned = -0.00368029 Jy ! Component: 3050 - total flux cleaned = -0.00376483 Jy ! Component: 3100 - total flux cleaned = -0.00378581 Jy ! Component: 3150 - total flux cleaned = -0.00380677 Jy ! Component: 3200 - total flux cleaned = -0.00376523 Jy ! Component: 3250 - total flux cleaned = -0.00376502 Jy ! Component: 3300 - total flux cleaned = -0.0037856 Jy ! Component: 3350 - total flux cleaned = -0.00376547 Jy ! Component: 3400 - total flux cleaned = -0.00378585 Jy ! Component: 3450 - total flux cleaned = -0.00370503 Jy ! Component: 3500 - total flux cleaned = -0.00368491 Jy ! Component: 3550 - total flux cleaned = -0.00370479 Jy ! Component: 3600 - total flux cleaned = -0.0037245 Jy ! Component: 3650 - total flux cleaned = -0.00370468 Jy ! Component: 3700 - total flux cleaned = -0.00374388 Jy ! Component: 3750 - total flux cleaned = -0.00376345 Jy ! Component: 3800 - total flux cleaned = -0.00366621 Jy ! Component: 3850 - total flux cleaned = -0.00360835 Jy ! Component: 3900 - total flux cleaned = -0.00364679 Jy ! Component: 3950 - total flux cleaned = -0.00364663 Jy ! Component: 4000 - total flux cleaned = -0.0036276 Jy ! Component: 4050 - total flux cleaned = -0.00358981 Jy ! Total flux subtracted in 4096 components = -0.00353334 Jy ! Clean residual min=-0.001337 max=0.001067 Jy/beam ! Clean residual mean=0.000001 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.204914 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 376 components and 0.204914 Jy ![Exited script file: muppet] wmap "J1826-2924_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.951 x 7.819 at -8.697 degrees (North through East) ! Clean map min=-0.001874 max=0.15672 Jy/beam ! Writing clean map to FITS file: J1826-2924_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.156719 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000346125 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.662569 0.662569 1.32514 2.65028 5.30056 10.6011 21.2022 42.4044 84.8089 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.156 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.951 x 7.819 at -8.697 degrees (North through East) ! Clean map min=-0.001874 max=0.15672 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1826-2924_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:33:23 2017