! Started logfile: J1824+5651_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:34:11 2017 obs J1824+5651_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1824+5651_S_2014_01_04_pus_uva.fits ! AN table 1: 59 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.365819 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1824+5651 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 3108 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1824+5651_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 241 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.473542Jy sigma=0.007748 ! Fit after self-cal, rms=0.465004Jy sigma=0.007619 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.532 mas, bpa=7.016 degrees ! Estimated noise=1186 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.415604 Jy ! Component: 100 - total flux cleaned = 0.50982 Jy ! Total flux subtracted in 100 components = 0.50982 Jy ! Clean residual min=-0.027313 max=0.034444 Jy/beam ! Clean residual mean=0.000081 rms=0.006318 Jy/beam ! Combined flux in latest and established models = 0.50982 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.50982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149895Jy sigma=0.001836 ! Fit after self-cal, rms=0.149628Jy sigma=0.001834 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.666 mas, bmaj=8.267 mas, bpa=6.717 degrees ! Estimated noise=879.058 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0450488 Jy ! Component: 100 - total flux cleaned = 0.0680238 Jy ! Component: 150 - total flux cleaned = 0.0802623 Jy ! Component: 200 - total flux cleaned = 0.0877278 Jy ! Total flux subtracted in 200 components = 0.0877278 Jy ! Clean residual min=-0.016855 max=0.017742 Jy/beam ! Clean residual mean=0.000114 rms=0.004763 Jy/beam ! Combined flux in latest and established models = 0.597548 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 0.597548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130227Jy sigma=0.001679 ! Fit after self-cal, rms=0.129821Jy sigma=0.001675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 1.03 ! MK 0.99 NL 0.95 OV 0.99 PT 1.01 ! SC 0.93 ! ! ! Correcting IF 2. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 0.99 ! MK 1.01 NL 1.02 OV 1.04 PT 0.97 ! SC 0.96 ! ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* KP 1.00* LA 0.81 ! MK 1.02 NL 0.97 OV 0.96 PT 0.96 ! SC 0.96 ! ! ! Correcting IF 4. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* KP 1.00* LA 0.87 ! MK 1.01 NL 1.05 OV 1.03 PT 1.00 ! SC 0.91 ! ! ! Fit before self-cal, rms=0.129821Jy sigma=0.001675 ! Fit after self-cal, rms=0.093837Jy sigma=0.001372 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.587 mas, bmaj=8.059 mas, bpa=6.598 degrees ! Estimated noise=890.012 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0027158 Jy ! Component: 100 - total flux cleaned = -0.00399313 Jy ! Component: 150 - total flux cleaned = -0.00465211 Jy ! Component: 200 - total flux cleaned = -0.00510354 Jy ! Total flux subtracted in 200 components = -0.00510354 Jy ! Clean residual min=-0.009158 max=0.010307 Jy/beam ! Clean residual mean=-0.000012 rms=0.002609 Jy/beam ! Combined flux in latest and established models = 0.592444 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.592444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093127Jy sigma=0.001364 ! Fit after self-cal, rms=0.092762Jy sigma=0.001362 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092762Jy sigma=0.001362 ! Fit after self-cal, rms=0.093434Jy sigma=0.001334 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.581 mas, bmaj=8.085 mas, bpa=6.743 degrees ! Estimated noise=889.434 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000395913 Jy ! Component: 100 - total flux cleaned = -0.000580752 Jy ! Component: 150 - total flux cleaned = -0.000966805 Jy ! Component: 200 - total flux cleaned = -0.00102684 Jy ! Total flux subtracted in 200 components = -0.00102684 Jy ! Clean residual min=-0.005379 max=0.006470 Jy/beam ! Clean residual mean=-0.000028 rms=0.001583 Jy/beam ! Combined flux in latest and established models = 0.591417 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.591417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093167Jy sigma=0.001332 ! Fit after self-cal, rms=0.093107Jy sigma=0.001331 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.31749e-05 Jy ! Component: 100 - total flux cleaned = 6.30918e-06 Jy ! Component: 150 - total flux cleaned = -4.01861e-05 Jy ! Component: 200 - total flux cleaned = 5.06422e-06 Jy ! Total flux subtracted in 200 components = 5.06422e-06 Jy ! Clean residual min=-0.005113 max=0.006196 Jy/beam ! Clean residual mean=-0.000028 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 0.591422 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 37 components and 0.591422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092999Jy sigma=0.001330 ! Fit after self-cal, rms=0.092988Jy sigma=0.001330 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092988Jy sigma=0.001330 ! Fit after self-cal, rms=0.092974Jy sigma=0.001329 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.574 mas, bmaj=8.099 mas, bpa=6.741 degrees ! Estimated noise=888.572 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000851901 Jy ! Component: 100 - total flux cleaned = -0.000965559 Jy ! Component: 150 - total flux cleaned = -0.00102065 Jy ! Component: 200 - total flux cleaned = -0.00106647 Jy ! Total flux subtracted in 200 components = -0.00106647 Jy ! Clean residual min=-0.004648 max=0.005979 Jy/beam ! Clean residual mean=-0.000029 rms=0.001510 Jy/beam ! Combined flux in latest and established models = 0.590356 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.590356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092869Jy sigma=0.001329 ! Fit after self-cal, rms=0.092862Jy sigma=0.001329 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.41755e-06 Jy ! Component: 100 - total flux cleaned = 1.09765e-05 Jy ! Component: 150 - total flux cleaned = 1.07877e-05 Jy ! Component: 200 - total flux cleaned = 4.62065e-05 Jy ! Total flux subtracted in 200 components = 4.62065e-05 Jy ! Clean residual min=-0.004645 max=0.005816 Jy/beam ! Clean residual mean=-0.000029 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 0.590402 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.590402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092814Jy sigma=0.001328 ! Fit after self-cal, rms=0.092820Jy sigma=0.001328 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092820Jy sigma=0.001328 ! Fit after self-cal, rms=0.092793Jy sigma=0.001328 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.704 mas, bmaj=9.367 mas, bpa=-3.136 degrees ! Estimated noise=1011.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00039642 Jy ! Component: 100 - total flux cleaned = 0.000271343 Jy ! Component: 150 - total flux cleaned = 0.000206328 Jy ! Component: 200 - total flux cleaned = 0.0001865 Jy ! Total flux subtracted in 200 components = 0.0001865 Jy ! Clean residual min=-0.006415 max=0.007645 Jy/beam ! Clean residual mean=-0.000066 rms=0.002150 Jy/beam ! Combined flux in latest and established models = 0.590589 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 48 components and 0.590589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092793Jy sigma=0.001328 ! Fit after self-cal, rms=0.092796Jy sigma=0.001328 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.62862e-05 Jy ! Component: 100 - total flux cleaned = 4.10437e-05 Jy ! Component: 150 - total flux cleaned = 4.17991e-05 Jy ! Component: 200 - total flux cleaned = 5.9703e-05 Jy ! Total flux subtracted in 200 components = 5.9703e-05 Jy ! Clean residual min=-0.006445 max=0.007639 Jy/beam ! Clean residual mean=-0.000066 rms=0.002136 Jy/beam ! Combined flux in latest and established models = 0.590648 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 53 components and 0.590648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092791Jy sigma=0.001328 ! Fit after self-cal, rms=0.092802Jy sigma=0.001328 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.569 mas, bmaj=8.108 mas, bpa=6.742 degrees ! Estimated noise=887.881 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.569 x 8.108 at 6.742 degrees (North through East) ! Clean map min=-0.004649 max=0.52954 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092802Jy sigma=0.001328 ! Fit after self-cal, rms=0.163275Jy sigma=0.000796 ! Inverting map and beam ! Estimated beam: bmin=3.571 mas, bmaj=8.11 mas, bpa=6.75 degrees ! Estimated noise=888.506 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000816556 Jy ! Component: 100 - total flux cleaned = -0.000684484 Jy ! Component: 150 - total flux cleaned = -0.000613141 Jy ! Component: 200 - total flux cleaned = -0.000547273 Jy ! Total flux subtracted in 200 components = -0.000547273 Jy ! Clean residual min=-0.004539 max=0.005736 Jy/beam ! Clean residual mean=-0.000032 rms=0.001480 Jy/beam ! Combined flux in latest and established models = 0.590101 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 60 components and 0.590101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163228Jy sigma=0.000796 ! Fit after self-cal, rms=0.163240Jy sigma=0.000796 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.65854e-05 Jy ! Component: 100 - total flux cleaned = 4.7996e-05 Jy ! Component: 150 - total flux cleaned = 7.62143e-05 Jy ! Component: 200 - total flux cleaned = 0.000126198 Jy ! Total flux subtracted in 200 components = 0.000126198 Jy ! Clean residual min=-0.004560 max=0.005694 Jy/beam ! Clean residual mean=-0.000033 rms=0.001479 Jy/beam ! Combined flux in latest and established models = 0.590227 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.590227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163221Jy sigma=0.000795 ! Fit after self-cal, rms=0.163234Jy sigma=0.000795 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163234Jy sigma=0.000795 ! Fit after self-cal, rms=0.163606Jy sigma=0.000795 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=7.372 mas, bpa=7.207 degrees ! Estimated noise=1221.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.411944 Jy ! Component: 100 - total flux cleaned = 0.507441 Jy ! Component: 150 - total flux cleaned = 0.54534 Jy ! Component: 200 - total flux cleaned = 0.56342 Jy ! Total flux subtracted in 200 components = 0.56342 Jy ! Clean residual min=-0.007418 max=0.009171 Jy/beam ! Clean residual mean=0.000015 rms=0.002138 Jy/beam ! Combined flux in latest and established models = 0.56342 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.56342 Jy ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=8.115 mas, bpa=6.767 degrees ! Estimated noise=888.357 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118724 Jy ! Component: 100 - total flux cleaned = 0.018657 Jy ! Component: 150 - total flux cleaned = 0.0226021 Jy ! Component: 200 - total flux cleaned = 0.02352 Jy ! Total flux subtracted in 200 components = 0.02352 Jy ! Clean residual min=-0.004610 max=0.006337 Jy/beam ! Clean residual mean=-0.000026 rms=0.001452 Jy/beam ! Combined flux in latest and established models = 0.58694 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 46 components and 0.58694 Jy ! Inverting map ! Added new window around map position (-8, -26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586888 Jy ! Component: 100 - total flux cleaned = 0.00948909 Jy ! Component: 150 - total flux cleaned = 0.0115103 Jy ! Component: 200 - total flux cleaned = 0.0125542 Jy ! Total flux subtracted in 200 components = 0.0125542 Jy ! Clean residual min=-0.003663 max=0.004802 Jy/beam ! Clean residual mean=-0.000030 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.599494 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 70 components and 0.599494 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.705 mas, bmaj=9.369 mas, bpa=-3.06 degrees ! Estimated noise=1011.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235365 Jy ! Component: 100 - total flux cleaned = 0.00350196 Jy ! Component: 150 - total flux cleaned = 0.00434194 Jy ! Component: 200 - total flux cleaned = 0.00447013 Jy ! Total flux subtracted in 200 components = 0.00447013 Jy ! Clean residual min=-0.004725 max=0.005359 Jy/beam ! Clean residual mean=-0.000056 rms=0.001353 Jy/beam ! Combined flux in latest and established models = 0.603964 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.56371e-05 Jy ! Component: 100 - total flux cleaned = -5.42021e-05 Jy ! Component: 150 - total flux cleaned = -6.65709e-06 Jy ! Component: 200 - total flux cleaned = -4.9607e-05 Jy ! Total flux subtracted in 200 components = -4.9607e-05 Jy ! Clean residual min=-0.004846 max=0.005025 Jy/beam ! Clean residual mean=-0.000052 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.603914 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 94 components and 0.603914 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=8.115 mas, bpa=6.767 degrees ! Estimated noise=888.357 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.81987e-05 Jy ! Component: 100 - total flux cleaned = -0.000305743 Jy ! Component: 150 - total flux cleaned = -0.000462439 Jy ! Component: 200 - total flux cleaned = -0.0005087 Jy ! Total flux subtracted in 200 components = -0.0005087 Jy ! Clean residual min=-0.003953 max=0.004070 Jy/beam ! Clean residual mean=-0.000027 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.603406 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 111 components and 0.603406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163103Jy sigma=0.000779 ! Fit after self-cal, rms=0.162992Jy sigma=0.000777 wmodel J1824+5651_S_2014_01_04_pus_map.mod ! Writing 111 model components to file: J1824+5651_S_2014_01_04_pus_map.mod wobs J1824+5651_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1824+5651_S_2014_01_04_pus_uvs.fits wwins J1824+5651_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1824+5651_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411011 Jy ! Component: 100 - total flux cleaned = 0.000821247 Jy ! Component: 150 - total flux cleaned = 0.000985432 Jy ! Component: 200 - total flux cleaned = 0.000837132 Jy ! Component: 250 - total flux cleaned = 0.000553871 Jy ! Component: 300 - total flux cleaned = 0.000374406 Jy ! Component: 350 - total flux cleaned = 0.000119468 Jy ! Component: 400 - total flux cleaned = -0.000246802 Jy ! Component: 450 - total flux cleaned = -0.000404228 Jy ! Component: 500 - total flux cleaned = -0.000594022 Jy ! Component: 550 - total flux cleaned = -0.000775662 Jy ! Component: 600 - total flux cleaned = -0.000810413 Jy ! Component: 650 - total flux cleaned = -0.000879145 Jy ! Component: 700 - total flux cleaned = -0.000945032 Jy ! Component: 750 - total flux cleaned = -0.001009 Jy ! Component: 800 - total flux cleaned = -0.000884379 Jy ! Component: 850 - total flux cleaned = -0.000884328 Jy ! Component: 900 - total flux cleaned = -0.000793913 Jy ! Component: 950 - total flux cleaned = -0.000706282 Jy ! Component: 1000 - total flux cleaned = -0.000621759 Jy ! Component: 1050 - total flux cleaned = -0.000733691 Jy ! Component: 1100 - total flux cleaned = -0.000678468 Jy ! Component: 1150 - total flux cleaned = -0.000571384 Jy ! Component: 1200 - total flux cleaned = -0.000545409 Jy ! Component: 1250 - total flux cleaned = -0.000545156 Jy ! Component: 1300 - total flux cleaned = -0.000494483 Jy ! Component: 1350 - total flux cleaned = -0.000469544 Jy ! Component: 1400 - total flux cleaned = -0.00049373 Jy ! Component: 1450 - total flux cleaned = -0.000351138 Jy ! Component: 1500 - total flux cleaned = -0.000374904 Jy ! Component: 1550 - total flux cleaned = -0.000351989 Jy ! Component: 1600 - total flux cleaned = -0.000352471 Jy ! Component: 1650 - total flux cleaned = -0.000419296 Jy ! Component: 1700 - total flux cleaned = -0.000550356 Jy ! Component: 1750 - total flux cleaned = -0.00059325 Jy ! Component: 1800 - total flux cleaned = -0.000699024 Jy ! Component: 1850 - total flux cleaned = -0.000677651 Jy ! Component: 1900 - total flux cleaned = -0.000779853 Jy ! Component: 1950 - total flux cleaned = -0.000779704 Jy ! Component: 2000 - total flux cleaned = -0.000859452 Jy ! Component: 2050 - total flux cleaned = -0.000957863 Jy ! Component: 2100 - total flux cleaned = -0.00105455 Jy ! Component: 2150 - total flux cleaned = -0.00113091 Jy ! Component: 2200 - total flux cleaned = -0.00124429 Jy ! Component: 2250 - total flux cleaned = -0.00137493 Jy ! Component: 2300 - total flux cleaned = -0.0015221 Jy ! Component: 2350 - total flux cleaned = -0.00166751 Jy ! Component: 2400 - total flux cleaned = -0.00175745 Jy ! Component: 2450 - total flux cleaned = -0.00188217 Jy ! Component: 2500 - total flux cleaned = -0.00204091 Jy ! Component: 2550 - total flux cleaned = -0.00212792 Jy ! Component: 2600 - total flux cleaned = -0.00223154 Jy ! Component: 2650 - total flux cleaned = -0.00235132 Jy ! Component: 2700 - total flux cleaned = -0.00252072 Jy ! Component: 2750 - total flux cleaned = -0.00260468 Jy ! Component: 2800 - total flux cleaned = -0.00273777 Jy ! Component: 2850 - total flux cleaned = -0.002853 Jy ! Component: 2900 - total flux cleaned = -0.00291828 Jy ! Component: 2950 - total flux cleaned = -0.0029993 Jy ! Component: 3000 - total flux cleaned = -0.00312757 Jy ! Component: 3050 - total flux cleaned = -0.00317523 Jy ! Component: 3100 - total flux cleaned = -0.00325401 Jy ! Component: 3150 - total flux cleaned = -0.00336322 Jy ! Component: 3200 - total flux cleaned = -0.00342513 Jy ! Component: 3250 - total flux cleaned = -0.00351717 Jy ! Component: 3300 - total flux cleaned = -0.0035932 Jy ! Component: 3350 - total flux cleaned = -0.00366883 Jy ! Component: 3400 - total flux cleaned = -0.00378855 Jy ! Component: 3450 - total flux cleaned = -0.00390732 Jy ! Component: 3500 - total flux cleaned = -0.00401046 Jy ! Component: 3550 - total flux cleaned = -0.00408359 Jy ! Component: 3600 - total flux cleaned = -0.00418533 Jy ! Component: 3650 - total flux cleaned = -0.0042861 Jy ! Component: 3700 - total flux cleaned = -0.00437179 Jy ! Component: 3750 - total flux cleaned = -0.00442858 Jy ! Component: 3800 - total flux cleaned = -0.00451313 Jy ! Component: 3850 - total flux cleaned = -0.00458304 Jy ! Component: 3900 - total flux cleaned = -0.00462475 Jy ! Component: 3950 - total flux cleaned = -0.00470752 Jy ! Component: 4000 - total flux cleaned = -0.00480334 Jy ! Component: 4050 - total flux cleaned = -0.00489857 Jy ! Total flux subtracted in 4096 components = -0.00489844 Jy ! Clean residual min=-0.000867 max=0.000983 Jy/beam ! Clean residual mean=-0.000007 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.598507 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 381 components and 0.598507 Jy ![Exited script file: muppet] wmap "J1824+5651_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.567 x 8.115 at 6.767 degrees (North through East) ! Clean map min=-0.0020541 max=0.52963 Jy/beam ! Writing clean map to FITS file: J1824+5651_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.52963 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228341 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.12934 0.12934 0.25868 0.517359 1.03472 2.06944 4.13887 8.27775 16.5555 33.111 66.222 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.529 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.567 x 8.115 at 6.767 degrees (North through East) ! Clean map min=-0.0020541 max=0.52963 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1824+5651_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:34:16 2017