! Started logfile: J1824+0119_S_2015_01_22_pus_uvs.log on Tue Jan 3 23:02:29 2017 obs J1824+0119_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1824+0119_S_2015_01_22_pus_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1824+0119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 4320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1824+0119_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.842607Jy sigma=0.009417 ! Fit after self-cal, rms=0.833923Jy sigma=0.009322 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.672 mas, bmaj=6.282 mas, bpa=-2.325 degrees ! Estimated noise=1186.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124833 Jy ! Component: 100 - total flux cleaned = 0.156662 Jy ! Total flux subtracted in 100 components = 0.156662 Jy ! Clean residual min=-0.008672 max=0.013361 Jy/beam ! Clean residual mean=0.000016 rms=0.002426 Jy/beam ! Combined flux in latest and established models = 0.156662 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.156662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081948Jy sigma=0.000847 ! Fit after self-cal, rms=0.081948Jy sigma=0.000847 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=7.181 mas, bpa=-1.464 degrees ! Estimated noise=977.292 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189671 Jy ! Component: 100 - total flux cleaned = 0.0285035 Jy ! Component: 150 - total flux cleaned = 0.0339954 Jy ! Component: 200 - total flux cleaned = 0.0373453 Jy ! Total flux subtracted in 200 components = 0.0373453 Jy ! Clean residual min=-0.005520 max=0.005669 Jy/beam ! Clean residual mean=0.000003 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 0.194007 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 38 components and 0.194007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077051Jy sigma=0.000802 ! Fit after self-cal, rms=0.077051Jy sigma=0.000802 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.93 KP 1.11 ! LA 1.05 MK 1.08 NL 1.02 OV 0.98 ! PT 1.04 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.02 KP 1.00 ! LA 1.03 MK 1.02 NL 1.13 OV 0.98 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 1.00 KP 0.86 ! LA 0.83 MK 1.10 NL 1.15 OV 0.89 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 0.99 KP 0.79 ! LA 0.86 MK 0.99 NL 0.98 OV 1.00 ! PT 1.10 SC 1.00 ! ! ! Fit before self-cal, rms=0.077051Jy sigma=0.000802 ! Fit after self-cal, rms=0.072547Jy sigma=0.000771 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=7.256 mas, bpa=-1.373 degrees ! Estimated noise=977.631 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.13775e-05 Jy ! Component: 100 - total flux cleaned = 0.000158749 Jy ! Component: 150 - total flux cleaned = 0.000193272 Jy ! Component: 200 - total flux cleaned = 0.000240081 Jy ! Total flux subtracted in 200 components = 0.000240081 Jy ! Clean residual min=-0.002761 max=0.003005 Jy/beam ! Clean residual mean=-0.000001 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.194247 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 0.194247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072531Jy sigma=0.000771 ! Fit after self-cal, rms=0.072524Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072524Jy sigma=0.000771 ! Fit after self-cal, rms=0.072567Jy sigma=0.000771 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.162 mas, bmaj=7.261 mas, bpa=-1.428 degrees ! Estimated noise=977.901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115061 Jy ! Component: 100 - total flux cleaned = 0.000112651 Jy ! Component: 150 - total flux cleaned = 0.000147881 Jy ! Component: 200 - total flux cleaned = 0.000178806 Jy ! Total flux subtracted in 200 components = 0.000178806 Jy ! Clean residual min=-0.002715 max=0.002994 Jy/beam ! Clean residual mean=-0.000001 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.194426 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.194426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072560Jy sigma=0.000771 ! Fit after self-cal, rms=0.072561Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.32618e-05 Jy ! Component: 100 - total flux cleaned = 9.26789e-05 Jy ! Component: 150 - total flux cleaned = 9.26472e-05 Jy ! Component: 200 - total flux cleaned = 9.26687e-05 Jy ! Total flux subtracted in 200 components = 9.26687e-05 Jy ! Clean residual min=-0.002715 max=0.002993 Jy/beam ! Clean residual mean=-0.000001 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.194518 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.194518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072558Jy sigma=0.000771 ! Fit after self-cal, rms=0.072559Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072559Jy sigma=0.000771 ! Fit after self-cal, rms=0.072604Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.162 mas, bmaj=7.264 mas, bpa=-1.466 degrees ! Estimated noise=978.312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107713 Jy ! Component: 100 - total flux cleaned = 0.000107589 Jy ! Component: 150 - total flux cleaned = 0.000122473 Jy ! Component: 200 - total flux cleaned = 0.00012232 Jy ! Total flux subtracted in 200 components = 0.00012232 Jy ! Clean residual min=-0.002726 max=0.002995 Jy/beam ! Clean residual mean=-0.000001 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.194641 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.194641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072602Jy sigma=0.000771 ! Fit after self-cal, rms=0.072603Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.72419e-05 Jy ! Component: 100 - total flux cleaned = 1.73464e-05 Jy ! Component: 150 - total flux cleaned = 1.70429e-05 Jy ! Component: 200 - total flux cleaned = 1.71218e-05 Jy ! Total flux subtracted in 200 components = 1.71218e-05 Jy ! Clean residual min=-0.002733 max=0.002998 Jy/beam ! Clean residual mean=-0.000001 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.194658 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.194658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072601Jy sigma=0.000771 ! Fit after self-cal, rms=0.072601Jy sigma=0.000771 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072601Jy sigma=0.000771 ! Fit after self-cal, rms=0.072617Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.747 mas, bmaj=11.49 mas, bpa=-10.61 degrees ! Estimated noise=1276.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123329 Jy ! Component: 100 - total flux cleaned = 7.06542e-05 Jy ! Component: 150 - total flux cleaned = 9.86523e-05 Jy ! Component: 200 - total flux cleaned = 0.000111201 Jy ! Total flux subtracted in 200 components = 0.000111201 Jy ! Clean residual min=-0.003119 max=0.003973 Jy/beam ! Clean residual mean=-0.000002 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.194769 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 64 components and 0.194769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072619Jy sigma=0.000771 ! Fit after self-cal, rms=0.072620Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (96, -34.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021381 Jy ! Component: 100 - total flux cleaned = 0.00198223 Jy ! Component: 150 - total flux cleaned = 0.00182965 Jy ! Component: 200 - total flux cleaned = 0.0018713 Jy ! Total flux subtracted in 200 components = 0.0018713 Jy ! Clean residual min=-0.002706 max=0.001956 Jy/beam ! Clean residual mean=-0.000000 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.19664 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 95 components and 0.19664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072511Jy sigma=0.000769 ! Fit after self-cal, rms=0.072507Jy sigma=0.000769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=7.265 mas, bpa=-1.501 degrees ! Estimated noise=978.48 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.161 x 7.265 at -1.501 degrees (North through East) ! Clean map min=-0.0028538 max=0.16707 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.693 mas, bmaj=6.322 mas, bpa=-2.213 degrees ! Estimated noise=1194.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125575 Jy ! Component: 100 - total flux cleaned = 0.156886 Jy ! Component: 150 - total flux cleaned = 0.171246 Jy ! Component: 200 - total flux cleaned = 0.178997 Jy ! Total flux subtracted in 200 components = 0.178997 Jy ! Clean residual min=-0.004238 max=0.004719 Jy/beam ! Clean residual mean=0.000004 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.178997 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.178997 Jy ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=7.265 mas, bpa=-1.501 degrees ! Estimated noise=978.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00643887 Jy ! Component: 100 - total flux cleaned = 0.00995864 Jy ! Component: 150 - total flux cleaned = 0.010975 Jy ! Component: 200 - total flux cleaned = 0.0119094 Jy ! Total flux subtracted in 200 components = 0.0119094 Jy ! Clean residual min=-0.003012 max=0.002504 Jy/beam ! Clean residual mean=0.000001 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.190907 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 59 components and 0.190907 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.747 mas, bmaj=11.49 mas, bpa=-10.61 degrees ! Estimated noise=1276.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287784 Jy ! Component: 100 - total flux cleaned = 0.00374938 Jy ! Component: 150 - total flux cleaned = 0.00411009 Jy ! Component: 200 - total flux cleaned = 0.00444208 Jy ! Total flux subtracted in 200 components = 0.00444208 Jy ! Clean residual min=-0.002860 max=0.001944 Jy/beam ! Clean residual mean=0.000001 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.195349 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239586 Jy ! Component: 100 - total flux cleaned = 0.000410281 Jy ! Component: 150 - total flux cleaned = 0.000584533 Jy ! Component: 200 - total flux cleaned = 0.000686555 Jy ! Total flux subtracted in 200 components = 0.000686555 Jy ! Clean residual min=-0.002785 max=0.001991 Jy/beam ! Clean residual mean=0.000000 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.196035 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 110 components and 0.196035 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=7.265 mas, bpa=-1.501 degrees ! Estimated noise=978.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000262784 Jy ! Component: 100 - total flux cleaned = -0.000311948 Jy ! Component: 150 - total flux cleaned = -0.000121223 Jy ! Component: 200 - total flux cleaned = -8.20545e-05 Jy ! Total flux subtracted in 200 components = -8.20545e-05 Jy ! Clean residual min=-0.002985 max=0.002349 Jy/beam ! Clean residual mean=-0.000000 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.195953 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 134 components and 0.195953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072407Jy sigma=0.000768 ! Fit after self-cal, rms=0.072401Jy sigma=0.000768 wmodel J1824+0119_S_2015_01_22_pus_map.mod ! Writing 134 model components to file: J1824+0119_S_2015_01_22_pus_map.mod wobs J1824+0119_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1824+0119_S_2015_01_22_pus_uvs.fits wwins J1824+0119_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J1824+0119_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105078 Jy ! Component: 100 - total flux cleaned = -0.00159084 Jy ! Component: 150 - total flux cleaned = -0.00170653 Jy ! Component: 200 - total flux cleaned = -0.0017437 Jy ! Component: 250 - total flux cleaned = -0.00177757 Jy ! Component: 300 - total flux cleaned = -0.00168196 Jy ! Component: 350 - total flux cleaned = -0.00155933 Jy ! Component: 400 - total flux cleaned = -0.00149943 Jy ! Component: 450 - total flux cleaned = -0.00152608 Jy ! Component: 500 - total flux cleaned = -0.00149754 Jy ! Component: 550 - total flux cleaned = -0.001445 Jy ! Component: 600 - total flux cleaned = -0.00147134 Jy ! Component: 650 - total flux cleaned = -0.00149692 Jy ! Component: 700 - total flux cleaned = -0.00157056 Jy ! Component: 750 - total flux cleaned = -0.00164284 Jy ! Component: 800 - total flux cleaned = -0.00171307 Jy ! Component: 850 - total flux cleaned = -0.00178192 Jy ! Component: 900 - total flux cleaned = -0.00187088 Jy ! Component: 950 - total flux cleaned = -0.00191469 Jy ! Component: 1000 - total flux cleaned = -0.00195754 Jy ! Component: 1050 - total flux cleaned = -0.00208304 Jy ! Component: 1100 - total flux cleaned = -0.00214443 Jy ! Component: 1150 - total flux cleaned = -0.00216412 Jy ! Component: 1200 - total flux cleaned = -0.00220348 Jy ! Component: 1250 - total flux cleaned = -0.00218408 Jy ! Component: 1300 - total flux cleaned = -0.0021455 Jy ! Component: 1350 - total flux cleaned = -0.00216387 Jy ! Component: 1400 - total flux cleaned = -0.00207133 Jy ! Component: 1450 - total flux cleaned = -0.00207155 Jy ! Component: 1500 - total flux cleaned = -0.00212501 Jy ! Component: 1550 - total flux cleaned = -0.00212523 Jy ! Component: 1600 - total flux cleaned = -0.00212518 Jy ! Component: 1650 - total flux cleaned = -0.00215943 Jy ! Component: 1700 - total flux cleaned = -0.00217608 Jy ! Component: 1750 - total flux cleaned = -0.00215947 Jy ! Component: 1800 - total flux cleaned = -0.00219245 Jy ! Component: 1850 - total flux cleaned = -0.00225702 Jy ! Component: 1900 - total flux cleaned = -0.00233653 Jy ! Component: 1950 - total flux cleaned = -0.00238352 Jy ! Component: 2000 - total flux cleaned = -0.00247645 Jy ! Component: 2050 - total flux cleaned = -0.0025374 Jy ! Component: 2100 - total flux cleaned = -0.00258271 Jy ! Component: 2150 - total flux cleaned = -0.00264237 Jy ! Component: 2200 - total flux cleaned = -0.0027305 Jy ! Component: 2250 - total flux cleaned = -0.00275921 Jy ! Component: 2300 - total flux cleaned = -0.00284536 Jy ! Component: 2350 - total flux cleaned = -0.00285961 Jy ! Component: 2400 - total flux cleaned = -0.00295816 Jy ! Component: 2450 - total flux cleaned = -0.00302771 Jy ! Component: 2500 - total flux cleaned = -0.00308236 Jy ! Component: 2550 - total flux cleaned = -0.00312334 Jy ! Component: 2600 - total flux cleaned = -0.00320395 Jy ! Component: 2650 - total flux cleaned = -0.00325722 Jy ! Component: 2700 - total flux cleaned = -0.0032838 Jy ! Component: 2750 - total flux cleaned = -0.00338806 Jy ! Component: 2800 - total flux cleaned = -0.00350373 Jy ! Component: 2850 - total flux cleaned = -0.00356739 Jy ! Component: 2900 - total flux cleaned = -0.00363067 Jy ! Component: 2950 - total flux cleaned = -0.00371803 Jy ! Component: 3000 - total flux cleaned = -0.00377983 Jy ! Component: 3050 - total flux cleaned = -0.00388995 Jy ! Component: 3100 - total flux cleaned = -0.00393831 Jy ! Component: 3150 - total flux cleaned = -0.00396225 Jy ! Component: 3200 - total flux cleaned = -0.00400988 Jy ! Component: 3250 - total flux cleaned = -0.00408063 Jy ! Component: 3300 - total flux cleaned = -0.00416246 Jy ! Component: 3350 - total flux cleaned = -0.00415071 Jy ! Component: 3400 - total flux cleaned = -0.00425428 Jy ! Component: 3450 - total flux cleaned = -0.00423133 Jy ! Component: 3500 - total flux cleaned = -0.00428805 Jy ! Component: 3550 - total flux cleaned = -0.00433306 Jy ! Component: 3600 - total flux cleaned = -0.0043554 Jy ! Component: 3650 - total flux cleaned = -0.00439967 Jy ! Component: 3700 - total flux cleaned = -0.00443275 Jy ! Component: 3750 - total flux cleaned = -0.00448718 Jy ! Component: 3800 - total flux cleaned = -0.00450884 Jy ! Component: 3850 - total flux cleaned = -0.00455195 Jy ! Component: 3900 - total flux cleaned = -0.0045948 Jy ! Component: 3950 - total flux cleaned = -0.00460548 Jy ! Component: 4000 - total flux cleaned = -0.00464788 Jy ! Component: 4050 - total flux cleaned = -0.00470043 Jy ! Total flux subtracted in 4096 components = -0.00473185 Jy ! Clean residual min=-0.000555 max=0.000719 Jy/beam ! Clean residual mean=0.000000 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.191221 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 404 components and 0.191221 Jy ![Exited script file: muppet] wmap "J1824+0119_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.161 x 7.265 at -1.501 degrees (North through East) ! Clean map min=-0.0018142 max=0.16765 Jy/beam ! Writing clean map to FITS file: J1824+0119_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.16765 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000184615 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.330358 0.330358 0.660716 1.32143 2.64286 5.28572 10.5714 21.1429 42.2858 84.5716 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.167 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.161 x 7.265 at -1.501 degrees (North through East) ! Clean map min=-0.0018142 max=0.16765 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1824+0119_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 23:02:35 2017