! Started logfile: J1812-1310_S_2015_01_23_pus_uvs.log on Wed Jan 11 12:58:19 2017 obs J1812-1310_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1812-1310_S_2015_01_23_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.218248 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1812-1310 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 4832 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 2048 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1812-1310_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 2048x2048 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 681 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 621 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 621 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 621 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.998513Jy sigma=0.010796 ! Fit after self-cal, rms=0.950251Jy sigma=0.010286 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=11.35 mas, bmaj=22.36 mas, bpa=38.06 degrees ! Estimated noise=2058.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0395773 Jy ! Component: 100 - total flux cleaned = 0.0482417 Jy ! Total flux subtracted in 100 components = 0.0482417 Jy ! Clean residual min=-0.004590 max=0.006425 Jy/beam ! Clean residual mean=-0.000012 rms=0.001480 Jy/beam ! Combined flux in latest and established models = 0.0482417 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0482417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068700Jy sigma=0.000677 ! Fit after self-cal, rms=0.067686Jy sigma=0.000666 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=13.27 mas, bmaj=21.88 mas, bpa=36.79 degrees ! Estimated noise=982.026 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044324 Jy ! Component: 100 - total flux cleaned = 0.00690081 Jy ! Component: 150 - total flux cleaned = 0.00867421 Jy ! Component: 200 - total flux cleaned = 0.0100758 Jy ! Total flux subtracted in 200 components = 0.0100758 Jy ! Clean residual min=-0.003994 max=0.003415 Jy/beam ! Clean residual mean=-0.000018 rms=0.001215 Jy/beam ! Combined flux in latest and established models = 0.0583175 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 80 components and 0.0583175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067261Jy sigma=0.000664 ! Fit after self-cal, rms=0.067144Jy sigma=0.000663 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.00* KP 1.16 ! LA 0.98 MK 1.00* NL 1.00* OV 1.10 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* HN 1.00* KP 1.15 ! LA 0.93 MK 1.00* NL 1.00* OV 1.05 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.00* KP 0.94 ! LA 0.74 MK 1.00* NL 1.00* OV 1.04 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.00* KP 0.94 ! LA 0.79 MK 1.00* NL 1.00* OV 0.95 ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.067144Jy sigma=0.000663 ! Fit after self-cal, rms=0.061969Jy sigma=0.000657 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=13.18 mas, bmaj=22.01 mas, bpa=35.29 degrees ! Estimated noise=972.053 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161056 Jy ! Component: 100 - total flux cleaned = 0.00209559 Jy ! Component: 150 - total flux cleaned = 0.0025392 Jy ! Component: 200 - total flux cleaned = 0.00287646 Jy ! Total flux subtracted in 200 components = 0.00287646 Jy ! Clean residual min=-0.002935 max=0.002474 Jy/beam ! Clean residual mean=-0.000008 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.061194 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 96 components and 0.061194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061899Jy sigma=0.000656 ! Fit after self-cal, rms=0.061768Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061768Jy sigma=0.000655 ! Fit after self-cal, rms=0.061337Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.28 mas, bmaj=22.05 mas, bpa=34.52 degrees ! Estimated noise=966.028 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134412 Jy ! Component: 100 - total flux cleaned = 0.00169703 Jy ! Component: 150 - total flux cleaned = 0.00201443 Jy ! Component: 200 - total flux cleaned = 0.00222221 Jy ! Total flux subtracted in 200 components = 0.00222221 Jy ! Clean residual min=-0.002224 max=0.002103 Jy/beam ! Clean residual mean=-0.000005 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.0634162 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 111 components and 0.0634162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061295Jy sigma=0.000653 ! Fit after self-cal, rms=0.061346Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000451751 Jy ! Component: 100 - total flux cleaned = 0.000718395 Jy ! Component: 150 - total flux cleaned = 0.00100235 Jy ! Component: 200 - total flux cleaned = 0.00122008 Jy ! Total flux subtracted in 200 components = 0.00122008 Jy ! Clean residual min=-0.002201 max=0.002070 Jy/beam ! Clean residual mean=-0.000006 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.0646363 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 127 components and 0.0646362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061323Jy sigma=0.000653 ! Fit after self-cal, rms=0.061313Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061313Jy sigma=0.000652 ! Fit after self-cal, rms=0.061113Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.3 mas, bmaj=22.05 mas, bpa=34.09 degrees ! Estimated noise=959.291 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000693372 Jy ! Component: 100 - total flux cleaned = 0.000951238 Jy ! Component: 150 - total flux cleaned = 0.0011114 Jy ! Component: 200 - total flux cleaned = 0.00124527 Jy ! Total flux subtracted in 200 components = 0.00124527 Jy ! Clean residual min=-0.002069 max=0.001918 Jy/beam ! Clean residual mean=-0.000004 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0658815 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 135 components and 0.0658815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061091Jy sigma=0.000652 ! Fit after self-cal, rms=0.061107Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.09155e-05 Jy ! Component: 100 - total flux cleaned = 0.000170441 Jy ! Component: 150 - total flux cleaned = 0.000213842 Jy ! Component: 200 - total flux cleaned = 0.000307841 Jy ! Total flux subtracted in 200 components = 0.000307841 Jy ! Clean residual min=-0.002042 max=0.001867 Jy/beam ! Clean residual mean=-0.000004 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0661894 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 143 components and 0.0661894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061086Jy sigma=0.000652 ! Fit after self-cal, rms=0.061070Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061070Jy sigma=0.000651 ! Fit after self-cal, rms=0.061040Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=14.06 mas, bmaj=22.18 mas, bpa=32.55 degrees ! Estimated noise=958.345 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000453007 Jy ! Component: 100 - total flux cleaned = 0.000585896 Jy ! Component: 150 - total flux cleaned = 0.000651068 Jy ! Component: 200 - total flux cleaned = 0.000686996 Jy ! Total flux subtracted in 200 components = 0.000686996 Jy ! Clean residual min=-0.001978 max=0.001786 Jy/beam ! Clean residual mean=-0.000004 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.0668764 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 145 components and 0.0668764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061020Jy sigma=0.000651 ! Fit after self-cal, rms=0.061022Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.46455e-05 Jy ! Component: 100 - total flux cleaned = 0.000110336 Jy ! Component: 150 - total flux cleaned = 0.000168464 Jy ! Component: 200 - total flux cleaned = 0.000201322 Jy ! Total flux subtracted in 200 components = 0.000201322 Jy ! Clean residual min=-0.001886 max=0.001736 Jy/beam ! Clean residual mean=-0.000004 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.0670777 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 147 components and 0.0670777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061006Jy sigma=0.000651 ! Fit after self-cal, rms=0.060998Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=13.32 mas, bmaj=22.04 mas, bpa=33.79 degrees ! Estimated noise=957.203 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 13.32 x 22.04 at 33.79 degrees (North through East) ! Clean map min=-0.005225 max=0.052113 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.43 mas, bmaj=22.4 mas, bpa=35.97 degrees ! Estimated noise=1980.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0388554 Jy ! Component: 100 - total flux cleaned = 0.0485735 Jy ! Component: 150 - total flux cleaned = 0.0534766 Jy ! Component: 200 - total flux cleaned = 0.0559904 Jy ! Total flux subtracted in 200 components = 0.0559904 Jy ! Clean residual min=-0.004265 max=0.004275 Jy/beam ! Clean residual mean=-0.000005 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 0.0559904 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0559904 Jy ! Inverting map and beam ! Estimated beam: bmin=13.32 mas, bmaj=22.04 mas, bpa=33.79 degrees ! Estimated noise=957.203 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213736 Jy ! Component: 100 - total flux cleaned = 0.00338666 Jy ! Component: 150 - total flux cleaned = 0.00452132 Jy ! Component: 200 - total flux cleaned = 0.00549745 Jy ! Total flux subtracted in 200 components = 0.00549745 Jy ! Clean residual min=-0.002768 max=0.002441 Jy/beam ! Clean residual mean=-0.000007 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.0614878 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 61 components and 0.0614878 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=14.06 mas, bmaj=22.18 mas, bpa=32.55 degrees ! Estimated noise=958.345 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116294 Jy ! Component: 100 - total flux cleaned = 0.00191081 Jy ! Component: 150 - total flux cleaned = 0.00255748 Jy ! Component: 200 - total flux cleaned = 0.00311841 Jy ! Total flux subtracted in 200 components = 0.00311841 Jy ! Clean residual min=-0.002198 max=0.001889 Jy/beam ! Clean residual mean=-0.000006 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0646062 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000484774 Jy ! Component: 100 - total flux cleaned = 0.000844097 Jy ! Component: 150 - total flux cleaned = 0.00110246 Jy ! Component: 200 - total flux cleaned = 0.00128211 Jy ! Total flux subtracted in 200 components = 0.00128211 Jy ! Clean residual min=-0.002047 max=0.001689 Jy/beam ! Clean residual mean=-0.000005 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.0658883 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 83 components and 0.0658884 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=13.32 mas, bmaj=22.04 mas, bpa=33.79 degrees ! Estimated noise=957.203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.81279e-05 Jy ! Component: 100 - total flux cleaned = 0.000253082 Jy ! Component: 150 - total flux cleaned = 0.000402337 Jy ! Component: 200 - total flux cleaned = 0.000504796 Jy ! Total flux subtracted in 200 components = 0.000504796 Jy ! Clean residual min=-0.001912 max=0.001688 Jy/beam ! Clean residual mean=-0.000004 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.0663932 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 100 components and 0.0663932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060996Jy sigma=0.000651 ! Fit after self-cal, rms=0.060980Jy sigma=0.000651 wmodel J1812-1310_S_2015_01_23_pus_map.mod ! Writing 100 model components to file: J1812-1310_S_2015_01_23_pus_map.mod wobs J1812-1310_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1812-1310_S_2015_01_23_pus_uvs.fits wwins J1812-1310_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J1812-1310_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=8192 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000570442 Jy ! Component: 100 - total flux cleaned = -0.000750048 Jy ! Component: 150 - total flux cleaned = -0.000751216 Jy ! Component: 200 - total flux cleaned = -0.000848652 Jy ! Component: 250 - total flux cleaned = -0.000870459 Jy ! Component: 300 - total flux cleaned = -0.00087034 Jy ! Component: 350 - total flux cleaned = -0.000889854 Jy ! Component: 400 - total flux cleaned = -0.000854011 Jy ! Component: 450 - total flux cleaned = -0.000871315 Jy ! Component: 500 - total flux cleaned = -0.000870646 Jy ! Component: 550 - total flux cleaned = -0.000870428 Jy ! Component: 600 - total flux cleaned = -0.000899721 Jy ! Component: 650 - total flux cleaned = -0.000829403 Jy ! Component: 700 - total flux cleaned = -0.000761743 Jy ! Component: 750 - total flux cleaned = -0.000696651 Jy ! Component: 800 - total flux cleaned = -0.000646825 Jy ! Component: 850 - total flux cleaned = -0.000610241 Jy ! Component: 900 - total flux cleaned = -0.000586705 Jy ! Component: 950 - total flux cleaned = -0.00058664 Jy ! Component: 1000 - total flux cleaned = -0.000575634 Jy ! Component: 1050 - total flux cleaned = -0.000586463 Jy ! Component: 1100 - total flux cleaned = -0.000607474 Jy ! Component: 1150 - total flux cleaned = -0.000586873 Jy ! Component: 1200 - total flux cleaned = -0.000617141 Jy ! Component: 1250 - total flux cleaned = -0.00058732 Jy ! Component: 1300 - total flux cleaned = -0.000606931 Jy ! Component: 1350 - total flux cleaned = -0.000597418 Jy ! Component: 1400 - total flux cleaned = -0.000635184 Jy ! Component: 1450 - total flux cleaned = -0.000672427 Jy ! Component: 1500 - total flux cleaned = -0.000700014 Jy ! Component: 1550 - total flux cleaned = -0.000736458 Jy ! Component: 1600 - total flux cleaned = -0.000808122 Jy ! Component: 1650 - total flux cleaned = -0.000861162 Jy ! Component: 1700 - total flux cleaned = -0.000913497 Jy ! Component: 1750 - total flux cleaned = -0.000956563 Jy ! Component: 1800 - total flux cleaned = -0.000990734 Jy ! Component: 1850 - total flux cleaned = -0.00104974 Jy ! Component: 1900 - total flux cleaned = -0.00109978 Jy ! Component: 1950 - total flux cleaned = -0.00115754 Jy ! Component: 2000 - total flux cleaned = -0.00119843 Jy ! Component: 2050 - total flux cleaned = -0.00122275 Jy ! Component: 2100 - total flux cleaned = -0.00130328 Jy ! Component: 2150 - total flux cleaned = -0.00135127 Jy ! Component: 2200 - total flux cleaned = -0.00140686 Jy ! Component: 2250 - total flux cleaned = -0.00144635 Jy ! Component: 2300 - total flux cleaned = -0.00150135 Jy ! Component: 2350 - total flux cleaned = -0.00156388 Jy ! Component: 2400 - total flux cleaned = -0.00161831 Jy ! Component: 2450 - total flux cleaned = -0.00168016 Jy ! Component: 2500 - total flux cleaned = -0.00172632 Jy ! Component: 2550 - total flux cleaned = -0.00177237 Jy ! Component: 2600 - total flux cleaned = -0.00182579 Jy ! Component: 2650 - total flux cleaned = -0.00186386 Jy ! Component: 2700 - total flux cleaned = -0.00192446 Jy ! Component: 2750 - total flux cleaned = -0.00194714 Jy ! Component: 2800 - total flux cleaned = -0.0019848 Jy ! Component: 2850 - total flux cleaned = -0.00202244 Jy ! Component: 2900 - total flux cleaned = -0.00207495 Jy ! Component: 2950 - total flux cleaned = -0.00211234 Jy ! Component: 3000 - total flux cleaned = -0.00214226 Jy ! Component: 3050 - total flux cleaned = -0.00214977 Jy ! Component: 3100 - total flux cleaned = -0.00215726 Jy ! Component: 3150 - total flux cleaned = -0.00217224 Jy ! Component: 3200 - total flux cleaned = -0.00220223 Jy ! Component: 3250 - total flux cleaned = -0.00220975 Jy ! Component: 3300 - total flux cleaned = -0.00221728 Jy ! Component: 3350 - total flux cleaned = -0.00222483 Jy ! Component: 3400 - total flux cleaned = -0.00224 Jy ! Component: 3450 - total flux cleaned = -0.00226284 Jy ! Component: 3500 - total flux cleaned = -0.00228581 Jy ! Component: 3550 - total flux cleaned = -0.00230883 Jy ! Component: 3600 - total flux cleaned = -0.00233968 Jy ! Component: 3650 - total flux cleaned = -0.00238621 Jy ! Component: 3700 - total flux cleaned = -0.00240963 Jy ! Component: 3750 - total flux cleaned = -0.0024331 Jy ! Component: 3800 - total flux cleaned = -0.00248025 Jy ! Component: 3850 - total flux cleaned = -0.00251184 Jy ! Component: 3900 - total flux cleaned = -0.00255953 Jy ! Component: 3950 - total flux cleaned = -0.00260751 Jy ! Component: 4000 - total flux cleaned = -0.00266378 Jy ! Component: 4050 - total flux cleaned = -0.00269621 Jy ! Component: 4100 - total flux cleaned = -0.00272881 Jy ! Component: 4150 - total flux cleaned = -0.00275338 Jy ! Component: 4200 - total flux cleaned = -0.00279466 Jy ! Component: 4250 - total flux cleaned = -0.00281967 Jy ! Component: 4300 - total flux cleaned = -0.00283629 Jy ! Component: 4350 - total flux cleaned = -0.00287851 Jy ! Component: 4400 - total flux cleaned = -0.00288706 Jy ! Component: 4450 - total flux cleaned = -0.00292134 Jy ! Component: 4500 - total flux cleaned = -0.00294725 Jy ! Component: 4550 - total flux cleaned = -0.002982 Jy ! Component: 4600 - total flux cleaned = -0.00299948 Jy ! Component: 4650 - total flux cleaned = -0.00303472 Jy ! Component: 4700 - total flux cleaned = -0.00309701 Jy ! Component: 4750 - total flux cleaned = -0.00311485 Jy ! Component: 4800 - total flux cleaned = -0.00316001 Jy ! Component: 4850 - total flux cleaned = -0.00318735 Jy ! Component: 4900 - total flux cleaned = -0.00323333 Jy ! Component: 4950 - total flux cleaned = -0.0032704 Jy ! Component: 5000 - total flux cleaned = -0.00329841 Jy ! Component: 5050 - total flux cleaned = -0.00335484 Jy ! Component: 5100 - total flux cleaned = -0.00337383 Jy ! Component: 5150 - total flux cleaned = -0.00341212 Jy ! Component: 5200 - total flux cleaned = -0.00343123 Jy ! Component: 5250 - total flux cleaned = -0.00348956 Jy ! Component: 5300 - total flux cleaned = -0.00353873 Jy ! Component: 5350 - total flux cleaned = -0.00356852 Jy ! Component: 5400 - total flux cleaned = -0.00357836 Jy ! Component: 5450 - total flux cleaned = -0.00363893 Jy ! Component: 5500 - total flux cleaned = -0.00366948 Jy ! Component: 5550 - total flux cleaned = -0.00369007 Jy ! Component: 5600 - total flux cleaned = -0.00373152 Jy ! Component: 5650 - total flux cleaned = -0.00378377 Jy ! Component: 5700 - total flux cleaned = -0.00384715 Jy ! Component: 5750 - total flux cleaned = -0.00387914 Jy ! Component: 5800 - total flux cleaned = -0.00392211 Jy ! Component: 5850 - total flux cleaned = -0.00398743 Jy ! Component: 5900 - total flux cleaned = -0.0040425 Jy ! Component: 5950 - total flux cleaned = -0.00406468 Jy ! Component: 6000 - total flux cleaned = -0.00413172 Jy ! Component: 6050 - total flux cleaned = -0.00415433 Jy ! Component: 6100 - total flux cleaned = -0.00418848 Jy ! Component: 6150 - total flux cleaned = -0.0042344 Jy ! Component: 6200 - total flux cleaned = -0.00428069 Jy ! Component: 6250 - total flux cleaned = -0.0043509 Jy ! Component: 6300 - total flux cleaned = -0.00442209 Jy ! Component: 6350 - total flux cleaned = -0.00443423 Jy ! Component: 6400 - total flux cleaned = -0.00447031 Jy ! Component: 6450 - total flux cleaned = -0.00454344 Jy ! Component: 6500 - total flux cleaned = -0.00456805 Jy ! Component: 6550 - total flux cleaned = -0.00461776 Jy ! Component: 6600 - total flux cleaned = -0.00465546 Jy ! Component: 6650 - total flux cleaned = -0.00473143 Jy ! Component: 6700 - total flux cleaned = -0.00476986 Jy ! Component: 6750 - total flux cleaned = -0.00479578 Jy ! Component: 6800 - total flux cleaned = -0.00484797 Jy ! Component: 6850 - total flux cleaned = -0.00491381 Jy ! Component: 6900 - total flux cleaned = -0.00495383 Jy ! Component: 6950 - total flux cleaned = -0.00500768 Jy ! Component: 7000 - total flux cleaned = -0.00504851 Jy ! Component: 7050 - total flux cleaned = -0.00508981 Jy ! Component: 7100 - total flux cleaned = -0.00514523 Jy ! Component: 7150 - total flux cleaned = -0.00520125 Jy ! Component: 7200 - total flux cleaned = -0.00524373 Jy ! Component: 7250 - total flux cleaned = -0.00530092 Jy ! Component: 7300 - total flux cleaned = -0.00534415 Jy ! Component: 7350 - total flux cleaned = -0.00537312 Jy ! Component: 7400 - total flux cleaned = -0.00546131 Jy ! Component: 7450 - total flux cleaned = -0.00552093 Jy ! Component: 7500 - total flux cleaned = -0.0055962 Jy ! Component: 7550 - total flux cleaned = -0.00562675 Jy ! Component: 7600 - total flux cleaned = -0.00567262 Jy ! Component: 7650 - total flux cleaned = -0.00574998 Jy ! Component: 7700 - total flux cleaned = -0.00579683 Jy ! Component: 7750 - total flux cleaned = -0.00582842 Jy ! Component: 7800 - total flux cleaned = -0.00590826 Jy ! Component: 7850 - total flux cleaned = -0.00595661 Jy ! Component: 7900 - total flux cleaned = -0.00600559 Jy ! Component: 7950 - total flux cleaned = -0.00607133 Jy ! Component: 8000 - total flux cleaned = -0.00612125 Jy ! Component: 8050 - total flux cleaned = -0.00620537 Jy ! Component: 8100 - total flux cleaned = -0.0062396 Jy ! Component: 8150 - total flux cleaned = -0.00629114 Jy ! Total flux subtracted in 8192 components = -0.00637791 Jy ! Clean residual min=-0.000947 max=0.000932 Jy/beam ! Clean residual mean=-0.000003 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.0600153 Jy keep ! Adding 648 model components to the UV plane model. ! The established model now contains 748 components and 0.0600152 Jy ![Exited script file: muppet] wmap "J1812-1310_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 13.32 x 22.04 at 33.79 degrees (North through East) ! Clean map min=-0.0052588 max=0.051677 Jy/beam ! Writing clean map to FITS file: J1812-1310_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0516766 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000342937 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.99087 1.99087 3.98173 7.96347 15.9269 31.8539 63.7078 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.051 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 13.32 x 22.04 at 33.79 degrees (North through East) ! Clean map min=-0.0052588 max=0.051677 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1812-1310_S_2015_01_23_pus_uvs.log closed on Wed Jan 11 12:58:46 2017