! Started logfile: J1807+2204_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:33:59 2017 obs J1807+2204_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1807+2204_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.347222 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1807+2204 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 3800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1807+2204_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.882694Jy sigma=0.013761 ! Fit after self-cal, rms=0.869952Jy sigma=0.013568 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=6.771 mas, bpa=7.615 degrees ! Estimated noise=1242.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0985602 Jy ! Component: 100 - total flux cleaned = 0.120409 Jy ! Total flux subtracted in 100 components = 0.120409 Jy ! Clean residual min=-0.007899 max=0.008046 Jy/beam ! Clean residual mean=-0.000020 rms=0.002286 Jy/beam ! Combined flux in latest and established models = 0.120409 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.120409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069289Jy sigma=0.000940 ! Fit after self-cal, rms=0.069236Jy sigma=0.000940 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.444 mas, bmaj=7.843 mas, bpa=9.668 degrees ! Estimated noise=777.531 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00803968 Jy ! Component: 100 - total flux cleaned = 0.0110036 Jy ! Component: 150 - total flux cleaned = 0.0129147 Jy ! Component: 200 - total flux cleaned = 0.0140429 Jy ! Total flux subtracted in 200 components = 0.0140429 Jy ! Clean residual min=-0.003959 max=0.004270 Jy/beam ! Clean residual mean=-0.000017 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.134452 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 19 components and 0.134452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067949Jy sigma=0.000932 ! Fit after self-cal, rms=0.067895Jy sigma=0.000932 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* KP 1.00* LA 1.06 ! MK 0.99 NL 0.94 OV 1.02 PT 1.05 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* KP 1.00* LA 0.99 ! MK 0.98 NL 1.04 OV 1.02 PT 0.98 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* KP 1.00* LA 0.81 ! MK 1.05 NL 1.00 OV 0.93 PT 0.94 ! SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* KP 1.00* LA 0.86 ! MK 0.98 NL 1.06 OV 0.98 PT 1.02 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.067895Jy sigma=0.000932 ! Fit after self-cal, rms=0.064364Jy sigma=0.000909 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.443 mas, bmaj=7.915 mas, bpa=9.621 degrees ! Estimated noise=776.721 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00129377 Jy ! Component: 100 - total flux cleaned = -0.00156428 Jy ! Component: 150 - total flux cleaned = -0.00175976 Jy ! Component: 200 - total flux cleaned = -0.00196455 Jy ! Total flux subtracted in 200 components = -0.00196455 Jy ! Clean residual min=-0.002550 max=0.002338 Jy/beam ! Clean residual mean=-0.000006 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.132487 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.132487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064294Jy sigma=0.000908 ! Fit after self-cal, rms=0.064057Jy sigma=0.000908 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064057Jy sigma=0.000908 ! Fit after self-cal, rms=0.063914Jy sigma=0.000906 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=7.921 mas, bpa=9.513 degrees ! Estimated noise=776.261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000389371 Jy ! Component: 100 - total flux cleaned = -0.000626833 Jy ! Component: 150 - total flux cleaned = -0.000753063 Jy ! Component: 200 - total flux cleaned = -0.000869046 Jy ! Total flux subtracted in 200 components = -0.000869046 Jy ! Clean residual min=-0.002539 max=0.002213 Jy/beam ! Clean residual mean=-0.000006 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.131618 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.131618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063883Jy sigma=0.000906 ! Fit after self-cal, rms=0.063866Jy sigma=0.000906 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.88627e-05 Jy ! Component: 100 - total flux cleaned = -0.000176182 Jy ! Component: 150 - total flux cleaned = -0.000275213 Jy ! Component: 200 - total flux cleaned = -0.000331489 Jy ! Total flux subtracted in 200 components = -0.000331489 Jy ! Clean residual min=-0.002455 max=0.002200 Jy/beam ! Clean residual mean=-0.000007 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.131287 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.131287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063850Jy sigma=0.000906 ! Fit after self-cal, rms=0.063855Jy sigma=0.000906 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063855Jy sigma=0.000906 ! Fit after self-cal, rms=0.063803Jy sigma=0.000906 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=7.925 mas, bpa=9.441 degrees ! Estimated noise=776.572 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.7451e-05 Jy ! Component: 100 - total flux cleaned = -0.00018348 Jy ! Component: 150 - total flux cleaned = -0.000254033 Jy ! Component: 200 - total flux cleaned = -0.000287437 Jy ! Total flux subtracted in 200 components = -0.000287437 Jy ! Clean residual min=-0.002457 max=0.002119 Jy/beam ! Clean residual mean=-0.000006 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.130999 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.130999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063788Jy sigma=0.000906 ! Fit after self-cal, rms=0.063772Jy sigma=0.000906 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.14308e-05 Jy ! Component: 100 - total flux cleaned = -6.79614e-05 Jy ! Component: 150 - total flux cleaned = -9.76766e-05 Jy ! Component: 200 - total flux cleaned = -0.000139668 Jy ! Total flux subtracted in 200 components = -0.000139668 Jy ! Clean residual min=-0.002401 max=0.002100 Jy/beam ! Clean residual mean=-0.000007 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.13086 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.13086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063764Jy sigma=0.000906 ! Fit after self-cal, rms=0.063767Jy sigma=0.000906 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063767Jy sigma=0.000906 ! Fit after self-cal, rms=0.063747Jy sigma=0.000906 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.794 mas, bmaj=11.14 mas, bpa=14.57 degrees ! Estimated noise=900.847 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.59235e-05 Jy ! Component: 100 - total flux cleaned = 4.19217e-07 Jy ! Component: 150 - total flux cleaned = 1.4284e-05 Jy ! Component: 200 - total flux cleaned = 1.99792e-05 Jy ! Total flux subtracted in 200 components = 1.99792e-05 Jy ! Clean residual min=-0.002212 max=0.001933 Jy/beam ! Clean residual mean=-0.000012 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.13088 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.13088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063744Jy sigma=0.000906 ! Fit after self-cal, rms=0.063736Jy sigma=0.000906 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.82068e-05 Jy ! Component: 100 - total flux cleaned = 4.79945e-05 Jy ! Component: 150 - total flux cleaned = 4.32792e-05 Jy ! Component: 200 - total flux cleaned = 4.31192e-05 Jy ! Total flux subtracted in 200 components = 4.31192e-05 Jy ! Clean residual min=-0.002190 max=0.001905 Jy/beam ! Clean residual mean=-0.000012 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.130923 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.130923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063736Jy sigma=0.000906 ! Fit after self-cal, rms=0.063738Jy sigma=0.000906 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=7.926 mas, bpa=9.398 degrees ! Estimated noise=776.904 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.448 x 7.926 at 9.398 degrees (North through East) ! Clean map min=-0.0023118 max=0.12921 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.794 mas, bmaj=6.86 mas, bpa=7.466 degrees ! Estimated noise=1253.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0994743 Jy ! Component: 100 - total flux cleaned = 0.121695 Jy ! Component: 150 - total flux cleaned = 0.128388 Jy ! Component: 200 - total flux cleaned = 0.130447 Jy ! Total flux subtracted in 200 components = 0.130447 Jy ! Clean residual min=-0.004794 max=0.004060 Jy/beam ! Clean residual mean=-0.000004 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 0.130447 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.130447 Jy ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=7.926 mas, bpa=9.398 degrees ! Estimated noise=776.904 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00060563 Jy ! Component: 100 - total flux cleaned = 7.63801e-05 Jy ! Component: 150 - total flux cleaned = -0.000355835 Jy ! Component: 200 - total flux cleaned = -0.000710316 Jy ! Total flux subtracted in 200 components = -0.000710316 Jy ! Clean residual min=-0.002569 max=0.002245 Jy/beam ! Clean residual mean=-0.000009 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.129737 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.129737 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.794 mas, bmaj=11.14 mas, bpa=14.57 degrees ! Estimated noise=900.847 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018309 Jy ! Component: 100 - total flux cleaned = 0.000277987 Jy ! Component: 150 - total flux cleaned = 0.000297173 Jy ! Component: 200 - total flux cleaned = 0.000322491 Jy ! Total flux subtracted in 200 components = 0.000322491 Jy ! Clean residual min=-0.002211 max=0.001918 Jy/beam ! Clean residual mean=-0.000015 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.130059 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.29739e-05 Jy ! Component: 100 - total flux cleaned = 3.78467e-05 Jy ! Component: 150 - total flux cleaned = 6.01641e-05 Jy ! Component: 200 - total flux cleaned = 8.16461e-05 Jy ! Total flux subtracted in 200 components = 8.16461e-05 Jy ! Clean residual min=-0.002206 max=0.001915 Jy/beam ! Clean residual mean=-0.000015 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.130141 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.130141 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=7.926 mas, bpa=9.398 degrees ! Estimated noise=776.904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000358378 Jy ! Component: 100 - total flux cleaned = -0.000455505 Jy ! Component: 150 - total flux cleaned = -0.000570433 Jy ! Component: 200 - total flux cleaned = -0.000595666 Jy ! Total flux subtracted in 200 components = -0.000595666 Jy ! Clean residual min=-0.002396 max=0.002245 Jy/beam ! Clean residual mean=-0.000009 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.129545 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.129545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063769Jy sigma=0.000906 ! Fit after self-cal, rms=0.063776Jy sigma=0.000906 wmodel J1807+2204_S_2014_01_04_pus_map.mod ! Writing 41 model components to file: J1807+2204_S_2014_01_04_pus_map.mod wobs J1807+2204_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1807+2204_S_2014_01_04_pus_uvs.fits wwins J1807+2204_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1807+2204_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000240545 Jy ! Component: 100 - total flux cleaned = -0.000240683 Jy ! Component: 150 - total flux cleaned = -0.000467493 Jy ! Component: 200 - total flux cleaned = -0.00061762 Jy ! Component: 250 - total flux cleaned = -0.000759804 Jy ! Component: 300 - total flux cleaned = -0.000840092 Jy ! Component: 350 - total flux cleaned = -0.000990538 Jy ! Component: 400 - total flux cleaned = -0.00110999 Jy ! Component: 450 - total flux cleaned = -0.00117866 Jy ! Component: 500 - total flux cleaned = -0.00113459 Jy ! Component: 550 - total flux cleaned = -0.0010921 Jy ! Component: 600 - total flux cleaned = -0.000989524 Jy ! Component: 650 - total flux cleaned = -0.000910441 Jy ! Component: 700 - total flux cleaned = -0.00085337 Jy ! Component: 750 - total flux cleaned = -0.000779338 Jy ! Component: 800 - total flux cleaned = -0.000725977 Jy ! Component: 850 - total flux cleaned = -0.000691008 Jy ! Component: 900 - total flux cleaned = -0.000623315 Jy ! Component: 950 - total flux cleaned = -0.000557977 Jy ! Component: 1000 - total flux cleaned = -0.000558005 Jy ! Component: 1050 - total flux cleaned = -0.000526753 Jy ! Component: 1100 - total flux cleaned = -0.000496679 Jy ! Component: 1150 - total flux cleaned = -0.000481973 Jy ! Component: 1200 - total flux cleaned = -0.000467355 Jy ! Component: 1250 - total flux cleaned = -0.000467168 Jy ! Component: 1300 - total flux cleaned = -0.000425785 Jy ! Component: 1350 - total flux cleaned = -0.000412627 Jy ! Component: 1400 - total flux cleaned = -0.000412785 Jy ! Component: 1450 - total flux cleaned = -0.000386735 Jy ! Component: 1500 - total flux cleaned = -0.000348645 Jy ! Component: 1550 - total flux cleaned = -0.000349034 Jy ! Component: 1600 - total flux cleaned = -0.000336645 Jy ! Component: 1650 - total flux cleaned = -0.000324223 Jy ! Component: 1700 - total flux cleaned = -0.000300352 Jy ! Component: 1750 - total flux cleaned = -0.000311992 Jy ! Component: 1800 - total flux cleaned = -0.000289022 Jy ! Component: 1850 - total flux cleaned = -0.000311859 Jy ! Component: 1900 - total flux cleaned = -0.000334212 Jy ! Component: 1950 - total flux cleaned = -0.00033404 Jy ! Component: 2000 - total flux cleaned = -0.000344733 Jy ! Component: 2050 - total flux cleaned = -0.000312479 Jy ! Component: 2100 - total flux cleaned = -0.000312499 Jy ! Component: 2150 - total flux cleaned = -0.000281118 Jy ! Component: 2200 - total flux cleaned = -0.000250164 Jy ! Component: 2250 - total flux cleaned = -0.000199077 Jy ! Component: 2300 - total flux cleaned = -0.000178827 Jy ! Component: 2350 - total flux cleaned = -0.000168759 Jy ! Component: 2400 - total flux cleaned = -0.000129017 Jy ! Component: 2450 - total flux cleaned = -0.000129015 Jy ! Component: 2500 - total flux cleaned = -9.98016e-05 Jy ! Component: 2550 - total flux cleaned = -8.0446e-05 Jy ! Component: 2600 - total flux cleaned = -6.13869e-05 Jy ! Component: 2650 - total flux cleaned = -2.33286e-05 Jy ! Component: 2700 - total flux cleaned = -3.27123e-05 Jy ! Component: 2750 - total flux cleaned = -2.34306e-05 Jy ! Component: 2800 - total flux cleaned = 1.3744e-05 Jy ! Component: 2850 - total flux cleaned = 4.40999e-06 Jy ! Component: 2900 - total flux cleaned = 4.30748e-06 Jy ! Component: 2950 - total flux cleaned = 1.34198e-05 Jy ! Component: 3000 - total flux cleaned = 3.14428e-05 Jy ! Component: 3050 - total flux cleaned = 2.24372e-05 Jy ! Component: 3100 - total flux cleaned = 4.01521e-05 Jy ! Component: 3150 - total flux cleaned = 4.01154e-05 Jy ! Component: 3200 - total flux cleaned = 4.00648e-05 Jy ! Component: 3250 - total flux cleaned = 6.61719e-05 Jy ! Component: 3300 - total flux cleaned = 8.34756e-05 Jy ! Component: 3350 - total flux cleaned = 0.000117831 Jy ! Component: 3400 - total flux cleaned = 0.000100693 Jy ! Component: 3450 - total flux cleaned = 0.000117721 Jy ! Component: 3500 - total flux cleaned = 0.00015154 Jy ! Component: 3550 - total flux cleaned = 0.000168273 Jy ! Component: 3600 - total flux cleaned = 0.000193335 Jy ! Component: 3650 - total flux cleaned = 0.000226632 Jy ! Component: 3700 - total flux cleaned = 0.000267938 Jy ! Component: 3750 - total flux cleaned = 0.000292605 Jy ! Component: 3800 - total flux cleaned = 0.000317166 Jy ! Component: 3850 - total flux cleaned = 0.000398761 Jy ! Component: 3900 - total flux cleaned = 0.000423084 Jy ! Component: 3950 - total flux cleaned = 0.000463598 Jy ! Component: 4000 - total flux cleaned = 0.000512029 Jy ! Component: 4050 - total flux cleaned = 0.000536194 Jy ! Total flux subtracted in 4096 components = 0.000568308 Jy ! Clean residual min=-0.000475 max=0.000482 Jy/beam ! Clean residual mean=-0.000004 rms=0.000134 Jy/beam ! Combined flux in latest and established models = 0.130114 Jy keep ! Adding 224 model components to the UV plane model. ! The established model now contains 265 components and 0.130114 Jy ![Exited script file: muppet] wmap "J1807+2204_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.448 x 7.926 at 9.398 degrees (North through East) ! Clean map min=-0.0011196 max=0.12931 Jy/beam ! Writing clean map to FITS file: J1807+2204_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.129308 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000134825 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.3128 0.3128 0.6256 1.2512 2.5024 5.0048 10.0096 20.0192 40.0384 80.0768 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.129 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.448 x 7.926 at 9.398 degrees (North through East) ! Clean map min=-0.0011196 max=0.12931 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1807+2204_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:34:03 2017