! Started logfile: J1805-1408_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:32:14 2017 obs J1805-1408_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1805-1408_S_2015_01_23_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.328191 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1805-1408 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 7148 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1805-1408_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 490 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 490 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 547 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 547 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.954324Jy sigma=0.010198 ! Fit after self-cal, rms=0.924082Jy sigma=0.009886 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.669 mas, bmaj=20.38 mas, bpa=-6.954 degrees ! Estimated noise=1253.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0570187 Jy ! Component: 100 - total flux cleaned = 0.0806584 Jy ! Total flux subtracted in 100 components = 0.0806584 Jy ! Clean residual min=-0.009648 max=0.015166 Jy/beam ! Clean residual mean=-0.000035 rms=0.003711 Jy/beam ! Combined flux in latest and established models = 0.0806584 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0806584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084973Jy sigma=0.000848 ! Fit after self-cal, rms=0.084365Jy sigma=0.000843 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.424 mas, bmaj=23.06 mas, bpa=-8.261 degrees ! Estimated noise=828.572 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207205 Jy ! Component: 100 - total flux cleaned = 0.0336913 Jy ! Component: 150 - total flux cleaned = 0.0426213 Jy ! Component: 200 - total flux cleaned = 0.0488574 Jy ! Total flux subtracted in 200 components = 0.0488574 Jy ! Clean residual min=-0.007058 max=0.013380 Jy/beam ! Clean residual mean=-0.000032 rms=0.002916 Jy/beam ! Combined flux in latest and established models = 0.129516 Jy ! Performing phase self-cal ! Adding 87 model components to the UV plane model. ! The established model now contains 106 components and 0.129516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078095Jy sigma=0.000779 ! Fit after self-cal, rms=0.077577Jy sigma=0.000774 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 0.65 KP 0.96 ! LA 1.05 MK 1.00* NL 1.45 OV 1.25 ! PT 0.91 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00* HN 0.77 KP 0.92 ! LA 1.03 MK 1.00* NL 1.33 OV 1.15 ! PT 0.92 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.00* KP 0.76 ! LA 0.85 MK 1.00* NL 1.50 OV 1.10 ! PT 0.91 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* HN 1.00* KP 0.75 ! LA 0.89 MK 1.00* NL 1.11 OV 1.10 ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.077577Jy sigma=0.000774 ! Fit after self-cal, rms=0.079101Jy sigma=0.000751 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.584 mas, bmaj=23.13 mas, bpa=-7.647 degrees ! Estimated noise=843.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108236 Jy ! Component: 100 - total flux cleaned = 0.000942822 Jy ! Component: 150 - total flux cleaned = 0.000775876 Jy ! Component: 200 - total flux cleaned = 0.000645734 Jy ! Total flux subtracted in 200 components = 0.000645734 Jy ! Clean residual min=-0.004933 max=0.007106 Jy/beam ! Clean residual mean=0.000009 rms=0.001734 Jy/beam ! Combined flux in latest and established models = 0.130162 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 130 components and 0.130162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078998Jy sigma=0.000750 ! Fit after self-cal, rms=0.079349Jy sigma=0.000748 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079349Jy sigma=0.000748 ! Fit after self-cal, rms=0.082354Jy sigma=0.000743 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.371 mas, bmaj=23.25 mas, bpa=-7.719 degrees ! Estimated noise=836.935 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013295 Jy ! Component: 100 - total flux cleaned = 0.000234923 Jy ! Component: 150 - total flux cleaned = 0.000238324 Jy ! Component: 200 - total flux cleaned = 0.000205119 Jy ! Total flux subtracted in 200 components = 0.000205119 Jy ! Clean residual min=-0.003835 max=0.006645 Jy/beam ! Clean residual mean=-0.000004 rms=0.001438 Jy/beam ! Combined flux in latest and established models = 0.130367 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 143 components and 0.130367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082305Jy sigma=0.000743 ! Fit after self-cal, rms=0.082477Jy sigma=0.000743 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-77, 83). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00461448 Jy ! Component: 100 - total flux cleaned = 0.00552264 Jy ! Component: 150 - total flux cleaned = 0.00668689 Jy ! Component: 200 - total flux cleaned = 0.00753417 Jy ! Total flux subtracted in 200 components = 0.00753417 Jy ! Clean residual min=-0.003061 max=0.003691 Jy/beam ! Clean residual mean=0.000005 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.137901 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 188 components and 0.137901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082052Jy sigma=0.000738 ! Fit after self-cal, rms=0.082030Jy sigma=0.000736 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082030Jy sigma=0.000736 ! Fit after self-cal, rms=0.083197Jy sigma=0.000736 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.327 mas, bmaj=23.37 mas, bpa=-7.595 degrees ! Estimated noise=833.301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225044 Jy ! Component: 100 - total flux cleaned = 0.00289454 Jy ! Component: 150 - total flux cleaned = 0.00327777 Jy ! Component: 200 - total flux cleaned = 0.00395172 Jy ! Total flux subtracted in 200 components = 0.00395172 Jy ! Clean residual min=-0.002295 max=0.002913 Jy/beam ! Clean residual mean=0.000003 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.141853 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 229 components and 0.141853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083054Jy sigma=0.000735 ! Fit after self-cal, rms=0.083133Jy sigma=0.000734 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126706 Jy ! Component: 100 - total flux cleaned = 0.00131756 Jy ! Component: 150 - total flux cleaned = 0.00139452 Jy ! Component: 200 - total flux cleaned = 0.0016059 Jy ! Total flux subtracted in 200 components = 0.0016059 Jy ! Clean residual min=-0.002156 max=0.002486 Jy/beam ! Clean residual mean=0.000004 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.143458 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 253 components and 0.143458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083071Jy sigma=0.000734 ! Fit after self-cal, rms=0.083102Jy sigma=0.000734 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083102Jy sigma=0.000734 ! Fit after self-cal, rms=0.083021Jy sigma=0.000734 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.325 mas, bmaj=23.1 mas, bpa=-8.228 degrees ! Estimated noise=863.417 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106348 Jy ! Component: 100 - total flux cleaned = 0.00110407 Jy ! Component: 150 - total flux cleaned = 0.00127036 Jy ! Component: 200 - total flux cleaned = 0.00141868 Jy ! Total flux subtracted in 200 components = 0.00141868 Jy ! Clean residual min=-0.001789 max=0.002446 Jy/beam ! Clean residual mean=0.000002 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.144877 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 278 components and 0.144877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082977Jy sigma=0.000733 ! Fit after self-cal, rms=0.082985Jy sigma=0.000733 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411722 Jy ! Component: 100 - total flux cleaned = 0.000259024 Jy ! Component: 150 - total flux cleaned = 0.000286682 Jy ! Component: 200 - total flux cleaned = 0.000336862 Jy ! Total flux subtracted in 200 components = 0.000336862 Jy ! Clean residual min=-0.001818 max=0.002230 Jy/beam ! Clean residual mean=0.000003 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.145214 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 299 components and 0.145214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082959Jy sigma=0.000733 ! Fit after self-cal, rms=0.082967Jy sigma=0.000733 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=7.359 mas, bmaj=23.37 mas, bpa=-7.704 degrees ! Estimated noise=836.459 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.359 x 23.37 at -7.704 degrees (North through East) ! Clean map min=-0.0033899 max=0.074052 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.427 mas, bmaj=20.62 mas, bpa=-6.192 degrees ! Estimated noise=1268.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0572168 Jy ! Component: 100 - total flux cleaned = 0.0822616 Jy ! Component: 150 - total flux cleaned = 0.0965323 Jy ! Component: 200 - total flux cleaned = 0.106653 Jy ! Total flux subtracted in 200 components = 0.106653 Jy ! Clean residual min=-0.007665 max=0.007799 Jy/beam ! Clean residual mean=-0.000002 rms=0.002283 Jy/beam ! Combined flux in latest and established models = 0.106653 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 68 model components to the UV plane model. ! The established model now contains 68 components and 0.106653 Jy ! Inverting map and beam ! Estimated beam: bmin=7.359 mas, bmaj=23.37 mas, bpa=-7.704 degrees ! Estimated noise=836.459 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01063 Jy ! Component: 100 - total flux cleaned = 0.0168707 Jy ! Component: 150 - total flux cleaned = 0.0211664 Jy ! Component: 200 - total flux cleaned = 0.024305 Jy ! Total flux subtracted in 200 components = 0.024305 Jy ! Clean residual min=-0.003825 max=0.003528 Jy/beam ! Clean residual mean=-0.000000 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 0.130958 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 120 components and 0.130958 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.325 mas, bmaj=23.1 mas, bpa=-8.228 degrees ! Estimated noise=863.417 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00364641 Jy ! Component: 100 - total flux cleaned = 0.00587142 Jy ! Component: 150 - total flux cleaned = 0.00725462 Jy ! Component: 200 - total flux cleaned = 0.00830012 Jy ! Total flux subtracted in 200 components = 0.00830012 Jy ! Clean residual min=-0.002531 max=0.002957 Jy/beam ! Clean residual mean=0.000002 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.139259 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000732072 Jy ! Component: 100 - total flux cleaned = 0.00156041 Jy ! Component: 150 - total flux cleaned = 0.00223192 Jy ! Component: 200 - total flux cleaned = 0.00292031 Jy ! Total flux subtracted in 200 components = 0.00292031 Jy ! Clean residual min=-0.002100 max=0.002707 Jy/beam ! Clean residual mean=0.000001 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.142179 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 196 components and 0.142179 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=7.359 mas, bmaj=23.37 mas, bpa=-7.704 degrees ! Estimated noise=836.459 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00034426 Jy ! Component: 100 - total flux cleaned = 0.000704707 Jy ! Component: 150 - total flux cleaned = 0.00102829 Jy ! Component: 200 - total flux cleaned = 0.0013194 Jy ! Total flux subtracted in 200 components = 0.0013194 Jy ! Clean residual min=-0.002029 max=0.002403 Jy/beam ! Clean residual mean=0.000002 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.143498 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 222 components and 0.143498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082991Jy sigma=0.000733 ! Fit after self-cal, rms=0.082962Jy sigma=0.000733 wmodel J1805-1408_S_2015_01_23_pus_map.mod ! Writing 222 model components to file: J1805-1408_S_2015_01_23_pus_map.mod wobs J1805-1408_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1805-1408_S_2015_01_23_pus_uvs.fits wwins J1805-1408_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J1805-1408_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00080193 Jy ! Component: 100 - total flux cleaned = 0.00124719 Jy ! Component: 150 - total flux cleaned = 0.00162439 Jy ! Component: 200 - total flux cleaned = 0.00192395 Jy ! Component: 250 - total flux cleaned = 0.0021792 Jy ! Component: 300 - total flux cleaned = 0.00237494 Jy ! Component: 350 - total flux cleaned = 0.00251799 Jy ! Component: 400 - total flux cleaned = 0.002634 Jy ! Component: 450 - total flux cleaned = 0.00265294 Jy ! Component: 500 - total flux cleaned = 0.00272333 Jy ! Component: 550 - total flux cleaned = 0.0028079 Jy ! Component: 600 - total flux cleaned = 0.00290591 Jy ! Component: 650 - total flux cleaned = 0.0030008 Jy ! Component: 700 - total flux cleaned = 0.00309239 Jy ! Component: 750 - total flux cleaned = 0.00316683 Jy ! Component: 800 - total flux cleaned = 0.00325366 Jy ! Component: 850 - total flux cleaned = 0.00331045 Jy ! Component: 900 - total flux cleaned = 0.00340591 Jy ! Component: 950 - total flux cleaned = 0.00344555 Jy ! Component: 1000 - total flux cleaned = 0.00353601 Jy ! Component: 1050 - total flux cleaned = 0.00359879 Jy ! Component: 1100 - total flux cleaned = 0.00369704 Jy ! Component: 1150 - total flux cleaned = 0.00380506 Jy ! Component: 1200 - total flux cleaned = 0.00388746 Jy ! Component: 1250 - total flux cleaned = 0.00395695 Jy ! Component: 1300 - total flux cleaned = 0.00399102 Jy ! Component: 1350 - total flux cleaned = 0.00399094 Jy ! Component: 1400 - total flux cleaned = 0.00401287 Jy ! Component: 1450 - total flux cleaned = 0.00402358 Jy ! Component: 1500 - total flux cleaned = 0.00402347 Jy ! Component: 1550 - total flux cleaned = 0.00402323 Jy ! Component: 1600 - total flux cleaned = 0.0040438 Jy ! Component: 1650 - total flux cleaned = 0.00404362 Jy ! Component: 1700 - total flux cleaned = 0.00405371 Jy ! Component: 1750 - total flux cleaned = 0.00406376 Jy ! Component: 1800 - total flux cleaned = 0.00408354 Jy ! Component: 1850 - total flux cleaned = 0.00414206 Jy ! Component: 1900 - total flux cleaned = 0.00413241 Jy ! Component: 1950 - total flux cleaned = 0.00418941 Jy ! Component: 2000 - total flux cleaned = 0.00418925 Jy ! Component: 2050 - total flux cleaned = 0.00422657 Jy ! Component: 2100 - total flux cleaned = 0.00425433 Jy ! Component: 2150 - total flux cleaned = 0.00428175 Jy ! Component: 2200 - total flux cleaned = 0.00430887 Jy ! Component: 2250 - total flux cleaned = 0.00431782 Jy ! Component: 2300 - total flux cleaned = 0.00431782 Jy ! Component: 2350 - total flux cleaned = 0.00433552 Jy ! Component: 2400 - total flux cleaned = 0.00434435 Jy ! Component: 2450 - total flux cleaned = 0.0043794 Jy ! Component: 2500 - total flux cleaned = 0.00437937 Jy ! Component: 2550 - total flux cleaned = 0.00440532 Jy ! Component: 2600 - total flux cleaned = 0.00440531 Jy ! Component: 2650 - total flux cleaned = 0.00442253 Jy ! Component: 2700 - total flux cleaned = 0.0044397 Jy ! Component: 2750 - total flux cleaned = 0.00447393 Jy ! Component: 2800 - total flux cleaned = 0.00448246 Jy ! Component: 2850 - total flux cleaned = 0.00449946 Jy ! Component: 2900 - total flux cleaned = 0.00449945 Jy ! Component: 2950 - total flux cleaned = 0.00452483 Jy ! Component: 3000 - total flux cleaned = 0.00452485 Jy ! Component: 3050 - total flux cleaned = 0.00454173 Jy ! Component: 3100 - total flux cleaned = 0.00454174 Jy ! Component: 3150 - total flux cleaned = 0.00456703 Jy ! Component: 3200 - total flux cleaned = 0.0045839 Jy ! Component: 3250 - total flux cleaned = 0.00460072 Jy ! Component: 3300 - total flux cleaned = 0.0046007 Jy ! Component: 3350 - total flux cleaned = 0.00461751 Jy ! Component: 3400 - total flux cleaned = 0.00461751 Jy ! Component: 3450 - total flux cleaned = 0.00464278 Jy ! Component: 3500 - total flux cleaned = 0.00466799 Jy ! Component: 3550 - total flux cleaned = 0.0046764 Jy ! Component: 3600 - total flux cleaned = 0.00469329 Jy ! Component: 3650 - total flux cleaned = 0.00469328 Jy ! Component: 3700 - total flux cleaned = 0.00470173 Jy ! Component: 3750 - total flux cleaned = 0.0047102 Jy ! Component: 3800 - total flux cleaned = 0.0047272 Jy ! Component: 3850 - total flux cleaned = 0.00473566 Jy ! Component: 3900 - total flux cleaned = 0.00474421 Jy ! Component: 3950 - total flux cleaned = 0.00477841 Jy ! Component: 4000 - total flux cleaned = 0.00479555 Jy ! Component: 4050 - total flux cleaned = 0.00482139 Jy ! Total flux subtracted in 4096 components = 0.00487321 Jy ! Clean residual min=-0.000580 max=0.000530 Jy/beam ! Clean residual mean=0.000003 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.148371 Jy keep ! Adding 400 model components to the UV plane model. ! The established model now contains 622 components and 0.148372 Jy ![Exited script file: muppet] wmap "J1805-1408_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.359 x 23.37 at -7.704 degrees (North through East) ! Clean map min=-0.0026451 max=0.073482 Jy/beam ! Writing clean map to FITS file: J1805-1408_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0734822 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000151125 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.616984 0.616984 1.23397 2.46794 4.93587 9.87174 19.7435 39.487 78.9739 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.359 x 23.37 at -7.704 degrees (North through East) ! Clean map min=-0.0026451 max=0.073482 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1805-1408_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:32:20 2017