! Started logfile: J1755-2232_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:32:04 2017 obs J1755-2232_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1755-2232_S_2015_01_23_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.328455 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1755-2232 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 7272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1755-2232_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 498 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 498 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 498 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 498 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.942493Jy sigma=0.009318 ! Fit after self-cal, rms=0.903116Jy sigma=0.008940 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.151 mas, bmaj=21.72 mas, bpa=-4.748 degrees ! Estimated noise=1321.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0621119 Jy ! Component: 100 - total flux cleaned = 0.0910224 Jy ! Total flux subtracted in 100 components = 0.0910224 Jy ! Clean residual min=-0.012449 max=0.022827 Jy/beam ! Clean residual mean=0.000001 rms=0.005725 Jy/beam ! Combined flux in latest and established models = 0.0910224 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.0910224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118398Jy sigma=0.001062 ! Fit after self-cal, rms=0.117912Jy sigma=0.001058 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.043 mas, bmaj=23.88 mas, bpa=-5.093 degrees ! Estimated noise=855.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0445803 Jy ! Component: 100 - total flux cleaned = 0.07254 Jy ! Component: 150 - total flux cleaned = 0.0913852 Jy ! Component: 200 - total flux cleaned = 0.10507 Jy ! Total flux subtracted in 200 components = 0.10507 Jy ! Clean residual min=-0.010643 max=0.023405 Jy/beam ! Clean residual mean=-0.000016 rms=0.005731 Jy/beam ! Combined flux in latest and established models = 0.196092 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 113 components and 0.196092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095396Jy sigma=0.000848 ! Fit after self-cal, rms=0.093685Jy sigma=0.000831 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 1.00* KP 1.09 ! LA 0.92 MK 1.00* NL 2.04 OV 1.21 ! PT 0.87 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.00* HN 1.00* KP 0.97 ! LA 0.91 MK 1.00* NL 1.71 OV 1.16 ! PT 0.88 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.00* KP 0.83 ! LA 0.73 MK 1.00* NL 1.77 OV 1.06 ! PT 0.85 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.00* KP 0.75 ! LA 0.77 MK 1.00* NL 1.30 OV 1.13 ! PT 0.90 SC 1.00* ! ! ! Fit before self-cal, rms=0.093685Jy sigma=0.000831 ! Fit after self-cal, rms=0.097831Jy sigma=0.000771 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.405 mas, bmaj=23.59 mas, bpa=-3.116 degrees ! Estimated noise=906.185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00338922 Jy ! Component: 100 - total flux cleaned = 0.00381982 Jy ! Component: 150 - total flux cleaned = 0.00366151 Jy ! Component: 200 - total flux cleaned = 0.00379259 Jy ! Total flux subtracted in 200 components = 0.00379259 Jy ! Clean residual min=-0.008264 max=0.009459 Jy/beam ! Clean residual mean=0.000020 rms=0.003131 Jy/beam ! Combined flux in latest and established models = 0.199885 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 144 components and 0.199885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097138Jy sigma=0.000764 ! Fit after self-cal, rms=0.096991Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096991Jy sigma=0.000762 ! Fit after self-cal, rms=0.098072Jy sigma=0.000760 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.501 mas, bmaj=23.32 mas, bpa=-2.491 degrees ! Estimated noise=907.563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204058 Jy ! Component: 100 - total flux cleaned = 0.00260809 Jy ! Component: 150 - total flux cleaned = 0.00311161 Jy ! Component: 200 - total flux cleaned = 0.00357204 Jy ! Total flux subtracted in 200 components = 0.00357204 Jy ! Clean residual min=-0.007304 max=0.008470 Jy/beam ! Clean residual mean=0.000021 rms=0.002830 Jy/beam ! Combined flux in latest and established models = 0.203457 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 155 components and 0.203457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097735Jy sigma=0.000756 ! Fit after self-cal, rms=0.097596Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000692431 Jy ! Component: 100 - total flux cleaned = 0.00131069 Jy ! Component: 150 - total flux cleaned = 0.00186914 Jy ! Component: 200 - total flux cleaned = 0.00227786 Jy ! Total flux subtracted in 200 components = 0.00227786 Jy ! Clean residual min=-0.006977 max=0.008255 Jy/beam ! Clean residual mean=0.000020 rms=0.002690 Jy/beam ! Combined flux in latest and established models = 0.205735 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 172 components and 0.205735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097346Jy sigma=0.000753 ! Fit after self-cal, rms=0.097208Jy sigma=0.000753 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097208Jy sigma=0.000753 ! Fit after self-cal, rms=0.095477Jy sigma=0.000749 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.461 mas, bmaj=22.89 mas, bpa=-1.692 degrees ! Estimated noise=883.468 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000859115 Jy ! Component: 100 - total flux cleaned = 0.00149225 Jy ! Component: 150 - total flux cleaned = 0.00196452 Jy ! Component: 200 - total flux cleaned = 0.00239322 Jy ! Total flux subtracted in 200 components = 0.00239322 Jy ! Clean residual min=-0.005873 max=0.007484 Jy/beam ! Clean residual mean=0.000021 rms=0.002305 Jy/beam ! Combined flux in latest and established models = 0.208128 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 184 components and 0.208128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095277Jy sigma=0.000747 ! Fit after self-cal, rms=0.095152Jy sigma=0.000747 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000545231 Jy ! Component: 100 - total flux cleaned = 0.00113766 Jy ! Component: 150 - total flux cleaned = 0.00158392 Jy ! Component: 200 - total flux cleaned = 0.00206602 Jy ! Total flux subtracted in 200 components = 0.00206602 Jy ! Clean residual min=-0.005709 max=0.007268 Jy/beam ! Clean residual mean=0.000020 rms=0.002186 Jy/beam ! Combined flux in latest and established models = 0.210194 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 193 components and 0.210194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094989Jy sigma=0.000745 ! Fit after self-cal, rms=0.094880Jy sigma=0.000745 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094880Jy sigma=0.000745 ! Fit after self-cal, rms=0.093972Jy sigma=0.000744 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.07 mas, bmaj=23.16 mas, bpa=1.076 degrees ! Estimated noise=854.973 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101293 Jy ! Component: 100 - total flux cleaned = 0.00155968 Jy ! Component: 150 - total flux cleaned = 0.00197912 Jy ! Component: 200 - total flux cleaned = 0.00236611 Jy ! Total flux subtracted in 200 components = 0.00236611 Jy ! Clean residual min=-0.005806 max=0.007879 Jy/beam ! Clean residual mean=0.000018 rms=0.002253 Jy/beam ! Combined flux in latest and established models = 0.21256 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 210 components and 0.21256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093845Jy sigma=0.000743 ! Fit after self-cal, rms=0.093695Jy sigma=0.000742 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000560841 Jy ! Component: 100 - total flux cleaned = 0.00105623 Jy ! Component: 150 - total flux cleaned = 0.00143202 Jy ! Component: 200 - total flux cleaned = 0.00177897 Jy ! Total flux subtracted in 200 components = 0.00177897 Jy ! Clean residual min=-0.005591 max=0.007674 Jy/beam ! Clean residual mean=0.000019 rms=0.002140 Jy/beam ! Combined flux in latest and established models = 0.214339 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 219 components and 0.214339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093600Jy sigma=0.000741 ! Fit after self-cal, rms=0.093492Jy sigma=0.000741 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=9.475 mas, bmaj=22.85 mas, bpa=-1.474 degrees ! Estimated noise=875.956 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.475 x 22.85 at -1.474 degrees (North through East) ! Clean map min=-0.005196 max=0.095201 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.204 mas, bmaj=20.19 mas, bpa=-0.9764 degrees ! Estimated noise=1393.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0641741 Jy ! Component: 100 - total flux cleaned = 0.100531 Jy ! Component: 150 - total flux cleaned = 0.123119 Jy ! Component: 200 - total flux cleaned = 0.138642 Jy ! Total flux subtracted in 200 components = 0.138642 Jy ! Clean residual min=-0.011063 max=0.011080 Jy/beam ! Clean residual mean=0.000014 rms=0.003393 Jy/beam ! Combined flux in latest and established models = 0.138642 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 61 model components to the UV plane model. ! The established model now contains 61 components and 0.138642 Jy ! Inverting map and beam ! Estimated beam: bmin=9.475 mas, bmaj=22.85 mas, bpa=-1.474 degrees ! Estimated noise=875.956 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224518 Jy ! Component: 100 - total flux cleaned = 0.0366597 Jy ! Component: 150 - total flux cleaned = 0.0465804 Jy ! Component: 200 - total flux cleaned = 0.0535658 Jy ! Total flux subtracted in 200 components = 0.0535658 Jy ! Clean residual min=-0.008317 max=0.010761 Jy/beam ! Clean residual mean=0.000008 rms=0.002932 Jy/beam ! Combined flux in latest and established models = 0.192207 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 107 components and 0.192207 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.07 mas, bmaj=23.16 mas, bpa=1.076 degrees ! Estimated noise=854.973 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00660086 Jy ! Component: 100 - total flux cleaned = 0.011036 Jy ! Component: 150 - total flux cleaned = 0.0141293 Jy ! Component: 200 - total flux cleaned = 0.0158406 Jy ! Total flux subtracted in 200 components = 0.0158406 Jy ! Clean residual min=-0.006905 max=0.008134 Jy/beam ! Clean residual mean=0.000022 rms=0.002489 Jy/beam ! Combined flux in latest and established models = 0.208048 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000724214 Jy ! Component: 100 - total flux cleaned = 0.00134553 Jy ! Component: 150 - total flux cleaned = 0.00177962 Jy ! Component: 200 - total flux cleaned = 0.00197701 Jy ! Total flux subtracted in 200 components = 0.00197701 Jy ! Clean residual min=-0.006632 max=0.007894 Jy/beam ! Clean residual mean=0.000022 rms=0.002392 Jy/beam ! Combined flux in latest and established models = 0.210025 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 133 components and 0.210025 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=9.475 mas, bmaj=22.85 mas, bpa=-1.474 degrees ! Estimated noise=875.956 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104448 Jy ! Component: 100 - total flux cleaned = -0.00153836 Jy ! Component: 150 - total flux cleaned = -0.00196837 Jy ! Component: 200 - total flux cleaned = -0.00234661 Jy ! Total flux subtracted in 200 components = -0.00234661 Jy ! Clean residual min=-0.007200 max=0.009219 Jy/beam ! Clean residual mean=0.000022 rms=0.002339 Jy/beam ! Combined flux in latest and established models = 0.207678 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 164 components and 0.207678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094435Jy sigma=0.000748 ! Fit after self-cal, rms=0.094156Jy sigma=0.000747 wmodel J1755-2232_S_2015_01_23_pus_map.mod ! Writing 164 model components to file: J1755-2232_S_2015_01_23_pus_map.mod wobs J1755-2232_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1755-2232_S_2015_01_23_pus_uvs.fits wwins J1755-2232_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J1755-2232_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376219 Jy ! Component: 100 - total flux cleaned = 0.00683817 Jy ! Component: 150 - total flux cleaned = 0.00910322 Jy ! Component: 200 - total flux cleaned = 0.0109207 Jy ! Component: 250 - total flux cleaned = 0.012728 Jy ! Component: 300 - total flux cleaned = 0.0143758 Jy ! Component: 350 - total flux cleaned = 0.0157444 Jy ! Component: 400 - total flux cleaned = 0.0169422 Jy ! Component: 450 - total flux cleaned = 0.0178683 Jy ! Component: 500 - total flux cleaned = 0.0182711 Jy ! Component: 550 - total flux cleaned = 0.0187563 Jy ! Component: 600 - total flux cleaned = 0.0192091 Jy ! Component: 650 - total flux cleaned = 0.0195425 Jy ! Component: 700 - total flux cleaned = 0.0197653 Jy ! Component: 750 - total flux cleaned = 0.0198918 Jy ! Component: 800 - total flux cleaned = 0.0200497 Jy ! Component: 850 - total flux cleaned = 0.0202395 Jy ! Component: 900 - total flux cleaned = 0.0203469 Jy ! Component: 950 - total flux cleaned = 0.0203816 Jy ! Component: 1000 - total flux cleaned = 0.0204156 Jy ! Component: 1050 - total flux cleaned = 0.0206029 Jy ! Component: 1100 - total flux cleaned = 0.0205728 Jy ! Component: 1150 - total flux cleaned = 0.0204869 Jy ! Component: 1200 - total flux cleaned = 0.0206267 Jy ! Component: 1250 - total flux cleaned = 0.0207345 Jy ! Component: 1300 - total flux cleaned = 0.0208927 Jy ! Component: 1350 - total flux cleaned = 0.0209698 Jy ! Component: 1400 - total flux cleaned = 0.021044 Jy ! Component: 1450 - total flux cleaned = 0.0210921 Jy ! Component: 1500 - total flux cleaned = 0.0211157 Jy ! Component: 1550 - total flux cleaned = 0.0212311 Jy ! Component: 1600 - total flux cleaned = 0.0213439 Jy ! Component: 1650 - total flux cleaned = 0.0214545 Jy ! Component: 1700 - total flux cleaned = 0.0215414 Jy ! Component: 1750 - total flux cleaned = 0.0215623 Jy ! Component: 1800 - total flux cleaned = 0.0215832 Jy ! Component: 1850 - total flux cleaned = 0.0215624 Jy ! Component: 1900 - total flux cleaned = 0.0215423 Jy ! Component: 1950 - total flux cleaned = 0.0215626 Jy ! Component: 2000 - total flux cleaned = 0.0215234 Jy ! Component: 2050 - total flux cleaned = 0.0215035 Jy ! Component: 2100 - total flux cleaned = 0.0214266 Jy ! Component: 2150 - total flux cleaned = 0.0214266 Jy ! Component: 2200 - total flux cleaned = 0.0214078 Jy ! Component: 2250 - total flux cleaned = 0.0214262 Jy ! Component: 2300 - total flux cleaned = 0.021408 Jy ! Component: 2350 - total flux cleaned = 0.02139 Jy ! Component: 2400 - total flux cleaned = 0.021354 Jy ! Component: 2450 - total flux cleaned = 0.0212473 Jy ! Component: 2500 - total flux cleaned = 0.0212122 Jy ! Component: 2550 - total flux cleaned = 0.0211775 Jy ! Component: 2600 - total flux cleaned = 0.0210912 Jy ! Component: 2650 - total flux cleaned = 0.0210057 Jy ! Component: 2700 - total flux cleaned = 0.0208864 Jy ! Component: 2750 - total flux cleaned = 0.0207851 Jy ! Component: 2800 - total flux cleaned = 0.0206845 Jy ! Component: 2850 - total flux cleaned = 0.0206344 Jy ! Component: 2900 - total flux cleaned = 0.0205845 Jy ! Component: 2950 - total flux cleaned = 0.0205348 Jy ! Component: 3000 - total flux cleaned = 0.0204527 Jy ! Component: 3050 - total flux cleaned = 0.0204199 Jy ! Component: 3100 - total flux cleaned = 0.0203222 Jy ! Component: 3150 - total flux cleaned = 0.0202573 Jy ! Component: 3200 - total flux cleaned = 0.020225 Jy ! Component: 3250 - total flux cleaned = 0.0201766 Jy ! Component: 3300 - total flux cleaned = 0.0201286 Jy ! Component: 3350 - total flux cleaned = 0.0200647 Jy ! Component: 3400 - total flux cleaned = 0.0200328 Jy ! Component: 3450 - total flux cleaned = 0.0199693 Jy ! Component: 3500 - total flux cleaned = 0.0198742 Jy ! Component: 3550 - total flux cleaned = 0.0198584 Jy ! Component: 3600 - total flux cleaned = 0.0197483 Jy ! Component: 3650 - total flux cleaned = 0.0197012 Jy ! Component: 3700 - total flux cleaned = 0.0196229 Jy ! Component: 3750 - total flux cleaned = 0.0195761 Jy ! Component: 3800 - total flux cleaned = 0.0195136 Jy ! Component: 3850 - total flux cleaned = 0.0194204 Jy ! Component: 3900 - total flux cleaned = 0.0193584 Jy ! Component: 3950 - total flux cleaned = 0.0192654 Jy ! Component: 4000 - total flux cleaned = 0.019219 Jy ! Component: 4050 - total flux cleaned = 0.0191265 Jy ! Total flux subtracted in 4096 components = 0.019065 Jy ! Clean residual min=-0.000874 max=0.000934 Jy/beam ! Clean residual mean=0.000008 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.226743 Jy keep ! Adding 424 model components to the UV plane model. ! The established model now contains 588 components and 0.226743 Jy ![Exited script file: muppet] wmap "J1755-2232_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.475 x 22.85 at -1.474 degrees (North through East) ! Clean map min=-0.002018 max=0.095205 Jy/beam ! Writing clean map to FITS file: J1755-2232_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0952048 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000313853 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.988983 0.988983 1.97797 3.95593 7.91186 15.8237 31.6475 63.2949 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.095 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.475 x 22.85 at -1.474 degrees (North through East) ! Clean map min=-0.002018 max=0.095205 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1755-2232_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:32:09 2017