! Started logfile: J1752-1011_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:31:54 2017 obs J1752-1011_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1752-1011_S_2015_01_23_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.965146 visibilities/baseline/integration-bin. ! Found source: J1752-1011 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 16504 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1752-1011_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.992061Jy sigma=0.009833 ! Fit after self-cal, rms=0.943074Jy sigma=0.009363 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.452 mas, bmaj=6.421 mas, bpa=-2.557 degrees ! Estimated noise=878.666 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0405308 Jy ! Component: 100 - total flux cleaned = 0.0566883 Jy ! Total flux subtracted in 100 components = 0.0566883 Jy ! Clean residual min=-0.005307 max=0.009568 Jy/beam ! Clean residual mean=0.000008 rms=0.001745 Jy/beam ! Combined flux in latest and established models = 0.0566883 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0566883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122335Jy sigma=0.000919 ! Fit after self-cal, rms=0.121740Jy sigma=0.000914 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=7.496 mas, bpa=-2.849 degrees ! Estimated noise=577.169 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200184 Jy ! Component: 100 - total flux cleaned = 0.0305508 Jy ! Component: 150 - total flux cleaned = 0.036808 Jy ! Component: 200 - total flux cleaned = 0.0406491 Jy ! Total flux subtracted in 200 components = 0.0406491 Jy ! Clean residual min=-0.007942 max=0.013071 Jy/beam ! Clean residual mean=-0.000039 rms=0.002846 Jy/beam ! Combined flux in latest and established models = 0.0973374 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 53 components and 0.0973374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118695Jy sigma=0.000867 ! Fit after self-cal, rms=0.118482Jy sigma=0.000865 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.88 HN 1.36 KP 0.76 ! LA 1.44 MK 1.32 NL 1.15 OV 1.02 ! PT 0.71 SC 1.21 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 2.38 HN 1.48 KP 0.72 ! LA 1.48 MK 1.29 NL 1.21 OV 0.95 ! PT 0.72 SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 2.55 HN 1.38 KP 0.62 ! LA 1.17 MK 1.22 NL 1.26 OV 0.91 ! PT 0.70 SC 1.10 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.75 HN 1.22 KP 0.59 ! LA 1.19 MK 1.20 NL 0.99 OV 1.01 ! PT 0.70 SC 0.97 ! ! ! Fit before self-cal, rms=0.118482Jy sigma=0.000865 ! Fit after self-cal, rms=0.225576Jy sigma=0.000811 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=7.816 mas, bpa=-0.7383 degrees ! Estimated noise=619.154 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00879033 Jy ! Component: 100 - total flux cleaned = 0.0107883 Jy ! Component: 150 - total flux cleaned = 0.0107903 Jy ! Component: 200 - total flux cleaned = 0.0106809 Jy ! Total flux subtracted in 200 components = 0.0106809 Jy ! Clean residual min=-0.004216 max=0.004502 Jy/beam ! Clean residual mean=-0.000010 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 0.108018 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 71 components and 0.108018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225073Jy sigma=0.000801 ! Fit after self-cal, rms=0.226972Jy sigma=0.000794 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226972Jy sigma=0.000794 ! Fit after self-cal, rms=0.178887Jy sigma=0.000790 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=7.697 mas, bpa=-0.5763 degrees ! Estimated noise=606.019 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00514996 Jy ! Component: 100 - total flux cleaned = 0.00666468 Jy ! Component: 150 - total flux cleaned = 0.00680204 Jy ! Component: 200 - total flux cleaned = 0.00698662 Jy ! Total flux subtracted in 200 components = 0.00698662 Jy ! Clean residual min=-0.002988 max=0.003564 Jy/beam ! Clean residual mean=-0.000004 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.115005 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 85 components and 0.115005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178710Jy sigma=0.000786 ! Fit after self-cal, rms=0.178545Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220052 Jy ! Component: 100 - total flux cleaned = 0.0021521 Jy ! Component: 150 - total flux cleaned = 0.00205456 Jy ! Component: 200 - total flux cleaned = 0.00196271 Jy ! Total flux subtracted in 200 components = 0.00196271 Jy ! Clean residual min=-0.003245 max=0.003148 Jy/beam ! Clean residual mean=-0.000004 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.116968 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 98 components and 0.116968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178467Jy sigma=0.000784 ! Fit after self-cal, rms=0.178410Jy sigma=0.000784 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178410Jy sigma=0.000784 ! Fit after self-cal, rms=0.152275Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=7.687 mas, bpa=-0.7841 degrees ! Estimated noise=595.508 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255165 Jy ! Component: 100 - total flux cleaned = 0.00321129 Jy ! Component: 150 - total flux cleaned = 0.0035646 Jy ! Component: 200 - total flux cleaned = 0.0036061 Jy ! Total flux subtracted in 200 components = 0.0036061 Jy ! Clean residual min=-0.002533 max=0.002541 Jy/beam ! Clean residual mean=-0.000002 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.120574 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 125 components and 0.120574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152216Jy sigma=0.000781 ! Fit after self-cal, rms=0.152007Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114116 Jy ! Component: 100 - total flux cleaned = 0.00126385 Jy ! Component: 150 - total flux cleaned = 0.00130112 Jy ! Component: 200 - total flux cleaned = 0.001303 Jy ! Total flux subtracted in 200 components = 0.001303 Jy ! Clean residual min=-0.002751 max=0.002667 Jy/beam ! Clean residual mean=-0.000002 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.121877 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 136 components and 0.121877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151981Jy sigma=0.000780 ! Fit after self-cal, rms=0.151959Jy sigma=0.000780 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151959Jy sigma=0.000780 ! Fit after self-cal, rms=0.151069Jy sigma=0.000780 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.553 mas, bmaj=13.8 mas, bpa=1.135 degrees ! Estimated noise=740.707 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203167 Jy ! Component: 100 - total flux cleaned = 0.00264048 Jy ! Component: 150 - total flux cleaned = 0.00271511 Jy ! Component: 200 - total flux cleaned = 0.00279698 Jy ! Total flux subtracted in 200 components = 0.00279698 Jy ! Clean residual min=-0.003060 max=0.003572 Jy/beam ! Clean residual mean=-0.000002 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.124674 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 165 components and 0.124674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151057Jy sigma=0.000779 ! Fit after self-cal, rms=0.150966Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298067 Jy ! Component: 100 - total flux cleaned = 0.000323974 Jy ! Component: 150 - total flux cleaned = 0.000382303 Jy ! Component: 200 - total flux cleaned = 0.000382416 Jy ! Total flux subtracted in 200 components = 0.000382416 Jy ! Clean residual min=-0.003030 max=0.003492 Jy/beam ! Clean residual mean=-0.000002 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 0.125056 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 173 components and 0.125056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150961Jy sigma=0.000779 ! Fit after self-cal, rms=0.150949Jy sigma=0.000779 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=7.693 mas, bpa=-1.057 degrees ! Estimated noise=591.507 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.15 x 7.693 at -1.057 degrees (North through East) ! Clean map min=-0.0037501 max=0.057492 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.53 mas, bmaj=6.534 mas, bpa=-0.793 degrees ! Estimated noise=929.421 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0416225 Jy ! Component: 100 - total flux cleaned = 0.0630285 Jy ! Component: 150 - total flux cleaned = 0.0769455 Jy ! Component: 200 - total flux cleaned = 0.0869391 Jy ! Total flux subtracted in 200 components = 0.0869391 Jy ! Clean residual min=-0.004043 max=0.005723 Jy/beam ! Clean residual mean=0.000005 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.0869391 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0869391 Jy ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=7.693 mas, bpa=-1.057 degrees ! Estimated noise=591.507 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122802 Jy ! Component: 100 - total flux cleaned = 0.0200917 Jy ! Component: 150 - total flux cleaned = 0.0255677 Jy ! Component: 200 - total flux cleaned = 0.0294958 Jy ! Total flux subtracted in 200 components = 0.0294958 Jy ! Clean residual min=-0.002872 max=0.002923 Jy/beam ! Clean residual mean=-0.000003 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.116435 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 61 components and 0.116435 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.553 mas, bmaj=13.8 mas, bpa=1.135 degrees ! Estimated noise=740.707 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463763 Jy ! Component: 100 - total flux cleaned = 0.00617684 Jy ! Component: 150 - total flux cleaned = 0.00680074 Jy ! Component: 200 - total flux cleaned = 0.00728971 Jy ! Total flux subtracted in 200 components = 0.00728971 Jy ! Clean residual min=-0.003515 max=0.003578 Jy/beam ! Clean residual mean=-0.000003 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.123725 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00038329 Jy ! Component: 100 - total flux cleaned = 0.000651535 Jy ! Component: 150 - total flux cleaned = 0.000871425 Jy ! Component: 200 - total flux cleaned = 0.00102654 Jy ! Total flux subtracted in 200 components = 0.00102654 Jy ! Clean residual min=-0.003282 max=0.003572 Jy/beam ! Clean residual mean=-0.000003 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.124751 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 108 components and 0.124751 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=7.693 mas, bpa=-1.057 degrees ! Estimated noise=591.507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000321726 Jy ! Component: 100 - total flux cleaned = -8.28418e-05 Jy ! Component: 150 - total flux cleaned = -4.29665e-05 Jy ! Component: 200 - total flux cleaned = -5.00911e-06 Jy ! Total flux subtracted in 200 components = -5.00911e-06 Jy ! Clean residual min=-0.002420 max=0.002652 Jy/beam ! Clean residual mean=-0.000001 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.124746 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 126 components and 0.124746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150972Jy sigma=0.000779 ! Fit after self-cal, rms=0.150918Jy sigma=0.000779 wmodel J1752-1011_S_2015_01_23_pus_map.mod ! Writing 126 model components to file: J1752-1011_S_2015_01_23_pus_map.mod wobs J1752-1011_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1752-1011_S_2015_01_23_pus_uvs.fits wwins J1752-1011_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J1752-1011_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013768 Jy ! Component: 100 - total flux cleaned = 0.000179403 Jy ! Component: 150 - total flux cleaned = 0.000217875 Jy ! Component: 200 - total flux cleaned = 0.000291549 Jy ! Component: 250 - total flux cleaned = 0.000362235 Jy ! Component: 300 - total flux cleaned = 0.000465368 Jy ! Component: 350 - total flux cleaned = 0.00049949 Jy ! Component: 400 - total flux cleaned = 0.000499771 Jy ! Component: 450 - total flux cleaned = 0.000564072 Jy ! Component: 500 - total flux cleaned = 0.000595446 Jy ! Component: 550 - total flux cleaned = 0.000504455 Jy ! Component: 600 - total flux cleaned = 0.000504654 Jy ! Component: 650 - total flux cleaned = 0.000445873 Jy ! Component: 700 - total flux cleaned = 0.000359115 Jy ! Component: 750 - total flux cleaned = 0.000274594 Jy ! Component: 800 - total flux cleaned = 0.000274271 Jy ! Component: 850 - total flux cleaned = 0.000137807 Jy ! Component: 900 - total flux cleaned = 0.000111364 Jy ! Component: 950 - total flux cleaned = 5.83773e-05 Jy ! Component: 1000 - total flux cleaned = 5.84684e-05 Jy ! Component: 1050 - total flux cleaned = 7.45092e-06 Jy ! Component: 1100 - total flux cleaned = -6.79477e-05 Jy ! Component: 1150 - total flux cleaned = -9.28603e-05 Jy ! Component: 1200 - total flux cleaned = -0.000117515 Jy ! Component: 1250 - total flux cleaned = -0.000166118 Jy ! Component: 1300 - total flux cleaned = -0.000285274 Jy ! Component: 1350 - total flux cleaned = -0.00033224 Jy ! Component: 1400 - total flux cleaned = -0.000355655 Jy ! Component: 1450 - total flux cleaned = -0.000401926 Jy ! Component: 1500 - total flux cleaned = -0.000447616 Jy ! Component: 1550 - total flux cleaned = -0.000492843 Jy ! Component: 1600 - total flux cleaned = -0.000604374 Jy ! Component: 1650 - total flux cleaned = -0.000648646 Jy ! Component: 1700 - total flux cleaned = -0.000757619 Jy ! Component: 1750 - total flux cleaned = -0.000800682 Jy ! Component: 1800 - total flux cleaned = -0.000907413 Jy ! Component: 1850 - total flux cleaned = -0.000949777 Jy ! Component: 1900 - total flux cleaned = -0.00113795 Jy ! Component: 1950 - total flux cleaned = -0.00115891 Jy ! Component: 2000 - total flux cleaned = -0.00132343 Jy ! Component: 2050 - total flux cleaned = -0.00140481 Jy ! Component: 2100 - total flux cleaned = -0.00150549 Jy ! Component: 2150 - total flux cleaned = -0.0015656 Jy ! Component: 2200 - total flux cleaned = -0.00160513 Jy ! Component: 2250 - total flux cleaned = -0.00176174 Jy ! Component: 2300 - total flux cleaned = -0.0018199 Jy ! Component: 2350 - total flux cleaned = -0.00183954 Jy ! Component: 2400 - total flux cleaned = -0.00201089 Jy ! Component: 2450 - total flux cleaned = -0.00206728 Jy ! Component: 2500 - total flux cleaned = -0.00216085 Jy ! Component: 2550 - total flux cleaned = -0.00229048 Jy ! Component: 2600 - total flux cleaned = -0.00234567 Jy ! Component: 2650 - total flux cleaned = -0.00241865 Jy ! Component: 2700 - total flux cleaned = -0.00252722 Jy ! Component: 2750 - total flux cleaned = -0.0025985 Jy ! Component: 2800 - total flux cleaned = -0.00261636 Jy ! Component: 2850 - total flux cleaned = -0.00273957 Jy ! Component: 2900 - total flux cleaned = -0.00272229 Jy ! Component: 2950 - total flux cleaned = -0.00282612 Jy ! Component: 3000 - total flux cleaned = -0.00289481 Jy ! Component: 3050 - total flux cleaned = -0.00294589 Jy ! Component: 3100 - total flux cleaned = -0.00303055 Jy ! Component: 3150 - total flux cleaned = -0.00309743 Jy ! Component: 3200 - total flux cleaned = -0.00319725 Jy ! Component: 3250 - total flux cleaned = -0.00323043 Jy ! Component: 3300 - total flux cleaned = -0.00331224 Jy ! Component: 3350 - total flux cleaned = -0.00332848 Jy ! Component: 3400 - total flux cleaned = -0.00337716 Jy ! Component: 3450 - total flux cleaned = -0.0034414 Jy ! Component: 3500 - total flux cleaned = -0.00352085 Jy ! Component: 3550 - total flux cleaned = -0.00355244 Jy ! Component: 3600 - total flux cleaned = -0.00355235 Jy ! Component: 3650 - total flux cleaned = -0.00364579 Jy ! Component: 3700 - total flux cleaned = -0.0037076 Jy ! Component: 3750 - total flux cleaned = -0.00373822 Jy ! Component: 3800 - total flux cleaned = -0.0037839 Jy ! Component: 3850 - total flux cleaned = -0.00384457 Jy ! Component: 3900 - total flux cleaned = -0.00385963 Jy ! Component: 3950 - total flux cleaned = -0.00394938 Jy ! Component: 4000 - total flux cleaned = -0.0039344 Jy ! Component: 4050 - total flux cleaned = -0.0039935 Jy ! Total flux subtracted in 4096 components = -0.00403753 Jy ! Clean residual min=-0.000960 max=0.000908 Jy/beam ! Clean residual mean=-0.000002 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.120709 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 412 components and 0.120709 Jy ![Exited script file: muppet] wmap "J1752-1011_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.15 x 7.693 at -1.057 degrees (North through East) ! Clean map min=-0.0033148 max=0.05904 Jy/beam ! Writing clean map to FITS file: J1752-1011_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0590396 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000272356 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.38393 1.38393 2.76787 5.53573 11.0715 22.1429 44.2858 88.5717 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.15 x 7.693 at -1.057 degrees (North through East) ! Clean map min=-0.0033148 max=0.05904 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1752-1011_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:31:59 2017