! Started logfile: J1751-1950_S_2015_01_22_pus_uvs.log on Tue Jan 3 23:02:10 2017 obs J1751-1950_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1751-1950_S_2015_01_22_pus_uva.fits ! AN table 1: 63 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.7806 visibilities/baseline/integration-bin. ! Found source: J1751-1950 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 8852 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1751-1950_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.996352Jy sigma=0.009293 ! Fit after self-cal, rms=0.955091Jy sigma=0.008924 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.745 mas, bmaj=7.426 mas, bpa=3.332 degrees ! Estimated noise=1368.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0343538 Jy ! Component: 100 - total flux cleaned = 0.0429255 Jy ! Total flux subtracted in 100 components = 0.0429255 Jy ! Clean residual min=-0.004850 max=0.005140 Jy/beam ! Clean residual mean=-0.000007 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 0.0429255 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0429255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089291Jy sigma=0.000771 ! Fit after self-cal, rms=0.087992Jy sigma=0.000758 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.426 mas, bmaj=9.328 mas, bpa=3.269 degrees ! Estimated noise=914.138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00887709 Jy ! Component: 100 - total flux cleaned = 0.0131424 Jy ! Component: 150 - total flux cleaned = 0.0155749 Jy ! Component: 200 - total flux cleaned = 0.0169867 Jy ! Total flux subtracted in 200 components = 0.0169867 Jy ! Clean residual min=-0.003017 max=0.004081 Jy/beam ! Clean residual mean=-0.000000 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.0599122 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 41 components and 0.0599122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087058Jy sigma=0.000750 ! Fit after self-cal, rms=0.086995Jy sigma=0.000750 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.01 KP 1.01 ! LA 1.06 MK 1.00* NL 1.09 OV 0.89 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 1.03 KP 1.04 ! LA 0.98 MK 1.00* NL 1.33 OV 1.09 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.07 KP 0.90 ! LA 0.86 MK 1.00 NL 1.18 OV 0.98 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.05 KP 0.72 ! LA 0.81 MK 1.00* NL 1.04 OV 1.01 ! PT 0.90 SC 1.11 ! ! ! Fit before self-cal, rms=0.086995Jy sigma=0.000750 ! Fit after self-cal, rms=0.084792Jy sigma=0.000746 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.474 mas, bmaj=9.449 mas, bpa=2.959 degrees ! Estimated noise=915.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000632476 Jy ! Component: 100 - total flux cleaned = 0.00073902 Jy ! Component: 150 - total flux cleaned = 0.000799851 Jy ! Component: 200 - total flux cleaned = 0.000827766 Jy ! Total flux subtracted in 200 components = 0.000827766 Jy ! Clean residual min=-0.002625 max=0.003058 Jy/beam ! Clean residual mean=0.000004 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.06074 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.06074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084765Jy sigma=0.000746 ! Fit after self-cal, rms=0.084780Jy sigma=0.000745 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084780Jy sigma=0.000745 ! Fit after self-cal, rms=0.085448Jy sigma=0.000744 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=9.44 mas, bpa=2.572 degrees ! Estimated noise=918.406 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000435456 Jy ! Component: 100 - total flux cleaned = 0.000493299 Jy ! Component: 150 - total flux cleaned = 0.000543485 Jy ! Component: 200 - total flux cleaned = 0.000543875 Jy ! Total flux subtracted in 200 components = 0.000543875 Jy ! Clean residual min=-0.002575 max=0.002776 Jy/beam ! Clean residual mean=0.000004 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.0612838 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.0612838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085426Jy sigma=0.000744 ! Fit after self-cal, rms=0.085459Jy sigma=0.000744 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.3145e-05 Jy ! Component: 100 - total flux cleaned = -2.30119e-05 Jy ! Component: 150 - total flux cleaned = -2.36208e-05 Jy ! Component: 200 - total flux cleaned = -4.37623e-05 Jy ! Total flux subtracted in 200 components = -4.37623e-05 Jy ! Clean residual min=-0.002469 max=0.002618 Jy/beam ! Clean residual mean=0.000004 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.0612401 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.0612401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085445Jy sigma=0.000744 ! Fit after self-cal, rms=0.085437Jy sigma=0.000744 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085437Jy sigma=0.000744 ! Fit after self-cal, rms=0.085687Jy sigma=0.000744 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.476 mas, bmaj=9.419 mas, bpa=2.161 degrees ! Estimated noise=919.081 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000250424 Jy ! Component: 100 - total flux cleaned = 0.000300283 Jy ! Component: 150 - total flux cleaned = 0.000343735 Jy ! Component: 200 - total flux cleaned = 0.000342644 Jy ! Total flux subtracted in 200 components = 0.000342644 Jy ! Clean residual min=-0.002523 max=0.002646 Jy/beam ! Clean residual mean=0.000004 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.0615827 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.0615827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085671Jy sigma=0.000744 ! Fit after self-cal, rms=0.085670Jy sigma=0.000744 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.47196e-05 Jy ! Component: 100 - total flux cleaned = -8.60548e-05 Jy ! Component: 150 - total flux cleaned = -4.98495e-05 Jy ! Component: 200 - total flux cleaned = -3.40515e-05 Jy ! Total flux subtracted in 200 components = -3.40515e-05 Jy ! Clean residual min=-0.002524 max=0.002689 Jy/beam ! Clean residual mean=0.000004 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.0615487 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.0615487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085660Jy sigma=0.000744 ! Fit after self-cal, rms=0.085655Jy sigma=0.000744 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085655Jy sigma=0.000744 ! Fit after self-cal, rms=0.085754Jy sigma=0.000744 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.663 mas, bmaj=16.89 mas, bpa=-2.932 degrees ! Estimated noise=1118.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000482307 Jy ! Component: 100 - total flux cleaned = 0.000515343 Jy ! Component: 150 - total flux cleaned = 0.000555625 Jy ! Component: 200 - total flux cleaned = 0.0005894 Jy ! Total flux subtracted in 200 components = 0.0005894 Jy ! Clean residual min=-0.002376 max=0.002027 Jy/beam ! Clean residual mean=0.000005 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.0621381 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.0621381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085746Jy sigma=0.000744 ! Fit after self-cal, rms=0.085743Jy sigma=0.000743 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.42712e-05 Jy ! Component: 100 - total flux cleaned = 9.42201e-05 Jy ! Component: 150 - total flux cleaned = 0.000130143 Jy ! Component: 200 - total flux cleaned = 0.000150146 Jy ! Total flux subtracted in 200 components = 0.000150146 Jy ! Clean residual min=-0.002363 max=0.002029 Jy/beam ! Clean residual mean=0.000006 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.0622882 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 61 components and 0.0622882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085740Jy sigma=0.000744 ! Fit after self-cal, rms=0.085734Jy sigma=0.000743 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=9.394 mas, bpa=1.752 degrees ! Estimated noise=918.602 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 9.394 at 1.752 degrees (North through East) ! Clean map min=-0.0023695 max=0.048731 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.761 mas, bmaj=7.394 mas, bpa=1.408 degrees ! Estimated noise=1389.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0357374 Jy ! Component: 100 - total flux cleaned = 0.0465996 Jy ! Component: 150 - total flux cleaned = 0.052299 Jy ! Component: 200 - total flux cleaned = 0.0554144 Jy ! Total flux subtracted in 200 components = 0.0554144 Jy ! Clean residual min=-0.004976 max=0.004739 Jy/beam ! Clean residual mean=-0.000002 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.0554144 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0554144 Jy ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=9.394 mas, bpa=1.752 degrees ! Estimated noise=918.602 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355438 Jy ! Component: 100 - total flux cleaned = 0.00410655 Jy ! Component: 150 - total flux cleaned = 0.0045573 Jy ! Component: 200 - total flux cleaned = 0.00493152 Jy ! Total flux subtracted in 200 components = 0.00493152 Jy ! Clean residual min=-0.002681 max=0.002757 Jy/beam ! Clean residual mean=0.000003 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.0603459 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 38 components and 0.0603459 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.663 mas, bmaj=16.89 mas, bpa=-2.932 degrees ! Estimated noise=1118.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014561 Jy ! Component: 100 - total flux cleaned = 0.00157461 Jy ! Component: 150 - total flux cleaned = 0.00164361 Jy ! Component: 200 - total flux cleaned = 0.00170092 Jy ! Total flux subtracted in 200 components = 0.00170092 Jy ! Clean residual min=-0.002397 max=0.001995 Jy/beam ! Clean residual mean=0.000006 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.0620468 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.89498e-05 Jy ! Component: 100 - total flux cleaned = 9.14004e-05 Jy ! Component: 150 - total flux cleaned = 0.000129075 Jy ! Component: 200 - total flux cleaned = 0.000162036 Jy ! Total flux subtracted in 200 components = 0.000162036 Jy ! Clean residual min=-0.002389 max=0.002023 Jy/beam ! Clean residual mean=0.000006 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.0622089 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 51 components and 0.0622089 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=9.394 mas, bpa=1.752 degrees ! Estimated noise=918.602 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201728 Jy ! Component: 100 - total flux cleaned = -0.000269328 Jy ! Component: 150 - total flux cleaned = -0.000297852 Jy ! Component: 200 - total flux cleaned = -0.000321451 Jy ! Total flux subtracted in 200 components = -0.000321451 Jy ! Clean residual min=-0.002515 max=0.002640 Jy/beam ! Clean residual mean=0.000004 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.0618874 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 61 components and 0.0618874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085735Jy sigma=0.000744 ! Fit after self-cal, rms=0.085729Jy sigma=0.000743 wmodel J1751-1950_S_2015_01_22_pus_map.mod ! Writing 61 model components to file: J1751-1950_S_2015_01_22_pus_map.mod wobs J1751-1950_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1751-1950_S_2015_01_22_pus_uvs.fits wwins J1751-1950_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1751-1950_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000409602 Jy ! Component: 100 - total flux cleaned = 0.00044749 Jy ! Component: 150 - total flux cleaned = 0.000526677 Jy ! Component: 200 - total flux cleaned = 0.000526542 Jy ! Component: 250 - total flux cleaned = 0.000560587 Jy ! Component: 300 - total flux cleaned = 0.000593959 Jy ! Component: 350 - total flux cleaned = 0.000750653 Jy ! Component: 400 - total flux cleaned = 0.000870441 Jy ! Component: 450 - total flux cleaned = 0.000958372 Jy ! Component: 500 - total flux cleaned = 0.00109992 Jy ! Component: 550 - total flux cleaned = 0.00120942 Jy ! Component: 600 - total flux cleaned = 0.00128888 Jy ! Component: 650 - total flux cleaned = 0.00139261 Jy ! Component: 700 - total flux cleaned = 0.00151881 Jy ! Component: 750 - total flux cleaned = 0.00159246 Jy ! Component: 800 - total flux cleaned = 0.00166382 Jy ! Component: 850 - total flux cleaned = 0.00173347 Jy ! Component: 900 - total flux cleaned = 0.00180231 Jy ! Component: 950 - total flux cleaned = 0.00186901 Jy ! Component: 1000 - total flux cleaned = 0.00191296 Jy ! Component: 1050 - total flux cleaned = 0.00199861 Jy ! Component: 1100 - total flux cleaned = 0.00206104 Jy ! Component: 1150 - total flux cleaned = 0.00208144 Jy ! Component: 1200 - total flux cleaned = 0.0021611 Jy ! Component: 1250 - total flux cleaned = 0.00214102 Jy ! Component: 1300 - total flux cleaned = 0.00216028 Jy ! Component: 1350 - total flux cleaned = 0.00219801 Jy ! Component: 1400 - total flux cleaned = 0.00223468 Jy ! Component: 1450 - total flux cleaned = 0.00227069 Jy ! Component: 1500 - total flux cleaned = 0.00230605 Jy ! Component: 1550 - total flux cleaned = 0.00228843 Jy ! Component: 1600 - total flux cleaned = 0.00232305 Jy ! Component: 1650 - total flux cleaned = 0.00235709 Jy ! Component: 1700 - total flux cleaned = 0.00234028 Jy ! Component: 1750 - total flux cleaned = 0.00232402 Jy ! Component: 1800 - total flux cleaned = 0.00237252 Jy ! Component: 1850 - total flux cleaned = 0.00234045 Jy ! Component: 1900 - total flux cleaned = 0.00232457 Jy ! Component: 1950 - total flux cleaned = 0.00230909 Jy ! Component: 2000 - total flux cleaned = 0.00230892 Jy ! Component: 2050 - total flux cleaned = 0.00227868 Jy ! Component: 2100 - total flux cleaned = 0.00221945 Jy ! Component: 2150 - total flux cleaned = 0.00217548 Jy ! Component: 2200 - total flux cleaned = 0.00213185 Jy ! Component: 2250 - total flux cleaned = 0.00204553 Jy ! Component: 2300 - total flux cleaned = 0.00200272 Jy ! Component: 2350 - total flux cleaned = 0.00190403 Jy ! Component: 2400 - total flux cleaned = 0.00184819 Jy ! Component: 2450 - total flux cleaned = 0.00183418 Jy ! Component: 2500 - total flux cleaned = 0.00176526 Jy ! Component: 2550 - total flux cleaned = 0.0017379 Jy ! Component: 2600 - total flux cleaned = 0.00168356 Jy ! Component: 2650 - total flux cleaned = 0.00164311 Jy ! Component: 2700 - total flux cleaned = 0.00158945 Jy ! Component: 2750 - total flux cleaned = 0.00153613 Jy ! Component: 2800 - total flux cleaned = 0.00150956 Jy ! Component: 2850 - total flux cleaned = 0.00143044 Jy ! Component: 2900 - total flux cleaned = 0.00135187 Jy ! Component: 2950 - total flux cleaned = 0.00124767 Jy ! Component: 3000 - total flux cleaned = 0.00118281 Jy ! Component: 3050 - total flux cleaned = 0.00115691 Jy ! Component: 3100 - total flux cleaned = 0.00111831 Jy ! Component: 3150 - total flux cleaned = 0.00109256 Jy ! Component: 3200 - total flux cleaned = 0.00104142 Jy ! Component: 3250 - total flux cleaned = 0.00100319 Jy ! Component: 3300 - total flux cleaned = 0.000952256 Jy ! Component: 3350 - total flux cleaned = 0.000914152 Jy ! Component: 3400 - total flux cleaned = 0.000850763 Jy ! Component: 3450 - total flux cleaned = 0.000812785 Jy ! Component: 3500 - total flux cleaned = 0.000749359 Jy ! Component: 3550 - total flux cleaned = 0.000724019 Jy ! Component: 3600 - total flux cleaned = 0.000673256 Jy ! Component: 3650 - total flux cleaned = 0.000622503 Jy ! Component: 3700 - total flux cleaned = 0.000571705 Jy ! Component: 3750 - total flux cleaned = 0.000508144 Jy ! Component: 3800 - total flux cleaned = 0.000482716 Jy ! Component: 3850 - total flux cleaned = 0.000418865 Jy ! Component: 3900 - total flux cleaned = 0.000393275 Jy ! Component: 3950 - total flux cleaned = 0.000380443 Jy ! Component: 4000 - total flux cleaned = 0.000354592 Jy ! Component: 4050 - total flux cleaned = 0.000354546 Jy ! Total flux subtracted in 4096 components = 0.000341469 Jy ! Clean residual min=-0.000863 max=0.000783 Jy/beam ! Clean residual mean=0.000003 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.0622289 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 301 components and 0.0622289 Jy ![Exited script file: muppet] wmap "J1751-1950_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 9.394 at 1.752 degrees (North through East) ! Clean map min=-0.0021822 max=0.048197 Jy/beam ! Writing clean map to FITS file: J1751-1950_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0481966 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000208032 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.2949 1.2949 2.5898 5.17959 10.3592 20.7184 41.4367 82.8735 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.048 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 9.394 at 1.752 degrees (North through East) ! Clean map min=-0.0021822 max=0.048197 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1751-1950_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 23:02:16 2017