! Started logfile: J1748+3404_S_2015_01_22_pus_uvs.log on Tue Jan 3 23:01:58 2017 obs J1748+3404_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1748+3404_S_2015_01_22_pus_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1748+3404 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 3360 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1748+3404_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.854202Jy sigma=0.011008 ! Fit after self-cal, rms=0.848571Jy sigma=0.010944 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.521 mas, bmaj=8.393 mas, bpa=20.41 degrees ! Estimated noise=1358.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.116486 Jy ! Component: 100 - total flux cleaned = 0.143762 Jy ! Total flux subtracted in 100 components = 0.143762 Jy ! Clean residual min=-0.008423 max=0.010219 Jy/beam ! Clean residual mean=0.000002 rms=0.002184 Jy/beam ! Combined flux in latest and established models = 0.143762 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.143762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069000Jy sigma=0.000821 ! Fit after self-cal, rms=0.069009Jy sigma=0.000821 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=9.34 mas, bpa=18.39 degrees ! Estimated noise=962.863 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109692 Jy ! Component: 100 - total flux cleaned = 0.0155336 Jy ! Component: 150 - total flux cleaned = 0.0183325 Jy ! Component: 200 - total flux cleaned = 0.020118 Jy ! Total flux subtracted in 200 components = 0.020118 Jy ! Clean residual min=-0.007022 max=0.007020 Jy/beam ! Clean residual mean=0.000008 rms=0.001639 Jy/beam ! Combined flux in latest and established models = 0.163881 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 27 components and 0.16388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067027Jy sigma=0.000804 ! Fit after self-cal, rms=0.067038Jy sigma=0.000804 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.92 KP 1.07 ! LA 1.02 MK 1.01 NL 1.00 OV 0.97 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.03 KP 1.00 ! LA 0.95 MK 1.03 NL 1.13 OV 0.99 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.98 KP 0.87 ! LA 0.80 MK 1.10 NL 1.31 OV 0.93 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.94 KP 0.80 ! LA 0.89 MK 1.04 NL 1.04 OV 1.00 ! PT 1.08 SC 0.96 ! ! ! Fit before self-cal, rms=0.067038Jy sigma=0.000804 ! Fit after self-cal, rms=0.062253Jy sigma=0.000766 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=9.354 mas, bpa=18.31 degrees ! Estimated noise=960.254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000849479 Jy ! Component: 100 - total flux cleaned = -0.000956419 Jy ! Component: 150 - total flux cleaned = -0.000991962 Jy ! Component: 200 - total flux cleaned = -0.00105234 Jy ! Total flux subtracted in 200 components = -0.00105234 Jy ! Clean residual min=-0.003371 max=0.002535 Jy/beam ! Clean residual mean=0.000002 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.162828 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.162828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062231Jy sigma=0.000766 ! Fit after self-cal, rms=0.062221Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062221Jy sigma=0.000765 ! Fit after self-cal, rms=0.062234Jy sigma=0.000765 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=9.359 mas, bpa=18.31 degrees ! Estimated noise=960.037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000692284 Jy ! Component: 100 - total flux cleaned = -0.00078884 Jy ! Component: 150 - total flux cleaned = -0.000788726 Jy ! Component: 200 - total flux cleaned = -0.000802689 Jy ! Total flux subtracted in 200 components = -0.000802689 Jy ! Clean residual min=-0.003267 max=0.002507 Jy/beam ! Clean residual mean=0.000002 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.162025 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.162025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062222Jy sigma=0.000765 ! Fit after self-cal, rms=0.062223Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.5981e-06 Jy ! Component: 100 - total flux cleaned = -7.24284e-06 Jy ! Component: 150 - total flux cleaned = -7.14148e-06 Jy ! Component: 200 - total flux cleaned = -7.19803e-06 Jy ! Total flux subtracted in 200 components = -7.19803e-06 Jy ! Clean residual min=-0.003199 max=0.002492 Jy/beam ! Clean residual mean=0.000002 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.162018 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 0.162018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062216Jy sigma=0.000765 ! Fit after self-cal, rms=0.062217Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062217Jy sigma=0.000765 ! Fit after self-cal, rms=0.062229Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=9.363 mas, bpa=18.32 degrees ! Estimated noise=959.747 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000507026 Jy ! Component: 100 - total flux cleaned = -0.00060202 Jy ! Component: 150 - total flux cleaned = -0.000636997 Jy ! Component: 200 - total flux cleaned = -0.000657982 Jy ! Total flux subtracted in 200 components = -0.000657982 Jy ! Clean residual min=-0.003137 max=0.002453 Jy/beam ! Clean residual mean=0.000002 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.16136 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.16136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062221Jy sigma=0.000765 ! Fit after self-cal, rms=0.062222Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.29575e-06 Jy ! Component: 100 - total flux cleaned = 5.77909e-06 Jy ! Component: 150 - total flux cleaned = 5.63464e-06 Jy ! Component: 200 - total flux cleaned = 1.46826e-05 Jy ! Total flux subtracted in 200 components = 1.46826e-05 Jy ! Clean residual min=-0.003101 max=0.002446 Jy/beam ! Clean residual mean=0.000002 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.161375 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.161375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062218Jy sigma=0.000765 ! Fit after self-cal, rms=0.062219Jy sigma=0.000765 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062219Jy sigma=0.000765 ! Fit after self-cal, rms=0.062227Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.2 mas, bmaj=14.35 mas, bpa=7.438 degrees ! Estimated noise=1232.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.34423e-07 Jy ! Component: 100 - total flux cleaned = 1.18462e-05 Jy ! Component: 150 - total flux cleaned = 1.21256e-05 Jy ! Component: 200 - total flux cleaned = 1.95699e-05 Jy ! Total flux subtracted in 200 components = 1.95699e-05 Jy ! Clean residual min=-0.003118 max=0.002113 Jy/beam ! Clean residual mean=0.000004 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.161395 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 0.161395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062228Jy sigma=0.000765 ! Fit after self-cal, rms=0.062229Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.04322e-06 Jy ! Component: 100 - total flux cleaned = 1.75061e-06 Jy ! Component: 150 - total flux cleaned = 8.34725e-06 Jy ! Component: 200 - total flux cleaned = 1.41679e-05 Jy ! Total flux subtracted in 200 components = 1.41679e-05 Jy ! Clean residual min=-0.003131 max=0.002087 Jy/beam ! Clean residual mean=0.000004 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.161409 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 63 components and 0.161409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062230Jy sigma=0.000765 ! Fit after self-cal, rms=0.062231Jy sigma=0.000765 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=9.366 mas, bpa=18.33 degrees ! Estimated noise=959.552 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.084 x 9.366 at 18.33 degrees (North through East) ! Clean map min=-0.0031259 max=0.15112 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.549 mas, bmaj=8.382 mas, bpa=20.3 degrees ! Estimated noise=1354.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11611 Jy ! Component: 100 - total flux cleaned = 0.142922 Jy ! Component: 150 - total flux cleaned = 0.152596 Jy ! Component: 200 - total flux cleaned = 0.15512 Jy ! Total flux subtracted in 200 components = 0.15512 Jy ! Clean residual min=-0.003914 max=0.003657 Jy/beam ! Clean residual mean=0.000000 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.15512 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.15512 Jy ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=9.366 mas, bpa=18.33 degrees ! Estimated noise=959.552 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274149 Jy ! Component: 100 - total flux cleaned = 0.00405731 Jy ! Component: 150 - total flux cleaned = 0.00451273 Jy ! Component: 200 - total flux cleaned = 0.00487551 Jy ! Total flux subtracted in 200 components = 0.00487551 Jy ! Clean residual min=-0.003429 max=0.002531 Jy/beam ! Clean residual mean=0.000002 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.159995 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 42 components and 0.159995 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.2 mas, bmaj=14.35 mas, bpa=7.438 degrees ! Estimated noise=1232.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111805 Jy ! Component: 100 - total flux cleaned = 0.00131448 Jy ! Component: 150 - total flux cleaned = 0.00138086 Jy ! Component: 200 - total flux cleaned = 0.00143579 Jy ! Total flux subtracted in 200 components = 0.00143579 Jy ! Clean residual min=-0.003219 max=0.002127 Jy/beam ! Clean residual mean=0.000004 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.161431 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.56985e-05 Jy ! Component: 100 - total flux cleaned = 7.72238e-05 Jy ! Component: 150 - total flux cleaned = 0.000104683 Jy ! Component: 200 - total flux cleaned = 0.000123063 Jy ! Total flux subtracted in 200 components = 0.000123063 Jy ! Clean residual min=-0.003151 max=0.002142 Jy/beam ! Clean residual mean=0.000004 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.161554 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 62 components and 0.161554 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=9.366 mas, bpa=18.33 degrees ! Estimated noise=959.552 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000316136 Jy ! Component: 100 - total flux cleaned = -0.000297054 Jy ! Component: 150 - total flux cleaned = -0.000329492 Jy ! Component: 200 - total flux cleaned = -0.000369488 Jy ! Total flux subtracted in 200 components = -0.000369488 Jy ! Clean residual min=-0.003142 max=0.002448 Jy/beam ! Clean residual mean=0.000001 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.161185 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 70 components and 0.161185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062228Jy sigma=0.000765 ! Fit after self-cal, rms=0.062227Jy sigma=0.000765 wmodel J1748+3404_S_2015_01_22_pus_map.mod ! Writing 70 model components to file: J1748+3404_S_2015_01_22_pus_map.mod wobs J1748+3404_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1748+3404_S_2015_01_22_pus_uvs.fits wwins J1748+3404_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1748+3404_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100981 Jy ! Component: 100 - total flux cleaned = -0.00121275 Jy ! Component: 150 - total flux cleaned = -0.00151006 Jy ! Component: 200 - total flux cleaned = -0.00168257 Jy ! Component: 250 - total flux cleaned = -0.0018431 Jy ! Component: 300 - total flux cleaned = -0.0020558 Jy ! Component: 350 - total flux cleaned = -0.00211415 Jy ! Component: 400 - total flux cleaned = -0.00222753 Jy ! Component: 450 - total flux cleaned = -0.00233664 Jy ! Component: 500 - total flux cleaned = -0.00246775 Jy ! Component: 550 - total flux cleaned = -0.0025187 Jy ! Component: 600 - total flux cleaned = -0.00249441 Jy ! Component: 650 - total flux cleaned = -0.00239913 Jy ! Component: 700 - total flux cleaned = -0.0023061 Jy ! Component: 750 - total flux cleaned = -0.00230656 Jy ! Component: 800 - total flux cleaned = -0.00219468 Jy ! Component: 850 - total flux cleaned = -0.00215081 Jy ! Component: 900 - total flux cleaned = -0.00200184 Jy ! Component: 950 - total flux cleaned = -0.00193977 Jy ! Component: 1000 - total flux cleaned = -0.00189818 Jy ! Component: 1050 - total flux cleaned = -0.00177847 Jy ! Component: 1100 - total flux cleaned = -0.00173962 Jy ! Component: 1150 - total flux cleaned = -0.00166323 Jy ! Component: 1200 - total flux cleaned = -0.00168207 Jy ! Component: 1250 - total flux cleaned = -0.00160824 Jy ! Component: 1300 - total flux cleaned = -0.00157228 Jy ! Component: 1350 - total flux cleaned = -0.00155431 Jy ! Component: 1400 - total flux cleaned = -0.00155405 Jy ! Component: 1450 - total flux cleaned = -0.00150214 Jy ! Component: 1500 - total flux cleaned = -0.00148511 Jy ! Component: 1550 - total flux cleaned = -0.00143456 Jy ! Component: 1600 - total flux cleaned = -0.00138516 Jy ! Component: 1650 - total flux cleaned = -0.00136898 Jy ! Component: 1700 - total flux cleaned = -0.00132092 Jy ! Component: 1750 - total flux cleaned = -0.00132091 Jy ! Component: 1800 - total flux cleaned = -0.00130525 Jy ! Component: 1850 - total flux cleaned = -0.00128995 Jy ! Component: 1900 - total flux cleaned = -0.00127466 Jy ! Component: 1950 - total flux cleaned = -0.0012595 Jy ! Component: 2000 - total flux cleaned = -0.00122929 Jy ! Component: 2050 - total flux cleaned = -0.0012145 Jy ! Component: 2100 - total flux cleaned = -0.00119975 Jy ! Component: 2150 - total flux cleaned = -0.00115644 Jy ! Component: 2200 - total flux cleaned = -0.00115659 Jy ! Component: 2250 - total flux cleaned = -0.0011285 Jy ! Component: 2300 - total flux cleaned = -0.00110071 Jy ! Component: 2350 - total flux cleaned = -0.00110089 Jy ! Component: 2400 - total flux cleaned = -0.00111457 Jy ! Component: 2450 - total flux cleaned = -0.00112789 Jy ! Component: 2500 - total flux cleaned = -0.00108796 Jy ! Component: 2550 - total flux cleaned = -0.00110127 Jy ! Component: 2600 - total flux cleaned = -0.00111431 Jy ! Component: 2650 - total flux cleaned = -0.00110129 Jy ! Component: 2700 - total flux cleaned = -0.00106275 Jy ! Component: 2750 - total flux cleaned = -0.00107557 Jy ! Component: 2800 - total flux cleaned = -0.00108817 Jy ! Component: 2850 - total flux cleaned = -0.00106312 Jy ! Component: 2900 - total flux cleaned = -0.00108789 Jy ! Component: 2950 - total flux cleaned = -0.0010633 Jy ! Component: 3000 - total flux cleaned = -0.00103878 Jy ! Component: 3050 - total flux cleaned = -0.00105099 Jy ! Component: 3100 - total flux cleaned = -0.00103888 Jy ! Component: 3150 - total flux cleaned = -0.00101483 Jy ! Component: 3200 - total flux cleaned = -0.000967537 Jy ! Component: 3250 - total flux cleaned = -0.000944143 Jy ! Component: 3300 - total flux cleaned = -0.00093265 Jy ! Component: 3350 - total flux cleaned = -0.000897978 Jy ! Component: 3400 - total flux cleaned = -0.000886495 Jy ! Component: 3450 - total flux cleaned = -0.000886437 Jy ! Component: 3500 - total flux cleaned = -0.000863704 Jy ! Component: 3550 - total flux cleaned = -0.000829815 Jy ! Component: 3600 - total flux cleaned = -0.00080742 Jy ! Component: 3650 - total flux cleaned = -0.000818545 Jy ! Component: 3700 - total flux cleaned = -0.000785135 Jy ! Component: 3750 - total flux cleaned = -0.000796227 Jy ! Component: 3800 - total flux cleaned = -0.000785128 Jy ! Component: 3850 - total flux cleaned = -0.000763055 Jy ! Component: 3900 - total flux cleaned = -0.0007741 Jy ! Component: 3950 - total flux cleaned = -0.000763063 Jy ! Component: 4000 - total flux cleaned = -0.000741235 Jy ! Component: 4050 - total flux cleaned = -0.000730415 Jy ! Total flux subtracted in 4096 components = -0.000730436 Jy ! Clean residual min=-0.000645 max=0.000665 Jy/beam ! Clean residual mean=0.000000 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.160454 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 316 components and 0.160454 Jy ![Exited script file: muppet] wmap "J1748+3404_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.084 x 9.366 at 18.33 degrees (North through East) ! Clean map min=-0.0026063 max=0.15106 Jy/beam ! Writing clean map to FITS file: J1748+3404_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.151064 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000181982 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.3614 0.3614 0.722799 1.4456 2.8912 5.78239 11.5648 23.1296 46.2591 92.5183 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.151 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.084 x 9.366 at 18.33 degrees (North through East) ! Clean map min=-0.0026063 max=0.15106 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1748+3404_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 23:02:04 2017