! Started logfile: J1748+0832_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:33:44 2017 obs J1748+0832_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1748+0832_S_2014_01_04_pus_uva.fits ! AN table 1: 108 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J1748+0832 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7776 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1748+0832_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 270 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 270 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 270 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 270 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.984473Jy sigma=0.012653 ! Fit after self-cal, rms=0.945427Jy sigma=0.012154 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.839 mas, bmaj=5.626 mas, bpa=1.592 degrees ! Estimated noise=924.854 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0447871 Jy ! Component: 100 - total flux cleaned = 0.0564578 Jy ! Total flux subtracted in 100 components = 0.0564578 Jy ! Clean residual min=-0.007646 max=0.010160 Jy/beam ! Clean residual mean=0.000012 rms=0.002326 Jy/beam ! Combined flux in latest and established models = 0.0564578 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0564578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087782Jy sigma=0.000975 ! Fit after self-cal, rms=0.087189Jy sigma=0.000968 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=6.182 mas, bpa=1.479 degrees ! Estimated noise=660.896 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106988 Jy ! Component: 100 - total flux cleaned = 0.0175779 Jy ! Component: 150 - total flux cleaned = 0.0225301 Jy ! Component: 200 - total flux cleaned = 0.0261774 Jy ! Total flux subtracted in 200 components = 0.0261774 Jy ! Clean residual min=-0.007392 max=0.014185 Jy/beam ! Clean residual mean=0.000033 rms=0.002880 Jy/beam ! Combined flux in latest and established models = 0.0826352 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 34 components and 0.0826352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085699Jy sigma=0.000947 ! Fit after self-cal, rms=0.085837Jy sigma=0.000945 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* KP 1.00* LA 0.90 ! MK 0.95 NL 1.30 OV 0.96 PT 0.82 ! SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.00* KP 1.00* LA 0.88 ! MK 0.96 NL 1.43 OV 0.96 PT 0.76 ! SC 1.20 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* KP 1.00* LA 0.70 ! MK 1.05 NL 1.23 OV 0.98 PT 0.71 ! SC 1.16 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* KP 1.00* LA 0.88 ! MK 1.00 NL 1.16 OV 1.07 PT 0.75 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.085837Jy sigma=0.000945 ! Fit after self-cal, rms=0.088160Jy sigma=0.000929 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.421 mas, bmaj=6.356 mas, bpa=0.7096 degrees ! Estimated noise=654.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107196 Jy ! Component: 100 - total flux cleaned = 0.0137159 Jy ! Component: 150 - total flux cleaned = 0.0151934 Jy ! Component: 200 - total flux cleaned = 0.0163728 Jy ! Total flux subtracted in 200 components = 0.0163728 Jy ! Clean residual min=-0.005646 max=0.008928 Jy/beam ! Clean residual mean=0.000005 rms=0.001808 Jy/beam ! Combined flux in latest and established models = 0.0990079 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 64 components and 0.099008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086827Jy sigma=0.000910 ! Fit after self-cal, rms=0.086532Jy sigma=0.000900 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086532Jy sigma=0.000900 ! Fit after self-cal, rms=0.084232Jy sigma=0.000891 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.443 mas, bmaj=6.363 mas, bpa=0.8857 degrees ! Estimated noise=626.631 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00563936 Jy ! Component: 100 - total flux cleaned = 0.00691421 Jy ! Component: 150 - total flux cleaned = 0.00744246 Jy ! Component: 200 - total flux cleaned = 0.00787857 Jy ! Total flux subtracted in 200 components = 0.00787857 Jy ! Clean residual min=-0.004934 max=0.006476 Jy/beam ! Clean residual mean=0.000006 rms=0.001321 Jy/beam ! Combined flux in latest and established models = 0.106887 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 88 components and 0.106887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083758Jy sigma=0.000886 ! Fit after self-cal, rms=0.084105Jy sigma=0.000883 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00600499 Jy ! Component: 100 - total flux cleaned = 0.00808575 Jy ! Component: 150 - total flux cleaned = 0.00941761 Jy ! Component: 200 - total flux cleaned = 0.0106257 Jy ! Total flux subtracted in 200 components = 0.0106257 Jy ! Clean residual min=-0.004120 max=0.003657 Jy/beam ! Clean residual mean=0.000001 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.117512 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 115 components and 0.117512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083594Jy sigma=0.000875 ! Fit after self-cal, rms=0.083522Jy sigma=0.000873 ! Inverting map ! Added new window around map position (-3, 29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00382032 Jy ! Component: 100 - total flux cleaned = 0.00595008 Jy ! Component: 150 - total flux cleaned = 0.00711894 Jy ! Component: 200 - total flux cleaned = 0.00753746 Jy ! Total flux subtracted in 200 components = 0.00753746 Jy ! Clean residual min=-0.003398 max=0.003120 Jy/beam ! Clean residual mean=-0.000001 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.12505 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 141 components and 0.12505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083264Jy sigma=0.000870 ! Fit after self-cal, rms=0.083265Jy sigma=0.000869 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083265Jy sigma=0.000869 ! Fit after self-cal, rms=0.088113Jy sigma=0.000867 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.541 mas, bmaj=6.376 mas, bpa=0.9884 degrees ! Estimated noise=623.612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265479 Jy ! Component: 100 - total flux cleaned = 0.0041382 Jy ! Component: 150 - total flux cleaned = 0.00503132 Jy ! Component: 200 - total flux cleaned = 0.00559423 Jy ! Total flux subtracted in 200 components = 0.00559423 Jy ! Clean residual min=-0.002791 max=0.002387 Jy/beam ! Clean residual mean=0.000001 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.130644 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 164 components and 0.130644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087979Jy sigma=0.000865 ! Fit after self-cal, rms=0.088318Jy sigma=0.000864 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000706612 Jy ! Component: 100 - total flux cleaned = 0.00118318 Jy ! Component: 150 - total flux cleaned = 0.00123243 Jy ! Component: 200 - total flux cleaned = 0.0014475 Jy ! Total flux subtracted in 200 components = 0.0014475 Jy ! Clean residual min=-0.002760 max=0.002493 Jy/beam ! Clean residual mean=-0.000000 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.132092 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 180 components and 0.132092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088242Jy sigma=0.000864 ! Fit after self-cal, rms=0.088262Jy sigma=0.000863 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088262Jy sigma=0.000863 ! Fit after self-cal, rms=0.091827Jy sigma=0.000863 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.908 mas, bmaj=10.06 mas, bpa=4.181 degrees ! Estimated noise=675.487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171614 Jy ! Component: 100 - total flux cleaned = 0.00244643 Jy ! Component: 150 - total flux cleaned = 0.00285897 Jy ! Component: 200 - total flux cleaned = 0.0030495 Jy ! Total flux subtracted in 200 components = 0.0030495 Jy ! Clean residual min=-0.002998 max=0.002309 Jy/beam ! Clean residual mean=0.000000 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.135141 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 202 components and 0.135141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091792Jy sigma=0.000862 ! Fit after self-cal, rms=0.091942Jy sigma=0.000862 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000798283 Jy ! Component: 100 - total flux cleaned = 0.000936419 Jy ! Component: 150 - total flux cleaned = 0.00102556 Jy ! Component: 200 - total flux cleaned = 0.00113389 Jy ! Total flux subtracted in 200 components = 0.00113389 Jy ! Clean residual min=-0.003132 max=0.002467 Jy/beam ! Clean residual mean=-0.000001 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.136275 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 215 components and 0.136275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091927Jy sigma=0.000862 ! Fit after self-cal, rms=0.091930Jy sigma=0.000862 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.594 mas, bmaj=6.384 mas, bpa=0.7883 degrees ! Estimated noise=621.776 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.594 x 6.384 at 0.7883 degrees (North through East) ! Clean map min=-0.0025057 max=0.051105 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=5.806 mas, bpa=1.269 degrees ! Estimated noise=895.017 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0413019 Jy ! Component: 100 - total flux cleaned = 0.0584618 Jy ! Component: 150 - total flux cleaned = 0.0703077 Jy ! Component: 200 - total flux cleaned = 0.0793922 Jy ! Total flux subtracted in 200 components = 0.0793922 Jy ! Clean residual min=-0.006723 max=0.007860 Jy/beam ! Clean residual mean=0.000005 rms=0.001800 Jy/beam ! Combined flux in latest and established models = 0.0793922 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0793922 Jy ! Inverting map and beam ! Estimated beam: bmin=3.594 mas, bmaj=6.384 mas, bpa=0.7883 degrees ! Estimated noise=621.776 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00961462 Jy ! Component: 100 - total flux cleaned = 0.0168268 Jy ! Component: 150 - total flux cleaned = 0.0227463 Jy ! Component: 200 - total flux cleaned = 0.0273216 Jy ! Total flux subtracted in 200 components = 0.0273216 Jy ! Clean residual min=-0.005167 max=0.004902 Jy/beam ! Clean residual mean=0.000011 rms=0.001305 Jy/beam ! Combined flux in latest and established models = 0.106714 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 57 components and 0.106714 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.908 mas, bmaj=10.06 mas, bpa=4.181 degrees ! Estimated noise=675.487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00606338 Jy ! Component: 100 - total flux cleaned = 0.0107217 Jy ! Component: 150 - total flux cleaned = 0.0144584 Jy ! Component: 200 - total flux cleaned = 0.0174738 Jy ! Total flux subtracted in 200 components = 0.0174738 Jy ! Clean residual min=-0.004745 max=0.004004 Jy/beam ! Clean residual mean=0.000010 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.124188 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244515 Jy ! Component: 100 - total flux cleaned = 0.00446801 Jy ! Component: 150 - total flux cleaned = 0.00615882 Jy ! Component: 200 - total flux cleaned = 0.00729887 Jy ! Total flux subtracted in 200 components = 0.00729887 Jy ! Clean residual min=-0.003837 max=0.002996 Jy/beam ! Clean residual mean=0.000004 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.131486 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 125 components and 0.131486 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.594 mas, bmaj=6.384 mas, bpa=0.7883 degrees ! Estimated noise=621.776 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176928 Jy ! Component: 100 - total flux cleaned = 0.00258069 Jy ! Component: 150 - total flux cleaned = 0.00322 Jy ! Component: 200 - total flux cleaned = 0.00371865 Jy ! Total flux subtracted in 200 components = 0.00371865 Jy ! Clean residual min=-0.003014 max=0.002725 Jy/beam ! Clean residual mean=0.000001 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.135205 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 150 components and 0.135205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092071Jy sigma=0.000863 ! Fit after self-cal, rms=0.091772Jy sigma=0.000862 wmodel J1748+0832_S_2014_01_04_pus_map.mod ! Writing 150 model components to file: J1748+0832_S_2014_01_04_pus_map.mod wobs J1748+0832_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1748+0832_S_2014_01_04_pus_uvs.fits wwins J1748+0832_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J1748+0832_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00040074 Jy ! Component: 100 - total flux cleaned = -0.00031194 Jy ! Component: 150 - total flux cleaned = -0.000270458 Jy ! Component: 200 - total flux cleaned = -0.000231634 Jy ! Component: 250 - total flux cleaned = -0.000158393 Jy ! Component: 300 - total flux cleaned = -0.000193622 Jy ! Component: 350 - total flux cleaned = -0.000226092 Jy ! Component: 400 - total flux cleaned = -0.000290009 Jy ! Component: 450 - total flux cleaned = -0.000321351 Jy ! Component: 500 - total flux cleaned = -0.000440277 Jy ! Component: 550 - total flux cleaned = -0.000382781 Jy ! Component: 600 - total flux cleaned = -0.000439218 Jy ! Component: 650 - total flux cleaned = -0.000493422 Jy ! Component: 700 - total flux cleaned = -0.000598887 Jy ! Component: 750 - total flux cleaned = -0.000676005 Jy ! Component: 800 - total flux cleaned = -0.000651042 Jy ! Component: 850 - total flux cleaned = -0.00067618 Jy ! Component: 900 - total flux cleaned = -0.000652317 Jy ! Component: 950 - total flux cleaned = -0.000699539 Jy ! Component: 1000 - total flux cleaned = -0.00070008 Jy ! Component: 1050 - total flux cleaned = -0.000791432 Jy ! Component: 1100 - total flux cleaned = -0.000791067 Jy ! Component: 1150 - total flux cleaned = -0.000790542 Jy ! Component: 1200 - total flux cleaned = -0.000769253 Jy ! Component: 1250 - total flux cleaned = -0.000790538 Jy ! Component: 1300 - total flux cleaned = -0.000749019 Jy ! Component: 1350 - total flux cleaned = -0.000770411 Jy ! Component: 1400 - total flux cleaned = -0.000790847 Jy ! Component: 1450 - total flux cleaned = -0.000811307 Jy ! Component: 1500 - total flux cleaned = -0.000851043 Jy ! Component: 1550 - total flux cleaned = -0.000869902 Jy ! Component: 1600 - total flux cleaned = -0.000850428 Jy ! Component: 1650 - total flux cleaned = -0.000774643 Jy ! Component: 1700 - total flux cleaned = -0.000737156 Jy ! Component: 1750 - total flux cleaned = -0.000736712 Jy ! Component: 1800 - total flux cleaned = -0.000718413 Jy ! Component: 1850 - total flux cleaned = -0.000718138 Jy ! Component: 1900 - total flux cleaned = -0.000700268 Jy ! Component: 1950 - total flux cleaned = -0.000717385 Jy ! Component: 2000 - total flux cleaned = -0.000734676 Jy ! Component: 2050 - total flux cleaned = -0.000717579 Jy ! Component: 2100 - total flux cleaned = -0.000768035 Jy ! Component: 2150 - total flux cleaned = -0.000784703 Jy ! Component: 2200 - total flux cleaned = -0.000801321 Jy ! Component: 2250 - total flux cleaned = -0.000866059 Jy ! Component: 2300 - total flux cleaned = -0.000865689 Jy ! Component: 2350 - total flux cleaned = -0.000786145 Jy ! Component: 2400 - total flux cleaned = -0.000770534 Jy ! Component: 2450 - total flux cleaned = -0.00077056 Jy ! Component: 2500 - total flux cleaned = -0.000739642 Jy ! Component: 2550 - total flux cleaned = -0.000724386 Jy ! Component: 2600 - total flux cleaned = -0.000754679 Jy ! Component: 2650 - total flux cleaned = -0.000799623 Jy ! Component: 2700 - total flux cleaned = -0.000814426 Jy ! Component: 2750 - total flux cleaned = -0.000873367 Jy ! Component: 2800 - total flux cleaned = -0.000917243 Jy ! Component: 2850 - total flux cleaned = -0.000931619 Jy ! Component: 2900 - total flux cleaned = -0.00097495 Jy ! Component: 2950 - total flux cleaned = -0.000989125 Jy ! Component: 3000 - total flux cleaned = -0.00108848 Jy ! Component: 3050 - total flux cleaned = -0.0011166 Jy ! Component: 3100 - total flux cleaned = -0.00114454 Jy ! Component: 3150 - total flux cleaned = -0.00115834 Jy ! Component: 3200 - total flux cleaned = -0.00122721 Jy ! Component: 3250 - total flux cleaned = -0.00126819 Jy ! Component: 3300 - total flux cleaned = -0.00130882 Jy ! Component: 3350 - total flux cleaned = -0.00129539 Jy ! Component: 3400 - total flux cleaned = -0.00130879 Jy ! Component: 3450 - total flux cleaned = -0.00132217 Jy ! Component: 3500 - total flux cleaned = -0.00132217 Jy ! Component: 3550 - total flux cleaned = -0.0013222 Jy ! Component: 3600 - total flux cleaned = -0.00133534 Jy ! Component: 3650 - total flux cleaned = -0.00140021 Jy ! Component: 3700 - total flux cleaned = -0.00140022 Jy ! Component: 3750 - total flux cleaned = -0.00143856 Jy ! Component: 3800 - total flux cleaned = -0.00145127 Jy ! Component: 3850 - total flux cleaned = -0.0015148 Jy ! Component: 3900 - total flux cleaned = -0.00154004 Jy ! Component: 3950 - total flux cleaned = -0.00156513 Jy ! Component: 4000 - total flux cleaned = -0.00156515 Jy ! Component: 4050 - total flux cleaned = -0.00157763 Jy ! Total flux subtracted in 4096 components = -0.00163953 Jy ! Clean residual min=-0.000840 max=0.000900 Jy/beam ! Clean residual mean=-0.000000 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.133566 Jy keep ! Adding 225 model components to the UV plane model. ! The established model now contains 375 components and 0.133566 Jy ![Exited script file: muppet] wmap "J1748+0832_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.594 x 6.384 at 0.7883 degrees (North through East) ! Clean map min=-0.0015924 max=0.052539 Jy/beam ! Writing clean map to FITS file: J1748+0832_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0525392 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000205887 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.17562 1.17562 2.35124 4.70247 9.40495 18.8099 37.6198 75.2396 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.594 x 6.384 at 0.7883 degrees (North through East) ! Clean map min=-0.0015924 max=0.052539 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1748+0832_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:33:49 2017