! Started logfile: J1743+3747_S_2015_01_22_pus_uvs.log on Tue Jan 3 23:01:52 2017 obs J1743+3747_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1743+3747_S_2015_01_22_pus_uva.fits ! AN table 1: 38 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1743+3747 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 4256 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1743+3747_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.805942Jy sigma=0.010176 ! Fit after self-cal, rms=0.791381Jy sigma=0.009999 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.609 mas, bmaj=9.636 mas, bpa=29.75 degrees ! Estimated noise=1367.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.158858 Jy ! Component: 100 - total flux cleaned = 0.194364 Jy ! Total flux subtracted in 100 components = 0.194364 Jy ! Clean residual min=-0.008430 max=0.013311 Jy/beam ! Clean residual mean=0.000004 rms=0.002569 Jy/beam ! Combined flux in latest and established models = 0.194364 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.194364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073125Jy sigma=0.000854 ! Fit after self-cal, rms=0.073120Jy sigma=0.000854 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=9.618 mas, bpa=28.74 degrees ! Estimated noise=871.301 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164235 Jy ! Component: 100 - total flux cleaned = 0.0238248 Jy ! Component: 150 - total flux cleaned = 0.0285366 Jy ! Component: 200 - total flux cleaned = 0.0318456 Jy ! Total flux subtracted in 200 components = 0.0318456 Jy ! Clean residual min=-0.005465 max=0.005317 Jy/beam ! Clean residual mean=0.000003 rms=0.001568 Jy/beam ! Combined flux in latest and established models = 0.22621 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 35 components and 0.22621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068950Jy sigma=0.000814 ! Fit after self-cal, rms=0.068968Jy sigma=0.000814 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.00* KP 1.13 ! LA 1.03 MK 1.00 NL 0.99 OV 0.99 ! PT 1.06 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.00* KP 1.03 ! LA 1.00 MK 0.98 NL 1.03 OV 1.02 ! PT 1.05 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.00* KP 0.88 ! LA 0.80 MK 1.04 NL 1.05 OV 0.95 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 1.00* KP 0.79 ! LA 0.89 MK 0.99 NL 1.00 OV 1.01 ! PT 1.06 SC 0.97 ! ! ! Fit before self-cal, rms=0.068968Jy sigma=0.000814 ! Fit after self-cal, rms=0.062366Jy sigma=0.000761 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.245 mas, bmaj=9.667 mas, bpa=28.67 degrees ! Estimated noise=865.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112752 Jy ! Component: 100 - total flux cleaned = -0.0015343 Jy ! Component: 150 - total flux cleaned = -0.00157494 Jy ! Component: 200 - total flux cleaned = -0.00161039 Jy ! Total flux subtracted in 200 components = -0.00161039 Jy ! Clean residual min=-0.002258 max=0.002146 Jy/beam ! Clean residual mean=-0.000001 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.2246 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.2246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062341Jy sigma=0.000760 ! Fit after self-cal, rms=0.062325Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062325Jy sigma=0.000760 ! Fit after self-cal, rms=0.062297Jy sigma=0.000760 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.247 mas, bmaj=9.679 mas, bpa=28.67 degrees ! Estimated noise=864.855 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000662821 Jy ! Component: 100 - total flux cleaned = -0.000885952 Jy ! Component: 150 - total flux cleaned = -0.000952724 Jy ! Component: 200 - total flux cleaned = -0.000999444 Jy ! Total flux subtracted in 200 components = -0.000999444 Jy ! Clean residual min=-0.002187 max=0.002070 Jy/beam ! Clean residual mean=-0.000001 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.2236 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 53 components and 0.2236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062288Jy sigma=0.000760 ! Fit after self-cal, rms=0.062288Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.3079e-05 Jy ! Component: 100 - total flux cleaned = -6.29102e-05 Jy ! Component: 150 - total flux cleaned = -7.18031e-05 Jy ! Component: 200 - total flux cleaned = -8.03406e-05 Jy ! Total flux subtracted in 200 components = -8.03406e-05 Jy ! Clean residual min=-0.002185 max=0.002052 Jy/beam ! Clean residual mean=-0.000001 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.22352 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.22352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062285Jy sigma=0.000760 ! Fit after self-cal, rms=0.062285Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062285Jy sigma=0.000760 ! Fit after self-cal, rms=0.062276Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=9.687 mas, bpa=28.67 degrees ! Estimated noise=864.621 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000379993 Jy ! Component: 100 - total flux cleaned = -0.0006273 Jy ! Component: 150 - total flux cleaned = -0.00069259 Jy ! Component: 200 - total flux cleaned = -0.000722304 Jy ! Total flux subtracted in 200 components = -0.000722304 Jy ! Clean residual min=-0.002130 max=0.002033 Jy/beam ! Clean residual mean=-0.000001 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.222797 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 62 components and 0.222797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062273Jy sigma=0.000760 ! Fit after self-cal, rms=0.062273Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.84401e-05 Jy ! Component: 100 - total flux cleaned = -4.84019e-05 Jy ! Component: 150 - total flux cleaned = -5.49775e-05 Jy ! Component: 200 - total flux cleaned = -6.13474e-05 Jy ! Total flux subtracted in 200 components = -6.13474e-05 Jy ! Clean residual min=-0.002125 max=0.002027 Jy/beam ! Clean residual mean=-0.000001 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.222736 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 70 components and 0.222736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062272Jy sigma=0.000760 ! Fit after self-cal, rms=0.062272Jy sigma=0.000760 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062272Jy sigma=0.000760 ! Fit after self-cal, rms=0.062279Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.376 mas, bmaj=10.65 mas, bpa=18.77 degrees ! Estimated noise=1035.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000751341 Jy ! Component: 100 - total flux cleaned = -0.00083997 Jy ! Component: 150 - total flux cleaned = -0.000869835 Jy ! Component: 200 - total flux cleaned = -0.000877209 Jy ! Total flux subtracted in 200 components = -0.000877209 Jy ! Clean residual min=-0.002077 max=0.001542 Jy/beam ! Clean residual mean=-0.000002 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.221859 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 82 components and 0.221859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062282Jy sigma=0.000760 ! Fit after self-cal, rms=0.062282Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.20955e-05 Jy ! Component: 100 - total flux cleaned = -2.26271e-05 Jy ! Component: 150 - total flux cleaned = -3.09697e-05 Jy ! Component: 200 - total flux cleaned = -3.09696e-05 Jy ! Total flux subtracted in 200 components = -3.09696e-05 Jy ! Clean residual min=-0.002034 max=0.001526 Jy/beam ! Clean residual mean=-0.000002 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.221828 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 92 components and 0.221828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062284Jy sigma=0.000760 ! Fit after self-cal, rms=0.062284Jy sigma=0.000760 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.249 mas, bmaj=9.693 mas, bpa=28.66 degrees ! Estimated noise=864.581 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.249 x 9.693 at 28.66 degrees (North through East) ! Clean map min=-0.0019948 max=0.20641 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.616 mas, bmaj=9.761 mas, bpa=29.65 degrees ! Estimated noise=1368.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.158986 Jy ! Component: 100 - total flux cleaned = 0.194393 Jy ! Component: 150 - total flux cleaned = 0.206977 Jy ! Component: 200 - total flux cleaned = 0.212612 Jy ! Total flux subtracted in 200 components = 0.212612 Jy ! Clean residual min=-0.003542 max=0.004370 Jy/beam ! Clean residual mean=0.000001 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.212612 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.212612 Jy ! Inverting map and beam ! Estimated beam: bmin=3.249 mas, bmaj=9.693 mas, bpa=28.66 degrees ! Estimated noise=864.581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14, 31.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00464648 Jy ! Component: 100 - total flux cleaned = 0.00711741 Jy ! Component: 150 - total flux cleaned = 0.00825388 Jy ! Component: 200 - total flux cleaned = 0.00855647 Jy ! Total flux subtracted in 200 components = 0.00855647 Jy ! Clean residual min=-0.001988 max=0.002134 Jy/beam ! Clean residual mean=-0.000001 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.221168 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 44 components and 0.221168 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.376 mas, bmaj=10.65 mas, bpa=18.77 degrees ! Estimated noise=1035.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000693092 Jy ! Component: 100 - total flux cleaned = 0.000772644 Jy ! Component: 150 - total flux cleaned = 0.000795705 Jy ! Component: 200 - total flux cleaned = 0.000796014 Jy ! Total flux subtracted in 200 components = 0.000796014 Jy ! Clean residual min=-0.001996 max=0.001676 Jy/beam ! Clean residual mean=-0.000002 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.221964 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.51575e-05 Jy ! Component: 100 - total flux cleaned = 4.24795e-05 Jy ! Component: 150 - total flux cleaned = 5.49705e-05 Jy ! Component: 200 - total flux cleaned = 5.4998e-05 Jy ! Total flux subtracted in 200 components = 5.4998e-05 Jy ! Clean residual min=-0.001979 max=0.001656 Jy/beam ! Clean residual mean=-0.000002 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.222019 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 73 components and 0.222019 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.249 mas, bmaj=9.693 mas, bpa=28.66 degrees ! Estimated noise=864.581 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217078 Jy ! Component: 100 - total flux cleaned = -0.000188963 Jy ! Component: 150 - total flux cleaned = -0.000138664 Jy ! Component: 200 - total flux cleaned = -9.42524e-05 Jy ! Total flux subtracted in 200 components = -9.42524e-05 Jy ! Clean residual min=-0.001860 max=0.002032 Jy/beam ! Clean residual mean=-0.000001 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.221925 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 92 components and 0.221925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062250Jy sigma=0.000760 ! Fit after self-cal, rms=0.062248Jy sigma=0.000760 wmodel J1743+3747_S_2015_01_22_pus_map.mod ! Writing 92 model components to file: J1743+3747_S_2015_01_22_pus_map.mod wobs J1743+3747_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1743+3747_S_2015_01_22_pus_uvs.fits wwins J1743+3747_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J1743+3747_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000192549 Jy ! Component: 100 - total flux cleaned = 0.000252456 Jy ! Component: 150 - total flux cleaned = 0.000309335 Jy ! Component: 200 - total flux cleaned = 0.000388092 Jy ! Component: 250 - total flux cleaned = 0.000462218 Jy ! Component: 300 - total flux cleaned = 0.000485846 Jy ! Component: 350 - total flux cleaned = 0.000486129 Jy ! Component: 400 - total flux cleaned = 0.000486716 Jy ! Component: 450 - total flux cleaned = 0.000570321 Jy ! Component: 500 - total flux cleaned = 0.000630468 Jy ! Component: 550 - total flux cleaned = 0.000669216 Jy ! Component: 600 - total flux cleaned = 0.000707226 Jy ! Component: 650 - total flux cleaned = 0.000743995 Jy ! Component: 700 - total flux cleaned = 0.00086813 Jy ! Component: 750 - total flux cleaned = 0.000936426 Jy ! Component: 800 - total flux cleaned = 0.000953948 Jy ! Component: 850 - total flux cleaned = 0.00100389 Jy ! Component: 900 - total flux cleaned = 0.00105208 Jy ! Component: 950 - total flux cleaned = 0.00108317 Jy ! Component: 1000 - total flux cleaned = 0.00106812 Jy ! Component: 1050 - total flux cleaned = 0.00106848 Jy ! Component: 1100 - total flux cleaned = 0.00106891 Jy ! Component: 1150 - total flux cleaned = 0.00108346 Jy ! Component: 1200 - total flux cleaned = 0.00111113 Jy ! Component: 1250 - total flux cleaned = 0.00108416 Jy ! Component: 1300 - total flux cleaned = 0.0010976 Jy ! Component: 1350 - total flux cleaned = 0.00109801 Jy ! Component: 1400 - total flux cleaned = 0.00107263 Jy ! Component: 1450 - total flux cleaned = 0.00104786 Jy ! Component: 1500 - total flux cleaned = 0.00101151 Jy ! Component: 1550 - total flux cleaned = 0.000975499 Jy ! Component: 1600 - total flux cleaned = 0.000928266 Jy ! Component: 1650 - total flux cleaned = 0.000893342 Jy ! Component: 1700 - total flux cleaned = 0.000847434 Jy ! Component: 1750 - total flux cleaned = 0.00078016 Jy ! Component: 1800 - total flux cleaned = 0.00072498 Jy ! Component: 1850 - total flux cleaned = 0.000681489 Jy ! Component: 1900 - total flux cleaned = 0.000627758 Jy ! Component: 1950 - total flux cleaned = 0.000617084 Jy ! Component: 2000 - total flux cleaned = 0.00055398 Jy ! Component: 2050 - total flux cleaned = 0.000502193 Jy ! Component: 2100 - total flux cleaned = 0.000440816 Jy ! Component: 2150 - total flux cleaned = 0.000390285 Jy ! Component: 2200 - total flux cleaned = 0.000330338 Jy ! Component: 2250 - total flux cleaned = 0.00031061 Jy ! Component: 2300 - total flux cleaned = 0.000251907 Jy ! Component: 2350 - total flux cleaned = 0.000184172 Jy ! Component: 2400 - total flux cleaned = 0.000155432 Jy ! Component: 2450 - total flux cleaned = 9.84119e-05 Jy ! Component: 2500 - total flux cleaned = 3.2634e-05 Jy ! Component: 2550 - total flux cleaned = -2.32208e-05 Jy ! Component: 2600 - total flux cleaned = -6.93613e-05 Jy ! Component: 2650 - total flux cleaned = -9.68083e-05 Jy ! Component: 2700 - total flux cleaned = -0.00013323 Jy ! Component: 2750 - total flux cleaned = -0.000169235 Jy ! Component: 2800 - total flux cleaned = -0.000204901 Jy ! Component: 2850 - total flux cleaned = -0.000204875 Jy ! Component: 2900 - total flux cleaned = -0.000231261 Jy ! Component: 2950 - total flux cleaned = -0.00022249 Jy ! Component: 3000 - total flux cleaned = -0.000248505 Jy ! Component: 3050 - total flux cleaned = -0.000248537 Jy ! Component: 3100 - total flux cleaned = -0.000282806 Jy ! Component: 3150 - total flux cleaned = -0.000299878 Jy ! Component: 3200 - total flux cleaned = -0.000342271 Jy ! Component: 3250 - total flux cleaned = -0.000367546 Jy ! Component: 3300 - total flux cleaned = -0.000401023 Jy ! Component: 3350 - total flux cleaned = -0.00042604 Jy ! Component: 3400 - total flux cleaned = -0.000459296 Jy ! Component: 3450 - total flux cleaned = -0.000475869 Jy ! Component: 3500 - total flux cleaned = -0.000492324 Jy ! Component: 3550 - total flux cleaned = -0.00050874 Jy ! Component: 3600 - total flux cleaned = -0.000508755 Jy ! Component: 3650 - total flux cleaned = -0.000525092 Jy ! Component: 3700 - total flux cleaned = -0.000549546 Jy ! Component: 3750 - total flux cleaned = -0.000549571 Jy ! Component: 3800 - total flux cleaned = -0.000565855 Jy ! Component: 3850 - total flux cleaned = -0.000582055 Jy ! Component: 3900 - total flux cleaned = -0.000590122 Jy ! Component: 3950 - total flux cleaned = -0.000549732 Jy ! Component: 4000 - total flux cleaned = -0.000565877 Jy ! Component: 4050 - total flux cleaned = -0.000573949 Jy ! Total flux subtracted in 4096 components = -0.000582004 Jy ! Clean residual min=-0.000471 max=0.000533 Jy/beam ! Clean residual mean=-0.000002 rms=0.000139 Jy/beam ! Combined flux in latest and established models = 0.221343 Jy keep ! Adding 219 model components to the UV plane model. ! The established model now contains 311 components and 0.221343 Jy ![Exited script file: muppet] wmap "J1743+3747_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.249 x 9.693 at 28.66 degrees (North through East) ! Clean map min=-0.0009965 max=0.20579 Jy/beam ! Writing clean map to FITS file: J1743+3747_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.205795 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00013229 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.192847 0.192847 0.385695 0.771389 1.54278 3.08556 6.17112 12.3422 24.6845 49.3689 98.7378 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.205 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.249 x 9.693 at 28.66 degrees (North through East) ! Clean map min=-0.0009965 max=0.20579 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1743+3747_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 23:01:58 2017