! Started logfile: J1742-3341_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:59:36 2016
obs J1742-3341_S_2014_06_09_pus_uva.fits
! Reading UV FITS file: J1742-3341_S_2014_06_09_pus_uva.fits
! AN table 1: 121 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.176309 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1742-3341
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 336 lines of history.
! 
! Reading 3840 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1742-3341_S_2014_06_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 668 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 668 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 668 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 668 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.990133Jy  sigma=0.009551
! Fit after  self-cal, rms=0.938106Jy  sigma=0.009088
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=13.42 mas, bmaj=67.6 mas, bpa=8.712 degrees
! Estimated noise=1448.68 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0467675 Jy
! Component: 100  -  total flux cleaned = 0.0589355 Jy
! Total flux subtracted in 100 components = 0.0589355 Jy
! Clean residual min=-0.004968 max=0.005625 Jy/beam
! Clean residual mean=-0.000051 rms=0.002151 Jy/beam
! Combined flux in latest and established models = 0.0589355 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.0589355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074974Jy  sigma=0.000688
! Fit after  self-cal, rms=0.074261Jy  sigma=0.000681
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=15.13 mas, bmaj=68.58 mas, bpa=8.659 degrees
! Estimated noise=1194 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00891162 Jy
! Component: 100  -  total flux cleaned = 0.0107479 Jy
! Component: 150  -  total flux cleaned = 0.0131434 Jy
! Component: 200  -  total flux cleaned = 0.0139855 Jy
! Total flux subtracted in 200 components = 0.0139855 Jy
! Clean residual min=-0.001567 max=0.001567 Jy/beam
! Clean residual mean=-0.000025 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.072921 Jy
! Performing phase self-cal
! Adding 142 model components to the UV plane model.
! The established model now contains 170 components and 0.072921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072985Jy  sigma=0.000671
! Fit after  self-cal, rms=0.072879Jy  sigma=0.000670
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.97     HN        1.00*    KP        1.08     
!   LA        1.07     MK        1.00*    NL        1.00*    OV        1.06     
!   PT        0.91     SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.01     HN        1.00*    KP        1.07     
!   LA        1.05     MK        1.00*    NL        1.00*    OV        1.09     
!   PT        0.97     SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.11     HN        1.00*    KP        0.96     
!   LA        0.82     MK        1.00*    NL        1.00*    OV        1.05     
!   PT        0.97     SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.95     HN        1.00*    KP        0.91     
!   LA        0.84     MK        1.00*    NL        1.00*    OV        1.08     
!   PT        0.98     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.072879Jy  sigma=0.000670
! Fit after  self-cal, rms=0.069544Jy  sigma=0.000666
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=15.43 mas, bmaj=68.06 mas, bpa=8.624 degrees
! Estimated noise=1177.51 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000738596 Jy
! Component: 100  -  total flux cleaned = 0.00112243 Jy
! Component: 150  -  total flux cleaned = 0.00138873 Jy
! Component: 200  -  total flux cleaned = 0.00146741 Jy
! Total flux subtracted in 200 components = 0.00146741 Jy
! Clean residual min=-0.000589 max=0.000591 Jy/beam
! Clean residual mean=-0.000008 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.0743884 Jy
! Performing phase self-cal
! Adding 90 model components to the UV plane model.
! The established model now contains 260 components and 0.0743884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069469Jy  sigma=0.000665
! Fit after  self-cal, rms=0.069349Jy  sigma=0.000664
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069349Jy  sigma=0.000664
! Fit after  self-cal, rms=0.069340Jy  sigma=0.000664
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.46 mas, bmaj=68.23 mas, bpa=8.588 degrees
! Estimated noise=1176.57 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000336795 Jy
! Component: 100  -  total flux cleaned = -0.000124779 Jy
! Component: 150  -  total flux cleaned = -0.000154109 Jy
! Component: 200  -  total flux cleaned = -0.000155529 Jy
! Total flux subtracted in 200 components = -0.000155529 Jy
! Clean residual min=-0.000419 max=0.000418 Jy/beam
! Clean residual mean=-0.000001 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.0742329 Jy
selfcal
! Performing phase self-cal
! Adding 85 model components to the UV plane model.
! The established model now contains 344 components and 0.0742329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069292Jy  sigma=0.000663
! Fit after  self-cal, rms=0.069260Jy  sigma=0.000663
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.10656e-05 Jy
! Component: 100  -  total flux cleaned = -9.72081e-06 Jy
! Component: 150  -  total flux cleaned = -6.92001e-05 Jy
! Component: 200  -  total flux cleaned = -4.4309e-05 Jy
! Total flux subtracted in 200 components = -4.4309e-05 Jy
! Clean residual min=-0.000413 max=0.000411 Jy/beam
! Clean residual mean=-0.000005 rms=0.000182 Jy/beam
! Combined flux in latest and established models = 0.0741885 Jy
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 409 components and 0.0741886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069230Jy  sigma=0.000662
! Fit after  self-cal, rms=0.069174Jy  sigma=0.000662
! Inverting map 
! Added new window around map position (-44.5, 44).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000184089 Jy
! Component: 100  -  total flux cleaned = 0.000206054 Jy
! Component: 150  -  total flux cleaned = 0.000265095 Jy
! Component: 200  -  total flux cleaned = 0.000261994 Jy
! Total flux subtracted in 200 components = 0.000261994 Jy
! Clean residual min=-0.000518 max=0.000605 Jy/beam
! Clean residual mean=-0.000003 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.0744506 Jy
! Performing phase self-cal
! Adding 105 model components to the UV plane model.
! The established model now contains 508 components and 0.0744506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069156Jy  sigma=0.000662
! Fit after  self-cal, rms=0.069136Jy  sigma=0.000662
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069136Jy  sigma=0.000662
! Fit after  self-cal, rms=0.069190Jy  sigma=0.000662
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.45 mas, bmaj=68.21 mas, bpa=8.546 degrees
! Estimated noise=1176.94 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0001007 Jy
! Component: 100  -  total flux cleaned = 0.000117976 Jy
! Component: 150  -  total flux cleaned = 0.000147408 Jy
! Component: 200  -  total flux cleaned = 0.000159359 Jy
! Total flux subtracted in 200 components = 0.000159359 Jy
! Clean residual min=-0.000494 max=0.000613 Jy/beam
! Clean residual mean=0.000001 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.0746099 Jy
selfcal
! Performing phase self-cal
! Adding 126 model components to the UV plane model.
! The established model now contains 617 components and 0.0746099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069178Jy  sigma=0.000662
! Fit after  self-cal, rms=0.069165Jy  sigma=0.000662
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.31898e-05 Jy
! Component: 100  -  total flux cleaned = 0.000111498 Jy
! Component: 150  -  total flux cleaned = 0.000143335 Jy
! Component: 200  -  total flux cleaned = 0.000145329 Jy
! Total flux subtracted in 200 components = 0.000145329 Jy
! Clean residual min=-0.000549 max=0.000606 Jy/beam
! Clean residual mean=-0.000000 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.0747553 Jy
! Performing phase self-cal
! Adding 129 model components to the UV plane model.
! The established model now contains 736 components and 0.0747553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069154Jy  sigma=0.000662
! Fit after  self-cal, rms=0.069153Jy  sigma=0.000662
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069153Jy  sigma=0.000662
! Fit after  self-cal, rms=0.069253Jy  sigma=0.000662
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=16.2 mas, bmaj=67.64 mas, bpa=8.573 degrees
! Estimated noise=1177.91 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000204519 Jy
! Component: 100  -  total flux cleaned = 0.000266804 Jy
! Component: 150  -  total flux cleaned = 0.000228929 Jy
! Component: 200  -  total flux cleaned = 0.000196922 Jy
! Total flux subtracted in 200 components = 0.000196922 Jy
! Clean residual min=-0.000493 max=0.000560 Jy/beam
! Clean residual mean=-0.000000 rms=0.000179 Jy/beam
! Combined flux in latest and established models = 0.0749522 Jy
selfcal
! Performing phase self-cal
! Adding 101 model components to the UV plane model.
! The established model now contains 816 components and 0.0749522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069246Jy  sigma=0.000661
! Fit after  self-cal, rms=0.069243Jy  sigma=0.000661
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.59815e-05 Jy
! Component: 100  -  total flux cleaned = 8.88502e-05 Jy
! Component: 150  -  total flux cleaned = 7.81025e-05 Jy
! Component: 200  -  total flux cleaned = 5.98695e-05 Jy
! Total flux subtracted in 200 components = 5.98695e-05 Jy
! Clean residual min=-0.000520 max=0.000589 Jy/beam
! Clean residual mean=-0.000002 rms=0.000182 Jy/beam
! Combined flux in latest and established models = 0.075012 Jy
! Performing phase self-cal
! Adding 116 model components to the UV plane model.
! The established model now contains 917 components and 0.075012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069238Jy  sigma=0.000661
! Fit after  self-cal, rms=0.069231Jy  sigma=0.000661
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=15.46 mas, bmaj=68.12 mas, bpa=8.51 degrees
! Estimated noise=1178.21 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 15.46 x 68.12 at 8.51 degrees (North through East)
! Clean map  min=-0.0036365  max=0.060495 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.62 mas, bmaj=67.62 mas, bpa=8.71 degrees
! Estimated noise=1454.05 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0334604 Jy
! Component: 100  -  total flux cleaned = 0.0384159 Jy
! Component: 150  -  total flux cleaned = 0.0419671 Jy
! Component: 200  -  total flux cleaned = 0.0462844 Jy
! Total flux subtracted in 200 components = 0.0462844 Jy
! Clean residual min=-0.012759 max=0.025185 Jy/beam
! Clean residual mean=0.000018 rms=0.005635 Jy/beam
! Combined flux in latest and established models = 0.0462844 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 75 model components to the UV plane model.
! The established model now contains 75 components and 0.0462844 Jy
! Inverting map and beam 
! Estimated beam: bmin=15.46 mas, bmaj=68.12 mas, bpa=8.51 degrees
! Estimated noise=1178.21 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.5, -0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.02279 Jy
! Component: 100  -  total flux cleaned = 0.0246541 Jy
! Component: 150  -  total flux cleaned = 0.0255522 Jy
! Component: 200  -  total flux cleaned = 0.0271124 Jy
! Total flux subtracted in 200 components = 0.0271124 Jy
! Clean residual min=-0.005854 max=0.005576 Jy/beam
! Clean residual mean=0.000054 rms=0.002047 Jy/beam
! Combined flux in latest and established models = 0.0733968 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 152 components and 0.0733968 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=16.2 mas, bmaj=67.64 mas, bpa=8.573 degrees
! Estimated noise=1177.91 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110421 Jy
! Component: 100  -  total flux cleaned = 0.000962805 Jy
! Component: 150  -  total flux cleaned = 0.0006723 Jy
! Component: 200  -  total flux cleaned = 0.000302588 Jy
! Total flux subtracted in 200 components = 0.000302588 Jy
! Clean residual min=-0.004214 max=0.003869 Jy/beam
! Clean residual mean=0.000059 rms=0.001350 Jy/beam
! Combined flux in latest and established models = 0.0736994 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000221419 Jy
! Component: 100  -  total flux cleaned = -0.000522127 Jy
! Component: 150  -  total flux cleaned = -0.0007007 Jy
! Component: 200  -  total flux cleaned = -0.00102937 Jy
! Total flux subtracted in 200 components = -0.00102937 Jy
! Clean residual min=-0.003580 max=0.003076 Jy/beam
! Clean residual mean=0.000060 rms=0.001083 Jy/beam
! Combined flux in latest and established models = 0.07267 Jy
! Adding 144 model components to the UV plane model.
! The established model now contains 286 components and 0.07267 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=15.46 mas, bmaj=68.12 mas, bpa=8.51 degrees
! Estimated noise=1178.21 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000788153 Jy
! Component: 100  -  total flux cleaned = -0.0010379 Jy
! Component: 150  -  total flux cleaned = -0.0013222 Jy
! Component: 200  -  total flux cleaned = -0.00148237 Jy
! Total flux subtracted in 200 components = -0.00148237 Jy
! Clean residual min=-0.003043 max=0.002543 Jy/beam
! Clean residual mean=0.000055 rms=0.000868 Jy/beam
! Combined flux in latest and established models = 0.0711876 Jy
selfcal
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 350 components and 0.0711876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069572Jy  sigma=0.000665
! Fit after  self-cal, rms=0.069400Jy  sigma=0.000663
wmodel J1742-3341_S_2014_06_09_pus_map.mod
! Writing 350 model components to file: J1742-3341_S_2014_06_09_pus_map.mod
wobs J1742-3341_S_2014_06_09_pus_uvs.fits
! Writing UV FITS file: J1742-3341_S_2014_06_09_pus_uvs.fits
wwins J1742-3341_S_2014_06_09_pus_map.win
! wwins: Wrote 2 windows to J1742-3341_S_2014_06_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 6.15362e-06 Jy
! Component: 100  -  total flux cleaned = 0.000260861 Jy
! Component: 150  -  total flux cleaned = 0.00049568 Jy
! Component: 200  -  total flux cleaned = 0.000802025 Jy
! Component: 250  -  total flux cleaned = 0.00109947 Jy
! Component: 300  -  total flux cleaned = 0.00142 Jy
! Component: 350  -  total flux cleaned = 0.00170282 Jy
! Component: 400  -  total flux cleaned = 0.00191191 Jy
! Component: 450  -  total flux cleaned = 0.00209771 Jy
! Component: 500  -  total flux cleaned = 0.0022875 Jy
! Component: 550  -  total flux cleaned = 0.00245653 Jy
! Component: 600  -  total flux cleaned = 0.0026182 Jy
! Component: 650  -  total flux cleaned = 0.00277287 Jy
! Component: 700  -  total flux cleaned = 0.00292186 Jy
! Component: 750  -  total flux cleaned = 0.00301417 Jy
! Component: 800  -  total flux cleaned = 0.00309349 Jy
! Component: 850  -  total flux cleaned = 0.00317048 Jy
! Component: 900  -  total flux cleaned = 0.00325433 Jy
! Component: 950  -  total flux cleaned = 0.00331775 Jy
! Component: 1000  -  total flux cleaned = 0.00337954 Jy
! Component: 1050  -  total flux cleaned = 0.00343121 Jy
! Component: 1100  -  total flux cleaned = 0.00349016 Jy
! Component: 1150  -  total flux cleaned = 0.00353964 Jy
! Component: 1200  -  total flux cleaned = 0.00360424 Jy
! Component: 1250  -  total flux cleaned = 0.00365968 Jy
! Component: 1300  -  total flux cleaned = 0.00369857 Jy
! Component: 1350  -  total flux cleaned = 0.0037597 Jy
! Component: 1400  -  total flux cleaned = 0.00381955 Jy
! Component: 1450  -  total flux cleaned = 0.00384897 Jy
! Component: 1500  -  total flux cleaned = 0.00387805 Jy
! Component: 1550  -  total flux cleaned = 0.00390671 Jy
! Component: 1600  -  total flux cleaned = 0.00394898 Jy
! Component: 1650  -  total flux cleaned = 0.00397675 Jy
! Component: 1700  -  total flux cleaned = 0.00402464 Jy
! Component: 1750  -  total flux cleaned = 0.00404487 Jy
! Component: 1800  -  total flux cleaned = 0.00406486 Jy
! Component: 1850  -  total flux cleaned = 0.00409777 Jy
! Component: 1900  -  total flux cleaned = 0.00411723 Jy
! Component: 1950  -  total flux cleaned = 0.00413658 Jy
! Component: 2000  -  total flux cleaned = 0.00416205 Jy
! Component: 2050  -  total flux cleaned = 0.0041873 Jy
! Component: 2100  -  total flux cleaned = 0.00422486 Jy
! Component: 2150  -  total flux cleaned = 0.00428727 Jy
! Component: 2200  -  total flux cleaned = 0.00435572 Jy
! Component: 2250  -  total flux cleaned = 0.00442396 Jy
! Component: 2300  -  total flux cleaned = 0.00448584 Jy
! Component: 2350  -  total flux cleaned = 0.00454762 Jy
! Component: 2400  -  total flux cleaned = 0.00461549 Jy
! Component: 2450  -  total flux cleaned = 0.00466485 Jy
! Component: 2500  -  total flux cleaned = 0.00475117 Jy
! Component: 2550  -  total flux cleaned = 0.00482524 Jy
! Component: 2600  -  total flux cleaned = 0.00489964 Jy
! Component: 2650  -  total flux cleaned = 0.00498679 Jy
! Component: 2700  -  total flux cleaned = 0.00505546 Jy
! Component: 2750  -  total flux cleaned = 0.00513691 Jy
! Component: 2800  -  total flux cleaned = 0.00522507 Jy
! Component: 2850  -  total flux cleaned = 0.00530103 Jy
! Component: 2900  -  total flux cleaned = 0.00536461 Jy
! Component: 2950  -  total flux cleaned = 0.00542851 Jy
! Component: 3000  -  total flux cleaned = 0.00548637 Jy
! Component: 3050  -  total flux cleaned = 0.00555748 Jy
! Component: 3100  -  total flux cleaned = 0.0056095 Jy
! Component: 3150  -  total flux cleaned = 0.005675 Jy
! Component: 3200  -  total flux cleaned = 0.00571458 Jy
! Component: 3250  -  total flux cleaned = 0.0057678 Jy
! Component: 3300  -  total flux cleaned = 0.00579462 Jy
! Component: 3350  -  total flux cleaned = 0.00584859 Jy
! Component: 3400  -  total flux cleaned = 0.0058826 Jy
! Component: 3450  -  total flux cleaned = 0.00591697 Jy
! Component: 3500  -  total flux cleaned = 0.00595167 Jy
! Component: 3550  -  total flux cleaned = 0.00596576 Jy
! Component: 3600  -  total flux cleaned = 0.00600111 Jy
! Component: 3650  -  total flux cleaned = 0.00601545 Jy
! Component: 3700  -  total flux cleaned = 0.0060443 Jy
! Component: 3750  -  total flux cleaned = 0.00608787 Jy
! Component: 3800  -  total flux cleaned = 0.0061026 Jy
! Component: 3850  -  total flux cleaned = 0.00614721 Jy
! Component: 3900  -  total flux cleaned = 0.00614727 Jy
! Component: 3950  -  total flux cleaned = 0.00617747 Jy
! Component: 4000  -  total flux cleaned = 0.00620049 Jy
! Component: 4050  -  total flux cleaned = 0.00623141 Jy
! Total flux subtracted in 4096 components = 0.00624701 Jy
! Clean residual min=-0.000475 max=0.000466 Jy/beam
! Clean residual mean=0.000004 rms=0.000172 Jy/beam
! Combined flux in latest and established models = 0.0774346 Jy
keep
! Adding 543 model components to the UV plane model.
! The established model now contains 893 components and 0.0774347 Jy
![Exited script file: muppet]
wmap "J1742-3341_S_2014_06_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 15.46 x 68.12 at 8.51 degrees (North through East)
! Clean map  min=-0.013253  max=0.037588 Jy/beam
! Writing clean map to FITS file: J1742-3341_S_2014_06_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0375883 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000190663 
device "J1742-3341_S_2014_06_09_pus\_map.eps/VPS"
! Attempting to open device: 'J1742-3341_S_2014_06_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.52172 1.52172 3.04344 6.08688 12.1738 24.3475 48.695 97.39
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.037 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 15.46 x 68.12 at 8.51 degrees (North through East)
! Clean map  min=-0.013253  max=0.037588 Jy/beam
quit
! Quitting program
! Log file J1742-3341_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:59:48 2016