! Started logfile: J1739+4955_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:31:29 2017 obs J1739+4955_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1739+4955_S_2015_01_23_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.72 visibilities/baseline/integration-bin. ! Found source: J1739+4955 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 1944 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1739+4955_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.812436Jy sigma=0.010587 ! Fit after self-cal, rms=0.809968Jy sigma=0.010557 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.528 mas, bmaj=8.954 mas, bpa=19.43 degrees ! Estimated noise=1654.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.141985 Jy ! Component: 100 - total flux cleaned = 0.176481 Jy ! Total flux subtracted in 100 components = 0.176481 Jy ! Clean residual min=-0.009073 max=0.014298 Jy/beam ! Clean residual mean=0.000003 rms=0.002580 Jy/beam ! Combined flux in latest and established models = 0.176481 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.176481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074950Jy sigma=0.000906 ! Fit after self-cal, rms=0.074952Jy sigma=0.000906 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=9.292 mas, bpa=18.45 degrees ! Estimated noise=1247.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215039 Jy ! Component: 100 - total flux cleaned = 0.0324989 Jy ! Component: 150 - total flux cleaned = 0.0400321 Jy ! Component: 200 - total flux cleaned = 0.045517 Jy ! Total flux subtracted in 200 components = 0.045517 Jy ! Clean residual min=-0.008531 max=0.008219 Jy/beam ! Clean residual mean=-0.000002 rms=0.002128 Jy/beam ! Combined flux in latest and established models = 0.221998 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 42 components and 0.221998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067709Jy sigma=0.000826 ! Fit after self-cal, rms=0.067723Jy sigma=0.000825 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.96 KP 1.10 ! LA 0.91 MK 0.98 NL 0.98 OV 1.01 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 1.09 KP 0.99 ! LA 0.91 MK 0.98 NL 1.15 OV 1.06 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.07 KP 0.91 ! LA 0.77 MK 0.99 NL 1.15 OV 0.96 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* HN 1.01 KP 0.79 ! LA 0.81 MK 1.03 NL 1.08 OV 0.98 ! PT 1.02 SC 1.01 ! ! ! Fit before self-cal, rms=0.067723Jy sigma=0.000825 ! Fit after self-cal, rms=0.060544Jy sigma=0.000764 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=9.382 mas, bpa=18.41 degrees ! Estimated noise=1234.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326099 Jy ! Component: 100 - total flux cleaned = 0.000252325 Jy ! Component: 150 - total flux cleaned = 0.000146968 Jy ! Component: 200 - total flux cleaned = 8.48703e-05 Jy ! Total flux subtracted in 200 components = 8.48703e-05 Jy ! Clean residual min=-0.003525 max=0.004157 Jy/beam ! Clean residual mean=-0.000003 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.222083 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.222083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060489Jy sigma=0.000764 ! Fit after self-cal, rms=0.060486Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060486Jy sigma=0.000763 ! Fit after self-cal, rms=0.060432Jy sigma=0.000763 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=9.383 mas, bpa=18.47 degrees ! Estimated noise=1234.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.68855e-05 Jy ! Component: 100 - total flux cleaned = -1.32472e-05 Jy ! Component: 150 - total flux cleaned = -6.44262e-05 Jy ! Component: 200 - total flux cleaned = -0.000110513 Jy ! Total flux subtracted in 200 components = -0.000110513 Jy ! Clean residual min=-0.003423 max=0.004193 Jy/beam ! Clean residual mean=-0.000003 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.221973 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.221973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060406Jy sigma=0.000763 ! Fit after self-cal, rms=0.060405Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-102.5, -39.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212695 Jy ! Component: 100 - total flux cleaned = 0.00226592 Jy ! Component: 150 - total flux cleaned = 0.00202775 Jy ! Component: 200 - total flux cleaned = 0.00187821 Jy ! Total flux subtracted in 200 components = 0.00187821 Jy ! Clean residual min=-0.003062 max=0.002973 Jy/beam ! Clean residual mean=-0.000002 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.223851 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 80 components and 0.223851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060123Jy sigma=0.000760 ! Fit after self-cal, rms=0.060121Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060121Jy sigma=0.000760 ! Fit after self-cal, rms=0.060073Jy sigma=0.000759 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.988 mas, bmaj=9.384 mas, bpa=18.5 degrees ! Estimated noise=1233.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.77405e-05 Jy ! Component: 100 - total flux cleaned = 0.000213982 Jy ! Component: 150 - total flux cleaned = 0.00032337 Jy ! Component: 200 - total flux cleaned = 0.000392742 Jy ! Total flux subtracted in 200 components = 0.000392742 Jy ! Clean residual min=-0.003095 max=0.002966 Jy/beam ! Clean residual mean=-0.000002 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.224244 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 95 components and 0.224244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060022Jy sigma=0.000759 ! Fit after self-cal, rms=0.060022Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101257 Jy ! Component: 100 - total flux cleaned = 0.000195385 Jy ! Component: 150 - total flux cleaned = 0.000196785 Jy ! Component: 200 - total flux cleaned = 0.000252997 Jy ! Total flux subtracted in 200 components = 0.000252997 Jy ! Clean residual min=-0.003103 max=0.002921 Jy/beam ! Clean residual mean=-0.000001 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.224497 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 103 components and 0.224497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059994Jy sigma=0.000759 ! Fit after self-cal, rms=0.059995Jy sigma=0.000759 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059995Jy sigma=0.000759 ! Fit after self-cal, rms=0.059937Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.759 mas, bmaj=10.47 mas, bpa=14.38 degrees ! Estimated noise=1548.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000988489 Jy ! Component: 100 - total flux cleaned = 0.00141623 Jy ! Component: 150 - total flux cleaned = 0.00171495 Jy ! Component: 200 - total flux cleaned = 0.00184268 Jy ! Total flux subtracted in 200 components = 0.00184268 Jy ! Clean residual min=-0.003425 max=0.002888 Jy/beam ! Clean residual mean=-0.000001 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.226339 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 112 components and 0.226339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059939Jy sigma=0.000758 ! Fit after self-cal, rms=0.059938Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017882 Jy ! Component: 100 - total flux cleaned = 0.00022907 Jy ! Component: 150 - total flux cleaned = 0.000260588 Jy ! Component: 200 - total flux cleaned = 0.000260905 Jy ! Total flux subtracted in 200 components = 0.000260905 Jy ! Clean residual min=-0.003372 max=0.002840 Jy/beam ! Clean residual mean=-0.000001 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.2266 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 120 components and 0.2266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059938Jy sigma=0.000758 ! Fit after self-cal, rms=0.059938Jy sigma=0.000758 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.986 mas, bmaj=9.382 mas, bpa=18.51 degrees ! Estimated noise=1233.2 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.986 x 9.382 at 18.51 degrees (North through East) ! Clean map min=-0.0029633 max=0.18876 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.536 mas, bmaj=9.021 mas, bpa=19.48 degrees ! Estimated noise=1653.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.141778 Jy ! Component: 100 - total flux cleaned = 0.17606 Jy ! Component: 150 - total flux cleaned = 0.191312 Jy ! Component: 200 - total flux cleaned = 0.1994 Jy ! Total flux subtracted in 200 components = 0.1994 Jy ! Clean residual min=-0.005467 max=0.005672 Jy/beam ! Clean residual mean=-0.000001 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.1994 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.1994 Jy ! Inverting map and beam ! Estimated beam: bmin=2.986 mas, bmaj=9.382 mas, bpa=18.51 degrees ! Estimated noise=1233.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.5, 32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00766495 Jy ! Component: 100 - total flux cleaned = 0.0122246 Jy ! Component: 150 - total flux cleaned = 0.0149205 Jy ! Component: 200 - total flux cleaned = 0.0171662 Jy ! Total flux subtracted in 200 components = 0.0171662 Jy ! Clean residual min=-0.003474 max=0.003322 Jy/beam ! Clean residual mean=0.000000 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.216566 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 74 components and 0.216566 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.759 mas, bmaj=10.47 mas, bpa=14.38 degrees ! Estimated noise=1548.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00446597 Jy ! Component: 100 - total flux cleaned = 0.00709469 Jy ! Component: 150 - total flux cleaned = 0.00835605 Jy ! Component: 200 - total flux cleaned = 0.009351 Jy ! Total flux subtracted in 200 components = 0.009351 Jy ! Clean residual min=-0.003234 max=0.002687 Jy/beam ! Clean residual mean=-0.000002 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.225917 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000761401 Jy ! Component: 100 - total flux cleaned = 0.00135745 Jy ! Component: 150 - total flux cleaned = 0.00168593 Jy ! Component: 200 - total flux cleaned = 0.00180583 Jy ! Total flux subtracted in 200 components = 0.00180583 Jy ! Clean residual min=-0.003046 max=0.002794 Jy/beam ! Clean residual mean=-0.000003 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.227723 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 138 components and 0.227723 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.986 mas, bmaj=9.382 mas, bpa=18.51 degrees ! Estimated noise=1233.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000246915 Jy ! Component: 100 - total flux cleaned = -0.000196248 Jy ! Component: 150 - total flux cleaned = -0.000199369 Jy ! Component: 200 - total flux cleaned = -0.000199594 Jy ! Total flux subtracted in 200 components = -0.000199594 Jy ! Clean residual min=-0.002844 max=0.003008 Jy/beam ! Clean residual mean=-0.000002 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.227523 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 165 components and 0.227523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059902Jy sigma=0.000758 ! Fit after self-cal, rms=0.059878Jy sigma=0.000758 wmodel J1739+4955_S_2015_01_23_pus_map.mod ! Writing 165 model components to file: J1739+4955_S_2015_01_23_pus_map.mod wobs J1739+4955_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1739+4955_S_2015_01_23_pus_uvs.fits wwins J1739+4955_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J1739+4955_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000228547 Jy ! Component: 100 - total flux cleaned = -0.000879217 Jy ! Component: 150 - total flux cleaned = -0.00130557 Jy ! Component: 200 - total flux cleaned = -0.0015066 Jy ! Component: 250 - total flux cleaned = -0.00150778 Jy ! Component: 300 - total flux cleaned = -0.00150779 Jy ! Component: 350 - total flux cleaned = -0.00133163 Jy ! Component: 400 - total flux cleaned = -0.00126365 Jy ! Component: 450 - total flux cleaned = -0.00126272 Jy ! Component: 500 - total flux cleaned = -0.00116545 Jy ! Component: 550 - total flux cleaned = -0.00119688 Jy ! Component: 600 - total flux cleaned = -0.00119636 Jy ! Component: 650 - total flux cleaned = -0.00113628 Jy ! Component: 700 - total flux cleaned = -0.00099 Jy ! Component: 750 - total flux cleaned = -0.000961133 Jy ! Component: 800 - total flux cleaned = -0.000820321 Jy ! Component: 850 - total flux cleaned = -0.000875788 Jy ! Component: 900 - total flux cleaned = -0.000875568 Jy ! Component: 950 - total flux cleaned = -0.000875365 Jy ! Component: 1000 - total flux cleaned = -0.000953836 Jy ! Component: 1050 - total flux cleaned = -0.00108303 Jy ! Component: 1100 - total flux cleaned = -0.00108313 Jy ! Component: 1150 - total flux cleaned = -0.00105788 Jy ! Component: 1200 - total flux cleaned = -0.00105765 Jy ! Component: 1250 - total flux cleaned = -0.00100905 Jy ! Component: 1300 - total flux cleaned = -0.0010328 Jy ! Component: 1350 - total flux cleaned = -0.00086728 Jy ! Component: 1400 - total flux cleaned = -0.000868012 Jy ! Component: 1450 - total flux cleaned = -0.000891134 Jy ! Component: 1500 - total flux cleaned = -0.000913379 Jy ! Component: 1550 - total flux cleaned = -0.00086864 Jy ! Component: 1600 - total flux cleaned = -0.000868323 Jy ! Component: 1650 - total flux cleaned = -0.000802685 Jy ! Component: 1700 - total flux cleaned = -0.000781048 Jy ! Component: 1750 - total flux cleaned = -0.000802778 Jy ! Component: 1800 - total flux cleaned = -0.000865919 Jy ! Component: 1850 - total flux cleaned = -0.000803404 Jy ! Component: 1900 - total flux cleaned = -0.000782997 Jy ! Component: 1950 - total flux cleaned = -0.00080338 Jy ! Component: 2000 - total flux cleaned = -0.000742915 Jy ! Component: 2050 - total flux cleaned = -0.000723109 Jy ! Component: 2100 - total flux cleaned = -0.000684215 Jy ! Component: 2150 - total flux cleaned = -0.000723428 Jy ! Component: 2200 - total flux cleaned = -0.000742765 Jy ! Component: 2250 - total flux cleaned = -0.000742793 Jy ! Component: 2300 - total flux cleaned = -0.000723949 Jy ! Component: 2350 - total flux cleaned = -0.000686509 Jy ! Component: 2400 - total flux cleaned = -0.000741929 Jy ! Component: 2450 - total flux cleaned = -0.00068702 Jy ! Component: 2500 - total flux cleaned = -0.000741318 Jy ! Component: 2550 - total flux cleaned = -0.000759273 Jy ! Component: 2600 - total flux cleaned = -0.00077718 Jy ! Component: 2650 - total flux cleaned = -0.000759707 Jy ! Component: 2700 - total flux cleaned = -0.00084791 Jy ! Component: 2750 - total flux cleaned = -0.000917795 Jy ! Component: 2800 - total flux cleaned = -0.000900188 Jy ! Component: 2850 - total flux cleaned = -0.00098639 Jy ! Component: 2900 - total flux cleaned = -0.00100335 Jy ! Component: 2950 - total flux cleaned = -0.00100335 Jy ! Component: 3000 - total flux cleaned = -0.00102039 Jy ! Component: 3050 - total flux cleaned = -0.00108792 Jy ! Component: 3100 - total flux cleaned = -0.00115497 Jy ! Component: 3150 - total flux cleaned = -0.0011383 Jy ! Component: 3200 - total flux cleaned = -0.0011549 Jy ! Component: 3250 - total flux cleaned = -0.00117138 Jy ! Component: 3300 - total flux cleaned = -0.00120433 Jy ! Component: 3350 - total flux cleaned = -0.00118805 Jy ! Component: 3400 - total flux cleaned = -0.00123696 Jy ! Component: 3450 - total flux cleaned = -0.00126944 Jy ! Component: 3500 - total flux cleaned = -0.00126942 Jy ! Component: 3550 - total flux cleaned = -0.00130181 Jy ! Component: 3600 - total flux cleaned = -0.00131787 Jy ! Component: 3650 - total flux cleaned = -0.00130183 Jy ! Component: 3700 - total flux cleaned = -0.00136563 Jy ! Component: 3750 - total flux cleaned = -0.00138142 Jy ! Component: 3800 - total flux cleaned = -0.00141307 Jy ! Component: 3850 - total flux cleaned = -0.00141305 Jy ! Component: 3900 - total flux cleaned = -0.00141307 Jy ! Component: 3950 - total flux cleaned = -0.00142885 Jy ! Component: 4000 - total flux cleaned = -0.00142897 Jy ! Component: 4050 - total flux cleaned = -0.0014759 Jy ! Total flux subtracted in 4096 components = -0.00147588 Jy ! Clean residual min=-0.001105 max=0.001078 Jy/beam ! Clean residual mean=-0.000002 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.226047 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 405 components and 0.226047 Jy ![Exited script file: muppet] wmap "J1739+4955_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.986 x 9.382 at 18.51 degrees (North through East) ! Clean map min=-0.0021404 max=0.18826 Jy/beam ! Writing clean map to FITS file: J1739+4955_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.188264 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000247355 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.394163 0.394163 0.788326 1.57665 3.1533 6.30661 12.6132 25.2264 50.4528 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.188 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.986 x 9.382 at 18.51 degrees (North through East) ! Clean map min=-0.0021404 max=0.18826 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1739+4955_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:31:34 2017