! Started logfile: J1739+3358_S_2015_01_22_pus_uvs.log on Tue Jan 3 23:01:40 2017 obs J1739+3358_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1739+3358_S_2015_01_22_pus_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1739+3358 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 3360 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1739+3358_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.878377Jy sigma=0.011357 ! Fit after self-cal, rms=0.874225Jy sigma=0.011305 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.596 mas, bmaj=8.35 mas, bpa=19.87 degrees ! Estimated noise=1315.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0968149 Jy ! Component: 100 - total flux cleaned = 0.118657 Jy ! Total flux subtracted in 100 components = 0.118657 Jy ! Clean residual min=-0.007366 max=0.007794 Jy/beam ! Clean residual mean=0.000002 rms=0.001842 Jy/beam ! Combined flux in latest and established models = 0.118657 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.118657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068848Jy sigma=0.000828 ! Fit after self-cal, rms=0.068845Jy sigma=0.000828 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.016 mas, bmaj=9.306 mas, bpa=17 degrees ! Estimated noise=959.345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00942951 Jy ! Component: 100 - total flux cleaned = 0.0138105 Jy ! Component: 150 - total flux cleaned = 0.0162 Jy ! Component: 200 - total flux cleaned = 0.0169378 Jy ! Total flux subtracted in 200 components = 0.0169378 Jy ! Clean residual min=-0.006825 max=0.008276 Jy/beam ! Clean residual mean=0.000005 rms=0.002097 Jy/beam ! Combined flux in latest and established models = 0.135594 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 25 components and 0.135594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067348Jy sigma=0.000816 ! Fit after self-cal, rms=0.067368Jy sigma=0.000816 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.97 KP 1.11 ! LA 1.04 MK 0.98 NL 0.98 OV 0.90 ! PT 1.06 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.99 KP 1.01 ! LA 0.97 MK 1.05 NL 1.12 OV 0.98 ! PT 1.06 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.03 KP 0.91 ! LA 0.78 MK 1.04 NL 1.29 OV 0.91 ! PT 0.98 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.95 KP 0.82 ! LA 0.87 MK 1.05 NL 1.06 OV 0.98 ! PT 1.10 SC 0.94 ! ! ! Fit before self-cal, rms=0.067368Jy sigma=0.000816 ! Fit after self-cal, rms=0.063800Jy sigma=0.000790 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=9.339 mas, bpa=17.03 degrees ! Estimated noise=956.293 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000290195 Jy ! Component: 100 - total flux cleaned = -0.000327429 Jy ! Component: 150 - total flux cleaned = -0.000358243 Jy ! Component: 200 - total flux cleaned = -0.000436738 Jy ! Total flux subtracted in 200 components = -0.000436738 Jy ! Clean residual min=-0.004293 max=0.007965 Jy/beam ! Clean residual mean=0.000001 rms=0.001660 Jy/beam ! Combined flux in latest and established models = 0.135158 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.135158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063757Jy sigma=0.000789 ! Fit after self-cal, rms=0.063748Jy sigma=0.000789 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063748Jy sigma=0.000789 ! Fit after self-cal, rms=0.063851Jy sigma=0.000789 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=9.351 mas, bpa=17.09 degrees ! Estimated noise=957.733 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177097 Jy ! Component: 100 - total flux cleaned = -0.000230559 Jy ! Component: 150 - total flux cleaned = -0.000255079 Jy ! Component: 200 - total flux cleaned = -0.000316283 Jy ! Total flux subtracted in 200 components = -0.000316283 Jy ! Clean residual min=-0.004315 max=0.007846 Jy/beam ! Clean residual mean=0.000001 rms=0.001652 Jy/beam ! Combined flux in latest and established models = 0.134841 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.134841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063827Jy sigma=0.000788 ! Fit after self-cal, rms=0.063832Jy sigma=0.000788 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-25, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00756472 Jy ! Component: 100 - total flux cleaned = 0.012007 Jy ! Component: 150 - total flux cleaned = 0.0149964 Jy ! Component: 200 - total flux cleaned = 0.0171435 Jy ! Total flux subtracted in 200 components = 0.0171435 Jy ! Clean residual min=-0.002738 max=0.003187 Jy/beam ! Clean residual mean=0.000002 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.151985 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 80 components and 0.151985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062923Jy sigma=0.000774 ! Fit after self-cal, rms=0.062890Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062890Jy sigma=0.000774 ! Fit after self-cal, rms=0.062550Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=9.391 mas, bpa=17.07 degrees ! Estimated noise=948.277 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222825 Jy ! Component: 100 - total flux cleaned = 0.00365336 Jy ! Component: 150 - total flux cleaned = 0.00434829 Jy ! Component: 200 - total flux cleaned = 0.00441587 Jy ! Total flux subtracted in 200 components = 0.00441587 Jy ! Clean residual min=-0.002593 max=0.002646 Jy/beam ! Clean residual mean=0.000000 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.156401 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 119 components and 0.156401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062464Jy sigma=0.000772 ! Fit after self-cal, rms=0.062470Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167529 Jy ! Component: 100 - total flux cleaned = 0.000403686 Jy ! Component: 150 - total flux cleaned = 0.000646439 Jy ! Component: 200 - total flux cleaned = 0.000844623 Jy ! Total flux subtracted in 200 components = 0.000844623 Jy ! Clean residual min=-0.002571 max=0.002537 Jy/beam ! Clean residual mean=0.000000 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.157245 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 137 components and 0.157245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062449Jy sigma=0.000772 ! Fit after self-cal, rms=0.062447Jy sigma=0.000771 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062447Jy sigma=0.000771 ! Fit after self-cal, rms=0.062498Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.207 mas, bmaj=14.44 mas, bpa=6.38 degrees ! Estimated noise=1215.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000345373 Jy ! Component: 100 - total flux cleaned = 0.000626135 Jy ! Component: 150 - total flux cleaned = 0.000705203 Jy ! Component: 200 - total flux cleaned = 0.000751881 Jy ! Total flux subtracted in 200 components = 0.000751881 Jy ! Clean residual min=-0.002291 max=0.003360 Jy/beam ! Clean residual mean=-0.000002 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.157997 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 158 components and 0.157997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062498Jy sigma=0.000771 ! Fit after self-cal, rms=0.062502Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120635 Jy ! Component: 100 - total flux cleaned = -3.75896e-05 Jy ! Component: 150 - total flux cleaned = 3.80856e-05 Jy ! Component: 200 - total flux cleaned = 5.5569e-05 Jy ! Total flux subtracted in 200 components = 5.5569e-05 Jy ! Clean residual min=-0.002189 max=0.003205 Jy/beam ! Clean residual mean=-0.000002 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.158053 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 170 components and 0.158053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062500Jy sigma=0.000771 ! Fit after self-cal, rms=0.062499Jy sigma=0.000771 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=9.397 mas, bpa=17.03 degrees ! Estimated noise=946.953 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.05 x 9.397 at 17.03 degrees (North through East) ! Clean map min=-0.0022222 max=0.12659 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.614 mas, bmaj=8.388 mas, bpa=19.88 degrees ! Estimated noise=1307.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0960835 Jy ! Component: 100 - total flux cleaned = 0.117643 Jy ! Component: 150 - total flux cleaned = 0.125749 Jy ! Component: 200 - total flux cleaned = 0.131048 Jy ! Total flux subtracted in 200 components = 0.131048 Jy ! Clean residual min=-0.004053 max=0.005342 Jy/beam ! Clean residual mean=-0.000002 rms=0.001180 Jy/beam ! Combined flux in latest and established models = 0.131048 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.131048 Jy ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=9.397 mas, bpa=17.03 degrees ! Estimated noise=946.953 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-66, 92). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0068591 Jy ! Component: 100 - total flux cleaned = 0.0112761 Jy ! Component: 150 - total flux cleaned = 0.0145812 Jy ! Component: 200 - total flux cleaned = 0.0171921 Jy ! Total flux subtracted in 200 components = 0.0171921 Jy ! Clean residual min=-0.002727 max=0.003124 Jy/beam ! Clean residual mean=0.000001 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.14824 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 52 components and 0.14824 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.207 mas, bmaj=14.44 mas, bpa=6.38 degrees ! Estimated noise=1215.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035418 Jy ! Component: 100 - total flux cleaned = 0.00587538 Jy ! Component: 150 - total flux cleaned = 0.00749704 Jy ! Component: 200 - total flux cleaned = 0.00812644 Jy ! Total flux subtracted in 200 components = 0.00812644 Jy ! Clean residual min=-0.002870 max=0.003888 Jy/beam ! Clean residual mean=0.000002 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.156367 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000347749 Jy ! Component: 100 - total flux cleaned = 0.000610939 Jy ! Component: 150 - total flux cleaned = 0.000845243 Jy ! Component: 200 - total flux cleaned = 0.00101894 Jy ! Total flux subtracted in 200 components = 0.00101894 Jy ! Clean residual min=-0.002552 max=0.003523 Jy/beam ! Clean residual mean=0.000001 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.157386 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 115 components and 0.157386 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=9.397 mas, bpa=17.03 degrees ! Estimated noise=946.953 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000166901 Jy ! Component: 100 - total flux cleaned = -0.000158283 Jy ! Component: 150 - total flux cleaned = -0.000317987 Jy ! Component: 200 - total flux cleaned = -0.000352268 Jy ! Total flux subtracted in 200 components = -0.000352268 Jy ! Clean residual min=-0.002472 max=0.002456 Jy/beam ! Clean residual mean=-0.000000 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.157033 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 140 components and 0.157033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062491Jy sigma=0.000771 ! Fit after self-cal, rms=0.062474Jy sigma=0.000771 wmodel J1739+3358_S_2015_01_22_pus_map.mod ! Writing 140 model components to file: J1739+3358_S_2015_01_22_pus_map.mod wobs J1739+3358_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1739+3358_S_2015_01_22_pus_uvs.fits wwins J1739+3358_S_2015_01_22_pus_map.win ! wwins: Wrote 3 windows to J1739+3358_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000194956 Jy ! Component: 100 - total flux cleaned = -0.000188623 Jy ! Component: 150 - total flux cleaned = -0.000364322 Jy ! Component: 200 - total flux cleaned = -0.000396449 Jy ! Component: 250 - total flux cleaned = -0.000395562 Jy ! Component: 300 - total flux cleaned = -0.000305768 Jy ! Component: 350 - total flux cleaned = -0.000220254 Jy ! Component: 400 - total flux cleaned = -0.000137538 Jy ! Component: 450 - total flux cleaned = -5.84281e-05 Jy ! Component: 500 - total flux cleaned = -5.91724e-05 Jy ! Component: 550 - total flux cleaned = -8.43187e-05 Jy ! Component: 600 - total flux cleaned = -6.12051e-05 Jy ! Component: 650 - total flux cleaned = -8.47248e-05 Jy ! Component: 700 - total flux cleaned = -3.9946e-05 Jy ! Component: 750 - total flux cleaned = -6.18828e-05 Jy ! Component: 800 - total flux cleaned = -6.14497e-05 Jy ! Component: 850 - total flux cleaned = -8.21825e-05 Jy ! Component: 900 - total flux cleaned = -0.000122736 Jy ! Component: 950 - total flux cleaned = -0.000142614 Jy ! Component: 1000 - total flux cleaned = -0.000161737 Jy ! Component: 1050 - total flux cleaned = -0.000162094 Jy ! Component: 1100 - total flux cleaned = -0.000199088 Jy ! Component: 1150 - total flux cleaned = -0.000199503 Jy ! Component: 1200 - total flux cleaned = -0.000217727 Jy ! Component: 1250 - total flux cleaned = -0.000269032 Jy ! Component: 1300 - total flux cleaned = -0.000269042 Jy ! Component: 1350 - total flux cleaned = -0.000252557 Jy ! Component: 1400 - total flux cleaned = -0.000220434 Jy ! Component: 1450 - total flux cleaned = -0.000173545 Jy ! Component: 1500 - total flux cleaned = -0.000173861 Jy ! Component: 1550 - total flux cleaned = -0.000158793 Jy ! Component: 1600 - total flux cleaned = -0.000158504 Jy ! Component: 1650 - total flux cleaned = -0.000114796 Jy ! Component: 1700 - total flux cleaned = -0.000128911 Jy ! Component: 1750 - total flux cleaned = -0.000114852 Jy ! Component: 1800 - total flux cleaned = -0.000101277 Jy ! Component: 1850 - total flux cleaned = -0.000101426 Jy ! Component: 1900 - total flux cleaned = -7.4698e-05 Jy ! Component: 1950 - total flux cleaned = -3.56139e-05 Jy ! Component: 2000 - total flux cleaned = -6.1119e-05 Jy ! Component: 2050 - total flux cleaned = -2.31513e-05 Jy ! Component: 2100 - total flux cleaned = -2.3058e-05 Jy ! Component: 2150 - total flux cleaned = 1.36021e-05 Jy ! Component: 2200 - total flux cleaned = 1.37783e-06 Jy ! Component: 2250 - total flux cleaned = -1.06069e-05 Jy ! Component: 2300 - total flux cleaned = -5.7752e-05 Jy ! Component: 2350 - total flux cleaned = -8.10375e-05 Jy ! Component: 2400 - total flux cleaned = -8.11305e-05 Jy ! Component: 2450 - total flux cleaned = -8.12115e-05 Jy ! Component: 2500 - total flux cleaned = -9.25966e-05 Jy ! Component: 2550 - total flux cleaned = -0.00010383 Jy ! Component: 2600 - total flux cleaned = -0.000114935 Jy ! Component: 2650 - total flux cleaned = -0.000147918 Jy ! Component: 2700 - total flux cleaned = -0.000169731 Jy ! Component: 2750 - total flux cleaned = -0.000223931 Jy ! Component: 2800 - total flux cleaned = -0.000234626 Jy ! Component: 2850 - total flux cleaned = -0.00028793 Jy ! Component: 2900 - total flux cleaned = -0.000309052 Jy ! Component: 2950 - total flux cleaned = -0.000298594 Jy ! Component: 3000 - total flux cleaned = -0.000350907 Jy ! Component: 3050 - total flux cleaned = -0.000361288 Jy ! Component: 3100 - total flux cleaned = -0.000361334 Jy ! Component: 3150 - total flux cleaned = -0.000361454 Jy ! Component: 3200 - total flux cleaned = -0.000433065 Jy ! Component: 3250 - total flux cleaned = -0.000443233 Jy ! Component: 3300 - total flux cleaned = -0.000483704 Jy ! Component: 3350 - total flux cleaned = -0.000483624 Jy ! Component: 3400 - total flux cleaned = -0.000533646 Jy ! Component: 3450 - total flux cleaned = -0.000533587 Jy ! Component: 3500 - total flux cleaned = -0.000533636 Jy ! Component: 3550 - total flux cleaned = -0.000553412 Jy ! Component: 3600 - total flux cleaned = -0.000553448 Jy ! Component: 3650 - total flux cleaned = -0.000582804 Jy ! Component: 3700 - total flux cleaned = -0.000573009 Jy ! Component: 3750 - total flux cleaned = -0.000573007 Jy ! Component: 3800 - total flux cleaned = -0.00060205 Jy ! Component: 3850 - total flux cleaned = -0.000592341 Jy ! Component: 3900 - total flux cleaned = -0.000601993 Jy ! Component: 3950 - total flux cleaned = -0.000592401 Jy ! Component: 4000 - total flux cleaned = -0.00057321 Jy ! Component: 4050 - total flux cleaned = -0.000601828 Jy ! Total flux subtracted in 4096 components = -0.000592316 Jy ! Clean residual min=-0.000507 max=0.000628 Jy/beam ! Clean residual mean=-0.000001 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.156441 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 394 components and 0.156441 Jy ![Exited script file: muppet] wmap "J1739+3358_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.05 x 9.397 at 17.03 degrees (North through East) ! Clean map min=-0.0014921 max=0.12645 Jy/beam ! Writing clean map to FITS file: J1739+3358_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.126445 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00015914 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.377569 0.377569 0.755139 1.51028 3.02056 6.04111 12.0822 24.1644 48.3289 96.6578 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.126 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.05 x 9.397 at 17.03 degrees (North through East) ! Clean map min=-0.0014921 max=0.12645 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1739+3358_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 23:01:46 2017