! Started logfile: J1738-1503_S_2015_01_22_pus_uvs.log on Tue Jan 3 23:01:34 2017 obs J1738-1503_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1738-1503_S_2015_01_22_pus_uva.fits ! AN table 1: 43 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.775194 visibilities/baseline/integration-bin. ! Found source: J1738-1503 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 6000 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1738-1503_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.859813Jy sigma=0.008841 ! Fit after self-cal, rms=0.843571Jy sigma=0.008670 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.385 mas, bmaj=6.362 mas, bpa=-8.342 degrees ! Estimated noise=1364.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119209 Jy ! Component: 100 - total flux cleaned = 0.152748 Jy ! Total flux subtracted in 100 components = 0.152748 Jy ! Clean residual min=-0.010067 max=0.014806 Jy/beam ! Clean residual mean=0.000021 rms=0.002854 Jy/beam ! Combined flux in latest and established models = 0.152748 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.152748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090222Jy sigma=0.000888 ! Fit after self-cal, rms=0.090186Jy sigma=0.000888 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=7.307 mas, bpa=-6.279 degrees ! Estimated noise=896.176 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227583 Jy ! Component: 100 - total flux cleaned = 0.0333472 Jy ! Component: 150 - total flux cleaned = 0.0386193 Jy ! Component: 200 - total flux cleaned = 0.0413714 Jy ! Total flux subtracted in 200 components = 0.0413714 Jy ! Clean residual min=-0.006956 max=0.011715 Jy/beam ! Clean residual mean=0.000016 rms=0.002524 Jy/beam ! Combined flux in latest and established models = 0.194119 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 25 components and 0.194119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085253Jy sigma=0.000828 ! Fit after self-cal, rms=0.085215Jy sigma=0.000827 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 0.94 KP 1.03 ! LA 1.40 MK 1.01 NL 1.09 OV 0.95 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.01 KP 0.95 ! LA 1.35 MK 1.04 NL 1.16 OV 0.94 ! PT 0.98 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.00* HN 1.01 KP 0.81 ! LA 1.14 MK 1.03 NL 1.10 OV 0.87 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 0.95 KP 0.78 ! LA 1.21 MK 1.03 NL 1.02 OV 0.92 ! PT 1.02 SC 1.03 ! ! ! Fit before self-cal, rms=0.085215Jy sigma=0.000827 ! Fit after self-cal, rms=0.085373Jy sigma=0.000782 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.82 mas, bmaj=7.336 mas, bpa=-6.082 degrees ! Estimated noise=892.228 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15, 52). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00411447 Jy ! Component: 100 - total flux cleaned = 0.00573754 Jy ! Component: 150 - total flux cleaned = 0.0064247 Jy ! Component: 200 - total flux cleaned = 0.00699524 Jy ! Total flux subtracted in 200 components = 0.00699524 Jy ! Clean residual min=-0.002752 max=0.002767 Jy/beam ! Clean residual mean=0.000003 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.201115 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 48 components and 0.201115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085177Jy sigma=0.000780 ! Fit after self-cal, rms=0.085382Jy sigma=0.000780 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085382Jy sigma=0.000780 ! Fit after self-cal, rms=0.085254Jy sigma=0.000780 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=7.337 mas, bpa=-6.122 degrees ! Estimated noise=890.016 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00083364 Jy ! Component: 100 - total flux cleaned = 0.0010702 Jy ! Component: 150 - total flux cleaned = 0.00122528 Jy ! Component: 200 - total flux cleaned = 0.00136603 Jy ! Total flux subtracted in 200 components = 0.00136603 Jy ! Clean residual min=-0.002629 max=0.002763 Jy/beam ! Clean residual mean=0.000001 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.202481 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 63 components and 0.202481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085240Jy sigma=0.000780 ! Fit after self-cal, rms=0.085240Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157977 Jy ! Component: 100 - total flux cleaned = 0.000228714 Jy ! Component: 150 - total flux cleaned = 0.000310094 Jy ! Component: 200 - total flux cleaned = 0.000355378 Jy ! Total flux subtracted in 200 components = 0.000355378 Jy ! Clean residual min=-0.002578 max=0.002763 Jy/beam ! Clean residual mean=0.000001 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.202836 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 70 components and 0.202836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085234Jy sigma=0.000779 ! Fit after self-cal, rms=0.085234Jy sigma=0.000779 ! Inverting map ! Added new window around map position (-56.5, -123.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235063 Jy ! Component: 100 - total flux cleaned = 0.00299316 Jy ! Component: 150 - total flux cleaned = 0.00346166 Jy ! Component: 200 - total flux cleaned = 0.0037115 Jy ! Total flux subtracted in 200 components = 0.0037115 Jy ! Clean residual min=-0.002623 max=0.002194 Jy/beam ! Clean residual mean=0.000002 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.206547 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 0.206548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085137Jy sigma=0.000778 ! Fit after self-cal, rms=0.085132Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085132Jy sigma=0.000778 ! Fit after self-cal, rms=0.085177Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=7.339 mas, bpa=-6.132 degrees ! Estimated noise=888.912 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000646227 Jy ! Component: 100 - total flux cleaned = 0.000859945 Jy ! Component: 150 - total flux cleaned = 0.00102192 Jy ! Component: 200 - total flux cleaned = 0.00111767 Jy ! Total flux subtracted in 200 components = 0.00111767 Jy ! Clean residual min=-0.002618 max=0.002148 Jy/beam ! Clean residual mean=0.000001 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.207665 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 0.207665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085158Jy sigma=0.000778 ! Fit after self-cal, rms=0.085161Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.14807e-05 Jy ! Component: 100 - total flux cleaned = 0.000138086 Jy ! Component: 150 - total flux cleaned = 0.000222244 Jy ! Component: 200 - total flux cleaned = 0.000282783 Jy ! Total flux subtracted in 200 components = 0.000282783 Jy ! Clean residual min=-0.002609 max=0.002231 Jy/beam ! Clean residual mean=0.000001 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.207948 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 107 components and 0.207948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085152Jy sigma=0.000778 ! Fit after self-cal, rms=0.085153Jy sigma=0.000778 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085153Jy sigma=0.000778 ! Fit after self-cal, rms=0.085149Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.882 mas, bmaj=13.71 mas, bpa=-4.488 degrees ! Estimated noise=1214.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000246296 Jy ! Component: 100 - total flux cleaned = 0.000589177 Jy ! Component: 150 - total flux cleaned = 0.000895147 Jy ! Component: 200 - total flux cleaned = 0.00100933 Jy ! Total flux subtracted in 200 components = 0.00100933 Jy ! Clean residual min=-0.002086 max=0.002022 Jy/beam ! Clean residual mean=0.000002 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.208957 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 119 components and 0.208957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085145Jy sigma=0.000778 ! Fit after self-cal, rms=0.085146Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.34139e-05 Jy ! Component: 100 - total flux cleaned = 0.000184912 Jy ! Component: 150 - total flux cleaned = 0.000218536 Jy ! Component: 200 - total flux cleaned = 0.000281847 Jy ! Total flux subtracted in 200 components = 0.000281847 Jy ! Clean residual min=-0.002043 max=0.001875 Jy/beam ! Clean residual mean=0.000002 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.209239 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 128 components and 0.209239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085146Jy sigma=0.000778 ! Fit after self-cal, rms=0.085146Jy sigma=0.000778 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=7.339 mas, bpa=-6.129 degrees ! Estimated noise=888.503 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.819 x 7.339 at -6.129 degrees (North through East) ! Clean map min=-0.0024425 max=0.1607 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.398 mas, bmaj=6.382 mas, bpa=-8.107 degrees ! Estimated noise=1363.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118917 Jy ! Component: 100 - total flux cleaned = 0.152668 Jy ! Component: 150 - total flux cleaned = 0.169219 Jy ! Component: 200 - total flux cleaned = 0.178716 Jy ! Total flux subtracted in 200 components = 0.178716 Jy ! Clean residual min=-0.005310 max=0.005625 Jy/beam ! Clean residual mean=0.000007 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.178716 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.178716 Jy ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=7.339 mas, bpa=-6.129 degrees ! Estimated noise=888.503 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00803793 Jy ! Component: 100 - total flux cleaned = 0.0126235 Jy ! Component: 150 - total flux cleaned = 0.0160304 Jy ! Component: 200 - total flux cleaned = 0.0183175 Jy ! Total flux subtracted in 200 components = 0.0183175 Jy ! Clean residual min=-0.002952 max=0.002599 Jy/beam ! Clean residual mean=0.000005 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.197033 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 54 components and 0.197033 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.882 mas, bmaj=13.71 mas, bpa=-4.488 degrees ! Estimated noise=1214.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00333251 Jy ! Component: 100 - total flux cleaned = 0.00555952 Jy ! Component: 150 - total flux cleaned = 0.00724712 Jy ! Component: 200 - total flux cleaned = 0.00845228 Jy ! Total flux subtracted in 200 components = 0.00845228 Jy ! Clean residual min=-0.002646 max=0.002066 Jy/beam ! Clean residual mean=0.000006 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.205485 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000392777 Jy ! Component: 100 - total flux cleaned = 0.000706774 Jy ! Component: 150 - total flux cleaned = 0.00102765 Jy ! Component: 200 - total flux cleaned = 0.00131711 Jy ! Total flux subtracted in 200 components = 0.00131711 Jy ! Clean residual min=-0.002375 max=0.001929 Jy/beam ! Clean residual mean=0.000005 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.206802 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 100 components and 0.206802 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=7.339 mas, bpa=-6.129 degrees ! Estimated noise=888.503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000517456 Jy ! Component: 100 - total flux cleaned = 0.000510101 Jy ! Component: 150 - total flux cleaned = 0.000806305 Jy ! Component: 200 - total flux cleaned = 0.000997139 Jy ! Total flux subtracted in 200 components = 0.000997139 Jy ! Clean residual min=-0.002622 max=0.001988 Jy/beam ! Clean residual mean=0.000002 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.2078 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 119 components and 0.2078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085158Jy sigma=0.000778 ! Fit after self-cal, rms=0.085159Jy sigma=0.000778 wmodel J1738-1503_S_2015_01_22_pus_map.mod ! Writing 119 model components to file: J1738-1503_S_2015_01_22_pus_map.mod wobs J1738-1503_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1738-1503_S_2015_01_22_pus_uvs.fits wwins J1738-1503_S_2015_01_22_pus_map.win ! wwins: Wrote 4 windows to J1738-1503_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00075258 Jy ! Component: 100 - total flux cleaned = -0.00138925 Jy ! Component: 150 - total flux cleaned = -0.00191385 Jy ! Component: 200 - total flux cleaned = -0.00234584 Jy ! Component: 250 - total flux cleaned = -0.00263129 Jy ! Component: 300 - total flux cleaned = -0.00287559 Jy ! Component: 350 - total flux cleaned = -0.0031122 Jy ! Component: 400 - total flux cleaned = -0.00339889 Jy ! Component: 450 - total flux cleaned = -0.00364955 Jy ! Component: 500 - total flux cleaned = -0.00389353 Jy ! Component: 550 - total flux cleaned = -0.00415778 Jy ! Component: 600 - total flux cleaned = -0.00444141 Jy ! Component: 650 - total flux cleaned = -0.00466759 Jy ! Component: 700 - total flux cleaned = -0.00486352 Jy ! Component: 750 - total flux cleaned = -0.00500716 Jy ! Component: 800 - total flux cleaned = -0.00517143 Jy ! Component: 850 - total flux cleaned = -0.00537821 Jy ! Component: 900 - total flux cleaned = -0.00551316 Jy ! Component: 950 - total flux cleaned = -0.0056239 Jy ! Component: 1000 - total flux cleaned = -0.00577577 Jy ! Component: 1050 - total flux cleaned = -0.00583966 Jy ! Component: 1100 - total flux cleaned = -0.00592327 Jy ! Component: 1150 - total flux cleaned = -0.00596406 Jy ! Component: 1200 - total flux cleaned = -0.00600458 Jy ! Component: 1250 - total flux cleaned = -0.00608299 Jy ! Component: 1300 - total flux cleaned = -0.00614075 Jy ! Component: 1350 - total flux cleaned = -0.00616011 Jy ! Component: 1400 - total flux cleaned = -0.00625322 Jy ! Component: 1450 - total flux cleaned = -0.00623481 Jy ! Component: 1500 - total flux cleaned = -0.00628861 Jy ! Component: 1550 - total flux cleaned = -0.00630604 Jy ! Component: 1600 - total flux cleaned = -0.00628887 Jy ! Component: 1650 - total flux cleaned = -0.00630618 Jy ! Component: 1700 - total flux cleaned = -0.00630601 Jy ! Component: 1750 - total flux cleaned = -0.00627308 Jy ! Component: 1800 - total flux cleaned = -0.00635532 Jy ! Component: 1850 - total flux cleaned = -0.00633909 Jy ! Component: 1900 - total flux cleaned = -0.00635499 Jy ! Component: 1950 - total flux cleaned = -0.00637037 Jy ! Component: 2000 - total flux cleaned = -0.00633947 Jy ! Component: 2050 - total flux cleaned = -0.0063547 Jy ! Component: 2100 - total flux cleaned = -0.00635474 Jy ! Component: 2150 - total flux cleaned = -0.00635473 Jy ! Component: 2200 - total flux cleaned = -0.00639909 Jy ! Component: 2250 - total flux cleaned = -0.00639913 Jy ! Component: 2300 - total flux cleaned = -0.0063849 Jy ! Component: 2350 - total flux cleaned = -0.00642758 Jy ! Component: 2400 - total flux cleaned = -0.00644144 Jy ! Component: 2450 - total flux cleaned = -0.00639964 Jy ! Component: 2500 - total flux cleaned = -0.00642723 Jy ! Component: 2550 - total flux cleaned = -0.00645441 Jy ! Component: 2600 - total flux cleaned = -0.00645428 Jy ! Component: 2650 - total flux cleaned = -0.00644104 Jy ! Component: 2700 - total flux cleaned = -0.0064016 Jy ! Component: 2750 - total flux cleaned = -0.0064409 Jy ! Component: 2800 - total flux cleaned = -0.00644084 Jy ! Component: 2850 - total flux cleaned = -0.00644061 Jy ! Component: 2900 - total flux cleaned = -0.00641535 Jy ! Component: 2950 - total flux cleaned = -0.00645313 Jy ! Component: 3000 - total flux cleaned = -0.00646551 Jy ! Component: 3050 - total flux cleaned = -0.00645316 Jy ! Component: 3100 - total flux cleaned = -0.00648975 Jy ! Component: 3150 - total flux cleaned = -0.0064777 Jy ! Component: 3200 - total flux cleaned = -0.00652569 Jy ! Component: 3250 - total flux cleaned = -0.00652563 Jy ! Component: 3300 - total flux cleaned = -0.00653748 Jy ! Component: 3350 - total flux cleaned = -0.00656078 Jy ! Component: 3400 - total flux cleaned = -0.00657231 Jy ! Component: 3450 - total flux cleaned = -0.00659527 Jy ! Component: 3500 - total flux cleaned = -0.00661807 Jy ! Component: 3550 - total flux cleaned = -0.00666312 Jy ! Component: 3600 - total flux cleaned = -0.00667431 Jy ! Component: 3650 - total flux cleaned = -0.00667432 Jy ! Component: 3700 - total flux cleaned = -0.0066743 Jy ! Component: 3750 - total flux cleaned = -0.00670719 Jy ! Component: 3800 - total flux cleaned = -0.00671801 Jy ! Component: 3850 - total flux cleaned = -0.006718 Jy ! Component: 3900 - total flux cleaned = -0.00667503 Jy ! Component: 3950 - total flux cleaned = -0.00667508 Jy ! Component: 4000 - total flux cleaned = -0.00665396 Jy ! Component: 4050 - total flux cleaned = -0.00668561 Jy ! Total flux subtracted in 4096 components = -0.00666464 Jy ! Clean residual min=-0.000748 max=0.000641 Jy/beam ! Clean residual mean=0.000000 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.201135 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 351 components and 0.201135 Jy ![Exited script file: muppet] wmap "J1738-1503_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.819 x 7.339 at -6.129 degrees (North through East) ! Clean map min=-0.0015322 max=0.16027 Jy/beam ! Writing clean map to FITS file: J1738-1503_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.160267 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000173311 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.324418 0.324418 0.648835 1.29767 2.59534 5.19068 10.3814 20.7627 41.5254 83.0509 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.16 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.819 x 7.339 at -6.129 degrees (North through East) ! Clean map min=-0.0015322 max=0.16027 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1738-1503_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 23:01:40 2017