! Started logfile: J1737-2251_S_2015_01_22_pus_uvs.log on Tue Jan 3 23:01:28 2017 obs J1737-2251_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1737-2251_S_2015_01_22_pus_uva.fits ! AN table 1: 62 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.566667 visibilities/baseline/integration-bin. ! Found source: J1737-2251 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 6324 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1737-2251_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.949244Jy sigma=0.008593 ! Fit after self-cal, rms=0.916353Jy sigma=0.008318 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.37 mas, bmaj=6.54 mas, bpa=-11.37 degrees ! Estimated noise=1548.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0484079 Jy ! Component: 100 - total flux cleaned = 0.0661098 Jy ! Total flux subtracted in 100 components = 0.0661098 Jy ! Clean residual min=-0.007603 max=0.010453 Jy/beam ! Clean residual mean=-0.000010 rms=0.002308 Jy/beam ! Combined flux in latest and established models = 0.0661098 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0661098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108562Jy sigma=0.000893 ! Fit after self-cal, rms=0.108252Jy sigma=0.000890 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=8.839 mas, bpa=-10.11 degrees ! Estimated noise=999.822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0311799 Jy ! Component: 100 - total flux cleaned = 0.04635 Jy ! Component: 150 - total flux cleaned = 0.0544724 Jy ! Component: 200 - total flux cleaned = 0.0589442 Jy ! Total flux subtracted in 200 components = 0.0589442 Jy ! Clean residual min=-0.007392 max=0.010758 Jy/beam ! Clean residual mean=-0.000024 rms=0.002371 Jy/beam ! Combined flux in latest and established models = 0.125054 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 63 components and 0.125054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099031Jy sigma=0.000809 ! Fit after self-cal, rms=0.098691Jy sigma=0.000806 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.08 KP 0.97 ! LA 1.01 MK 1.01 NL 1.28 OV 1.03 ! PT 1.04 SC 1.24 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.04 KP 0.88 ! LA 1.09 MK 1.11 NL 1.73 OV 0.99 ! PT 1.04 SC 1.26 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 1.01 KP 0.78 ! LA 0.84 MK 1.01 NL 1.33 OV 0.90 ! PT 1.02 SC 1.20 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.95 KP 0.74 ! LA 0.95 MK 1.10 NL 1.18 OV 0.82 ! PT 0.97 SC 0.96 ! ! ! Fit before self-cal, rms=0.098691Jy sigma=0.000806 ! Fit after self-cal, rms=0.096966Jy sigma=0.000784 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=9.121 mas, bpa=-10.38 degrees ! Estimated noise=1022.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000193464 Jy ! Component: 100 - total flux cleaned = 0.000259045 Jy ! Component: 150 - total flux cleaned = 0.000350818 Jy ! Component: 200 - total flux cleaned = 0.000408937 Jy ! Total flux subtracted in 200 components = 0.000408937 Jy ! Clean residual min=-0.003165 max=0.003501 Jy/beam ! Clean residual mean=-0.000000 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.125463 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 68 components and 0.125463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096946Jy sigma=0.000783 ! Fit after self-cal, rms=0.097273Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097273Jy sigma=0.000782 ! Fit after self-cal, rms=0.097663Jy sigma=0.000782 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.444 mas, bmaj=9.108 mas, bpa=-10.31 degrees ! Estimated noise=1022.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000166137 Jy ! Component: 100 - total flux cleaned = 0.000140923 Jy ! Component: 150 - total flux cleaned = 0.000140907 Jy ! Component: 200 - total flux cleaned = 0.000139343 Jy ! Total flux subtracted in 200 components = 0.000139343 Jy ! Clean residual min=-0.003226 max=0.003298 Jy/beam ! Clean residual mean=0.000000 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.125602 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 74 components and 0.125602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097650Jy sigma=0.000782 ! Fit after self-cal, rms=0.097690Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.94055e-05 Jy ! Component: 100 - total flux cleaned = -8.21191e-05 Jy ! Component: 150 - total flux cleaned = -8.31451e-05 Jy ! Component: 200 - total flux cleaned = -8.22197e-05 Jy ! Total flux subtracted in 200 components = -8.22197e-05 Jy ! Clean residual min=-0.003235 max=0.003309 Jy/beam ! Clean residual mean=0.000000 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.12552 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 75 components and 0.12552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097680Jy sigma=0.000782 ! Fit after self-cal, rms=0.097682Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097682Jy sigma=0.000782 ! Fit after self-cal, rms=0.097434Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.435 mas, bmaj=9.079 mas, bpa=-10.18 degrees ! Estimated noise=1020.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.03281e-05 Jy ! Component: 100 - total flux cleaned = 8.18159e-05 Jy ! Component: 150 - total flux cleaned = 0.000101456 Jy ! Component: 200 - total flux cleaned = 0.000119915 Jy ! Total flux subtracted in 200 components = 0.000119915 Jy ! Clean residual min=-0.003199 max=0.003280 Jy/beam ! Clean residual mean=0.000000 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.12564 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 76 components and 0.12564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097425Jy sigma=0.000782 ! Fit after self-cal, rms=0.097429Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.76334e-05 Jy ! Component: 100 - total flux cleaned = -2.95189e-05 Jy ! Component: 150 - total flux cleaned = -1.31181e-05 Jy ! Component: 200 - total flux cleaned = -1.26088e-05 Jy ! Total flux subtracted in 200 components = -1.26088e-05 Jy ! Clean residual min=-0.003191 max=0.003304 Jy/beam ! Clean residual mean=0.000000 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.125627 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 0.125627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097422Jy sigma=0.000782 ! Fit after self-cal, rms=0.097422Jy sigma=0.000782 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097422Jy sigma=0.000782 ! Fit after self-cal, rms=0.097152Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.532 mas, bmaj=18.68 mas, bpa=-8.623 degrees ! Estimated noise=1199.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000374031 Jy ! Component: 100 - total flux cleaned = 0.000374374 Jy ! Component: 150 - total flux cleaned = 0.000373773 Jy ! Component: 200 - total flux cleaned = 0.000343644 Jy ! Total flux subtracted in 200 components = 0.000343644 Jy ! Clean residual min=-0.002914 max=0.003565 Jy/beam ! Clean residual mean=0.000001 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.125971 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 79 components and 0.125971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097151Jy sigma=0.000782 ! Fit after self-cal, rms=0.097146Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.79426e-05 Jy ! Component: 100 - total flux cleaned = -1.23367e-05 Jy ! Component: 150 - total flux cleaned = -2.79613e-05 Jy ! Component: 200 - total flux cleaned = -5.46555e-05 Jy ! Total flux subtracted in 200 components = -5.46555e-05 Jy ! Clean residual min=-0.002902 max=0.003525 Jy/beam ! Clean residual mean=0.000001 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.125916 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 81 components and 0.125916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097148Jy sigma=0.000782 ! Fit after self-cal, rms=0.097147Jy sigma=0.000782 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.428 mas, bmaj=9.053 mas, bpa=-10.05 degrees ! Estimated noise=1018.75 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.428 x 9.053 at -10.05 degrees (North through East) ! Clean map min=-0.0030112 max=0.077361 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.402 mas, bmaj=6.609 mas, bpa=-10.98 degrees ! Estimated noise=1612.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0489537 Jy ! Component: 100 - total flux cleaned = 0.0694623 Jy ! Component: 150 - total flux cleaned = 0.083747 Jy ! Component: 200 - total flux cleaned = 0.0940403 Jy ! Total flux subtracted in 200 components = 0.0940403 Jy ! Clean residual min=-0.007073 max=0.007393 Jy/beam ! Clean residual mean=-0.000004 rms=0.001773 Jy/beam ! Combined flux in latest and established models = 0.0940402 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0940402 Jy ! Inverting map and beam ! Estimated beam: bmin=3.428 mas, bmaj=9.053 mas, bpa=-10.05 degrees ! Estimated noise=1018.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163811 Jy ! Component: 100 - total flux cleaned = 0.0236896 Jy ! Component: 150 - total flux cleaned = 0.0272988 Jy ! Component: 200 - total flux cleaned = 0.0291672 Jy ! Total flux subtracted in 200 components = 0.0291672 Jy ! Clean residual min=-0.003444 max=0.003251 Jy/beam ! Clean residual mean=-0.000000 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.123207 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 55 components and 0.123207 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.532 mas, bmaj=18.68 mas, bpa=-8.623 degrees ! Estimated noise=1199.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157054 Jy ! Component: 100 - total flux cleaned = 0.00176697 Jy ! Component: 150 - total flux cleaned = 0.00182941 Jy ! Component: 200 - total flux cleaned = 0.00186588 Jy ! Total flux subtracted in 200 components = 0.00186588 Jy ! Clean residual min=-0.002973 max=0.003467 Jy/beam ! Clean residual mean=0.000001 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.125073 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.97573e-05 Jy ! Component: 100 - total flux cleaned = 7.99004e-05 Jy ! Component: 150 - total flux cleaned = 0.000119519 Jy ! Component: 200 - total flux cleaned = 0.000143425 Jy ! Total flux subtracted in 200 components = 0.000143425 Jy ! Clean residual min=-0.002926 max=0.003446 Jy/beam ! Clean residual mean=0.000001 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.125217 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 0.125217 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.428 mas, bmaj=9.053 mas, bpa=-10.05 degrees ! Estimated noise=1018.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000535449 Jy ! Component: 100 - total flux cleaned = -0.00057534 Jy ! Component: 150 - total flux cleaned = -0.000577082 Jy ! Component: 200 - total flux cleaned = -0.000553043 Jy ! Total flux subtracted in 200 components = -0.000553043 Jy ! Clean residual min=-0.003285 max=0.003259 Jy/beam ! Clean residual mean=-0.000000 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.124664 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 68 components and 0.124664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097152Jy sigma=0.000782 ! Fit after self-cal, rms=0.097127Jy sigma=0.000781 wmodel J1737-2251_S_2015_01_22_pus_map.mod ! Writing 68 model components to file: J1737-2251_S_2015_01_22_pus_map.mod wobs J1737-2251_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1737-2251_S_2015_01_22_pus_uvs.fits wwins J1737-2251_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1737-2251_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245626 Jy ! Component: 100 - total flux cleaned = 3.25617e-05 Jy ! Component: 150 - total flux cleaned = -0.000261366 Jy ! Component: 200 - total flux cleaned = -0.000443718 Jy ! Component: 250 - total flux cleaned = -0.000700069 Jy ! Component: 300 - total flux cleaned = -0.000902042 Jy ! Component: 350 - total flux cleaned = -0.00101799 Jy ! Component: 400 - total flux cleaned = -0.00101853 Jy ! Component: 450 - total flux cleaned = -0.000914066 Jy ! Component: 500 - total flux cleaned = -0.000710023 Jy ! Component: 550 - total flux cleaned = -0.000478125 Jy ! Component: 600 - total flux cleaned = -2.51319e-05 Jy ! Component: 650 - total flux cleaned = 0.000323166 Jy ! Component: 700 - total flux cleaned = 0.000695299 Jy ! Component: 750 - total flux cleaned = 0.000999209 Jy ! Component: 800 - total flux cleaned = 0.00129698 Jy ! Component: 850 - total flux cleaned = 0.0015598 Jy ! Component: 900 - total flux cleaned = 0.00178907 Jy ! Component: 950 - total flux cleaned = 0.00209746 Jy ! Component: 1000 - total flux cleaned = 0.00231773 Jy ! Component: 1050 - total flux cleaned = 0.00250721 Jy ! Component: 1100 - total flux cleaned = 0.00274676 Jy ! Component: 1150 - total flux cleaned = 0.00292959 Jy ! Component: 1200 - total flux cleaned = 0.00308367 Jy ! Component: 1250 - total flux cleaned = 0.00331135 Jy ! Component: 1300 - total flux cleaned = 0.00351032 Jy ! Component: 1350 - total flux cleaned = 0.00368172 Jy ! Component: 1400 - total flux cleaned = 0.00382615 Jy ! Component: 1450 - total flux cleaned = 0.00403971 Jy ! Component: 1500 - total flux cleaned = 0.00420346 Jy ! Component: 1550 - total flux cleaned = 0.00434184 Jy ! Component: 1600 - total flux cleaned = 0.00450101 Jy ! Component: 1650 - total flux cleaned = 0.00465793 Jy ! Component: 1700 - total flux cleaned = 0.00474652 Jy ! Component: 1750 - total flux cleaned = 0.00492073 Jy ! Component: 1800 - total flux cleaned = 0.00502756 Jy ! Component: 1850 - total flux cleaned = 0.00513372 Jy ! Component: 1900 - total flux cleaned = 0.00530119 Jy ! Component: 1950 - total flux cleaned = 0.00538375 Jy ! Component: 2000 - total flux cleaned = 0.00554725 Jy ! Component: 2050 - total flux cleaned = 0.00566808 Jy ! Component: 2100 - total flux cleaned = 0.0057679 Jy ! Component: 2150 - total flux cleaned = 0.00598423 Jy ! Component: 2200 - total flux cleaned = 0.00610076 Jy ! Component: 2250 - total flux cleaned = 0.00621606 Jy ! Component: 2300 - total flux cleaned = 0.00638715 Jy ! Component: 2350 - total flux cleaned = 0.00651874 Jy ! Component: 2400 - total flux cleaned = 0.00670489 Jy ! Component: 2450 - total flux cleaned = 0.00687054 Jy ! Component: 2500 - total flux cleaned = 0.00701612 Jy ! Component: 2550 - total flux cleaned = 0.00719645 Jy ! Component: 2600 - total flux cleaned = 0.00733916 Jy ! Component: 2650 - total flux cleaned = 0.00746261 Jy ! Component: 2700 - total flux cleaned = 0.00760219 Jy ! Component: 2750 - total flux cleaned = 0.00767136 Jy ! Component: 2800 - total flux cleaned = 0.00775717 Jy ! Component: 2850 - total flux cleaned = 0.00782531 Jy ! Component: 2900 - total flux cleaned = 0.00794344 Jy ! Component: 2950 - total flux cleaned = 0.00801061 Jy ! Component: 3000 - total flux cleaned = 0.00804397 Jy ! Component: 3050 - total flux cleaned = 0.00812676 Jy ! Component: 3100 - total flux cleaned = 0.00812689 Jy ! Component: 3150 - total flux cleaned = 0.0081926 Jy ! Component: 3200 - total flux cleaned = 0.00820896 Jy ! Component: 3250 - total flux cleaned = 0.008274 Jy ! Component: 3300 - total flux cleaned = 0.00832256 Jy ! Component: 3350 - total flux cleaned = 0.00838722 Jy ! Component: 3400 - total flux cleaned = 0.00840334 Jy ! Component: 3450 - total flux cleaned = 0.00841948 Jy ! Component: 3500 - total flux cleaned = 0.0084676 Jy ! Component: 3550 - total flux cleaned = 0.00845176 Jy ! Component: 3600 - total flux cleaned = 0.00849956 Jy ! Component: 3650 - total flux cleaned = 0.00853141 Jy ! Component: 3700 - total flux cleaned = 0.0085315 Jy ! Component: 3750 - total flux cleaned = 0.00856312 Jy ! Component: 3800 - total flux cleaned = 0.00854749 Jy ! Component: 3850 - total flux cleaned = 0.00853179 Jy ! Component: 3900 - total flux cleaned = 0.0085004 Jy ! Component: 3950 - total flux cleaned = 0.00851612 Jy ! Component: 4000 - total flux cleaned = 0.00850029 Jy ! Component: 4050 - total flux cleaned = 0.00846874 Jy ! Total flux subtracted in 4096 components = 0.00848444 Jy ! Clean residual min=-0.000907 max=0.000881 Jy/beam ! Clean residual mean=0.000004 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.133148 Jy keep ! Adding 216 model components to the UV plane model. ! The established model now contains 284 components and 0.133148 Jy ![Exited script file: muppet] wmap "J1737-2251_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.428 x 9.053 at -10.05 degrees (North through East) ! Clean map min=-0.0016197 max=0.078043 Jy/beam ! Writing clean map to FITS file: J1737-2251_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0780426 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000254007 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.976416 0.976416 1.95283 3.90566 7.81133 15.6227 31.2453 62.4906 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.078 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.428 x 9.053 at -10.05 degrees (North through East) ! Clean map min=-0.0016197 max=0.078043 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1737-2251_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 23:01:34 2017