! Started logfile: J1736-1944_S_2015_01_22_pus_uvs.log on Tue Jan 3 23:01:23 2017 obs J1736-1944_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1736-1944_S_2015_01_22_pus_uva.fits ! AN table 1: 63 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.690653 visibilities/baseline/integration-bin. ! Found source: J1736-1944 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 7832 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1736-1944_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.974119Jy sigma=0.008962 ! Fit after self-cal, rms=0.939115Jy sigma=0.008670 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.398 mas, bmaj=6.546 mas, bpa=-8.576 degrees ! Estimated noise=1479.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0461901 Jy ! Component: 100 - total flux cleaned = 0.0581773 Jy ! Total flux subtracted in 100 components = 0.0581773 Jy ! Clean residual min=-0.005462 max=0.006146 Jy/beam ! Clean residual mean=-0.000025 rms=0.001620 Jy/beam ! Combined flux in latest and established models = 0.0581773 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0581773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102675Jy sigma=0.000854 ! Fit after self-cal, rms=0.102284Jy sigma=0.000850 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=8.346 mas, bpa=-8.788 degrees ! Estimated noise=965.251 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105031 Jy ! Component: 100 - total flux cleaned = 0.0156735 Jy ! Component: 150 - total flux cleaned = 0.0185951 Jy ! Component: 200 - total flux cleaned = 0.0202881 Jy ! Total flux subtracted in 200 components = 0.0202881 Jy ! Clean residual min=-0.004341 max=0.004648 Jy/beam ! Clean residual mean=-0.000010 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 0.0784654 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 55 components and 0.0784654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101096Jy sigma=0.000842 ! Fit after self-cal, rms=0.101002Jy sigma=0.000840 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 1.05 KP 1.01 ! LA 0.98 MK 1.01 NL 1.34 OV 0.77 ! PT 1.11 SC 1.11 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* HN 1.24 KP 1.03 ! LA 1.06 MK 1.11 NL 1.21 OV 1.05 ! PT 1.01 SC 1.14 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.00 KP 0.95 ! LA 0.89 MK 0.99 NL 1.12 OV 0.90 ! PT 1.04 SC 1.11 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.06 KP 0.81 ! LA 1.06 MK 1.16 NL 1.05 OV 0.84 ! PT 0.78 SC 1.06 ! ! ! Fit before self-cal, rms=0.101002Jy sigma=0.000840 ! Fit after self-cal, rms=0.096961Jy sigma=0.000832 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.209 mas, bmaj=8.563 mas, bpa=-8.903 degrees ! Estimated noise=978.797 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000338956 Jy ! Component: 100 - total flux cleaned = 0.000431191 Jy ! Component: 150 - total flux cleaned = 0.000446941 Jy ! Component: 200 - total flux cleaned = 0.000462032 Jy ! Total flux subtracted in 200 components = 0.000462032 Jy ! Clean residual min=-0.002697 max=0.003012 Jy/beam ! Clean residual mean=0.000003 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.0789274 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 0.0789274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096952Jy sigma=0.000832 ! Fit after self-cal, rms=0.096992Jy sigma=0.000831 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096992Jy sigma=0.000831 ! Fit after self-cal, rms=0.097842Jy sigma=0.000831 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.226 mas, bmaj=8.608 mas, bpa=-8.981 degrees ! Estimated noise=984.339 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000306542 Jy ! Component: 100 - total flux cleaned = 0.000359963 Jy ! Component: 150 - total flux cleaned = 0.000422763 Jy ! Component: 200 - total flux cleaned = 0.000464641 Jy ! Total flux subtracted in 200 components = 0.000464641 Jy ! Clean residual min=-0.002876 max=0.002955 Jy/beam ! Clean residual mean=0.000003 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.079392 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 67 components and 0.079392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097834Jy sigma=0.000831 ! Fit after self-cal, rms=0.097897Jy sigma=0.000831 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.41542e-05 Jy ! Component: 100 - total flux cleaned = 6.58913e-05 Jy ! Component: 150 - total flux cleaned = 9.07383e-05 Jy ! Component: 200 - total flux cleaned = 0.000114206 Jy ! Total flux subtracted in 200 components = 0.000114206 Jy ! Clean residual min=-0.002840 max=0.002941 Jy/beam ! Clean residual mean=0.000003 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.0795062 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 68 components and 0.0795062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097892Jy sigma=0.000831 ! Fit after self-cal, rms=0.097893Jy sigma=0.000831 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097893Jy sigma=0.000831 ! Fit after self-cal, rms=0.098553Jy sigma=0.000831 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=8.624 mas, bpa=-9.014 degrees ! Estimated noise=989.986 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000302605 Jy ! Component: 100 - total flux cleaned = 0.000345945 Jy ! Component: 150 - total flux cleaned = 0.000396526 Jy ! Component: 200 - total flux cleaned = 0.000419616 Jy ! Total flux subtracted in 200 components = 0.000419616 Jy ! Clean residual min=-0.002869 max=0.002910 Jy/beam ! Clean residual mean=0.000003 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.0799258 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 68 components and 0.0799259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098547Jy sigma=0.000830 ! Fit after self-cal, rms=0.098570Jy sigma=0.000830 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.07461e-05 Jy ! Component: 100 - total flux cleaned = 4.45654e-05 Jy ! Component: 150 - total flux cleaned = 6.51971e-05 Jy ! Component: 200 - total flux cleaned = 7.50298e-05 Jy ! Total flux subtracted in 200 components = 7.50298e-05 Jy ! Clean residual min=-0.002858 max=0.002899 Jy/beam ! Clean residual mean=0.000003 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.0800009 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 0.0800009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098567Jy sigma=0.000830 ! Fit after self-cal, rms=0.098568Jy sigma=0.000830 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098568Jy sigma=0.000830 ! Fit after self-cal, rms=0.099020Jy sigma=0.000830 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.944 mas, bmaj=17.15 mas, bpa=-5.864 degrees ! Estimated noise=1210.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000586618 Jy ! Component: 100 - total flux cleaned = 0.000739473 Jy ! Component: 150 - total flux cleaned = 0.000761995 Jy ! Component: 200 - total flux cleaned = 0.000776878 Jy ! Total flux subtracted in 200 components = 0.000776878 Jy ! Clean residual min=-0.003196 max=0.002916 Jy/beam ! Clean residual mean=0.000007 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.0807778 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 71 components and 0.0807778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099018Jy sigma=0.000830 ! Fit after self-cal, rms=0.099030Jy sigma=0.000830 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138431 Jy ! Component: 100 - total flux cleaned = 0.000138723 Jy ! Component: 150 - total flux cleaned = 0.000154412 Jy ! Component: 200 - total flux cleaned = 0.000169251 Jy ! Total flux subtracted in 200 components = 0.000169251 Jy ! Clean residual min=-0.003206 max=0.002914 Jy/beam ! Clean residual mean=0.000007 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.080947 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 73 components and 0.080947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099031Jy sigma=0.000830 ! Fit after self-cal, rms=0.099023Jy sigma=0.000830 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=8.631 mas, bpa=-9.031 degrees ! Estimated noise=994.252 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.231 x 8.631 at -9.031 degrees (North through East) ! Clean map min=-0.0027931 max=0.062409 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.468 mas, bmaj=6.702 mas, bpa=-8.487 degrees ! Estimated noise=1580.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0481076 Jy ! Component: 100 - total flux cleaned = 0.0604714 Jy ! Component: 150 - total flux cleaned = 0.0671801 Jy ! Component: 200 - total flux cleaned = 0.0715158 Jy ! Total flux subtracted in 200 components = 0.0715158 Jy ! Clean residual min=-0.004654 max=0.004650 Jy/beam ! Clean residual mean=-0.000005 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 0.0715158 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0715158 Jy ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=8.631 mas, bpa=-9.031 degrees ! Estimated noise=994.252 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00424055 Jy ! Component: 100 - total flux cleaned = 0.00638797 Jy ! Component: 150 - total flux cleaned = 0.00754016 Jy ! Component: 200 - total flux cleaned = 0.0081056 Jy ! Total flux subtracted in 200 components = 0.0081056 Jy ! Clean residual min=-0.002982 max=0.002971 Jy/beam ! Clean residual mean=0.000003 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.0796214 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 50 components and 0.0796214 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.944 mas, bmaj=17.15 mas, bpa=-5.864 degrees ! Estimated noise=1210.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000780154 Jy ! Component: 100 - total flux cleaned = 0.000907502 Jy ! Component: 150 - total flux cleaned = 0.000949293 Jy ! Component: 200 - total flux cleaned = 0.000988629 Jy ! Total flux subtracted in 200 components = 0.000988629 Jy ! Clean residual min=-0.003289 max=0.002938 Jy/beam ! Clean residual mean=0.000006 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.08061 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.97039e-05 Jy ! Component: 100 - total flux cleaned = 7.34016e-05 Jy ! Component: 150 - total flux cleaned = 0.000107304 Jy ! Component: 200 - total flux cleaned = 0.000139658 Jy ! Total flux subtracted in 200 components = 0.000139658 Jy ! Clean residual min=-0.003268 max=0.002913 Jy/beam ! Clean residual mean=0.000006 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.0807497 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 54 components and 0.0807497 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=8.631 mas, bpa=-9.031 degrees ! Estimated noise=994.252 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000357742 Jy ! Component: 100 - total flux cleaned = -0.000386502 Jy ! Component: 150 - total flux cleaned = -0.000386384 Jy ! Component: 200 - total flux cleaned = -0.000386375 Jy ! Total flux subtracted in 200 components = -0.000386375 Jy ! Clean residual min=-0.002936 max=0.002987 Jy/beam ! Clean residual mean=0.000003 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.0803633 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.0803633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099028Jy sigma=0.000830 ! Fit after self-cal, rms=0.099024Jy sigma=0.000830 wmodel J1736-1944_S_2015_01_22_pus_map.mod ! Writing 61 model components to file: J1736-1944_S_2015_01_22_pus_map.mod wobs J1736-1944_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1736-1944_S_2015_01_22_pus_uvs.fits wwins J1736-1944_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1736-1944_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000430584 Jy ! Component: 100 - total flux cleaned = 0.000858337 Jy ! Component: 150 - total flux cleaned = 0.00116311 Jy ! Component: 200 - total flux cleaned = 0.00108207 Jy ! Component: 250 - total flux cleaned = 0.00104229 Jy ! Component: 300 - total flux cleaned = 0.00089563 Jy ! Component: 350 - total flux cleaned = 0.000896863 Jy ! Component: 400 - total flux cleaned = 0.000964045 Jy ! Component: 450 - total flux cleaned = 0.000995975 Jy ! Component: 500 - total flux cleaned = 0.00106049 Jy ! Component: 550 - total flux cleaned = 0.00118411 Jy ! Component: 600 - total flux cleaned = 0.00115455 Jy ! Component: 650 - total flux cleaned = 0.00115526 Jy ! Component: 700 - total flux cleaned = 0.00115568 Jy ! Component: 750 - total flux cleaned = 0.00118413 Jy ! Component: 800 - total flux cleaned = 0.0011841 Jy ! Component: 850 - total flux cleaned = 0.00115692 Jy ! Component: 900 - total flux cleaned = 0.00113001 Jy ! Component: 950 - total flux cleaned = 0.00105227 Jy ! Component: 1000 - total flux cleaned = 0.0010276 Jy ! Component: 1050 - total flux cleaned = 0.00107828 Jy ! Component: 1100 - total flux cleaned = 0.00100382 Jy ! Component: 1150 - total flux cleaned = 0.00095526 Jy ! Component: 1200 - total flux cleaned = 0.000979167 Jy ! Component: 1250 - total flux cleaned = 0.000978881 Jy ! Component: 1300 - total flux cleaned = 0.000908857 Jy ! Component: 1350 - total flux cleaned = 0.000886094 Jy ! Component: 1400 - total flux cleaned = 0.000931292 Jy ! Component: 1450 - total flux cleaned = 0.000886387 Jy ! Component: 1500 - total flux cleaned = 0.000820809 Jy ! Component: 1550 - total flux cleaned = 0.000755976 Jy ! Component: 1600 - total flux cleaned = 0.000691853 Jy ! Component: 1650 - total flux cleaned = 0.000670915 Jy ! Component: 1700 - total flux cleaned = 0.000587956 Jy ! Component: 1750 - total flux cleaned = 0.000629714 Jy ! Component: 1800 - total flux cleaned = 0.000629713 Jy ! Component: 1850 - total flux cleaned = 0.000569311 Jy ! Component: 1900 - total flux cleaned = 0.000648831 Jy ! Component: 1950 - total flux cleaned = 0.000668056 Jy ! Component: 2000 - total flux cleaned = 0.000668186 Jy ! Component: 2050 - total flux cleaned = 0.000726279 Jy ! Component: 2100 - total flux cleaned = 0.000803203 Jy ! Component: 2150 - total flux cleaned = 0.000879339 Jy ! Component: 2200 - total flux cleaned = 0.000898336 Jy ! Component: 2250 - total flux cleaned = 0.0010291 Jy ! Component: 2300 - total flux cleaned = 0.00110307 Jy ! Component: 2350 - total flux cleaned = 0.0011581 Jy ! Component: 2400 - total flux cleaned = 0.00123104 Jy ! Component: 2450 - total flux cleaned = 0.0013033 Jy ! Component: 2500 - total flux cleaned = 0.00130319 Jy ! Component: 2550 - total flux cleaned = 0.00140989 Jy ! Component: 2600 - total flux cleaned = 0.00142739 Jy ! Component: 2650 - total flux cleaned = 0.00148004 Jy ! Component: 2700 - total flux cleaned = 0.0015149 Jy ! Component: 2750 - total flux cleaned = 0.00154969 Jy ! Component: 2800 - total flux cleaned = 0.00154964 Jy ! Component: 2850 - total flux cleaned = 0.00160106 Jy ! Component: 2900 - total flux cleaned = 0.00168605 Jy ! Component: 2950 - total flux cleaned = 0.00175366 Jy ! Component: 3000 - total flux cleaned = 0.00177048 Jy ! Component: 3050 - total flux cleaned = 0.00182059 Jy ! Component: 3100 - total flux cleaned = 0.00180389 Jy ! Component: 3150 - total flux cleaned = 0.00188658 Jy ! Component: 3200 - total flux cleaned = 0.00201849 Jy ! Component: 3250 - total flux cleaned = 0.00200196 Jy ! Component: 3300 - total flux cleaned = 0.00211644 Jy ! Component: 3350 - total flux cleaned = 0.00216534 Jy ! Component: 3400 - total flux cleaned = 0.00227898 Jy ! Component: 3450 - total flux cleaned = 0.00234356 Jy ! Component: 3500 - total flux cleaned = 0.00235965 Jy ! Component: 3550 - total flux cleaned = 0.00242382 Jy ! Component: 3600 - total flux cleaned = 0.00247187 Jy ! Component: 3650 - total flux cleaned = 0.00255164 Jy ! Component: 3700 - total flux cleaned = 0.00263111 Jy ! Component: 3750 - total flux cleaned = 0.00259941 Jy ! Component: 3800 - total flux cleaned = 0.00264695 Jy ! Component: 3850 - total flux cleaned = 0.00267847 Jy ! Component: 3900 - total flux cleaned = 0.00264692 Jy ! Component: 3950 - total flux cleaned = 0.00269412 Jy ! Component: 4000 - total flux cleaned = 0.00267849 Jy ! Component: 4050 - total flux cleaned = 0.00270991 Jy ! Total flux subtracted in 4096 components = 0.00267855 Jy ! Clean residual min=-0.001029 max=0.000972 Jy/beam ! Clean residual mean=-0.000002 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.0830419 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 317 components and 0.0830419 Jy ![Exited script file: muppet] wmap "J1736-1944_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.231 x 8.631 at -9.031 degrees (North through East) ! Clean map min=-0.0014679 max=0.062832 Jy/beam ! Writing clean map to FITS file: J1736-1944_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0628324 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000284848 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.36004 1.36004 2.72008 5.44015 10.8803 21.7606 43.5212 87.0425 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.231 x 8.631 at -9.031 degrees (North through East) ! Clean map min=-0.0014679 max=0.062832 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1736-1944_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 23:01:28 2017