! Started logfile: J1735+0808_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:33:39 2017 obs J1735+0808_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1735+0808_S_2014_01_04_pus_uva.fits ! AN table 1: 85 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.49902 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1735+0808 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6108 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1735+0808_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.872584Jy sigma=0.012800 ! Fit after self-cal, rms=0.844306Jy sigma=0.012480 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.856 mas, bmaj=5.527 mas, bpa=2.861 degrees ! Estimated noise=948.211 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115328 Jy ! Component: 100 - total flux cleaned = 0.147571 Jy ! Total flux subtracted in 100 components = 0.147571 Jy ! Clean residual min=-0.008488 max=0.013493 Jy/beam ! Clean residual mean=0.000026 rms=0.002773 Jy/beam ! Combined flux in latest and established models = 0.147571 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.147571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088146Jy sigma=0.001036 ! Fit after self-cal, rms=0.088085Jy sigma=0.001035 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.379 mas, bmaj=6.128 mas, bpa=1.645 degrees ! Estimated noise=690.218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163064 Jy ! Component: 100 - total flux cleaned = 0.0240353 Jy ! Component: 150 - total flux cleaned = 0.0269043 Jy ! Component: 200 - total flux cleaned = 0.0275983 Jy ! Total flux subtracted in 200 components = 0.0275983 Jy ! Clean residual min=-0.008709 max=0.014729 Jy/beam ! Clean residual mean=0.000026 rms=0.003113 Jy/beam ! Combined flux in latest and established models = 0.175169 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 32 components and 0.175169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083580Jy sigma=0.001025 ! Fit after self-cal, rms=0.083486Jy sigma=0.001025 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* KP 1.00* LA 0.92 ! MK 0.98 NL 0.97 OV 0.94 PT 1.00 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.41 FD 1.00* KP 1.00* LA 0.93 ! MK 0.93 NL 1.00 OV 0.96 PT 1.02 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 1.00* KP 1.00* LA 0.76 ! MK 0.94 NL 0.96 OV 0.90 PT 0.96 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* KP 1.00* LA 0.84 ! MK 0.95 NL 1.03 OV 0.91 PT 0.94 ! SC 0.90 ! ! ! Fit before self-cal, rms=0.083486Jy sigma=0.001025 ! Fit after self-cal, rms=0.075751Jy sigma=0.000944 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=6.26 mas, bpa=0.93 degrees ! Estimated noise=692.023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00338512 Jy ! Component: 100 - total flux cleaned = 0.00400632 Jy ! Component: 150 - total flux cleaned = 0.00406876 Jy ! Component: 200 - total flux cleaned = 0.00417117 Jy ! Total flux subtracted in 200 components = 0.00417117 Jy ! Clean residual min=-0.006924 max=0.006079 Jy/beam ! Clean residual mean=-0.000005 rms=0.001748 Jy/beam ! Combined flux in latest and established models = 0.179341 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.179341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075509Jy sigma=0.000942 ! Fit after self-cal, rms=0.074783Jy sigma=0.000940 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074783Jy sigma=0.000940 ! Fit after self-cal, rms=0.074219Jy sigma=0.000909 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.297 mas, bmaj=6.251 mas, bpa=0.3908 degrees ! Estimated noise=693.888 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000861135 Jy ! Component: 100 - total flux cleaned = 0.000801595 Jy ! Component: 150 - total flux cleaned = 0.000798809 Jy ! Component: 200 - total flux cleaned = 0.000754962 Jy ! Total flux subtracted in 200 components = 0.000754962 Jy ! Clean residual min=-0.002988 max=0.003497 Jy/beam ! Clean residual mean=-0.000002 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.180096 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.180096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074110Jy sigma=0.000908 ! Fit after self-cal, rms=0.074235Jy sigma=0.000908 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-64.5, 39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00302207 Jy ! Component: 100 - total flux cleaned = 0.00446646 Jy ! Component: 150 - total flux cleaned = 0.00512863 Jy ! Component: 200 - total flux cleaned = 0.00524519 Jy ! Total flux subtracted in 200 components = 0.00524519 Jy ! Clean residual min=-0.002485 max=0.002341 Jy/beam ! Clean residual mean=-0.000002 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.185341 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 0.185341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074091Jy sigma=0.000906 ! Fit after self-cal, rms=0.074081Jy sigma=0.000906 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074081Jy sigma=0.000906 ! Fit after self-cal, rms=0.074502Jy sigma=0.000906 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=6.251 mas, bpa=0.2781 degrees ! Estimated noise=697.083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150871 Jy ! Component: 100 - total flux cleaned = 0.00178276 Jy ! Component: 150 - total flux cleaned = 0.00193942 Jy ! Component: 200 - total flux cleaned = 0.00204545 Jy ! Total flux subtracted in 200 components = 0.00204545 Jy ! Clean residual min=-0.002475 max=0.002407 Jy/beam ! Clean residual mean=-0.000001 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.187386 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 70 components and 0.187386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074430Jy sigma=0.000905 ! Fit after self-cal, rms=0.074426Jy sigma=0.000905 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326591 Jy ! Component: 100 - total flux cleaned = 0.000419235 Jy ! Component: 150 - total flux cleaned = 0.000476506 Jy ! Component: 200 - total flux cleaned = 0.000503985 Jy ! Total flux subtracted in 200 components = 0.000503985 Jy ! Clean residual min=-0.002372 max=0.002323 Jy/beam ! Clean residual mean=-0.000001 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.18789 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.18789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074395Jy sigma=0.000905 ! Fit after self-cal, rms=0.074400Jy sigma=0.000905 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074400Jy sigma=0.000905 ! Fit after self-cal, rms=0.074681Jy sigma=0.000905 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.247 mas, bmaj=10.41 mas, bpa=2.347 degrees ! Estimated noise=846.186 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152876 Jy ! Component: 100 - total flux cleaned = 0.00229472 Jy ! Component: 150 - total flux cleaned = 0.00280325 Jy ! Component: 200 - total flux cleaned = 0.00283658 Jy ! Total flux subtracted in 200 components = 0.00283658 Jy ! Clean residual min=-0.002707 max=0.002376 Jy/beam ! Clean residual mean=-0.000004 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.190727 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 0.190727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074650Jy sigma=0.000905 ! Fit after self-cal, rms=0.074639Jy sigma=0.000905 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.62911e-05 Jy ! Component: 100 - total flux cleaned = 0.000211634 Jy ! Component: 150 - total flux cleaned = 0.000249277 Jy ! Component: 200 - total flux cleaned = 0.000260527 Jy ! Total flux subtracted in 200 components = 0.000260527 Jy ! Clean residual min=-0.002660 max=0.002381 Jy/beam ! Clean residual mean=-0.000004 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.190987 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 106 components and 0.190987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074636Jy sigma=0.000905 ! Fit after self-cal, rms=0.074637Jy sigma=0.000905 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=6.25 mas, bpa=0.1864 degrees ! Estimated noise=699.998 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.285 x 6.25 at 0.1864 degrees (North through East) ! Clean map min=-0.00225 max=0.15015 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.769 mas, bmaj=5.669 mas, bpa=1.449 degrees ! Estimated noise=959.921 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.116961 Jy ! Component: 100 - total flux cleaned = 0.151777 Jy ! Component: 150 - total flux cleaned = 0.166258 Jy ! Component: 200 - total flux cleaned = 0.173153 Jy ! Total flux subtracted in 200 components = 0.173153 Jy ! Clean residual min=-0.005258 max=0.004638 Jy/beam ! Clean residual mean=0.000000 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.173153 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.173153 Jy ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=6.25 mas, bpa=0.1864 degrees ! Estimated noise=699.998 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504485 Jy ! Component: 100 - total flux cleaned = 0.00818369 Jy ! Component: 150 - total flux cleaned = 0.0104193 Jy ! Component: 200 - total flux cleaned = 0.0118945 Jy ! Total flux subtracted in 200 components = 0.0118945 Jy ! Clean residual min=-0.002861 max=0.002462 Jy/beam ! Clean residual mean=0.000000 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.185048 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 50 components and 0.185048 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.247 mas, bmaj=10.41 mas, bpa=2.347 degrees ! Estimated noise=846.186 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019965 Jy ! Component: 100 - total flux cleaned = 0.00323338 Jy ! Component: 150 - total flux cleaned = 0.00410633 Jy ! Component: 200 - total flux cleaned = 0.00468923 Jy ! Total flux subtracted in 200 components = 0.00468923 Jy ! Clean residual min=-0.002758 max=0.002414 Jy/beam ! Clean residual mean=-0.000003 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.189737 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000199753 Jy ! Component: 100 - total flux cleaned = 0.000269396 Jy ! Component: 150 - total flux cleaned = 0.000269568 Jy ! Component: 200 - total flux cleaned = 0.000299447 Jy ! Total flux subtracted in 200 components = 0.000299447 Jy ! Clean residual min=-0.002652 max=0.002442 Jy/beam ! Clean residual mean=-0.000003 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.190037 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 83 components and 0.190037 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=6.25 mas, bpa=0.1864 degrees ! Estimated noise=699.998 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000475547 Jy ! Component: 100 - total flux cleaned = -0.000584735 Jy ! Component: 150 - total flux cleaned = -0.000677977 Jy ! Component: 200 - total flux cleaned = -0.000735585 Jy ! Total flux subtracted in 200 components = -0.000735585 Jy ! Clean residual min=-0.002325 max=0.002497 Jy/beam ! Clean residual mean=-0.000001 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.189301 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 92 components and 0.189301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074591Jy sigma=0.000906 ! Fit after self-cal, rms=0.074614Jy sigma=0.000906 wmodel J1735+0808_S_2014_01_04_pus_map.mod ! Writing 92 model components to file: J1735+0808_S_2014_01_04_pus_map.mod wobs J1735+0808_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1735+0808_S_2014_01_04_pus_uvs.fits wwins J1735+0808_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1735+0808_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000370621 Jy ! Component: 100 - total flux cleaned = 0.000332266 Jy ! Component: 150 - total flux cleaned = 0.000182978 Jy ! Component: 200 - total flux cleaned = 1.1119e-05 Jy ! Component: 250 - total flux cleaned = -0.000183302 Jy ! Component: 300 - total flux cleaned = -0.000275569 Jy ! Component: 350 - total flux cleaned = -0.000305024 Jy ! Component: 400 - total flux cleaned = -0.000276372 Jy ! Component: 450 - total flux cleaned = -0.000275735 Jy ! Component: 500 - total flux cleaned = -0.000405161 Jy ! Component: 550 - total flux cleaned = -0.000556916 Jy ! Component: 600 - total flux cleaned = -0.000704698 Jy ! Component: 650 - total flux cleaned = -0.000847727 Jy ! Component: 700 - total flux cleaned = -0.000917402 Jy ! Component: 750 - total flux cleaned = -0.00100753 Jy ! Component: 800 - total flux cleaned = -0.00103002 Jy ! Component: 850 - total flux cleaned = -0.00116045 Jy ! Component: 900 - total flux cleaned = -0.00124559 Jy ! Component: 950 - total flux cleaned = -0.0013502 Jy ! Component: 1000 - total flux cleaned = -0.00149329 Jy ! Component: 1050 - total flux cleaned = -0.00155324 Jy ! Component: 1100 - total flux cleaned = -0.00163186 Jy ! Component: 1150 - total flux cleaned = -0.00174688 Jy ! Component: 1200 - total flux cleaned = -0.00176582 Jy ! Component: 1250 - total flux cleaned = -0.00178442 Jy ! Component: 1300 - total flux cleaned = -0.00178418 Jy ! Component: 1350 - total flux cleaned = -0.00181986 Jy ! Component: 1400 - total flux cleaned = -0.00176675 Jy ! Component: 1450 - total flux cleaned = -0.00178411 Jy ! Component: 1500 - total flux cleaned = -0.0017841 Jy ! Component: 1550 - total flux cleaned = -0.00175038 Jy ! Component: 1600 - total flux cleaned = -0.00171744 Jy ! Component: 1650 - total flux cleaned = -0.00165205 Jy ! Component: 1700 - total flux cleaned = -0.00163602 Jy ! Component: 1750 - total flux cleaned = -0.00163612 Jy ! Component: 1800 - total flux cleaned = -0.00158828 Jy ! Component: 1850 - total flux cleaned = -0.00155704 Jy ! Component: 1900 - total flux cleaned = -0.0015415 Jy ! Component: 1950 - total flux cleaned = -0.00152593 Jy ! Component: 2000 - total flux cleaned = -0.00151056 Jy ! Component: 2050 - total flux cleaned = -0.00143582 Jy ! Component: 2100 - total flux cleaned = -0.00143584 Jy ! Component: 2150 - total flux cleaned = -0.00139189 Jy ! Component: 2200 - total flux cleaned = -0.0013628 Jy ! Component: 2250 - total flux cleaned = -0.00130532 Jy ! Component: 2300 - total flux cleaned = -0.00127695 Jy ! Component: 2350 - total flux cleaned = -0.00122078 Jy ! Component: 2400 - total flux cleaned = -0.00120701 Jy ! Component: 2450 - total flux cleaned = -0.00120708 Jy ! Component: 2500 - total flux cleaned = -0.00120689 Jy ! Component: 2550 - total flux cleaned = -0.00116625 Jy ! Component: 2600 - total flux cleaned = -0.00119318 Jy ! Component: 2650 - total flux cleaned = -0.00119317 Jy ! Component: 2700 - total flux cleaned = -0.00119316 Jy ! Component: 2750 - total flux cleaned = -0.00119317 Jy ! Component: 2800 - total flux cleaned = -0.00118007 Jy ! Component: 2850 - total flux cleaned = -0.00121905 Jy ! Component: 2900 - total flux cleaned = -0.00119324 Jy ! Component: 2950 - total flux cleaned = -0.00120606 Jy ! Component: 3000 - total flux cleaned = -0.00121884 Jy ! Component: 3050 - total flux cleaned = -0.00116824 Jy ! Component: 3100 - total flux cleaned = -0.00119353 Jy ! Component: 3150 - total flux cleaned = -0.00118099 Jy ! Component: 3200 - total flux cleaned = -0.00120596 Jy ! Component: 3250 - total flux cleaned = -0.0012308 Jy ! Component: 3300 - total flux cleaned = -0.00120607 Jy ! Component: 3350 - total flux cleaned = -0.00123073 Jy ! Component: 3400 - total flux cleaned = -0.0012308 Jy ! Component: 3450 - total flux cleaned = -0.00124308 Jy ! Component: 3500 - total flux cleaned = -0.00127964 Jy ! Component: 3550 - total flux cleaned = -0.00125533 Jy ! Component: 3600 - total flux cleaned = -0.00125535 Jy ! Component: 3650 - total flux cleaned = -0.00130367 Jy ! Component: 3700 - total flux cleaned = -0.00132773 Jy ! Component: 3750 - total flux cleaned = -0.00136371 Jy ! Component: 3800 - total flux cleaned = -0.00133976 Jy ! Component: 3850 - total flux cleaned = -0.00135175 Jy ! Component: 3900 - total flux cleaned = -0.00141137 Jy ! Component: 3950 - total flux cleaned = -0.00139954 Jy ! Component: 4000 - total flux cleaned = -0.0014589 Jy ! Component: 4050 - total flux cleaned = -0.00148268 Jy ! Total flux subtracted in 4096 components = -0.00151817 Jy ! Clean residual min=-0.000740 max=0.000752 Jy/beam ! Clean residual mean=0.000000 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.187783 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 346 components and 0.187783 Jy ![Exited script file: muppet] wmap "J1735+0808_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.285 x 6.25 at 0.1864 degrees (North through East) ! Clean map min=-0.0017346 max=0.15012 Jy/beam ! Writing clean map to FITS file: J1735+0808_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.150117 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000201839 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.403362 0.403362 0.806724 1.61345 3.2269 6.45379 12.9076 25.8152 51.6304 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.15 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.285 x 6.25 at 0.1864 degrees (North through East) ! Clean map min=-0.0017346 max=0.15012 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1735+0808_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:33:44 2017