! Started logfile: J1734+3857_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:31:25 2017 obs J1734+3857_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1734+3857_S_2015_01_23_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.733333 visibilities/baseline/integration-bin. ! Found source: J1734+3857 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 1848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1734+3857_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.341355Jy sigma=0.004390 ! Fit after self-cal, rms=0.329236Jy sigma=0.004240 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.711 mas, bmaj=9.019 mas, bpa=-35.13 degrees ! Estimated noise=1752.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.541185 Jy ! Component: 100 - total flux cleaned = 0.661932 Jy ! Total flux subtracted in 100 components = 0.661932 Jy ! Clean residual min=-0.032009 max=0.042182 Jy/beam ! Clean residual mean=0.000126 rms=0.008916 Jy/beam ! Combined flux in latest and established models = 0.661932 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.661932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147989Jy sigma=0.001627 ! Fit after self-cal, rms=0.147989Jy sigma=0.001627 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.134 mas, bmaj=9.085 mas, bpa=-34.08 degrees ! Estimated noise=1375.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.048574 Jy ! Component: 100 - total flux cleaned = 0.0787445 Jy ! Component: 150 - total flux cleaned = 0.099762 Jy ! Component: 200 - total flux cleaned = 0.116072 Jy ! Total flux subtracted in 200 components = 0.116072 Jy ! Clean residual min=-0.025007 max=0.028175 Jy/beam ! Clean residual mean=0.000064 rms=0.006810 Jy/beam ! Combined flux in latest and established models = 0.778004 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 35 components and 0.778004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126548Jy sigma=0.001387 ! Fit after self-cal, rms=0.126546Jy sigma=0.001386 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.96 KP 1.09 ! LA 0.94 MK 1.02 NL 0.97 OV 0.98 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.01 KP 1.03 ! LA 0.95 MK 1.00 NL 1.14 OV 1.00 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.03 KP 0.88 ! LA 0.77 MK 1.04 NL 1.43 OV 0.94 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 0.99 KP 0.83 ! LA 0.85 MK 1.03 NL 0.96 OV 0.90 ! PT 1.04 SC 0.98 ! ! ! Fit before self-cal, rms=0.126546Jy sigma=0.001386 ! Fit after self-cal, rms=0.073543Jy sigma=0.000824 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=9.119 mas, bpa=-34.01 degrees ! Estimated noise=1368.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0117972 Jy ! Component: 100 - total flux cleaned = -0.016934 Jy ! Component: 150 - total flux cleaned = -0.0175002 Jy ! Component: 200 - total flux cleaned = -0.0179344 Jy ! Total flux subtracted in 200 components = -0.0179344 Jy ! Clean residual min=-0.009015 max=0.006849 Jy/beam ! Clean residual mean=0.000003 rms=0.001951 Jy/beam ! Combined flux in latest and established models = 0.76007 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 48 components and 0.76007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071061Jy sigma=0.000802 ! Fit after self-cal, rms=0.071029Jy sigma=0.000801 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071029Jy sigma=0.000801 ! Fit after self-cal, rms=0.070240Jy sigma=0.000793 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=9.118 mas, bpa=-33.98 degrees ! Estimated noise=1365.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00676408 Jy ! Component: 100 - total flux cleaned = -0.00908841 Jy ! Component: 150 - total flux cleaned = -0.00930676 Jy ! Component: 200 - total flux cleaned = -0.00958081 Jy ! Total flux subtracted in 200 components = -0.00958081 Jy ! Clean residual min=-0.006469 max=0.005421 Jy/beam ! Clean residual mean=-0.000003 rms=0.001529 Jy/beam ! Combined flux in latest and established models = 0.750489 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 59 components and 0.750489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069426Jy sigma=0.000786 ! Fit after self-cal, rms=0.069435Jy sigma=0.000786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000158932 Jy ! Component: 100 - total flux cleaned = -0.000379773 Jy ! Component: 150 - total flux cleaned = -0.000514383 Jy ! Component: 200 - total flux cleaned = -0.000637627 Jy ! Total flux subtracted in 200 components = -0.000637627 Jy ! Clean residual min=-0.006184 max=0.005303 Jy/beam ! Clean residual mean=-0.000002 rms=0.001499 Jy/beam ! Combined flux in latest and established models = 0.749851 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 0.749852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069288Jy sigma=0.000785 ! Fit after self-cal, rms=0.069290Jy sigma=0.000785 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069290Jy sigma=0.000785 ! Fit after self-cal, rms=0.068989Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.189 mas, bmaj=9.116 mas, bpa=-33.96 degrees ! Estimated noise=1364.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00420955 Jy ! Component: 100 - total flux cleaned = -0.00586178 Jy ! Component: 150 - total flux cleaned = -0.00619594 Jy ! Component: 200 - total flux cleaned = -0.00643111 Jy ! Total flux subtracted in 200 components = -0.00643111 Jy ! Clean residual min=-0.004765 max=0.004690 Jy/beam ! Clean residual mean=-0.000004 rms=0.001273 Jy/beam ! Combined flux in latest and established models = 0.74342 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 0.74342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068674Jy sigma=0.000778 ! Fit after self-cal, rms=0.068679Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000106858 Jy ! Component: 100 - total flux cleaned = -0.000305265 Jy ! Component: 150 - total flux cleaned = -0.000440447 Jy ! Component: 200 - total flux cleaned = -0.000483808 Jy ! Total flux subtracted in 200 components = -0.000483808 Jy ! Clean residual min=-0.004602 max=0.004576 Jy/beam ! Clean residual mean=-0.000003 rms=0.001259 Jy/beam ! Combined flux in latest and established models = 0.742937 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.742937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068616Jy sigma=0.000777 ! Fit after self-cal, rms=0.068616Jy sigma=0.000777 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068616Jy sigma=0.000777 ! Fit after self-cal, rms=0.068510Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.259 mas, bmaj=9.816 mas, bpa=-34.5 degrees ! Estimated noise=1659.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00258254 Jy ! Component: 100 - total flux cleaned = -0.00369951 Jy ! Component: 150 - total flux cleaned = -0.00400024 Jy ! Component: 200 - total flux cleaned = -0.00397307 Jy ! Total flux subtracted in 200 components = -0.00397307 Jy ! Clean residual min=-0.005200 max=0.004533 Jy/beam ! Clean residual mean=-0.000011 rms=0.001482 Jy/beam ! Combined flux in latest and established models = 0.738963 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 83 components and 0.738963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068454Jy sigma=0.000775 ! Fit after self-cal, rms=0.068457Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.00539e-05 Jy ! Component: 100 - total flux cleaned = 6.81097e-05 Jy ! Component: 150 - total flux cleaned = 9.00457e-05 Jy ! Component: 200 - total flux cleaned = 0.000110439 Jy ! Total flux subtracted in 200 components = 0.000110439 Jy ! Clean residual min=-0.005212 max=0.004507 Jy/beam ! Clean residual mean=-0.000011 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 0.739074 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 87 components and 0.739074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068474Jy sigma=0.000776 ! Fit after self-cal, rms=0.068473Jy sigma=0.000776 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=9.117 mas, bpa=-33.95 degrees ! Estimated noise=1363.59 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.191 x 9.117 at -33.95 degrees (North through East) ! Clean map min=-0.0042098 max=0.68083 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068473Jy sigma=0.000776 ! Fit after self-cal, rms=0.063241Jy sigma=0.000709 ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=9.125 mas, bpa=-33.94 degrees ! Estimated noise=1362.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0023377 Jy ! Component: 100 - total flux cleaned = -0.00341814 Jy ! Component: 150 - total flux cleaned = -0.00371224 Jy ! Component: 200 - total flux cleaned = -0.00379838 Jy ! Total flux subtracted in 200 components = -0.00379838 Jy ! Clean residual min=-0.003988 max=0.004246 Jy/beam ! Clean residual mean=-0.000004 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 0.735276 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 92 components and 0.735276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063112Jy sigma=0.000708 ! Fit after self-cal, rms=0.063110Jy sigma=0.000708 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000140389 Jy ! Component: 100 - total flux cleaned = -0.000138321 Jy ! Component: 150 - total flux cleaned = -0.000203424 Jy ! Component: 200 - total flux cleaned = -0.000263228 Jy ! Total flux subtracted in 200 components = -0.000263228 Jy ! Clean residual min=-0.003809 max=0.004164 Jy/beam ! Clean residual mean=-0.000004 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.735012 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 95 components and 0.735012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063071Jy sigma=0.000707 ! Fit after self-cal, rms=0.063072Jy sigma=0.000707 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063072Jy sigma=0.000707 ! Fit after self-cal, rms=0.063043Jy sigma=0.000707 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.755 mas, bmaj=9.034 mas, bpa=-35.04 degrees ! Estimated noise=1724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.532287 Jy ! Component: 100 - total flux cleaned = 0.648743 Jy ! Component: 150 - total flux cleaned = 0.685326 Jy ! Component: 200 - total flux cleaned = 0.70224 Jy ! Total flux subtracted in 200 components = 0.70224 Jy ! Clean residual min=-0.006728 max=0.008944 Jy/beam ! Clean residual mean=0.000028 rms=0.002127 Jy/beam ! Combined flux in latest and established models = 0.70224 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.70224 Jy ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=9.126 mas, bpa=-33.94 degrees ! Estimated noise=1362.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-36.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00868641 Jy ! Component: 100 - total flux cleaned = 0.0134994 Jy ! Component: 150 - total flux cleaned = 0.0163668 Jy ! Component: 200 - total flux cleaned = 0.0185395 Jy ! Total flux subtracted in 200 components = 0.0185395 Jy ! Clean residual min=-0.004150 max=0.005118 Jy/beam ! Clean residual mean=0.000008 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.720779 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 40 components and 0.720779 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.27 mas, bmaj=9.825 mas, bpa=-34.43 degrees ! Estimated noise=1656.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00424461 Jy ! Component: 100 - total flux cleaned = 0.00695288 Jy ! Component: 150 - total flux cleaned = 0.00851065 Jy ! Component: 200 - total flux cleaned = 0.00933137 Jy ! Total flux subtracted in 200 components = 0.00933137 Jy ! Clean residual min=-0.004750 max=0.004741 Jy/beam ! Clean residual mean=-0.000005 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 0.730111 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000435741 Jy ! Component: 100 - total flux cleaned = 0.000731657 Jy ! Component: 150 - total flux cleaned = 0.00095726 Jy ! Component: 200 - total flux cleaned = 0.00112704 Jy ! Total flux subtracted in 200 components = 0.00112704 Jy ! Clean residual min=-0.004712 max=0.004571 Jy/beam ! Clean residual mean=-0.000006 rms=0.001248 Jy/beam ! Combined flux in latest and established models = 0.731238 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 86 components and 0.731238 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=9.126 mas, bpa=-33.94 degrees ! Estimated noise=1362.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150535 Jy ! Component: 100 - total flux cleaned = -0.00132263 Jy ! Component: 150 - total flux cleaned = -0.00124119 Jy ! Component: 200 - total flux cleaned = -0.00123583 Jy ! Total flux subtracted in 200 components = -0.00123583 Jy ! Clean residual min=-0.003540 max=0.003944 Jy/beam ! Clean residual mean=-0.000001 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 0.730002 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 100 components and 0.730002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062949Jy sigma=0.000706 ! Fit after self-cal, rms=0.062918Jy sigma=0.000705 wmodel J1734+3857_S_2015_01_23_pus_map.mod ! Writing 100 model components to file: J1734+3857_S_2015_01_23_pus_map.mod wobs J1734+3857_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1734+3857_S_2015_01_23_pus_uvs.fits wwins J1734+3857_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J1734+3857_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144224 Jy ! Component: 100 - total flux cleaned = 0.00208508 Jy ! Component: 150 - total flux cleaned = 0.00275271 Jy ! Component: 200 - total flux cleaned = 0.00332825 Jy ! Component: 250 - total flux cleaned = 0.00371188 Jy ! Component: 300 - total flux cleaned = 0.00392239 Jy ! Component: 350 - total flux cleaned = 0.00417521 Jy ! Component: 400 - total flux cleaned = 0.00417574 Jy ! Component: 450 - total flux cleaned = 0.00412922 Jy ! Component: 500 - total flux cleaned = 0.00408286 Jy ! Component: 550 - total flux cleaned = 0.00412596 Jy ! Component: 600 - total flux cleaned = 0.00408219 Jy ! Component: 650 - total flux cleaned = 0.00416577 Jy ! Component: 700 - total flux cleaned = 0.00420607 Jy ! Component: 750 - total flux cleaned = 0.00412708 Jy ! Component: 800 - total flux cleaned = 0.00416505 Jy ! Component: 850 - total flux cleaned = 0.00405123 Jy ! Component: 900 - total flux cleaned = 0.00397763 Jy ! Component: 950 - total flux cleaned = 0.00401506 Jy ! Component: 1000 - total flux cleaned = 0.00401531 Jy ! Component: 1050 - total flux cleaned = 0.00394588 Jy ! Component: 1100 - total flux cleaned = 0.00380962 Jy ! Component: 1150 - total flux cleaned = 0.00377598 Jy ! Component: 1200 - total flux cleaned = 0.00371017 Jy ! Component: 1250 - total flux cleaned = 0.00364578 Jy ! Component: 1300 - total flux cleaned = 0.00361346 Jy ! Component: 1350 - total flux cleaned = 0.0035196 Jy ! Component: 1400 - total flux cleaned = 0.00351973 Jy ! Component: 1450 - total flux cleaned = 0.00361005 Jy ! Component: 1500 - total flux cleaned = 0.00352025 Jy ! Component: 1550 - total flux cleaned = 0.0034317 Jy ! Component: 1600 - total flux cleaned = 0.00334452 Jy ! Component: 1650 - total flux cleaned = 0.0032591 Jy ! Component: 1700 - total flux cleaned = 0.00317475 Jy ! Component: 1750 - total flux cleaned = 0.00317494 Jy ! Component: 1800 - total flux cleaned = 0.00309295 Jy ! Component: 1850 - total flux cleaned = 0.00317401 Jy ! Component: 1900 - total flux cleaned = 0.0031737 Jy ! Component: 1950 - total flux cleaned = 0.00314699 Jy ! Component: 2000 - total flux cleaned = 0.00319891 Jy ! Component: 2050 - total flux cleaned = 0.0031731 Jy ! Component: 2100 - total flux cleaned = 0.00317347 Jy ! Component: 2150 - total flux cleaned = 0.00324902 Jy ! Component: 2200 - total flux cleaned = 0.00327372 Jy ! Component: 2250 - total flux cleaned = 0.00334758 Jy ! Component: 2300 - total flux cleaned = 0.0033471 Jy ! Component: 2350 - total flux cleaned = 0.00337107 Jy ! Component: 2400 - total flux cleaned = 0.0033948 Jy ! Component: 2450 - total flux cleaned = 0.00339471 Jy ! Component: 2500 - total flux cleaned = 0.00348812 Jy ! Component: 2550 - total flux cleaned = 0.00351111 Jy ! Component: 2600 - total flux cleaned = 0.00355707 Jy ! Component: 2650 - total flux cleaned = 0.00364817 Jy ! Component: 2700 - total flux cleaned = 0.00367066 Jy ! Component: 2750 - total flux cleaned = 0.00373792 Jy ! Component: 2800 - total flux cleaned = 0.003738 Jy ! Component: 2850 - total flux cleaned = 0.00378225 Jy ! Component: 2900 - total flux cleaned = 0.00384799 Jy ! Component: 2950 - total flux cleaned = 0.00395631 Jy ! Component: 3000 - total flux cleaned = 0.00399932 Jy ! Component: 3050 - total flux cleaned = 0.00408459 Jy ! Component: 3100 - total flux cleaned = 0.00408451 Jy ! Component: 3150 - total flux cleaned = 0.00406362 Jy ! Component: 3200 - total flux cleaned = 0.00412635 Jy ! Component: 3250 - total flux cleaned = 0.00416789 Jy ! Component: 3300 - total flux cleaned = 0.00420909 Jy ! Component: 3350 - total flux cleaned = 0.00424995 Jy ! Component: 3400 - total flux cleaned = 0.00429055 Jy ! Component: 3450 - total flux cleaned = 0.0043107 Jy ! Component: 3500 - total flux cleaned = 0.00437077 Jy ! Component: 3550 - total flux cleaned = 0.00439048 Jy ! Component: 3600 - total flux cleaned = 0.00437081 Jy ! Component: 3650 - total flux cleaned = 0.00441002 Jy ! Component: 3700 - total flux cleaned = 0.00437091 Jy ! Component: 3750 - total flux cleaned = 0.00442921 Jy ! Component: 3800 - total flux cleaned = 0.00442898 Jy ! Component: 3850 - total flux cleaned = 0.00444815 Jy ! Component: 3900 - total flux cleaned = 0.00448644 Jy ! Component: 3950 - total flux cleaned = 0.00442935 Jy ! Component: 4000 - total flux cleaned = 0.00450504 Jy ! Component: 4050 - total flux cleaned = 0.00448623 Jy ! Total flux subtracted in 4096 components = 0.00452377 Jy ! Clean residual min=-0.001014 max=0.001129 Jy/beam ! Clean residual mean=-0.000002 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.734526 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 347 components and 0.734526 Jy ![Exited script file: muppet] wmap "J1734+3857_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.191 x 9.126 at -33.94 degrees (North through East) ! Clean map min=-0.0022643 max=0.68023 Jy/beam ! Writing clean map to FITS file: J1734+3857_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.680229 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000314412 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.138664 0.138664 0.277329 0.554657 1.10931 2.21863 4.43726 8.87451 17.749 35.4981 70.9961 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.68 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.191 x 9.126 at -33.94 degrees (North through East) ! Clean map min=-0.0022643 max=0.68023 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1734+3857_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:31:29 2017