! Started logfile: J1733-1304_S_2015_01_22_pus_uvs.log on Tue Jan 3 23:01:18 2017 obs J1733-1304_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1733-1304_S_2015_01_22_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1733-1304 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 2304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1733-1304_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.138630Jy sigma=0.012390 ! Fit after self-cal, rms=1.106955Jy sigma=0.012086 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.394 mas, bmaj=6.262 mas, bpa=-5.345 degrees ! Estimated noise=1861.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.31288 Jy ! Component: 100 - total flux cleaned = 1.70889 Jy ! Total flux subtracted in 100 components = 1.70889 Jy ! Clean residual min=-0.163520 max=0.272014 Jy/beam ! Clean residual mean=0.000934 rms=0.054894 Jy/beam ! Combined flux in latest and established models = 1.70889 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.70889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.760828Jy sigma=0.008055 ! Fit after self-cal, rms=0.760746Jy sigma=0.008053 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=7.292 mas, bpa=-5.821 degrees ! Estimated noise=1467.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.291779 Jy ! Component: 100 - total flux cleaned = 0.443113 Jy ! Component: 150 - total flux cleaned = 0.53131 Jy ! Component: 200 - total flux cleaned = 0.586103 Jy ! Total flux subtracted in 200 components = 0.586103 Jy ! Clean residual min=-0.188317 max=0.291169 Jy/beam ! Clean residual mean=0.000645 rms=0.068170 Jy/beam ! Combined flux in latest and established models = 2.29499 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 36 components and 2.29499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.679294Jy sigma=0.006629 ! Fit after self-cal, rms=0.679092Jy sigma=0.006624 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.94 KP 0.97 ! LA 2.21 MK 1.02 NL 0.96 OV 0.88 ! PT 0.87 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 0.99 KP 0.88 ! LA 2.18 MK 0.99 NL 1.00 OV 0.91 ! PT 0.86 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.00 KP 0.78 ! LA 1.81 MK 1.01 NL 1.05 OV 0.84 ! PT 0.84 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 0.94 KP 0.72 ! LA 1.97 MK 0.96 NL 1.01 OV 0.92 ! PT 0.89 SC 0.99 ! ! ! Fit before self-cal, rms=0.679092Jy sigma=0.006624 ! Fit after self-cal, rms=0.380178Jy sigma=0.003974 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.834 mas, bmaj=7.394 mas, bpa=-6.374 degrees ! Estimated noise=1447.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, 23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.24319 Jy ! Component: 100 - total flux cleaned = 0.353935 Jy ! Component: 150 - total flux cleaned = 0.414179 Jy ! Component: 200 - total flux cleaned = 0.45576 Jy ! Total flux subtracted in 200 components = 0.45576 Jy ! Clean residual min=-0.054841 max=0.051882 Jy/beam ! Clean residual mean=0.000109 rms=0.013216 Jy/beam ! Combined flux in latest and established models = 2.75075 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 75 components and 2.75075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186123Jy sigma=0.001740 ! Fit after self-cal, rms=0.183675Jy sigma=0.001691 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183675Jy sigma=0.001691 ! Fit after self-cal, rms=0.168595Jy sigma=0.001557 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=7.375 mas, bpa=-6.642 degrees ! Estimated noise=1419.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0448379 Jy ! Component: 100 - total flux cleaned = 0.0735122 Jy ! Component: 150 - total flux cleaned = 0.0897489 Jy ! Component: 200 - total flux cleaned = 0.0916717 Jy ! Total flux subtracted in 200 components = 0.0916717 Jy ! Clean residual min=-0.037906 max=0.036267 Jy/beam ! Clean residual mean=0.000030 rms=0.008268 Jy/beam ! Combined flux in latest and established models = 2.84242 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 95 components and 2.84242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152761Jy sigma=0.001372 ! Fit after self-cal, rms=0.152261Jy sigma=0.001352 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179391 Jy ! Component: 100 - total flux cleaned = 0.0242955 Jy ! Component: 150 - total flux cleaned = 0.0247286 Jy ! Component: 200 - total flux cleaned = 0.0247399 Jy ! Total flux subtracted in 200 components = 0.0247399 Jy ! Clean residual min=-0.034209 max=0.029501 Jy/beam ! Clean residual mean=0.000028 rms=0.007359 Jy/beam ! Combined flux in latest and established models = 2.86716 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 107 components and 2.86716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148620Jy sigma=0.001310 ! Fit after self-cal, rms=0.148755Jy sigma=0.001306 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148755Jy sigma=0.001306 ! Fit after self-cal, rms=0.146806Jy sigma=0.001274 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=7.363 mas, bpa=-6.698 degrees ! Estimated noise=1417.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177576 Jy ! Component: 100 - total flux cleaned = 0.026158 Jy ! Component: 150 - total flux cleaned = 0.0289523 Jy ! Component: 200 - total flux cleaned = 0.0296454 Jy ! Total flux subtracted in 200 components = 0.0296454 Jy ! Clean residual min=-0.028069 max=0.026694 Jy/beam ! Clean residual mean=0.000025 rms=0.006236 Jy/beam ! Combined flux in latest and established models = 2.89681 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 118 components and 2.89681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143291Jy sigma=0.001238 ! Fit after self-cal, rms=0.143390Jy sigma=0.001234 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00661525 Jy ! Component: 100 - total flux cleaned = 0.00818148 Jy ! Component: 150 - total flux cleaned = 0.00902724 Jy ! Component: 200 - total flux cleaned = 0.00955381 Jy ! Total flux subtracted in 200 components = 0.00955381 Jy ! Clean residual min=-0.026079 max=0.024739 Jy/beam ! Clean residual mean=0.000025 rms=0.005954 Jy/beam ! Combined flux in latest and established models = 2.90636 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 124 components and 2.90636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141955Jy sigma=0.001220 ! Fit after self-cal, rms=0.142086Jy sigma=0.001219 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142086Jy sigma=0.001219 ! Fit after self-cal, rms=0.141819Jy sigma=0.001211 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.811 mas, bmaj=13.4 mas, bpa=-5.824 degrees ! Estimated noise=1965.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133595 Jy ! Component: 100 - total flux cleaned = 0.0155448 Jy ! Component: 150 - total flux cleaned = 0.0165139 Jy ! Component: 200 - total flux cleaned = 0.0168216 Jy ! Total flux subtracted in 200 components = 0.0168216 Jy ! Clean residual min=-0.027792 max=0.028081 Jy/beam ! Clean residual mean=0.000037 rms=0.009199 Jy/beam ! Combined flux in latest and established models = 2.92318 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 137 components and 2.92318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141632Jy sigma=0.001207 ! Fit after self-cal, rms=0.141477Jy sigma=0.001203 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191652 Jy ! Component: 100 - total flux cleaned = 0.00380814 Jy ! Component: 150 - total flux cleaned = 0.00492818 Jy ! Component: 200 - total flux cleaned = 0.00507085 Jy ! Total flux subtracted in 200 components = 0.00507085 Jy ! Clean residual min=-0.027438 max=0.027912 Jy/beam ! Clean residual mean=0.000036 rms=0.008862 Jy/beam ! Combined flux in latest and established models = 2.92825 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 148 components and 2.92825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141728Jy sigma=0.001207 ! Fit after self-cal, rms=0.141530Jy sigma=0.001204 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=7.357 mas, bpa=-6.731 degrees ! Estimated noise=1416.27 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.818 x 7.357 at -6.731 degrees (North through East) ! Clean map min=-0.02385 max=1.7547 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141530Jy sigma=0.001204 ! Fit after self-cal, rms=0.121430Jy sigma=0.000948 ! Inverting map and beam ! Estimated beam: bmin=2.82 mas, bmaj=7.36 mas, bpa=-6.707 degrees ! Estimated noise=1419.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032762 Jy ! Component: 100 - total flux cleaned = 0.00532847 Jy ! Component: 150 - total flux cleaned = 0.00682197 Jy ! Component: 200 - total flux cleaned = 0.0081676 Jy ! Total flux subtracted in 200 components = 0.0081676 Jy ! Clean residual min=-0.022072 max=0.022786 Jy/beam ! Clean residual mean=0.000026 rms=0.005318 Jy/beam ! Combined flux in latest and established models = 2.93642 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 162 components and 2.93642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119585Jy sigma=0.000924 ! Fit after self-cal, rms=0.119660Jy sigma=0.000923 ! Inverting map ! Added new window around map position (-13, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183858 Jy ! Component: 100 - total flux cleaned = 0.0223446 Jy ! Component: 150 - total flux cleaned = 0.02395 Jy ! Component: 200 - total flux cleaned = 0.0246432 Jy ! Total flux subtracted in 200 components = 0.0246432 Jy ! Clean residual min=-0.018689 max=0.020224 Jy/beam ! Clean residual mean=0.000017 rms=0.004238 Jy/beam ! Combined flux in latest and established models = 2.96106 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 191 components and 2.96106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115045Jy sigma=0.000852 ! Fit after self-cal, rms=0.115010Jy sigma=0.000851 ! Inverting map ! Added new window around map position (19, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171223 Jy ! Component: 100 - total flux cleaned = 0.0248363 Jy ! Component: 150 - total flux cleaned = 0.0313187 Jy ! Component: 200 - total flux cleaned = 0.036923 Jy ! Total flux subtracted in 200 components = 0.036923 Jy ! Clean residual min=-0.015438 max=0.012786 Jy/beam ! Clean residual mean=0.000013 rms=0.003267 Jy/beam ! Combined flux in latest and established models = 2.99799 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 219 components and 2.99799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112050Jy sigma=0.000795 ! Fit after self-cal, rms=0.112018Jy sigma=0.000793 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112018Jy sigma=0.000793 ! Fit after self-cal, rms=0.111748Jy sigma=0.000791 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.399 mas, bmaj=6.349 mas, bpa=-6.18 degrees ! Estimated noise=1789.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.26396 Jy ! Component: 100 - total flux cleaned = 1.65031 Jy ! Component: 150 - total flux cleaned = 1.8757 Jy ! Component: 200 - total flux cleaned = 2.04145 Jy ! Total flux subtracted in 200 components = 2.04145 Jy ! Clean residual min=-0.069448 max=0.110992 Jy/beam ! Clean residual mean=0.000359 rms=0.025891 Jy/beam ! Combined flux in latest and established models = 2.04145 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 2.04145 Jy ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=7.362 mas, bpa=-6.701 degrees ! Estimated noise=1416.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.201524 Jy ! Component: 100 - total flux cleaned = 0.347997 Jy ! Component: 150 - total flux cleaned = 0.458305 Jy ! Component: 200 - total flux cleaned = 0.5437 Jy ! Total flux subtracted in 200 components = 0.5437 Jy ! Clean residual min=-0.041905 max=0.061997 Jy/beam ! Clean residual mean=0.000172 rms=0.016386 Jy/beam ! Combined flux in latest and established models = 2.58515 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 74 components and 2.58515 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.805 mas, bmaj=13.41 mas, bpa=-5.812 degrees ! Estimated noise=1966.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.128577 Jy ! Component: 100 - total flux cleaned = 0.201519 Jy ! Component: 150 - total flux cleaned = 0.248536 Jy ! Component: 200 - total flux cleaned = 0.281464 Jy ! Total flux subtracted in 200 components = 0.281464 Jy ! Clean residual min=-0.031976 max=0.028560 Jy/beam ! Clean residual mean=0.000086 rms=0.010372 Jy/beam ! Combined flux in latest and established models = 2.86661 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260936 Jy ! Component: 100 - total flux cleaned = 0.0443388 Jy ! Component: 150 - total flux cleaned = 0.0581863 Jy ! Component: 200 - total flux cleaned = 0.0700075 Jy ! Total flux subtracted in 200 components = 0.0700075 Jy ! Clean residual min=-0.021506 max=0.015914 Jy/beam ! Clean residual mean=0.000032 rms=0.006304 Jy/beam ! Combined flux in latest and established models = 2.93662 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 153 components and 2.93662 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=7.362 mas, bpa=-6.701 degrees ! Estimated noise=1416.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227382 Jy ! Component: 100 - total flux cleaned = 0.0334144 Jy ! Component: 150 - total flux cleaned = 0.0393829 Jy ! Component: 200 - total flux cleaned = 0.0426276 Jy ! Total flux subtracted in 200 components = 0.0426276 Jy ! Clean residual min=-0.016576 max=0.019001 Jy/beam ! Clean residual mean=0.000006 rms=0.004180 Jy/beam ! Combined flux in latest and established models = 2.97925 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 174 components and 2.97925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117481Jy sigma=0.000881 ! Fit after self-cal, rms=0.116596Jy sigma=0.000870 wmodel J1733-1304_S_2015_01_22_pus_map.mod ! Writing 174 model components to file: J1733-1304_S_2015_01_22_pus_map.mod wobs J1733-1304_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1733-1304_S_2015_01_22_pus_uvs.fits wwins J1733-1304_S_2015_01_22_pus_map.win ! wwins: Wrote 4 windows to J1733-1304_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00683998 Jy ! Component: 100 - total flux cleaned = 0.00741317 Jy ! Component: 150 - total flux cleaned = 0.00690787 Jy ! Component: 200 - total flux cleaned = 0.00574433 Jy ! Component: 250 - total flux cleaned = 0.00486736 Jy ! Component: 300 - total flux cleaned = 0.00426034 Jy ! Component: 350 - total flux cleaned = 0.00309247 Jy ! Component: 400 - total flux cleaned = 0.00216102 Jy ! Component: 450 - total flux cleaned = 0.000747719 Jy ! Component: 500 - total flux cleaned = -8.97293e-05 Jy ! Component: 550 - total flux cleaned = -0.00105948 Jy ! Component: 600 - total flux cleaned = -0.00167461 Jy ! Component: 650 - total flux cleaned = -0.00197459 Jy ! Component: 700 - total flux cleaned = -0.00311043 Jy ! Component: 750 - total flux cleaned = -0.00365154 Jy ! Component: 800 - total flux cleaned = -0.00404233 Jy ! Component: 850 - total flux cleaned = -0.0049295 Jy ! Component: 900 - total flux cleaned = -0.00578272 Jy ! Component: 950 - total flux cleaned = -0.0062538 Jy ! Component: 1000 - total flux cleaned = -0.00682289 Jy ! Component: 1050 - total flux cleaned = -0.00704098 Jy ! Component: 1100 - total flux cleaned = -0.00714647 Jy ! Component: 1150 - total flux cleaned = -0.00735516 Jy ! Component: 1200 - total flux cleaned = -0.00745502 Jy ! Component: 1250 - total flux cleaned = -0.00726097 Jy ! Component: 1300 - total flux cleaned = -0.00726389 Jy ! Component: 1350 - total flux cleaned = -0.00744829 Jy ! Component: 1400 - total flux cleaned = -0.00762634 Jy ! Component: 1450 - total flux cleaned = -0.00797613 Jy ! Component: 1500 - total flux cleaned = -0.00797737 Jy ! Component: 1550 - total flux cleaned = -0.00831138 Jy ! Component: 1600 - total flux cleaned = -0.00855296 Jy ! Component: 1650 - total flux cleaned = -0.0085538 Jy ! Component: 1700 - total flux cleaned = -0.00855487 Jy ! Component: 1750 - total flux cleaned = -0.00855743 Jy ! Component: 1800 - total flux cleaned = -0.00870376 Jy ! Component: 1850 - total flux cleaned = -0.00877382 Jy ! Component: 1900 - total flux cleaned = -0.00884281 Jy ! Component: 1950 - total flux cleaned = -0.00904658 Jy ! Component: 2000 - total flux cleaned = -0.00924765 Jy ! Component: 2050 - total flux cleaned = -0.00944291 Jy ! Component: 2100 - total flux cleaned = -0.00957086 Jy ! Component: 2150 - total flux cleaned = -0.00963575 Jy ! Component: 2200 - total flux cleaned = -0.00994126 Jy ! Component: 2250 - total flux cleaned = -0.0100615 Jy ! Component: 2300 - total flux cleaned = -0.0103539 Jy ! Component: 2350 - total flux cleaned = -0.0102961 Jy ! Component: 2400 - total flux cleaned = -0.0102958 Jy ! Component: 2450 - total flux cleaned = -0.0102971 Jy ! Component: 2500 - total flux cleaned = -0.0105673 Jy ! Component: 2550 - total flux cleaned = -0.0105668 Jy ! Component: 2600 - total flux cleaned = -0.0106707 Jy ! Component: 2650 - total flux cleaned = -0.0106704 Jy ! Component: 2700 - total flux cleaned = -0.0105696 Jy ! Component: 2750 - total flux cleaned = -0.0104207 Jy ! Component: 2800 - total flux cleaned = -0.0104702 Jy ! Component: 2850 - total flux cleaned = -0.010374 Jy ! Component: 2900 - total flux cleaned = -0.0103266 Jy ! Component: 2950 - total flux cleaned = -0.0104187 Jy ! Component: 3000 - total flux cleaned = -0.0103723 Jy ! Component: 3050 - total flux cleaned = -0.0103722 Jy ! Component: 3100 - total flux cleaned = -0.0102827 Jy ! Component: 3150 - total flux cleaned = -0.0102388 Jy ! Component: 3200 - total flux cleaned = -0.0101096 Jy ! Component: 3250 - total flux cleaned = -0.0101098 Jy ! Component: 3300 - total flux cleaned = -0.0102787 Jy ! Component: 3350 - total flux cleaned = -0.0103202 Jy ! Component: 3400 - total flux cleaned = -0.0101972 Jy ! Component: 3450 - total flux cleaned = -0.0102375 Jy ! Component: 3500 - total flux cleaned = -0.0101973 Jy ! Component: 3550 - total flux cleaned = -0.0102758 Jy ! Component: 3600 - total flux cleaned = -0.0101586 Jy ! Component: 3650 - total flux cleaned = -0.0102354 Jy ! Component: 3700 - total flux cleaned = -0.010235 Jy ! Component: 3750 - total flux cleaned = -0.01031 Jy ! Component: 3800 - total flux cleaned = -0.0103468 Jy ! Component: 3850 - total flux cleaned = -0.0104204 Jy ! Component: 3900 - total flux cleaned = -0.010493 Jy ! Component: 3950 - total flux cleaned = -0.0105286 Jy ! Component: 4000 - total flux cleaned = -0.0104927 Jy ! Component: 4050 - total flux cleaned = -0.0105281 Jy ! Total flux subtracted in 4096 components = -0.0105633 Jy ! Clean residual min=-0.001969 max=0.001856 Jy/beam ! Clean residual mean=0.000002 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 2.96869 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 445 components and 2.96868 Jy ![Exited script file: muppet] wmap "J1733-1304_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.819 x 7.362 at -6.701 degrees (North through East) ! Clean map min=-0.0076268 max=1.7665 Jy/beam ! Writing clean map to FITS file: J1733-1304_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.76649 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000588332 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0999153 0.0999153 0.199831 0.399661 0.799322 1.59864 3.19729 6.39458 12.7892 25.5783 51.1566 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.766 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.819 x 7.362 at -6.701 degrees (North through East) ! Clean map min=-0.0076268 max=1.7665 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1733-1304_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 23:01:23 2017