! Started logfile: J1733-1304_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:33:28 2017 obs J1733-1304_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1733-1304_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.425926 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1733-1304 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 3680 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1733-1304_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.248907Jy sigma=0.013910 ! Fit after self-cal, rms=1.200599Jy sigma=0.013190 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.56 mas, bmaj=5.586 mas, bpa=1.062 degrees ! Estimated noise=1354.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.24053 Jy ! Component: 100 - total flux cleaned = 1.59974 Jy ! Total flux subtracted in 100 components = 1.59974 Jy ! Clean residual min=-0.151730 max=0.184655 Jy/beam ! Clean residual mean=0.000659 rms=0.044817 Jy/beam ! Combined flux in latest and established models = 1.59974 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 1.59974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.853880Jy sigma=0.009135 ! Fit after self-cal, rms=0.854438Jy sigma=0.009119 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=6.629 mas, bpa=-3.891 degrees ! Estimated noise=945.824 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.347684 Jy ! Component: 100 - total flux cleaned = 0.533036 Jy ! Component: 150 - total flux cleaned = 0.64844 Jy ! Component: 200 - total flux cleaned = 0.723131 Jy ! Total flux subtracted in 200 components = 0.723131 Jy ! Clean residual min=-0.198381 max=0.333254 Jy/beam ! Clean residual mean=0.000879 rms=0.067654 Jy/beam ! Combined flux in latest and established models = 2.32287 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 55 components and 2.32287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.626622Jy sigma=0.008079 ! Fit after self-cal, rms=0.627486Jy sigma=0.008067 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 1.00* KP 1.00* LA 0.86 ! MK 1.08 NL 0.91 OV 0.90 PT 0.89 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.56 FD 1.00* KP 1.00* LA 0.84 ! MK 1.05 NL 0.98 OV 0.92 PT 0.89 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.50 FD 1.00* KP 1.00* LA 0.69 ! MK 1.05 NL 0.94 OV 0.85 PT 0.88 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 1.00* KP 1.00* LA 0.75 ! MK 1.00 NL 1.03 OV 0.93 PT 0.89 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.627486Jy sigma=0.008067 ! Fit after self-cal, rms=0.404823Jy sigma=0.005138 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=6.917 mas, bpa=-3.529 degrees ! Estimated noise=965.677 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00552644 Jy ! Component: 100 - total flux cleaned = 0.00738861 Jy ! Component: 150 - total flux cleaned = 0.0106519 Jy ! Component: 200 - total flux cleaned = 0.0121578 Jy ! Total flux subtracted in 200 components = 0.0121578 Jy ! Clean residual min=-0.124981 max=0.202379 Jy/beam ! Clean residual mean=0.000306 rms=0.040382 Jy/beam ! Combined flux in latest and established models = 2.33503 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 2.33503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388028Jy sigma=0.005007 ! Fit after self-cal, rms=0.387194Jy sigma=0.004986 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.387194Jy sigma=0.004986 ! Fit after self-cal, rms=0.330143Jy sigma=0.004056 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=6.9 mas, bpa=-4.017 degrees ! Estimated noise=956.824 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00987331 Jy ! Component: 100 - total flux cleaned = -0.00782132 Jy ! Component: 150 - total flux cleaned = -0.00594621 Jy ! Component: 200 - total flux cleaned = -0.0050874 Jy ! Total flux subtracted in 200 components = -0.0050874 Jy ! Clean residual min=-0.097726 max=0.177060 Jy/beam ! Clean residual mean=0.000271 rms=0.030916 Jy/beam ! Combined flux in latest and established models = 2.32994 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 65 components and 2.32994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.323919Jy sigma=0.004002 ! Fit after self-cal, rms=0.324108Jy sigma=0.004001 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 25). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159546 Jy ! Component: 100 - total flux cleaned = 0.235879 Jy ! Component: 150 - total flux cleaned = 0.254779 Jy ! Component: 200 - total flux cleaned = 0.26095 Jy ! Total flux subtracted in 200 components = 0.26095 Jy ! Clean residual min=-0.076268 max=0.087203 Jy/beam ! Clean residual mean=0.000018 rms=0.019749 Jy/beam ! Combined flux in latest and established models = 2.59089 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 93 components and 2.5909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241916Jy sigma=0.002858 ! Fit after self-cal, rms=0.235692Jy sigma=0.002781 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235692Jy sigma=0.002781 ! Fit after self-cal, rms=0.193252Jy sigma=0.002417 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.111 mas, bmaj=6.924 mas, bpa=-4.414 degrees ! Estimated noise=939.274 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0745272 Jy ! Component: 100 - total flux cleaned = 0.103724 Jy ! Component: 150 - total flux cleaned = 0.110502 Jy ! Component: 200 - total flux cleaned = 0.113192 Jy ! Total flux subtracted in 200 components = 0.113192 Jy ! Clean residual min=-0.049843 max=0.049879 Jy/beam ! Clean residual mean=0.000008 rms=0.011480 Jy/beam ! Combined flux in latest and established models = 2.70409 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 125 components and 2.70409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162870Jy sigma=0.001975 ! Fit after self-cal, rms=0.161032Jy sigma=0.001953 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138345 Jy ! Component: 100 - total flux cleaned = 0.0186703 Jy ! Component: 150 - total flux cleaned = 0.0218188 Jy ! Component: 200 - total flux cleaned = 0.0223959 Jy ! Total flux subtracted in 200 components = 0.0223959 Jy ! Clean residual min=-0.046955 max=0.045808 Jy/beam ! Clean residual mean=-0.000013 rms=0.010691 Jy/beam ! Combined flux in latest and established models = 2.72648 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 140 components and 2.72648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155465Jy sigma=0.001885 ! Fit after self-cal, rms=0.155053Jy sigma=0.001882 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155053Jy sigma=0.001882 ! Fit after self-cal, rms=0.144666Jy sigma=0.001736 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.253 mas, bmaj=13.99 mas, bpa=3.989 degrees ! Estimated noise=1122.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.044334 Jy ! Component: 100 - total flux cleaned = 0.05767 Jy ! Component: 150 - total flux cleaned = 0.0592477 Jy ! Component: 200 - total flux cleaned = 0.0601269 Jy ! Total flux subtracted in 200 components = 0.0601269 Jy ! Clean residual min=-0.033370 max=0.034380 Jy/beam ! Clean residual mean=-0.000018 rms=0.009753 Jy/beam ! Combined flux in latest and established models = 2.78661 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 167 components and 2.78661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141008Jy sigma=0.001654 ! Fit after self-cal, rms=0.139658Jy sigma=0.001645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00760865 Jy ! Component: 100 - total flux cleaned = 0.00873976 Jy ! Component: 150 - total flux cleaned = 0.00905618 Jy ! Component: 200 - total flux cleaned = 0.00990144 Jy ! Total flux subtracted in 200 components = 0.00990144 Jy ! Clean residual min=-0.031904 max=0.033933 Jy/beam ! Clean residual mean=-0.000032 rms=0.009362 Jy/beam ! Combined flux in latest and established models = 2.79651 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 173 components and 2.79651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139790Jy sigma=0.001634 ! Fit after self-cal, rms=0.139337Jy sigma=0.001631 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=6.912 mas, bpa=-4.536 degrees ! Estimated noise=932.113 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 6.912 at -4.536 degrees (North through East) ! Clean map min=-0.035251 max=1.6868 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139337Jy sigma=0.001631 ! Fit after self-cal, rms=0.119976Jy sigma=0.001315 ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=6.907 mas, bpa=-4.661 degrees ! Estimated noise=932.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0212447 Jy ! Component: 100 - total flux cleaned = 0.0256227 Jy ! Component: 150 - total flux cleaned = 0.0282855 Jy ! Component: 200 - total flux cleaned = 0.0302165 Jy ! Total flux subtracted in 200 components = 0.0302165 Jy ! Clean residual min=-0.030786 max=0.029961 Jy/beam ! Clean residual mean=-0.000007 rms=0.006709 Jy/beam ! Combined flux in latest and established models = 2.82673 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 189 components and 2.82673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113254Jy sigma=0.001236 ! Fit after self-cal, rms=0.112883Jy sigma=0.001234 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180268 Jy ! Component: 100 - total flux cleaned = 0.00310678 Jy ! Component: 150 - total flux cleaned = 0.00433538 Jy ! Component: 200 - total flux cleaned = 0.00508815 Jy ! Total flux subtracted in 200 components = 0.00508815 Jy ! Clean residual min=-0.029818 max=0.029598 Jy/beam ! Clean residual mean=-0.000011 rms=0.006506 Jy/beam ! Combined flux in latest and established models = 2.83182 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 195 components and 2.83182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109431Jy sigma=0.001205 ! Fit after self-cal, rms=0.109128Jy sigma=0.001204 ! Inverting map ! Added new window around map position (19.5, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136645 Jy ! Component: 100 - total flux cleaned = 0.0122621 Jy ! Component: 150 - total flux cleaned = 0.012843 Jy ! Component: 200 - total flux cleaned = 0.0123821 Jy ! Total flux subtracted in 200 components = 0.0123821 Jy ! Clean residual min=-0.024363 max=0.022595 Jy/beam ! Clean residual mean=-0.000004 rms=0.005253 Jy/beam ! Combined flux in latest and established models = 2.8442 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 218 components and 2.8442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098765Jy sigma=0.001087 ! Fit after self-cal, rms=0.098566Jy sigma=0.001084 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098566Jy sigma=0.001084 ! Fit after self-cal, rms=0.096605Jy sigma=0.001064 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.573 mas, bmaj=5.742 mas, bpa=0.09206 degrees ! Estimated noise=1363.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.24711 Jy ! Component: 100 - total flux cleaned = 1.60454 Jy ! Component: 150 - total flux cleaned = 1.8094 Jy ! Component: 200 - total flux cleaned = 1.96252 Jy ! Total flux subtracted in 200 components = 1.96252 Jy ! Clean residual min=-0.072319 max=0.120646 Jy/beam ! Clean residual mean=0.000346 rms=0.023796 Jy/beam ! Combined flux in latest and established models = 1.96252 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 1.96252 Jy ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=6.894 mas, bpa=-4.618 degrees ! Estimated noise=929.144 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.21312 Jy ! Component: 100 - total flux cleaned = 0.364286 Jy ! Component: 150 - total flux cleaned = 0.476655 Jy ! Component: 200 - total flux cleaned = 0.560855 Jy ! Total flux subtracted in 200 components = 0.560855 Jy ! Clean residual min=-0.049364 max=0.056540 Jy/beam ! Clean residual mean=0.000191 rms=0.015503 Jy/beam ! Combined flux in latest and established models = 2.52338 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 103 components and 2.52338 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.257 mas, bmaj=13.94 mas, bpa=4.058 degrees ! Estimated noise=1116.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110051 Jy ! Component: 100 - total flux cleaned = 0.175369 Jy ! Component: 150 - total flux cleaned = 0.215327 Jy ! Component: 200 - total flux cleaned = 0.243567 Jy ! Total flux subtracted in 200 components = 0.243567 Jy ! Clean residual min=-0.042447 max=0.035541 Jy/beam ! Clean residual mean=0.000071 rms=0.011273 Jy/beam ! Combined flux in latest and established models = 2.76694 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0242866 Jy ! Component: 100 - total flux cleaned = 0.0440235 Jy ! Component: 150 - total flux cleaned = 0.0576438 Jy ! Component: 200 - total flux cleaned = 0.0667167 Jy ! Total flux subtracted in 200 components = 0.0667167 Jy ! Clean residual min=-0.030875 max=0.024622 Jy/beam ! Clean residual mean=0.000022 rms=0.007725 Jy/beam ! Combined flux in latest and established models = 2.83366 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 191 components and 2.83366 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=6.894 mas, bpa=-4.618 degrees ! Estimated noise=929.144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00797351 Jy ! Component: 100 - total flux cleaned = 0.0132025 Jy ! Component: 150 - total flux cleaned = 0.01785 Jy ! Component: 200 - total flux cleaned = 0.0231347 Jy ! Total flux subtracted in 200 components = 0.0231347 Jy ! Clean residual min=-0.021927 max=0.022191 Jy/beam ! Clean residual mean=0.000001 rms=0.005105 Jy/beam ! Combined flux in latest and established models = 2.85679 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 215 components and 2.85679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096498Jy sigma=0.001059 ! Fit after self-cal, rms=0.092295Jy sigma=0.001014 wmodel J1733-1304_S_2014_01_04_pus_map.mod ! Writing 215 model components to file: J1733-1304_S_2014_01_04_pus_map.mod wobs J1733-1304_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1733-1304_S_2014_01_04_pus_uvs.fits wwins J1733-1304_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J1733-1304_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000768566 Jy ! Component: 100 - total flux cleaned = -0.00011075 Jy ! Component: 150 - total flux cleaned = -0.00130065 Jy ! Component: 200 - total flux cleaned = -0.00211768 Jy ! Component: 250 - total flux cleaned = -0.00261033 Jy ! Component: 300 - total flux cleaned = -0.00283534 Jy ! Component: 350 - total flux cleaned = -0.00282518 Jy ! Component: 400 - total flux cleaned = -0.00221057 Jy ! Component: 450 - total flux cleaned = -0.00221488 Jy ! Component: 500 - total flux cleaned = -0.00184915 Jy ! Component: 550 - total flux cleaned = -0.00202366 Jy ! Component: 600 - total flux cleaned = -0.00185212 Jy ! Component: 650 - total flux cleaned = -0.00152884 Jy ! Component: 700 - total flux cleaned = -0.0012207 Jy ! Component: 750 - total flux cleaned = -0.00122167 Jy ! Component: 800 - total flux cleaned = -0.00165771 Jy ! Component: 850 - total flux cleaned = -0.00165876 Jy ! Component: 900 - total flux cleaned = -0.00166323 Jy ! Component: 950 - total flux cleaned = -0.0021819 Jy ! Component: 1000 - total flux cleaned = -0.00218231 Jy ! Component: 1050 - total flux cleaned = -0.00230252 Jy ! Component: 1100 - total flux cleaned = -0.00230329 Jy ! Component: 1150 - total flux cleaned = -0.00218803 Jy ! Component: 1200 - total flux cleaned = -0.00207623 Jy ! Component: 1250 - total flux cleaned = -0.00154397 Jy ! Component: 1300 - total flux cleaned = -0.00144056 Jy ! Component: 1350 - total flux cleaned = -0.000933237 Jy ! Component: 1400 - total flux cleaned = -0.000443091 Jy ! Component: 1450 - total flux cleaned = 0.000127923 Jy ! Component: 1500 - total flux cleaned = 0.000589867 Jy ! Component: 1550 - total flux cleaned = 0.000951221 Jy ! Component: 1600 - total flux cleaned = 0.00139195 Jy ! Component: 1650 - total flux cleaned = 0.00165092 Jy ! Component: 1700 - total flux cleaned = 0.00198844 Jy ! Component: 1750 - total flux cleaned = 0.00240081 Jy ! Component: 1800 - total flux cleaned = 0.00264227 Jy ! Component: 1850 - total flux cleaned = 0.00303335 Jy ! Component: 1900 - total flux cleaned = 0.00326473 Jy ! Component: 1950 - total flux cleaned = 0.00379104 Jy ! Component: 2000 - total flux cleaned = 0.00408468 Jy ! Component: 2050 - total flux cleaned = 0.00430027 Jy ! Component: 2100 - total flux cleaned = 0.0047254 Jy ! Component: 2150 - total flux cleaned = 0.00520891 Jy ! Component: 2200 - total flux cleaned = 0.00561727 Jy ! Component: 2250 - total flux cleaned = 0.00595031 Jy ! Component: 2300 - total flux cleaned = 0.00627907 Jy ! Component: 2350 - total flux cleaned = 0.00653595 Jy ! Component: 2400 - total flux cleaned = 0.00678627 Jy ! Component: 2450 - total flux cleaned = 0.00709586 Jy ! Component: 2500 - total flux cleaned = 0.00727926 Jy ! Component: 2550 - total flux cleaned = 0.00751912 Jy ! Component: 2600 - total flux cleaned = 0.0076379 Jy ! Component: 2650 - total flux cleaned = 0.00781238 Jy ! Component: 2700 - total flux cleaned = 0.00781153 Jy ! Component: 2750 - total flux cleaned = 0.00769927 Jy ! Component: 2800 - total flux cleaned = 0.00792083 Jy ! Component: 2850 - total flux cleaned = 0.00803003 Jy ! Component: 2900 - total flux cleaned = 0.00819111 Jy ! Component: 2950 - total flux cleaned = 0.00829734 Jy ! Component: 3000 - total flux cleaned = 0.00845346 Jy ! Component: 3050 - total flux cleaned = 0.0084527 Jy ! Component: 3100 - total flux cleaned = 0.00850357 Jy ! Component: 3150 - total flux cleaned = 0.00855396 Jy ! Component: 3200 - total flux cleaned = 0.00870171 Jy ! Component: 3250 - total flux cleaned = 0.0086532 Jy ! Component: 3300 - total flux cleaned = 0.00850923 Jy ! Component: 3350 - total flux cleaned = 0.00846289 Jy ! Component: 3400 - total flux cleaned = 0.00841539 Jy ! Component: 3450 - total flux cleaned = 0.00836985 Jy ! Component: 3500 - total flux cleaned = 0.00827859 Jy ! Component: 3550 - total flux cleaned = 0.00836962 Jy ! Component: 3600 - total flux cleaned = 0.0085039 Jy ! Component: 3650 - total flux cleaned = 0.00863701 Jy ! Component: 3700 - total flux cleaned = 0.00872516 Jy ! Component: 3750 - total flux cleaned = 0.00890015 Jy ! Component: 3800 - total flux cleaned = 0.00877009 Jy ! Component: 3850 - total flux cleaned = 0.00902845 Jy ! Component: 3900 - total flux cleaned = 0.00907116 Jy ! Component: 3950 - total flux cleaned = 0.00911348 Jy ! Component: 4000 - total flux cleaned = 0.00924029 Jy ! Component: 4050 - total flux cleaned = 0.00924071 Jy ! Total flux subtracted in 4096 components = 0.00944928 Jy ! Clean residual min=-0.002271 max=0.002510 Jy/beam ! Clean residual mean=0.000011 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 2.86624 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 469 components and 2.86624 Jy ![Exited script file: muppet] wmap "J1733-1304_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.126 x 6.894 at -4.618 degrees (North through East) ! Clean map min=-0.0079764 max=1.6894 Jy/beam ! Writing clean map to FITS file: J1733-1304_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.68945 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000645919 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.114698 0.114698 0.229395 0.45879 0.917581 1.83516 3.67032 7.34065 14.6813 29.3626 58.7252 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.689 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.126 x 6.894 at -4.618 degrees (North through East) ! Clean map min=-0.0079764 max=1.6894 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1733-1304_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:33:33 2017