! Started logfile: J1729-2657_S_2015_01_22_pus_uvs.log on Tue Jan 3 23:01:13 2017 obs J1729-2657_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1729-2657_S_2015_01_22_pus_uva.fits ! AN table 1: 59 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.570621 visibilities/baseline/integration-bin. ! Found source: J1729-2657 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 6060 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1729-2657_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938320Jy sigma=0.008681 ! Fit after self-cal, rms=0.913129Jy sigma=0.008468 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.373 mas, bmaj=6.475 mas, bpa=-10.89 degrees ! Estimated noise=1547.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0447604 Jy ! Component: 100 - total flux cleaned = 0.0663154 Jy ! Total flux subtracted in 100 components = 0.0663154 Jy ! Clean residual min=-0.007817 max=0.014628 Jy/beam ! Clean residual mean=-0.000017 rms=0.003096 Jy/beam ! Combined flux in latest and established models = 0.0663154 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.0663154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113267Jy sigma=0.000994 ! Fit after self-cal, rms=0.112835Jy sigma=0.000991 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=9.038 mas, bpa=-10.46 degrees ! Estimated noise=995.134 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0446221 Jy ! Component: 100 - total flux cleaned = 0.0678887 Jy ! Component: 150 - total flux cleaned = 0.0802828 Jy ! Component: 200 - total flux cleaned = 0.0869509 Jy ! Total flux subtracted in 200 components = 0.0869509 Jy ! Clean residual min=-0.011078 max=0.017815 Jy/beam ! Clean residual mean=-0.000024 rms=0.003891 Jy/beam ! Combined flux in latest and established models = 0.153266 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 52 components and 0.153266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094508Jy sigma=0.000816 ! Fit after self-cal, rms=0.093911Jy sigma=0.000811 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.21 KP 0.96 ! LA 0.99 MK 0.92 NL 1.70 OV 0.90 ! PT 0.95 SC 1.47 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* HN 1.33 KP 0.93 ! LA 0.95 MK 1.06 NL 1.92 OV 0.90 ! PT 0.90 SC 1.52 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 1.06 KP 0.75 ! LA 0.82 MK 0.99 NL 1.79 OV 0.87 ! PT 0.93 SC 1.63 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.88 KP 0.74 ! LA 0.89 MK 1.18 NL 1.61 OV 0.92 ! PT 0.95 SC 1.32 ! ! ! Fit before self-cal, rms=0.093911Jy sigma=0.000811 ! Fit after self-cal, rms=0.108605Jy sigma=0.000758 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.573 mas, bmaj=9.79 mas, bpa=-12.86 degrees ! Estimated noise=1086.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000862528 Jy ! Component: 100 - total flux cleaned = 0.0010296 Jy ! Component: 150 - total flux cleaned = 0.00117969 Jy ! Component: 200 - total flux cleaned = 0.00124749 Jy ! Total flux subtracted in 200 components = 0.00124749 Jy ! Clean residual min=-0.005249 max=0.006770 Jy/beam ! Clean residual mean=0.000004 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 0.154514 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.154514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108466Jy sigma=0.000757 ! Fit after self-cal, rms=0.109406Jy sigma=0.000755 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109406Jy sigma=0.000755 ! Fit after self-cal, rms=0.109558Jy sigma=0.000755 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.509 mas, bmaj=9.726 mas, bpa=-13.47 degrees ! Estimated noise=1075.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000355582 Jy ! Component: 100 - total flux cleaned = 0.000447776 Jy ! Component: 150 - total flux cleaned = 0.00049028 Jy ! Component: 200 - total flux cleaned = 0.000529115 Jy ! Total flux subtracted in 200 components = 0.000529115 Jy ! Clean residual min=-0.005037 max=0.006657 Jy/beam ! Clean residual mean=0.000003 rms=0.001484 Jy/beam ! Combined flux in latest and established models = 0.155043 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 66 components and 0.155043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109516Jy sigma=0.000754 ! Fit after self-cal, rms=0.109555Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21.5, 74.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00572653 Jy ! Component: 100 - total flux cleaned = 0.007593 Jy ! Component: 150 - total flux cleaned = 0.00820006 Jy ! Component: 200 - total flux cleaned = 0.00851004 Jy ! Total flux subtracted in 200 components = 0.00851004 Jy ! Clean residual min=-0.004816 max=0.004760 Jy/beam ! Clean residual mean=-0.000009 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 0.163553 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 97 components and 0.163553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109204Jy sigma=0.000752 ! Fit after self-cal, rms=0.109125Jy sigma=0.000751 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109125Jy sigma=0.000751 ! Fit after self-cal, rms=0.108076Jy sigma=0.000751 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=9.747 mas, bpa=-13.6 degrees ! Estimated noise=1068.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196118 Jy ! Component: 100 - total flux cleaned = 0.00178678 Jy ! Component: 150 - total flux cleaned = 0.00162461 Jy ! Component: 200 - total flux cleaned = 0.00147674 Jy ! Total flux subtracted in 200 components = 0.00147674 Jy ! Clean residual min=-0.004319 max=0.004153 Jy/beam ! Clean residual mean=-0.000006 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.16503 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 121 components and 0.16503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107978Jy sigma=0.000750 ! Fit after self-cal, rms=0.107967Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000546773 Jy ! Component: 100 - total flux cleaned = 0.000345105 Jy ! Component: 150 - total flux cleaned = 0.000212 Jy ! Component: 200 - total flux cleaned = 0.000170909 Jy ! Total flux subtracted in 200 components = 0.000170909 Jy ! Clean residual min=-0.004173 max=0.004177 Jy/beam ! Clean residual mean=-0.000006 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.165201 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 134 components and 0.165201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107917Jy sigma=0.000750 ! Fit after self-cal, rms=0.107923Jy sigma=0.000750 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107923Jy sigma=0.000750 ! Fit after self-cal, rms=0.107173Jy sigma=0.000750 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.951 mas, bmaj=22.31 mas, bpa=-9.391 degrees ! Estimated noise=1202.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000185729 Jy ! Component: 100 - total flux cleaned = -0.000211345 Jy ! Component: 150 - total flux cleaned = -0.000244431 Jy ! Component: 200 - total flux cleaned = -0.00027435 Jy ! Total flux subtracted in 200 components = -0.00027435 Jy ! Clean residual min=-0.003615 max=0.004469 Jy/beam ! Clean residual mean=-0.000005 rms=0.001270 Jy/beam ! Combined flux in latest and established models = 0.164926 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 144 components and 0.164926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107167Jy sigma=0.000749 ! Fit after self-cal, rms=0.107161Jy sigma=0.000749 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.07908e-05 Jy ! Component: 100 - total flux cleaned = -7.01018e-05 Jy ! Component: 150 - total flux cleaned = -0.000118561 Jy ! Component: 200 - total flux cleaned = -0.000139507 Jy ! Total flux subtracted in 200 components = -0.000139507 Jy ! Clean residual min=-0.003672 max=0.004397 Jy/beam ! Clean residual mean=-0.000005 rms=0.001244 Jy/beam ! Combined flux in latest and established models = 0.164787 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 148 components and 0.164787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107161Jy sigma=0.000749 ! Fit after self-cal, rms=0.107169Jy sigma=0.000749 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=9.756 mas, bpa=-13.59 degrees ! Estimated noise=1065.61 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.496 x 9.756 at -13.59 degrees (North through East) ! Clean map min=-0.0036074 max=0.069729 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.412 mas, bmaj=6.802 mas, bpa=-13.88 degrees ! Estimated noise=1762.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0519793 Jy ! Component: 100 - total flux cleaned = 0.0790091 Jy ! Component: 150 - total flux cleaned = 0.0982326 Jy ! Component: 200 - total flux cleaned = 0.112504 Jy ! Total flux subtracted in 200 components = 0.112504 Jy ! Clean residual min=-0.007725 max=0.012214 Jy/beam ! Clean residual mean=-0.000013 rms=0.002292 Jy/beam ! Combined flux in latest and established models = 0.112504 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.112504 Jy ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=9.756 mas, bpa=-13.59 degrees ! Estimated noise=1065.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234163 Jy ! Component: 100 - total flux cleaned = 0.0346377 Jy ! Component: 150 - total flux cleaned = 0.0413307 Jy ! Component: 200 - total flux cleaned = 0.0458241 Jy ! Total flux subtracted in 200 components = 0.0458241 Jy ! Clean residual min=-0.004649 max=0.004058 Jy/beam ! Clean residual mean=-0.000007 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.158328 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 87 components and 0.158328 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.951 mas, bmaj=22.31 mas, bpa=-9.391 degrees ! Estimated noise=1202.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354589 Jy ! Component: 100 - total flux cleaned = 0.00397669 Jy ! Component: 150 - total flux cleaned = 0.00431674 Jy ! Component: 200 - total flux cleaned = 0.00459606 Jy ! Total flux subtracted in 200 components = 0.00459606 Jy ! Clean residual min=-0.003926 max=0.004278 Jy/beam ! Clean residual mean=-0.000008 rms=0.001149 Jy/beam ! Combined flux in latest and established models = 0.162924 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023438 Jy ! Component: 100 - total flux cleaned = 0.000387404 Jy ! Component: 150 - total flux cleaned = 0.00056304 Jy ! Component: 200 - total flux cleaned = 0.000751697 Jy ! Total flux subtracted in 200 components = 0.000751697 Jy ! Clean residual min=-0.003625 max=0.004011 Jy/beam ! Clean residual mean=-0.000008 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.163675 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 129 components and 0.163675 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=9.756 mas, bpa=-13.59 degrees ! Estimated noise=1065.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.74903e-05 Jy ! Component: 100 - total flux cleaned = -0.000105954 Jy ! Component: 150 - total flux cleaned = -0.000164005 Jy ! Component: 200 - total flux cleaned = -0.000217685 Jy ! Total flux subtracted in 200 components = -0.000217685 Jy ! Clean residual min=-0.003808 max=0.003214 Jy/beam ! Clean residual mean=-0.000005 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.163458 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 151 components and 0.163458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107120Jy sigma=0.000749 ! Fit after self-cal, rms=0.106923Jy sigma=0.000748 wmodel J1729-2657_S_2015_01_22_pus_map.mod ! Writing 151 model components to file: J1729-2657_S_2015_01_22_pus_map.mod wobs J1729-2657_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1729-2657_S_2015_01_22_pus_uvs.fits wwins J1729-2657_S_2015_01_22_pus_map.win ! wwins: Wrote 3 windows to J1729-2657_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0017034 Jy ! Component: 100 - total flux cleaned = -0.00176439 Jy ! Component: 150 - total flux cleaned = -0.00155875 Jy ! Component: 200 - total flux cleaned = -0.00155812 Jy ! Component: 250 - total flux cleaned = -0.00160175 Jy ! Component: 300 - total flux cleaned = -0.00173119 Jy ! Component: 350 - total flux cleaned = -0.00189655 Jy ! Component: 400 - total flux cleaned = -0.00209512 Jy ! Component: 450 - total flux cleaned = -0.00224833 Jy ! Component: 500 - total flux cleaned = -0.00239639 Jy ! Component: 550 - total flux cleaned = -0.00257656 Jy ! Component: 600 - total flux cleaned = -0.00282215 Jy ! Component: 650 - total flux cleaned = -0.00302748 Jy ! Component: 700 - total flux cleaned = -0.00326113 Jy ! Component: 750 - total flux cleaned = -0.00345639 Jy ! Component: 800 - total flux cleaned = -0.00364756 Jy ! Component: 850 - total flux cleaned = -0.00386551 Jy ! Component: 900 - total flux cleaned = -0.00395655 Jy ! Component: 950 - total flux cleaned = -0.00401608 Jy ! Component: 1000 - total flux cleaned = -0.00413312 Jy ! Component: 1050 - total flux cleaned = -0.00424771 Jy ! Component: 1100 - total flux cleaned = -0.00433216 Jy ! Component: 1150 - total flux cleaned = -0.00444295 Jy ! Component: 1200 - total flux cleaned = -0.00449752 Jy ! Component: 1250 - total flux cleaned = -0.00465885 Jy ! Component: 1300 - total flux cleaned = -0.0047643 Jy ! Component: 1350 - total flux cleaned = -0.00489387 Jy ! Component: 1400 - total flux cleaned = -0.00499628 Jy ! Component: 1450 - total flux cleaned = -0.00504671 Jy ! Component: 1500 - total flux cleaned = -0.00517168 Jy ! Component: 1550 - total flux cleaned = -0.00522106 Jy ! Component: 1600 - total flux cleaned = -0.00529384 Jy ! Component: 1650 - total flux cleaned = -0.00538934 Jy ! Component: 1700 - total flux cleaned = -0.0053661 Jy ! Component: 1750 - total flux cleaned = -0.00543604 Jy ! Component: 1800 - total flux cleaned = -0.00548198 Jy ! Component: 1850 - total flux cleaned = -0.00548192 Jy ! Component: 1900 - total flux cleaned = -0.00552694 Jy ! Component: 1950 - total flux cleaned = -0.00552711 Jy ! Component: 2000 - total flux cleaned = -0.00557109 Jy ! Component: 2050 - total flux cleaned = -0.0055715 Jy ! Component: 2100 - total flux cleaned = -0.00565712 Jy ! Component: 2150 - total flux cleaned = -0.00567832 Jy ! Component: 2200 - total flux cleaned = -0.00572028 Jy ! Component: 2250 - total flux cleaned = -0.0057615 Jy ! Component: 2300 - total flux cleaned = -0.00576152 Jy ! Component: 2350 - total flux cleaned = -0.00580238 Jy ! Component: 2400 - total flux cleaned = -0.0058225 Jy ! Component: 2450 - total flux cleaned = -0.00582262 Jy ! Component: 2500 - total flux cleaned = -0.00584243 Jy ! Component: 2550 - total flux cleaned = -0.00592071 Jy ! Component: 2600 - total flux cleaned = -0.00590097 Jy ! Component: 2650 - total flux cleaned = -0.00592019 Jy ! Component: 2700 - total flux cleaned = -0.00597743 Jy ! Component: 2750 - total flux cleaned = -0.00601529 Jy ! Component: 2800 - total flux cleaned = -0.00610966 Jy ! Component: 2850 - total flux cleaned = -0.0061658 Jy ! Component: 2900 - total flux cleaned = -0.00625894 Jy ! Component: 2950 - total flux cleaned = -0.00629584 Jy ! Component: 3000 - total flux cleaned = -0.00631427 Jy ! Component: 3050 - total flux cleaned = -0.00638769 Jy ! Component: 3100 - total flux cleaned = -0.00640608 Jy ! Component: 3150 - total flux cleaned = -0.00649692 Jy ! Component: 3200 - total flux cleaned = -0.0065691 Jy ! Component: 3250 - total flux cleaned = -0.00660508 Jy ! Component: 3300 - total flux cleaned = -0.00667657 Jy ! Component: 3350 - total flux cleaned = -0.00673002 Jy ! Component: 3400 - total flux cleaned = -0.00678304 Jy ! Component: 3450 - total flux cleaned = -0.00685348 Jy ! Component: 3500 - total flux cleaned = -0.00694108 Jy ! Component: 3550 - total flux cleaned = -0.006941 Jy ! Component: 3600 - total flux cleaned = -0.00699309 Jy ! Component: 3650 - total flux cleaned = -0.00707959 Jy ! Component: 3700 - total flux cleaned = -0.0071485 Jy ! Component: 3750 - total flux cleaned = -0.00720012 Jy ! Component: 3800 - total flux cleaned = -0.00728568 Jy ! Component: 3850 - total flux cleaned = -0.00731983 Jy ! Component: 3900 - total flux cleaned = -0.00737103 Jy ! Component: 3950 - total flux cleaned = -0.00743906 Jy ! Component: 4000 - total flux cleaned = -0.00752385 Jy ! Component: 4050 - total flux cleaned = -0.00760851 Jy ! Total flux subtracted in 4096 components = -0.00765932 Jy ! Clean residual min=-0.001044 max=0.001135 Jy/beam ! Clean residual mean=0.000000 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.155798 Jy keep ! Adding 228 model components to the UV plane model. ! The established model now contains 379 components and 0.155798 Jy ![Exited script file: muppet] wmap "J1729-2657_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.496 x 9.756 at -13.59 degrees (North through East) ! Clean map min=-0.003195 max=0.073766 Jy/beam ! Writing clean map to FITS file: J1729-2657_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0737664 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000295696 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.20257 1.20257 2.40513 4.81026 9.62052 19.241 38.4821 76.9642 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.496 x 9.756 at -13.59 degrees (North through East) ! Clean map min=-0.003195 max=0.073766 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1729-2657_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 23:01:18 2017