! Started logfile: J1728+3838_S_2015_01_22_pus_uvs.log on Tue Jan 3 23:01:08 2017 obs J1728+3838_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1728+3838_S_2015_01_22_pus_uva.fits ! AN table 1: 38 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1728+3838 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 5472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1728+3838_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.899172Jy sigma=0.011746 ! Fit after self-cal, rms=0.891574Jy sigma=0.011652 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.626 mas, bmaj=8.083 mas, bpa=19.82 degrees ! Estimated noise=985.992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0798516 Jy ! Component: 100 - total flux cleaned = 0.106916 Jy ! Total flux subtracted in 100 components = 0.106916 Jy ! Clean residual min=-0.007100 max=0.012927 Jy/beam ! Clean residual mean=-0.000005 rms=0.002278 Jy/beam ! Combined flux in latest and established models = 0.106916 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.106916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069150Jy sigma=0.000845 ! Fit after self-cal, rms=0.069115Jy sigma=0.000844 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.089 mas, bmaj=8.351 mas, bpa=20.19 degrees ! Estimated noise=741.537 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173514 Jy ! Component: 100 - total flux cleaned = 0.0256894 Jy ! Component: 150 - total flux cleaned = 0.0302732 Jy ! Component: 200 - total flux cleaned = 0.0333113 Jy ! Total flux subtracted in 200 components = 0.0333113 Jy ! Clean residual min=-0.003730 max=0.004743 Jy/beam ! Clean residual mean=0.000005 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.140227 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 44 components and 0.140227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064589Jy sigma=0.000792 ! Fit after self-cal, rms=0.064563Jy sigma=0.000791 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.96 KP 1.12 ! LA 1.00 MK 1.03 NL 1.01 OV 0.98 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.10 KP 1.04 ! LA 0.92 MK 1.06 NL 1.06 OV 0.99 ! PT 1.00 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 0.99 KP 0.88 ! LA 0.81 MK 1.08 NL 1.14 OV 0.93 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* HN 0.97 KP 0.80 ! LA 0.87 MK 0.99 NL 1.07 OV 0.95 ! PT 1.03 SC 0.93 ! ! ! Fit before self-cal, rms=0.064563Jy sigma=0.000791 ! Fit after self-cal, rms=0.061324Jy sigma=0.000773 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.122 mas, bmaj=8.392 mas, bpa=20.2 degrees ! Estimated noise=734.554 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164606 Jy ! Component: 100 - total flux cleaned = 0.000185021 Jy ! Component: 150 - total flux cleaned = 0.000218757 Jy ! Component: 200 - total flux cleaned = 0.000232777 Jy ! Total flux subtracted in 200 components = 0.000232777 Jy ! Clean residual min=-0.002164 max=0.002658 Jy/beam ! Clean residual mean=0.000003 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.14046 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.14046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061314Jy sigma=0.000773 ! Fit after self-cal, rms=0.061300Jy sigma=0.000773 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061300Jy sigma=0.000773 ! Fit after self-cal, rms=0.061419Jy sigma=0.000773 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.125 mas, bmaj=8.388 mas, bpa=20.23 degrees ! Estimated noise=735.314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.65095e-05 Jy ! Component: 100 - total flux cleaned = 0.000101796 Jy ! Component: 150 - total flux cleaned = 0.000112018 Jy ! Component: 200 - total flux cleaned = 0.000111804 Jy ! Total flux subtracted in 200 components = 0.000111804 Jy ! Clean residual min=-0.002097 max=0.002638 Jy/beam ! Clean residual mean=0.000003 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.140572 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.140572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061415Jy sigma=0.000773 ! Fit after self-cal, rms=0.061416Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -66.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177276 Jy ! Component: 100 - total flux cleaned = 0.00231443 Jy ! Component: 150 - total flux cleaned = 0.00270988 Jy ! Component: 200 - total flux cleaned = 0.00294212 Jy ! Total flux subtracted in 200 components = 0.00294212 Jy ! Clean residual min=-0.001897 max=0.002004 Jy/beam ! Clean residual mean=0.000003 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.143514 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 87 components and 0.143514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061322Jy sigma=0.000771 ! Fit after self-cal, rms=0.061320Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061320Jy sigma=0.000771 ! Fit after self-cal, rms=0.061145Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.125 mas, bmaj=8.385 mas, bpa=20.23 degrees ! Estimated noise=733.331 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000469128 Jy ! Component: 100 - total flux cleaned = 0.00066978 Jy ! Component: 150 - total flux cleaned = 0.000798687 Jy ! Component: 200 - total flux cleaned = 0.000915954 Jy ! Total flux subtracted in 200 components = 0.000915954 Jy ! Clean residual min=-0.001793 max=0.001997 Jy/beam ! Clean residual mean=0.000003 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.14443 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 97 components and 0.14443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061124Jy sigma=0.000771 ! Fit after self-cal, rms=0.061123Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000276848 Jy ! Component: 100 - total flux cleaned = 0.00037944 Jy ! Component: 150 - total flux cleaned = 0.000493349 Jy ! Component: 200 - total flux cleaned = 0.000616861 Jy ! Total flux subtracted in 200 components = 0.000616861 Jy ! Clean residual min=-0.001731 max=0.002001 Jy/beam ! Clean residual mean=0.000003 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.145046 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 103 components and 0.145046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061112Jy sigma=0.000771 ! Fit after self-cal, rms=0.061113Jy sigma=0.000771 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061113Jy sigma=0.000771 ! Fit after self-cal, rms=0.061061Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.513 mas, bmaj=10.15 mas, bpa=11.84 degrees ! Estimated noise=924.484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000389866 Jy ! Component: 100 - total flux cleaned = 0.000551811 Jy ! Component: 150 - total flux cleaned = 0.000656702 Jy ! Component: 200 - total flux cleaned = 0.000732569 Jy ! Total flux subtracted in 200 components = 0.000732569 Jy ! Clean residual min=-0.002003 max=0.001813 Jy/beam ! Clean residual mean=0.000004 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.145779 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 124 components and 0.145779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061060Jy sigma=0.000771 ! Fit after self-cal, rms=0.061058Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010535 Jy ! Component: 100 - total flux cleaned = 0.000175301 Jy ! Component: 150 - total flux cleaned = 0.000225644 Jy ! Component: 200 - total flux cleaned = 0.000293475 Jy ! Total flux subtracted in 200 components = 0.000293475 Jy ! Clean residual min=-0.001930 max=0.001801 Jy/beam ! Clean residual mean=0.000004 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.146073 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 137 components and 0.146073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061059Jy sigma=0.000771 ! Fit after self-cal, rms=0.061059Jy sigma=0.000771 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=8.385 mas, bpa=20.24 degrees ! Estimated noise=732.951 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.124 x 8.385 at 20.24 degrees (North through East) ! Clean map min=-0.0018691 max=0.10864 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.65 mas, bmaj=8.109 mas, bpa=19.92 degrees ! Estimated noise=973.215 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0784995 Jy ! Component: 100 - total flux cleaned = 0.104898 Jy ! Component: 150 - total flux cleaned = 0.118969 Jy ! Component: 200 - total flux cleaned = 0.126598 Jy ! Total flux subtracted in 200 components = 0.126598 Jy ! Clean residual min=-0.003426 max=0.004065 Jy/beam ! Clean residual mean=0.000001 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.126598 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.126598 Jy ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=8.385 mas, bpa=20.24 degrees ! Estimated noise=732.951 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00532768 Jy ! Component: 100 - total flux cleaned = 0.00831098 Jy ! Component: 150 - total flux cleaned = 0.00998434 Jy ! Component: 200 - total flux cleaned = 0.0113053 Jy ! Total flux subtracted in 200 components = 0.0113053 Jy ! Clean residual min=-0.002274 max=0.002335 Jy/beam ! Clean residual mean=0.000003 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.137903 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 49 components and 0.137903 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.513 mas, bmaj=10.15 mas, bpa=11.84 degrees ! Estimated noise=924.484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228371 Jy ! Component: 100 - total flux cleaned = 0.00384164 Jy ! Component: 150 - total flux cleaned = 0.00505046 Jy ! Component: 200 - total flux cleaned = 0.00567391 Jy ! Total flux subtracted in 200 components = 0.00567391 Jy ! Clean residual min=-0.002299 max=0.001770 Jy/beam ! Clean residual mean=0.000005 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.143577 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000496241 Jy ! Component: 100 - total flux cleaned = 0.000947713 Jy ! Component: 150 - total flux cleaned = 0.00119384 Jy ! Component: 200 - total flux cleaned = 0.00139047 Jy ! Total flux subtracted in 200 components = 0.00139047 Jy ! Clean residual min=-0.002013 max=0.001724 Jy/beam ! Clean residual mean=0.000004 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.144968 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 99 components and 0.144968 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=8.385 mas, bpa=20.24 degrees ! Estimated noise=732.951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000126475 Jy ! Component: 100 - total flux cleaned = 7.25142e-05 Jy ! Component: 150 - total flux cleaned = 0.00021228 Jy ! Component: 200 - total flux cleaned = 0.00030836 Jy ! Total flux subtracted in 200 components = 0.00030836 Jy ! Clean residual min=-0.001764 max=0.002060 Jy/beam ! Clean residual mean=0.000003 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.145276 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 115 components and 0.145276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061074Jy sigma=0.000771 ! Fit after self-cal, rms=0.061074Jy sigma=0.000771 wmodel J1728+3838_S_2015_01_22_pus_map.mod ! Writing 115 model components to file: J1728+3838_S_2015_01_22_pus_map.mod wobs J1728+3838_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1728+3838_S_2015_01_22_pus_uvs.fits wwins J1728+3838_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J1728+3838_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000442373 Jy ! Component: 100 - total flux cleaned = 0.000229327 Jy ! Component: 150 - total flux cleaned = 2.71211e-05 Jy ! Component: 200 - total flux cleaned = 8.24775e-05 Jy ! Component: 250 - total flux cleaned = 5.58193e-05 Jy ! Component: 300 - total flux cleaned = 5.55739e-05 Jy ! Component: 350 - total flux cleaned = 3.11193e-05 Jy ! Component: 400 - total flux cleaned = 3.10808e-05 Jy ! Component: 450 - total flux cleaned = 8.20842e-06 Jy ! Component: 500 - total flux cleaned = 8.35251e-06 Jy ! Component: 550 - total flux cleaned = -1.29856e-05 Jy ! Component: 600 - total flux cleaned = 7.63411e-06 Jy ! Component: 650 - total flux cleaned = 6.7845e-05 Jy ! Component: 700 - total flux cleaned = 0.00012698 Jy ! Component: 750 - total flux cleaned = 0.000203751 Jy ! Component: 800 - total flux cleaned = 0.000297107 Jy ! Component: 850 - total flux cleaned = 0.000315559 Jy ! Component: 900 - total flux cleaned = 0.000387439 Jy ! Component: 950 - total flux cleaned = 0.000439925 Jy ! Component: 1000 - total flux cleaned = 0.00052564 Jy ! Component: 1050 - total flux cleaned = 0.000609672 Jy ! Component: 1100 - total flux cleaned = 0.000675587 Jy ! Component: 1150 - total flux cleaned = 0.000789258 Jy ! Component: 1200 - total flux cleaned = 0.000852905 Jy ! Component: 1250 - total flux cleaned = 0.000947034 Jy ! Component: 1300 - total flux cleaned = 0.00102433 Jy ! Component: 1350 - total flux cleaned = 0.00113059 Jy ! Component: 1400 - total flux cleaned = 0.00118997 Jy ! Component: 1450 - total flux cleaned = 0.00129268 Jy ! Component: 1500 - total flux cleaned = 0.00136482 Jy ! Component: 1550 - total flux cleaned = 0.00145026 Jy ! Component: 1600 - total flux cleaned = 0.00150651 Jy ! Component: 1650 - total flux cleaned = 0.00157576 Jy ! Component: 1700 - total flux cleaned = 0.00161652 Jy ! Component: 1750 - total flux cleaned = 0.00164372 Jy ! Component: 1800 - total flux cleaned = 0.00174979 Jy ! Component: 1850 - total flux cleaned = 0.00181521 Jy ! Component: 1900 - total flux cleaned = 0.00185393 Jy ! Component: 1950 - total flux cleaned = 0.00191766 Jy ! Component: 2000 - total flux cleaned = 0.0019928 Jy ! Component: 2050 - total flux cleaned = 0.00203002 Jy ! Component: 2100 - total flux cleaned = 0.00201781 Jy ! Component: 2150 - total flux cleaned = 0.00212632 Jy ! Component: 2200 - total flux cleaned = 0.00216182 Jy ! Component: 2250 - total flux cleaned = 0.00218553 Jy ! Component: 2300 - total flux cleaned = 0.00216244 Jy ! Component: 2350 - total flux cleaned = 0.00219704 Jy ! Component: 2400 - total flux cleaned = 0.00226525 Jy ! Component: 2450 - total flux cleaned = 0.00229879 Jy ! Component: 2500 - total flux cleaned = 0.00228763 Jy ! Component: 2550 - total flux cleaned = 0.00235326 Jy ! Component: 2600 - total flux cleaned = 0.00243995 Jy ! Component: 2650 - total flux cleaned = 0.00247184 Jy ! Component: 2700 - total flux cleaned = 0.0025142 Jy ! Component: 2750 - total flux cleaned = 0.00254559 Jy ! Component: 2800 - total flux cleaned = 0.00258687 Jy ! Component: 2850 - total flux cleaned = 0.00263796 Jy ! Component: 2900 - total flux cleaned = 0.00264808 Jy ! Component: 2950 - total flux cleaned = 0.00268822 Jy ! Component: 3000 - total flux cleaned = 0.00273781 Jy ! Component: 3050 - total flux cleaned = 0.00278695 Jy ! Component: 3100 - total flux cleaned = 0.00287426 Jy ! Component: 3150 - total flux cleaned = 0.00292237 Jy ! Component: 3200 - total flux cleaned = 0.00296993 Jy ! Component: 3250 - total flux cleaned = 0.00304553 Jy ! Component: 3300 - total flux cleaned = 0.00310168 Jy ! Component: 3350 - total flux cleaned = 0.00309258 Jy ! Component: 3400 - total flux cleaned = 0.00317545 Jy ! Component: 3450 - total flux cleaned = 0.00320281 Jy ! Component: 3500 - total flux cleaned = 0.00322986 Jy ! Component: 3550 - total flux cleaned = 0.0032747 Jy ! Component: 3600 - total flux cleaned = 0.00329249 Jy ! Component: 3650 - total flux cleaned = 0.00329251 Jy ! Component: 3700 - total flux cleaned = 0.00330131 Jy ! Component: 3750 - total flux cleaned = 0.00331009 Jy ! Component: 3800 - total flux cleaned = 0.00331008 Jy ! Component: 3850 - total flux cleaned = 0.00332737 Jy ! Component: 3900 - total flux cleaned = 0.00337871 Jy ! Component: 3950 - total flux cleaned = 0.00336162 Jy ! Component: 4000 - total flux cleaned = 0.00336172 Jy ! Component: 4050 - total flux cleaned = 0.00337857 Jy ! Total flux subtracted in 4096 components = 0.0033869 Jy ! Clean residual min=-0.000495 max=0.000528 Jy/beam ! Clean residual mean=0.000001 rms=0.000147 Jy/beam ! Combined flux in latest and established models = 0.148663 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 387 components and 0.148663 Jy ![Exited script file: muppet] wmap "J1728+3838_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.124 x 8.385 at 20.24 degrees (North through East) ! Clean map min=-0.0015255 max=0.10835 Jy/beam ! Writing clean map to FITS file: J1728+3838_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.108352 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000143972 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.398623 0.398623 0.797247 1.59449 3.18899 6.37797 12.7559 25.5119 51.0238 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.108 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.124 x 8.385 at 20.24 degrees (North through East) ! Clean map min=-0.0015255 max=0.10835 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1728+3838_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 23:01:13 2017