! Started logfile: J1727-1951_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:05:36 2016 obs J1727-1951_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1727-1951_S_2015_03_17_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.886703 visibilities/baseline/integration-bin. ! Found source: J1727-1951 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 19472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1727-1951_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006396Jy sigma=0.009211 ! Fit after self-cal, rms=0.957080Jy sigma=0.008834 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.365 mas, bmaj=6.184 mas, bpa=-0.7555 degrees ! Estimated noise=865.223 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0347477 Jy ! Component: 100 - total flux cleaned = 0.0438902 Jy ! Total flux subtracted in 100 components = 0.0438902 Jy ! Clean residual min=-0.003390 max=0.005453 Jy/beam ! Clean residual mean=0.000003 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.0438902 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0438902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159973Jy sigma=0.000812 ! Fit after self-cal, rms=0.159114Jy sigma=0.000799 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00686715 Jy ! Component: 100 - total flux cleaned = 0.011165 Jy ! Total flux subtracted in 100 components = 0.011165 Jy ! Clean residual min=-0.003448 max=0.004964 Jy/beam ! Clean residual mean=0.000006 rms=0.000975 Jy/beam ! Combined flux in latest and established models = 0.0550552 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 39 components and 0.0550552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158204Jy sigma=0.000794 ! Fit after self-cal, rms=0.158103Jy sigma=0.000793 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.938 mas, bmaj=7.378 mas, bpa=-1.169 degrees ! Estimated noise=572.501 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618823 Jy ! Component: 100 - total flux cleaned = 0.00973427 Jy ! Component: 150 - total flux cleaned = 0.0119887 Jy ! Component: 200 - total flux cleaned = 0.0134664 Jy ! Total flux subtracted in 200 components = 0.0134664 Jy ! Clean residual min=-0.003271 max=0.004260 Jy/beam ! Clean residual mean=0.000010 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.0685215 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 79 components and 0.0685216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157491Jy sigma=0.000791 ! Fit after self-cal, rms=0.157387Jy sigma=0.000790 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.83 HN 1.04 KP 0.92 ! LA 0.90 MK 1.00 NL 0.94 OV 1.23 ! PT 1.17 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.81 HN 0.98 KP 1.08 ! LA 0.99 MK 1.05 NL 1.07 OV 1.12 ! PT 1.09 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.93 HN 1.05 KP 1.03 ! LA 0.81 MK 1.04 NL 1.18 OV 1.02 ! PT 1.07 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.95 HN 1.07 KP 0.96 ! LA 0.89 MK 1.06 NL 0.97 OV 1.13 ! PT 0.97 SC 1.07 ! ! ! Fit before self-cal, rms=0.157387Jy sigma=0.000790 ! Fit after self-cal, rms=0.165968Jy sigma=0.000787 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=7.429 mas, bpa=-0.9028 degrees ! Estimated noise=585.398 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267359 Jy ! Component: 100 - total flux cleaned = 0.00319988 Jy ! Component: 150 - total flux cleaned = 0.00361754 Jy ! Component: 200 - total flux cleaned = 0.00379053 Jy ! Total flux subtracted in 200 components = 0.00379053 Jy ! Clean residual min=-0.002954 max=0.003158 Jy/beam ! Clean residual mean=0.000010 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.0723121 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 85 components and 0.0723121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165821Jy sigma=0.000786 ! Fit after self-cal, rms=0.165806Jy sigma=0.000785 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165806Jy sigma=0.000785 ! Fit after self-cal, rms=0.133382Jy sigma=0.000780 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.398 mas, bpa=-0.7873 degrees ! Estimated noise=599.401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245676 Jy ! Component: 100 - total flux cleaned = 0.00335849 Jy ! Component: 150 - total flux cleaned = 0.00343877 Jy ! Component: 200 - total flux cleaned = 0.00340609 Jy ! Total flux subtracted in 200 components = 0.00340609 Jy ! Clean residual min=-0.002436 max=0.002605 Jy/beam ! Clean residual mean=-0.000000 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0757182 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 88 components and 0.0757182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133280Jy sigma=0.000779 ! Fit after self-cal, rms=0.133237Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-116, 34.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239577 Jy ! Component: 100 - total flux cleaned = 0.00368605 Jy ! Component: 150 - total flux cleaned = 0.00393071 Jy ! Component: 200 - total flux cleaned = 0.00399838 Jy ! Total flux subtracted in 200 components = 0.00399838 Jy ! Clean residual min=-0.002343 max=0.002213 Jy/beam ! Clean residual mean=-0.000001 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.0797165 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 107 components and 0.0797165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133165Jy sigma=0.000778 ! Fit after self-cal, rms=0.133142Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133142Jy sigma=0.000778 ! Fit after self-cal, rms=0.105240Jy sigma=0.000774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.942 mas, bmaj=7.37 mas, bpa=-0.5897 degrees ! Estimated noise=599.027 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117601 Jy ! Component: 100 - total flux cleaned = 0.00146054 Jy ! Component: 150 - total flux cleaned = 0.00146261 Jy ! Component: 200 - total flux cleaned = 0.00140844 Jy ! Total flux subtracted in 200 components = 0.00140844 Jy ! Clean residual min=-0.002004 max=0.001623 Jy/beam ! Clean residual mean=-0.000004 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.081125 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 126 components and 0.081125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105213Jy sigma=0.000774 ! Fit after self-cal, rms=0.105213Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000455323 Jy ! Component: 100 - total flux cleaned = 0.00045869 Jy ! Component: 150 - total flux cleaned = 0.000409868 Jy ! Component: 200 - total flux cleaned = 0.000363217 Jy ! Total flux subtracted in 200 components = 0.000363217 Jy ! Clean residual min=-0.002022 max=0.001684 Jy/beam ! Clean residual mean=-0.000005 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0814882 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 138 components and 0.0814882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105195Jy sigma=0.000773 ! Fit after self-cal, rms=0.105201Jy sigma=0.000773 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105201Jy sigma=0.000773 ! Fit after self-cal, rms=0.104184Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.807 mas, bmaj=16.5 mas, bpa=6.483 degrees ! Estimated noise=811.217 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000447563 Jy ! Component: 100 - total flux cleaned = 0.000632469 Jy ! Component: 150 - total flux cleaned = 0.000677016 Jy ! Component: 200 - total flux cleaned = 0.000714243 Jy ! Total flux subtracted in 200 components = 0.000714243 Jy ! Clean residual min=-0.002097 max=0.002073 Jy/beam ! Clean residual mean=-0.000008 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0822025 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 152 components and 0.0822024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104175Jy sigma=0.000773 ! Fit after self-cal, rms=0.104169Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000206361 Jy ! Component: 100 - total flux cleaned = -0.000258537 Jy ! Component: 150 - total flux cleaned = -0.000319897 Jy ! Component: 200 - total flux cleaned = -0.000363037 Jy ! Total flux subtracted in 200 components = -0.000363037 Jy ! Clean residual min=-0.002195 max=0.002132 Jy/beam ! Clean residual mean=-0.000010 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.0818394 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 161 components and 0.0818394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104166Jy sigma=0.000773 ! Fit after self-cal, rms=0.104155Jy sigma=0.000773 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.93 mas, bmaj=7.333 mas, bpa=-0.5249 degrees ! Estimated noise=598.046 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.93 x 7.333 at -0.5249 degrees (North through East) ! Clean map min=-0.003041 max=0.04975 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.355 mas, bmaj=6.174 mas, bpa=-0.1411 degrees ! Estimated noise=902.199 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0370981 Jy ! Component: 100 - total flux cleaned = 0.0511456 Jy ! Component: 150 - total flux cleaned = 0.0597115 Jy ! Component: 200 - total flux cleaned = 0.0658359 Jy ! Total flux subtracted in 200 components = 0.0658359 Jy ! Clean residual min=-0.003392 max=0.003558 Jy/beam ! Clean residual mean=-0.000003 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.0658359 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.0658359 Jy ! Inverting map and beam ! Estimated beam: bmin=2.93 mas, bmaj=7.333 mas, bpa=-0.5249 degrees ! Estimated noise=598.046 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00620975 Jy ! Component: 100 - total flux cleaned = 0.00989355 Jy ! Component: 150 - total flux cleaned = 0.0119159 Jy ! Component: 200 - total flux cleaned = 0.0129153 Jy ! Total flux subtracted in 200 components = 0.0129153 Jy ! Clean residual min=-0.002277 max=0.001922 Jy/beam ! Clean residual mean=-0.000004 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0787512 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 79 components and 0.0787512 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.807 mas, bmaj=16.5 mas, bpa=6.483 degrees ! Estimated noise=811.217 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159589 Jy ! Component: 100 - total flux cleaned = 0.00205886 Jy ! Component: 150 - total flux cleaned = 0.00246046 Jy ! Component: 200 - total flux cleaned = 0.00271741 Jy ! Total flux subtracted in 200 components = 0.00271741 Jy ! Clean residual min=-0.002475 max=0.002242 Jy/beam ! Clean residual mean=-0.000009 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.0814686 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.21048e-05 Jy ! Component: 100 - total flux cleaned = 8.95674e-05 Jy ! Component: 150 - total flux cleaned = 9.08473e-05 Jy ! Component: 200 - total flux cleaned = 9.21187e-05 Jy ! Total flux subtracted in 200 components = 9.21187e-05 Jy ! Clean residual min=-0.002280 max=0.002186 Jy/beam ! Clean residual mean=-0.000009 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0815607 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 124 components and 0.0815608 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.93 mas, bmaj=7.333 mas, bpa=-0.5249 degrees ! Estimated noise=598.046 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000693791 Jy ! Component: 100 - total flux cleaned = 0.000850856 Jy ! Component: 150 - total flux cleaned = 0.000991332 Jy ! Component: 200 - total flux cleaned = 0.00102137 Jy ! Total flux subtracted in 200 components = 0.00102137 Jy ! Clean residual min=-0.002077 max=0.001714 Jy/beam ! Clean residual mean=-0.000004 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0825821 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 145 components and 0.0825821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104157Jy sigma=0.000773 ! Fit after self-cal, rms=0.104170Jy sigma=0.000772 wmodel J1727-1951_S_2015_03_17_pus_map.mod ! Writing 145 model components to file: J1727-1951_S_2015_03_17_pus_map.mod wobs J1727-1951_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1727-1951_S_2015_03_17_pus_uvs.fits wwins J1727-1951_S_2015_03_17_pus_map.win ! wwins: Wrote 3 windows to J1727-1951_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000672238 Jy ! Component: 100 - total flux cleaned = -0.000861412 Jy ! Component: 150 - total flux cleaned = -0.000980326 Jy ! Component: 200 - total flux cleaned = -0.00115116 Jy ! Component: 250 - total flux cleaned = -0.00134373 Jy ! Component: 300 - total flux cleaned = -0.00150296 Jy ! Component: 350 - total flux cleaned = -0.0017087 Jy ! Component: 400 - total flux cleaned = -0.00180837 Jy ! Component: 450 - total flux cleaned = -0.00188198 Jy ! Component: 500 - total flux cleaned = -0.00204857 Jy ! Component: 550 - total flux cleaned = -0.0021416 Jy ! Component: 600 - total flux cleaned = -0.0022997 Jy ! Component: 650 - total flux cleaned = -0.00236537 Jy ! Component: 700 - total flux cleaned = -0.00245228 Jy ! Component: 750 - total flux cleaned = -0.0025589 Jy ! Component: 800 - total flux cleaned = -0.00257995 Jy ! Component: 850 - total flux cleaned = -0.00264175 Jy ! Component: 900 - total flux cleaned = -0.0026417 Jy ! Component: 950 - total flux cleaned = -0.00270096 Jy ! Component: 1000 - total flux cleaned = -0.00268065 Jy ! Component: 1050 - total flux cleaned = -0.00264244 Jy ! Component: 1100 - total flux cleaned = -0.00264291 Jy ! Component: 1150 - total flux cleaned = -0.00269892 Jy ! Component: 1200 - total flux cleaned = -0.0027169 Jy ! Component: 1250 - total flux cleaned = -0.00269886 Jy ! Component: 1300 - total flux cleaned = -0.00268087 Jy ! Component: 1350 - total flux cleaned = -0.00264588 Jy ! Component: 1400 - total flux cleaned = -0.00262877 Jy ! Component: 1450 - total flux cleaned = -0.00269699 Jy ! Component: 1500 - total flux cleaned = -0.00268015 Jy ! Component: 1550 - total flux cleaned = -0.00266412 Jy ! Component: 1600 - total flux cleaned = -0.00279573 Jy ! Component: 1650 - total flux cleaned = -0.00281195 Jy ! Component: 1700 - total flux cleaned = -0.00277979 Jy ! Component: 1750 - total flux cleaned = -0.00282733 Jy ! Component: 1800 - total flux cleaned = -0.00287381 Jy ! Component: 1850 - total flux cleaned = -0.00291974 Jy ! Component: 1900 - total flux cleaned = -0.00290441 Jy ! Component: 1950 - total flux cleaned = -0.00288979 Jy ! Component: 2000 - total flux cleaned = -0.00293433 Jy ! Component: 2050 - total flux cleaned = -0.00291944 Jy ! Component: 2100 - total flux cleaned = -0.00286129 Jy ! Component: 2150 - total flux cleaned = -0.00287556 Jy ! Component: 2200 - total flux cleaned = -0.00286102 Jy ! Component: 2250 - total flux cleaned = -0.00284686 Jy ! Component: 2300 - total flux cleaned = -0.00279104 Jy ! Component: 2350 - total flux cleaned = -0.00276342 Jy ! Component: 2400 - total flux cleaned = -0.00270899 Jy ! Component: 2450 - total flux cleaned = -0.00270904 Jy ! Component: 2500 - total flux cleaned = -0.00265561 Jy ! Component: 2550 - total flux cleaned = -0.002616 Jy ! Component: 2600 - total flux cleaned = -0.0026028 Jy ! Component: 2650 - total flux cleaned = -0.00257691 Jy ! Component: 2700 - total flux cleaned = -0.00255123 Jy ! Component: 2750 - total flux cleaned = -0.00253833 Jy ! Component: 2800 - total flux cleaned = -0.00250043 Jy ! Component: 2850 - total flux cleaned = -0.00247527 Jy ! Component: 2900 - total flux cleaned = -0.00241331 Jy ! Component: 2950 - total flux cleaned = -0.00237633 Jy ! Component: 3000 - total flux cleaned = -0.00237642 Jy ! Component: 3050 - total flux cleaned = -0.00235224 Jy ! Component: 3100 - total flux cleaned = -0.00230408 Jy ! Component: 3150 - total flux cleaned = -0.00232799 Jy ! Component: 3200 - total flux cleaned = -0.00226885 Jy ! Component: 3250 - total flux cleaned = -0.00225701 Jy ! Component: 3300 - total flux cleaned = -0.00228039 Jy ! Component: 3350 - total flux cleaned = -0.00222255 Jy ! Component: 3400 - total flux cleaned = -0.00221102 Jy ! Component: 3450 - total flux cleaned = -0.00222236 Jy ! Component: 3500 - total flux cleaned = -0.00218838 Jy ! Component: 3550 - total flux cleaned = -0.00221076 Jy ! Component: 3600 - total flux cleaned = -0.00217738 Jy ! Component: 3650 - total flux cleaned = -0.00215536 Jy ! Component: 3700 - total flux cleaned = -0.00212242 Jy ! Component: 3750 - total flux cleaned = -0.00213316 Jy ! Component: 3800 - total flux cleaned = -0.00211149 Jy ! Component: 3850 - total flux cleaned = -0.00211143 Jy ! Component: 3900 - total flux cleaned = -0.00210083 Jy ! Component: 3950 - total flux cleaned = -0.00206891 Jy ! Component: 4000 - total flux cleaned = -0.00207953 Jy ! Component: 4050 - total flux cleaned = -0.00205869 Jy ! Total flux subtracted in 4096 components = -0.00205865 Jy ! Clean residual min=-0.000654 max=0.000572 Jy/beam ! Clean residual mean=-0.000002 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.0805235 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 454 components and 0.0805234 Jy ![Exited script file: muppet] wmap "J1727-1951_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.93 x 7.333 at -0.5249 degrees (North through East) ! Clean map min=-0.0029456 max=0.04976 Jy/beam ! Writing clean map to FITS file: J1727-1951_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0497604 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000191901 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.15695 1.15695 2.3139 4.62781 9.25561 18.5112 37.0225 74.0449 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.049 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.93 x 7.333 at -0.5249 degrees (North through East) ! Clean map min=-0.0029456 max=0.04976 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1727-1951_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:05:41 2016