! Started logfile: J1727-1951_S_2015_01_22_pus_uvs.log on Tue Jan 3 23:00:59 2017 obs J1727-1951_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1727-1951_S_2015_01_22_pus_uva.fits ! AN table 1: 63 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.789418 visibilities/baseline/integration-bin. ! Found source: J1727-1951 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 8952 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1727-1951_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.079835Jy sigma=0.008457 ! Fit after self-cal, rms=0.992593Jy sigma=0.008017 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.337 mas, bmaj=6.322 mas, bpa=-6.678 degrees ! Estimated noise=1236 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0445463 Jy ! Component: 100 - total flux cleaned = 0.0578127 Jy ! Total flux subtracted in 100 components = 0.0578127 Jy ! Clean residual min=-0.006808 max=0.006895 Jy/beam ! Clean residual mean=-0.000019 rms=0.001766 Jy/beam ! Combined flux in latest and established models = 0.0578127 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0578127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.392223Jy sigma=0.000974 ! Fit after self-cal, rms=0.391628Jy sigma=0.000962 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.734 mas, bmaj=7.287 mas, bpa=-6.844 degrees ! Estimated noise=943.861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124052 Jy ! Component: 100 - total flux cleaned = 0.0191043 Jy ! Component: 150 - total flux cleaned = 0.0232817 Jy ! Component: 200 - total flux cleaned = 0.0259385 Jy ! Total flux subtracted in 200 components = 0.0259385 Jy ! Clean residual min=-0.005344 max=0.006960 Jy/beam ! Clean residual mean=-0.000009 rms=0.001518 Jy/beam ! Combined flux in latest and established models = 0.0837512 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 39 components and 0.0837512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389731Jy sigma=0.000963 ! Fit after self-cal, rms=0.389442Jy sigma=0.000962 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.27 FD 1.00* HN 1.33 KP 0.67 ! LA 0.63 MK 1.25 NL 1.39 OV 0.38 ! PT 0.56 SC 1.16 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* HN 1.26 KP 1.10 ! LA 1.11 MK 0.94 NL 1.25 OV 1.22 ! PT 1.26 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00* HN 1.11 KP 1.10 ! LA 0.94 MK 0.90 NL 1.25 OV 1.17 ! PT 1.27 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* HN 0.89 KP 0.93 ! LA 1.04 MK 1.18 NL 1.00 OV 1.22 ! PT 0.97 SC 1.10 ! ! ! Fit before self-cal, rms=0.389442Jy sigma=0.000962 ! Fit after self-cal, rms=0.130102Jy sigma=0.000928 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.807 mas, bmaj=7.386 mas, bpa=-6.565 degrees ! Estimated noise=968.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195765 Jy ! Component: 100 - total flux cleaned = 0.00227279 Jy ! Component: 150 - total flux cleaned = 0.00253684 Jy ! Component: 200 - total flux cleaned = 0.002691 Jy ! Total flux subtracted in 200 components = 0.002691 Jy ! Clean residual min=-0.003853 max=0.004688 Jy/beam ! Clean residual mean=-0.000002 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 0.0864422 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.0864422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130038Jy sigma=0.000928 ! Fit after self-cal, rms=0.130118Jy sigma=0.000918 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130118Jy sigma=0.000918 ! Fit after self-cal, rms=0.134994Jy sigma=0.000915 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=7.338 mas, bpa=-6.52 degrees ! Estimated noise=984.301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231156 Jy ! Component: 100 - total flux cleaned = 0.00301887 Jy ! Component: 150 - total flux cleaned = 0.00324079 Jy ! Component: 200 - total flux cleaned = 0.00344064 Jy ! Total flux subtracted in 200 components = 0.00344064 Jy ! Clean residual min=-0.003588 max=0.004227 Jy/beam ! Clean residual mean=-0.000000 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.0898828 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.0898828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134921Jy sigma=0.000915 ! Fit after self-cal, rms=0.135438Jy sigma=0.000913 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000552725 Jy ! Component: 100 - total flux cleaned = -0.000553894 Jy ! Component: 150 - total flux cleaned = -0.000555233 Jy ! Component: 200 - total flux cleaned = -0.000517508 Jy ! Total flux subtracted in 200 components = -0.000517508 Jy ! Clean residual min=-0.004003 max=0.003959 Jy/beam ! Clean residual mean=-0.000002 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.0893653 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.0893653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135414Jy sigma=0.000913 ! Fit after self-cal, rms=0.135417Jy sigma=0.000913 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135417Jy sigma=0.000913 ! Fit after self-cal, rms=0.141529Jy sigma=0.000912 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.776 mas, bmaj=7.267 mas, bpa=-6.479 degrees ! Estimated noise=1006.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235097 Jy ! Component: 100 - total flux cleaned = 0.00337173 Jy ! Component: 150 - total flux cleaned = 0.00355982 Jy ! Component: 200 - total flux cleaned = 0.00372896 Jy ! Total flux subtracted in 200 components = 0.00372896 Jy ! Clean residual min=-0.003768 max=0.004007 Jy/beam ! Clean residual mean=-0.000001 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.0930943 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.0930943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141463Jy sigma=0.000912 ! Fit after self-cal, rms=0.141858Jy sigma=0.000911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000549596 Jy ! Component: 100 - total flux cleaned = -0.000623227 Jy ! Component: 150 - total flux cleaned = -0.000622948 Jy ! Component: 200 - total flux cleaned = -0.000622481 Jy ! Total flux subtracted in 200 components = -0.000622481 Jy ! Clean residual min=-0.003980 max=0.003922 Jy/beam ! Clean residual mean=-0.000002 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.0924718 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.0924718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141841Jy sigma=0.000911 ! Fit after self-cal, rms=0.141837Jy sigma=0.000911 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141837Jy sigma=0.000911 ! Fit after self-cal, rms=0.148945Jy sigma=0.000911 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.374 mas, bmaj=14.91 mas, bpa=-2.53 degrees ! Estimated noise=1416.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354774 Jy ! Component: 100 - total flux cleaned = 0.00458243 Jy ! Component: 150 - total flux cleaned = 0.00469327 Jy ! Component: 200 - total flux cleaned = 0.00470783 Jy ! Total flux subtracted in 200 components = 0.00470783 Jy ! Clean residual min=-0.004676 max=0.005345 Jy/beam ! Clean residual mean=-0.000002 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.0971797 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 56 components and 0.0971797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148891Jy sigma=0.000911 ! Fit after self-cal, rms=0.149277Jy sigma=0.000911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000532033 Jy ! Component: 100 - total flux cleaned = -0.000599527 Jy ! Component: 150 - total flux cleaned = -0.000652118 Jy ! Component: 200 - total flux cleaned = -0.000667337 Jy ! Total flux subtracted in 200 components = -0.000667337 Jy ! Clean residual min=-0.005118 max=0.005654 Jy/beam ! Clean residual mean=-0.000002 rms=0.001591 Jy/beam ! Combined flux in latest and established models = 0.0965123 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 59 components and 0.0965123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149290Jy sigma=0.000911 ! Fit after self-cal, rms=0.149325Jy sigma=0.000911 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.753 mas, bmaj=7.213 mas, bpa=-6.493 degrees ! Estimated noise=1033.79 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.753 x 7.213 at -6.493 degrees (North through East) ! Clean map min=-0.0037434 max=0.065877 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.349 mas, bmaj=6.31 mas, bpa=-6.28 degrees ! Estimated noise=1358.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0482255 Jy ! Component: 100 - total flux cleaned = 0.0648961 Jy ! Component: 150 - total flux cleaned = 0.0747697 Jy ! Component: 200 - total flux cleaned = 0.081044 Jy ! Total flux subtracted in 200 components = 0.081044 Jy ! Clean residual min=-0.005150 max=0.005133 Jy/beam ! Clean residual mean=-0.000000 rms=0.001423 Jy/beam ! Combined flux in latest and established models = 0.081044 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.081044 Jy ! Inverting map and beam ! Estimated beam: bmin=2.753 mas, bmaj=7.213 mas, bpa=-6.493 degrees ! Estimated noise=1033.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00718179 Jy ! Component: 100 - total flux cleaned = 0.0113003 Jy ! Component: 150 - total flux cleaned = 0.0131398 Jy ! Component: 200 - total flux cleaned = 0.0134679 Jy ! Total flux subtracted in 200 components = 0.0134679 Jy ! Clean residual min=-0.004090 max=0.003948 Jy/beam ! Clean residual mean=-0.000001 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.094512 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 41 components and 0.094512 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.374 mas, bmaj=14.91 mas, bpa=-2.53 degrees ! Estimated noise=1416.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104468 Jy ! Component: 100 - total flux cleaned = 0.000788102 Jy ! Component: 150 - total flux cleaned = 0.000515908 Jy ! Component: 200 - total flux cleaned = 0.000313349 Jy ! Total flux subtracted in 200 components = 0.000313349 Jy ! Clean residual min=-0.005299 max=0.005466 Jy/beam ! Clean residual mean=-0.000000 rms=0.001582 Jy/beam ! Combined flux in latest and established models = 0.0948253 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000218028 Jy ! Component: 100 - total flux cleaned = -0.000443234 Jy ! Component: 150 - total flux cleaned = -0.000586613 Jy ! Component: 200 - total flux cleaned = -0.000741863 Jy ! Total flux subtracted in 200 components = -0.000741863 Jy ! Clean residual min=-0.005303 max=0.005443 Jy/beam ! Clean residual mean=0.000000 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 0.0940834 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 55 components and 0.0940834 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.753 mas, bmaj=7.213 mas, bpa=-6.493 degrees ! Estimated noise=1033.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000610365 Jy ! Component: 100 - total flux cleaned = -0.000474776 Jy ! Component: 150 - total flux cleaned = -0.000528603 Jy ! Component: 200 - total flux cleaned = -0.000526409 Jy ! Total flux subtracted in 200 components = -0.000526409 Jy ! Clean residual min=-0.003918 max=0.004120 Jy/beam ! Clean residual mean=-0.000001 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 0.093557 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.093557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149332Jy sigma=0.000911 ! Fit after self-cal, rms=0.149304Jy sigma=0.000910 wmodel J1727-1951_S_2015_01_22_pus_map.mod ! Writing 72 model components to file: J1727-1951_S_2015_01_22_pus_map.mod wobs J1727-1951_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1727-1951_S_2015_01_22_pus_uvs.fits wwins J1727-1951_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J1727-1951_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000510722 Jy ! Component: 100 - total flux cleaned = -0.000765769 Jy ! Component: 150 - total flux cleaned = -0.00118828 Jy ! Component: 200 - total flux cleaned = -0.00135886 Jy ! Component: 250 - total flux cleaned = -0.00163021 Jy ! Component: 300 - total flux cleaned = -0.00178683 Jy ! Component: 350 - total flux cleaned = -0.00193653 Jy ! Component: 400 - total flux cleaned = -0.00193544 Jy ! Component: 450 - total flux cleaned = -0.00193495 Jy ! Component: 500 - total flux cleaned = -0.00184451 Jy ! Component: 550 - total flux cleaned = -0.00184355 Jy ! Component: 600 - total flux cleaned = -0.00179976 Jy ! Component: 650 - total flux cleaned = -0.00175894 Jy ! Component: 700 - total flux cleaned = -0.00179944 Jy ! Component: 750 - total flux cleaned = -0.00195303 Jy ! Component: 800 - total flux cleaned = -0.00202734 Jy ! Component: 850 - total flux cleaned = -0.00206418 Jy ! Component: 900 - total flux cleaned = -0.0021003 Jy ! Component: 950 - total flux cleaned = -0.00223904 Jy ! Component: 1000 - total flux cleaned = -0.00230592 Jy ! Component: 1050 - total flux cleaned = -0.00247126 Jy ! Component: 1100 - total flux cleaned = -0.0026007 Jy ! Component: 1150 - total flux cleaned = -0.00279026 Jy ! Component: 1200 - total flux cleaned = -0.00275955 Jy ! Component: 1250 - total flux cleaned = -0.00288177 Jy ! Component: 1300 - total flux cleaned = -0.00300119 Jy ! Component: 1350 - total flux cleaned = -0.00303024 Jy ! Component: 1400 - total flux cleaned = -0.00317321 Jy ! Component: 1450 - total flux cleaned = -0.00325762 Jy ! Component: 1500 - total flux cleaned = -0.00342301 Jy ! Component: 1550 - total flux cleaned = -0.00342333 Jy ! Component: 1600 - total flux cleaned = -0.00360988 Jy ! Component: 1650 - total flux cleaned = -0.00371458 Jy ! Component: 1700 - total flux cleaned = -0.00384312 Jy ! Component: 1750 - total flux cleaned = -0.0039442 Jy ! Component: 1800 - total flux cleaned = -0.00401807 Jy ! Component: 1850 - total flux cleaned = -0.00409132 Jy ! Component: 1900 - total flux cleaned = -0.00421146 Jy ! Component: 1950 - total flux cleaned = -0.00433008 Jy ! Component: 2000 - total flux cleaned = -0.00447096 Jy ! Component: 2050 - total flux cleaned = -0.00456331 Jy ! Component: 2100 - total flux cleaned = -0.00470018 Jy ! Component: 2150 - total flux cleaned = -0.00476806 Jy ! Component: 2200 - total flux cleaned = -0.00501316 Jy ! Component: 2250 - total flux cleaned = -0.00525488 Jy ! Component: 2300 - total flux cleaned = -0.00536336 Jy ! Component: 2350 - total flux cleaned = -0.005492 Jy ! Component: 2400 - total flux cleaned = -0.00566208 Jy ! Component: 2450 - total flux cleaned = -0.00578812 Jy ! Component: 2500 - total flux cleaned = -0.00587139 Jy ! Component: 2550 - total flux cleaned = -0.00603637 Jy ! Component: 2600 - total flux cleaned = -0.00615866 Jy ! Component: 2650 - total flux cleaned = -0.00621929 Jy ! Component: 2700 - total flux cleaned = -0.00633959 Jy ! Component: 2750 - total flux cleaned = -0.00643879 Jy ! Component: 2800 - total flux cleaned = -0.00657634 Jy ! Component: 2850 - total flux cleaned = -0.00663473 Jy ! Component: 2900 - total flux cleaned = -0.00675062 Jy ! Component: 2950 - total flux cleaned = -0.00684616 Jy ! Component: 3000 - total flux cleaned = -0.00692216 Jy ! Component: 3050 - total flux cleaned = -0.00699747 Jy ! Component: 3100 - total flux cleaned = -0.00701614 Jy ! Component: 3150 - total flux cleaned = -0.00712774 Jy ! Component: 3200 - total flux cleaned = -0.00714618 Jy ! Component: 3250 - total flux cleaned = -0.00725616 Jy ! Component: 3300 - total flux cleaned = -0.00729248 Jy ! Component: 3350 - total flux cleaned = -0.00727438 Jy ! Component: 3400 - total flux cleaned = -0.00734662 Jy ! Component: 3450 - total flux cleaned = -0.00740039 Jy ! Component: 3500 - total flux cleaned = -0.00743604 Jy ! Component: 3550 - total flux cleaned = -0.00750674 Jy ! Component: 3600 - total flux cleaned = -0.00750686 Jy ! Component: 3650 - total flux cleaned = -0.00752438 Jy ! Component: 3700 - total flux cleaned = -0.00754185 Jy ! Component: 3750 - total flux cleaned = -0.00759379 Jy ! Component: 3800 - total flux cleaned = -0.00762813 Jy ! Component: 3850 - total flux cleaned = -0.00766234 Jy ! Component: 3900 - total flux cleaned = -0.00766234 Jy ! Component: 3950 - total flux cleaned = -0.00769604 Jy ! Component: 4000 - total flux cleaned = -0.00766247 Jy ! Component: 4050 - total flux cleaned = -0.00767928 Jy ! Total flux subtracted in 4096 components = -0.00776261 Jy ! Clean residual min=-0.000887 max=0.001258 Jy/beam ! Clean residual mean=-0.000001 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.0857944 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 351 components and 0.0857944 Jy ![Exited script file: muppet] wmap "J1727-1951_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.753 x 7.213 at -6.493 degrees (North through East) ! Clean map min=-0.0026096 max=0.06584 Jy/beam ! Writing clean map to FITS file: J1727-1951_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0658396 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000264409 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.20479 1.20479 2.40957 4.81914 9.63828 19.2766 38.5531 77.1063 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.065 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.753 x 7.213 at -6.493 degrees (North through East) ! Clean map min=-0.0026096 max=0.06584 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1727-1951_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 23:01:04 2017