! Started logfile: J1726+3213_S_2015_01_22_pus_uvs.log on Tue Jan 3 23:00:54 2017 obs J1726+3213_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1726+3213_S_2015_01_22_pus_uva.fits ! AN table 1: 38 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.333333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1726+3213 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 2280 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1726+3213_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.858476Jy sigma=0.010534 ! Fit after self-cal, rms=0.852204Jy sigma=0.010462 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.239 mas, bmaj=17.5 mas, bpa=24.62 degrees ! Estimated noise=1689.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110646 Jy ! Component: 100 - total flux cleaned = 0.139119 Jy ! Total flux subtracted in 100 components = 0.139119 Jy ! Clean residual min=-0.009957 max=0.014154 Jy/beam ! Clean residual mean=-0.000015 rms=0.003561 Jy/beam ! Combined flux in latest and established models = 0.139119 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.139119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071751Jy sigma=0.000804 ! Fit after self-cal, rms=0.071770Jy sigma=0.000804 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.803 mas, bmaj=18.04 mas, bpa=23.73 degrees ! Estimated noise=1227.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171695 Jy ! Component: 100 - total flux cleaned = 0.0250212 Jy ! Component: 150 - total flux cleaned = 0.0290026 Jy ! Component: 200 - total flux cleaned = 0.0312308 Jy ! Total flux subtracted in 200 components = 0.0312308 Jy ! Clean residual min=-0.005544 max=0.006575 Jy/beam ! Clean residual mean=-0.000020 rms=0.001550 Jy/beam ! Combined flux in latest and established models = 0.170349 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 48 components and 0.170349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067452Jy sigma=0.000760 ! Fit after self-cal, rms=0.067493Jy sigma=0.000760 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.09 ! LA 1.02 MK 1.01 NL 1.00* OV 1.03 ! PT 1.08 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.06 ! LA 0.98 MK 1.01 NL 1.00* OV 1.02 ! PT 1.06 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.92 ! LA 0.81 MK 1.03 NL 1.00* OV 0.94 ! PT 1.03 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.81 ! LA 0.92 MK 0.99 NL 1.00* OV 0.96 ! PT 1.08 SC 0.98 ! ! ! Fit before self-cal, rms=0.067493Jy sigma=0.000760 ! Fit after self-cal, rms=0.062497Jy sigma=0.000730 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=18 mas, bpa=23.75 degrees ! Estimated noise=1220.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296436 Jy ! Component: 100 - total flux cleaned = 0.000314998 Jy ! Component: 150 - total flux cleaned = 0.000314309 Jy ! Component: 200 - total flux cleaned = 0.00027622 Jy ! Total flux subtracted in 200 components = 0.00027622 Jy ! Clean residual min=-0.002543 max=0.002255 Jy/beam ! Clean residual mean=-0.000001 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.170626 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 0.170626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062469Jy sigma=0.000730 ! Fit after self-cal, rms=0.062412Jy sigma=0.000729 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062412Jy sigma=0.000729 ! Fit after self-cal, rms=0.062430Jy sigma=0.000729 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=17.99 mas, bpa=23.74 degrees ! Estimated noise=1220.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000246241 Jy ! Component: 100 - total flux cleaned = 0.000204 Jy ! Component: 150 - total flux cleaned = 0.000203902 Jy ! Component: 200 - total flux cleaned = 0.000214171 Jy ! Total flux subtracted in 200 components = 0.000214171 Jy ! Clean residual min=-0.002630 max=0.002148 Jy/beam ! Clean residual mean=-0.000001 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.17084 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 87 components and 0.17084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062423Jy sigma=0.000729 ! Fit after self-cal, rms=0.062422Jy sigma=0.000729 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.91394e-05 Jy ! Component: 100 - total flux cleaned = 4.07068e-05 Jy ! Component: 150 - total flux cleaned = 4.05603e-05 Jy ! Component: 200 - total flux cleaned = 3.161e-05 Jy ! Total flux subtracted in 200 components = 3.161e-05 Jy ! Clean residual min=-0.002655 max=0.002103 Jy/beam ! Clean residual mean=-0.000001 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.170871 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 100 components and 0.170871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062419Jy sigma=0.000729 ! Fit after self-cal, rms=0.062419Jy sigma=0.000729 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062419Jy sigma=0.000729 ! Fit after self-cal, rms=0.062446Jy sigma=0.000729 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=17.99 mas, bpa=23.74 degrees ! Estimated noise=1220.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.59932e-05 Jy ! Component: 100 - total flux cleaned = 4.95201e-05 Jy ! Component: 150 - total flux cleaned = 2.52432e-05 Jy ! Component: 200 - total flux cleaned = 1.78206e-05 Jy ! Total flux subtracted in 200 components = 1.78206e-05 Jy ! Clean residual min=-0.002689 max=0.002089 Jy/beam ! Clean residual mean=-0.000001 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.170889 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 109 components and 0.170889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062444Jy sigma=0.000729 ! Fit after self-cal, rms=0.062444Jy sigma=0.000729 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.95618e-05 Jy ! Component: 100 - total flux cleaned = -2.7224e-05 Jy ! Component: 150 - total flux cleaned = -3.41557e-05 Jy ! Component: 200 - total flux cleaned = -2.67995e-05 Jy ! Total flux subtracted in 200 components = -2.67995e-05 Jy ! Clean residual min=-0.002700 max=0.002071 Jy/beam ! Clean residual mean=-0.000001 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.170862 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 110 components and 0.170862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062442Jy sigma=0.000729 ! Fit after self-cal, rms=0.062442Jy sigma=0.000729 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062442Jy sigma=0.000729 ! Fit after self-cal, rms=0.062459Jy sigma=0.000729 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.768 mas, bmaj=22.63 mas, bpa=16.39 degrees ! Estimated noise=1563.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.63982e-05 Jy ! Component: 100 - total flux cleaned = 2.27799e-05 Jy ! Component: 150 - total flux cleaned = 2.87201e-05 Jy ! Component: 200 - total flux cleaned = 2.87037e-05 Jy ! Total flux subtracted in 200 components = 2.87037e-05 Jy ! Clean residual min=-0.001600 max=0.001728 Jy/beam ! Clean residual mean=-0.000002 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.170891 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 124 components and 0.170891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062459Jy sigma=0.000729 ! Fit after self-cal, rms=0.062459Jy sigma=0.000729 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.46438e-06 Jy ! Component: 100 - total flux cleaned = -2.1064e-07 Jy ! Component: 150 - total flux cleaned = -5.2118e-06 Jy ! Component: 200 - total flux cleaned = -5.24096e-06 Jy ! Total flux subtracted in 200 components = -5.24096e-06 Jy ! Clean residual min=-0.001614 max=0.001714 Jy/beam ! Clean residual mean=-0.000002 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.170886 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 127 components and 0.170886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062459Jy sigma=0.000729 ! Fit after self-cal, rms=0.062459Jy sigma=0.000729 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=17.99 mas, bpa=23.73 degrees ! Estimated noise=1220.95 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.819 x 17.99 at 23.73 degrees (North through East) ! Clean map min=-0.0025435 max=0.14798 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.263 mas, bmaj=17.44 mas, bpa=24.61 degrees ! Estimated noise=1671.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109397 Jy ! Component: 100 - total flux cleaned = 0.136542 Jy ! Component: 150 - total flux cleaned = 0.150095 Jy ! Component: 200 - total flux cleaned = 0.157807 Jy ! Total flux subtracted in 200 components = 0.157807 Jy ! Clean residual min=-0.004576 max=0.004816 Jy/beam ! Clean residual mean=-0.000001 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.157807 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.157807 Jy ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=17.99 mas, bpa=23.73 degrees ! Estimated noise=1220.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0060069 Jy ! Component: 100 - total flux cleaned = 0.00911213 Jy ! Component: 150 - total flux cleaned = 0.0110024 Jy ! Component: 200 - total flux cleaned = 0.0121226 Jy ! Total flux subtracted in 200 components = 0.0121226 Jy ! Clean residual min=-0.002728 max=0.002409 Jy/beam ! Clean residual mean=0.000000 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.16993 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 58 components and 0.16993 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.768 mas, bmaj=22.63 mas, bpa=16.39 degrees ! Estimated noise=1563.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000721201 Jy ! Component: 100 - total flux cleaned = 0.000860841 Jy ! Component: 150 - total flux cleaned = 0.000948348 Jy ! Component: 200 - total flux cleaned = 0.000992894 Jy ! Total flux subtracted in 200 components = 0.000992894 Jy ! Clean residual min=-0.001638 max=0.001796 Jy/beam ! Clean residual mean=-0.000002 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.170923 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.64075e-05 Jy ! Component: 100 - total flux cleaned = 6.16337e-05 Jy ! Component: 150 - total flux cleaned = 7.23774e-05 Jy ! Component: 200 - total flux cleaned = 9.21112e-05 Jy ! Total flux subtracted in 200 components = 9.21112e-05 Jy ! Clean residual min=-0.001538 max=0.001778 Jy/beam ! Clean residual mean=-0.000002 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.171015 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 98 components and 0.171015 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=17.99 mas, bpa=23.73 degrees ! Estimated noise=1220.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.54565e-05 Jy ! Component: 100 - total flux cleaned = -8.13551e-05 Jy ! Component: 150 - total flux cleaned = -8.18209e-05 Jy ! Component: 200 - total flux cleaned = -5.90359e-05 Jy ! Total flux subtracted in 200 components = -5.90359e-05 Jy ! Clean residual min=-0.002680 max=0.002117 Jy/beam ! Clean residual mean=-0.000001 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.170956 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 112 components and 0.170956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062464Jy sigma=0.000729 ! Fit after self-cal, rms=0.062462Jy sigma=0.000729 wmodel J1726+3213_S_2015_01_22_pus_map.mod ! Writing 112 model components to file: J1726+3213_S_2015_01_22_pus_map.mod wobs J1726+3213_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1726+3213_S_2015_01_22_pus_uvs.fits wwins J1726+3213_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1726+3213_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103658 Jy ! Component: 100 - total flux cleaned = -0.00129674 Jy ! Component: 150 - total flux cleaned = -0.00129665 Jy ! Component: 200 - total flux cleaned = -0.00148239 Jy ! Component: 250 - total flux cleaned = -0.00159795 Jy ! Component: 300 - total flux cleaned = -0.00173614 Jy ! Component: 350 - total flux cleaned = -0.00186928 Jy ! Component: 400 - total flux cleaned = -0.00192111 Jy ! Component: 450 - total flux cleaned = -0.00199491 Jy ! Component: 500 - total flux cleaned = -0.00208924 Jy ! Component: 550 - total flux cleaned = -0.00213523 Jy ! Component: 600 - total flux cleaned = -0.0022673 Jy ! Component: 650 - total flux cleaned = -0.00230989 Jy ! Component: 700 - total flux cleaned = -0.00239315 Jy ! Component: 750 - total flux cleaned = -0.00239307 Jy ! Component: 800 - total flux cleaned = -0.00245295 Jy ! Component: 850 - total flux cleaned = -0.00249215 Jy ! Component: 900 - total flux cleaned = -0.00255014 Jy ! Component: 950 - total flux cleaned = -0.00260712 Jy ! Component: 1000 - total flux cleaned = -0.00271953 Jy ! Component: 1050 - total flux cleaned = -0.00283072 Jy ! Component: 1100 - total flux cleaned = -0.00292307 Jy ! Component: 1150 - total flux cleaned = -0.00299636 Jy ! Component: 1200 - total flux cleaned = -0.0030511 Jy ! Component: 1250 - total flux cleaned = -0.00308746 Jy ! Component: 1300 - total flux cleaned = -0.00310562 Jy ! Component: 1350 - total flux cleaned = -0.00303254 Jy ! Component: 1400 - total flux cleaned = -0.00301371 Jy ! Component: 1450 - total flux cleaned = -0.00295807 Jy ! Component: 1500 - total flux cleaned = -0.00292032 Jy ! Component: 1550 - total flux cleaned = -0.00290118 Jy ! Component: 1600 - total flux cleaned = -0.00286298 Jy ! Component: 1650 - total flux cleaned = -0.00280474 Jy ! Component: 1700 - total flux cleaned = -0.00274552 Jy ! Component: 1750 - total flux cleaned = -0.00270576 Jy ! Component: 1800 - total flux cleaned = -0.00266501 Jy ! Component: 1850 - total flux cleaned = -0.00260264 Jy ! Component: 1900 - total flux cleaned = -0.0025604 Jy ! Component: 1950 - total flux cleaned = -0.00251688 Jy ! Component: 2000 - total flux cleaned = -0.00249477 Jy ! Component: 2050 - total flux cleaned = -0.00244925 Jy ! Component: 2100 - total flux cleaned = -0.00242577 Jy ! Component: 2150 - total flux cleaned = -0.00235406 Jy ! Component: 2200 - total flux cleaned = -0.00232968 Jy ! Component: 2250 - total flux cleaned = -0.0022289 Jy ! Component: 2300 - total flux cleaned = -0.00217691 Jy ! Component: 2350 - total flux cleaned = -0.00209692 Jy ! Component: 2400 - total flux cleaned = -0.00204209 Jy ! Component: 2450 - total flux cleaned = -0.00195745 Jy ! Component: 2500 - total flux cleaned = -0.00189891 Jy ! Component: 2550 - total flux cleaned = -0.00186869 Jy ! Component: 2600 - total flux cleaned = -0.00177658 Jy ! Component: 2650 - total flux cleaned = -0.00171276 Jy ! Component: 2700 - total flux cleaned = -0.00164783 Jy ! Component: 2750 - total flux cleaned = -0.00151332 Jy ! Component: 2800 - total flux cleaned = -0.00144383 Jy ! Component: 2850 - total flux cleaned = -0.00130071 Jy ! Component: 2900 - total flux cleaned = -0.00119011 Jy ! Component: 2950 - total flux cleaned = -0.00111492 Jy ! Component: 3000 - total flux cleaned = -0.000958795 Jy ! Component: 3050 - total flux cleaned = -0.000797485 Jy ! Component: 3100 - total flux cleaned = -0.000756037 Jy ! Component: 3150 - total flux cleaned = -0.0006703 Jy ! Component: 3200 - total flux cleaned = -0.000537283 Jy ! Component: 3250 - total flux cleaned = -0.000445631 Jy ! Component: 3300 - total flux cleaned = -0.000398979 Jy ! Component: 3350 - total flux cleaned = -0.0002543 Jy ! Component: 3400 - total flux cleaned = -0.0001542 Jy ! Component: 3450 - total flux cleaned = -5.16704e-05 Jy ! Component: 3500 - total flux cleaned = 5.35078e-05 Jy ! Component: 3550 - total flux cleaned = 0.000216193 Jy ! Component: 3600 - total flux cleaned = 0.000329077 Jy ! Component: 3650 - total flux cleaned = 0.000503403 Jy ! Component: 3700 - total flux cleaned = 0.000624757 Jy ! Component: 3750 - total flux cleaned = 0.000810449 Jy ! Component: 3800 - total flux cleaned = 0.000937468 Jy ! Component: 3850 - total flux cleaned = 0.00106929 Jy ! Component: 3900 - total flux cleaned = 0.0012715 Jy ! Component: 3950 - total flux cleaned = 0.00141115 Jy ! Component: 4000 - total flux cleaned = 0.00162771 Jy ! Component: 4050 - total flux cleaned = 0.00177739 Jy ! Total flux subtracted in 4096 components = 0.00193154 Jy ! Clean residual min=-0.004382 max=0.004595 Jy/beam ! Clean residual mean=-0.000003 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.172888 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 254 components and 0.172888 Jy ![Exited script file: muppet] wmap "J1726+3213_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.819 x 17.99 at 23.73 degrees (North through East) ! Clean map min=-0.010653 max=0.14838 Jy/beam ! Writing clean map to FITS file: J1726+3213_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.148376 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00129379 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.61589 2.61589 5.23178 10.4636 20.9271 41.8542 83.7085 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0038 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.148 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.819 x 17.99 at 23.73 degrees (North through East) ! Clean map min=-0.010653 max=0.14838 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1726+3213_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 23:00:59 2017