! Started logfile: J1726+0504_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:33:13 2017 obs J1726+0504_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1726+0504_S_2014_01_04_pus_uva.fits ! AN table 1: 118 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J1726+0504 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1726+0504_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.966362Jy sigma=0.012353 ! Fit after self-cal, rms=0.896903Jy sigma=0.011478 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.711 mas, bmaj=5.469 mas, bpa=0.1064 degrees ! Estimated noise=1124.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0805547 Jy ! Component: 100 - total flux cleaned = 0.0990019 Jy ! Total flux subtracted in 100 components = 0.0990019 Jy ! Clean residual min=-0.005334 max=0.006986 Jy/beam ! Clean residual mean=0.000009 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.0990019 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0990019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082906Jy sigma=0.000894 ! Fit after self-cal, rms=0.082843Jy sigma=0.000893 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=6.242 mas, bpa=0.8496 degrees ! Estimated noise=636.673 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105657 Jy ! Component: 100 - total flux cleaned = 0.0157143 Jy ! Component: 150 - total flux cleaned = 0.0186205 Jy ! Component: 200 - total flux cleaned = 0.0203808 Jy ! Total flux subtracted in 200 components = 0.0203808 Jy ! Clean residual min=-0.003815 max=0.003335 Jy/beam ! Clean residual mean=0.000005 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.119383 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 39 components and 0.119383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081445Jy sigma=0.000877 ! Fit after self-cal, rms=0.081499Jy sigma=0.000877 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* KP 1.00* LA 1.05 ! MK 1.00 NL 0.97 OV 0.99 PT 1.00 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 0.97 ! MK 1.01 NL 1.04 OV 1.02 PT 0.95 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* KP 1.00* LA 0.81 ! MK 1.03 NL 1.02 OV 0.93 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* KP 1.00* LA 0.87 ! MK 1.00 NL 1.07 OV 0.99 PT 1.00 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.081499Jy sigma=0.000877 ! Fit after self-cal, rms=0.079221Jy sigma=0.000866 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=6.312 mas, bpa=0.9321 degrees ! Estimated noise=635.097 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158378 Jy ! Component: 100 - total flux cleaned = 0.000232754 Jy ! Component: 150 - total flux cleaned = 0.000210449 Jy ! Component: 200 - total flux cleaned = 0.000210249 Jy ! Total flux subtracted in 200 components = 0.000210249 Jy ! Clean residual min=-0.002196 max=0.002294 Jy/beam ! Clean residual mean=0.000000 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.119593 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.119593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079194Jy sigma=0.000866 ! Fit after self-cal, rms=0.078970Jy sigma=0.000865 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078970Jy sigma=0.000865 ! Fit after self-cal, rms=0.078653Jy sigma=0.000864 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=6.313 mas, bpa=0.8983 degrees ! Estimated noise=635.082 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000233198 Jy ! Component: 100 - total flux cleaned = 0.000169517 Jy ! Component: 150 - total flux cleaned = 0.000116335 Jy ! Component: 200 - total flux cleaned = 8.66829e-05 Jy ! Total flux subtracted in 200 components = 8.66829e-05 Jy ! Clean residual min=-0.002040 max=0.002280 Jy/beam ! Clean residual mean=-0.000001 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.11968 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.11968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078636Jy sigma=0.000864 ! Fit after self-cal, rms=0.078641Jy sigma=0.000864 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19.5, -65). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012594 Jy ! Component: 100 - total flux cleaned = 0.00135263 Jy ! Component: 150 - total flux cleaned = 0.00146297 Jy ! Component: 200 - total flux cleaned = 0.00155267 Jy ! Total flux subtracted in 200 components = 0.00155267 Jy ! Clean residual min=-0.001793 max=0.002030 Jy/beam ! Clean residual mean=0.000000 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.121232 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.121232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078559Jy sigma=0.000863 ! Fit after self-cal, rms=0.078582Jy sigma=0.000863 ! Inverting map ! Added new window around map position (45, -42.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118267 Jy ! Component: 100 - total flux cleaned = 0.00138136 Jy ! Component: 150 - total flux cleaned = 0.00157959 Jy ! Component: 200 - total flux cleaned = 0.0018163 Jy ! Total flux subtracted in 200 components = 0.0018163 Jy ! Clean residual min=-0.001652 max=0.001654 Jy/beam ! Clean residual mean=-0.000000 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.123049 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 83 components and 0.123049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078519Jy sigma=0.000863 ! Fit after self-cal, rms=0.078505Jy sigma=0.000863 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078505Jy sigma=0.000863 ! Fit after self-cal, rms=0.078179Jy sigma=0.000863 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=6.316 mas, bpa=0.9946 degrees ! Estimated noise=633.773 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000400187 Jy ! Component: 100 - total flux cleaned = 0.000583853 Jy ! Component: 150 - total flux cleaned = 0.000696251 Jy ! Component: 200 - total flux cleaned = 0.000778288 Jy ! Total flux subtracted in 200 components = 0.000778288 Jy ! Clean residual min=-0.001547 max=0.001597 Jy/beam ! Clean residual mean=-0.000001 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.123827 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 95 components and 0.123827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078158Jy sigma=0.000863 ! Fit after self-cal, rms=0.078140Jy sigma=0.000863 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (121.5, -124.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149084 Jy ! Component: 100 - total flux cleaned = 0.00176617 Jy ! Component: 150 - total flux cleaned = 0.00173776 Jy ! Component: 200 - total flux cleaned = 0.00175905 Jy ! Total flux subtracted in 200 components = 0.00175905 Jy ! Clean residual min=-0.001453 max=0.001356 Jy/beam ! Clean residual mean=-0.000000 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.125586 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 112 components and 0.125586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078104Jy sigma=0.000862 ! Fit after self-cal, rms=0.078096Jy sigma=0.000862 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078096Jy sigma=0.000862 ! Fit after self-cal, rms=0.078015Jy sigma=0.000862 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.411 mas, bmaj=10.57 mas, bpa=4.05 degrees ! Estimated noise=748.878 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000162998 Jy ! Component: 100 - total flux cleaned = 6.504e-05 Jy ! Component: 150 - total flux cleaned = 6.38089e-05 Jy ! Component: 200 - total flux cleaned = 2.09389e-05 Jy ! Total flux subtracted in 200 components = 2.09389e-05 Jy ! Clean residual min=-0.000866 max=0.000988 Jy/beam ! Clean residual mean=-0.000001 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.125607 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 132 components and 0.125607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078011Jy sigma=0.000862 ! Fit after self-cal, rms=0.078004Jy sigma=0.000862 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-123.5, 14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000860989 Jy ! Component: 100 - total flux cleaned = 0.00124577 Jy ! Component: 150 - total flux cleaned = 0.00140929 Jy ! Component: 200 - total flux cleaned = 0.00152861 Jy ! Total flux subtracted in 200 components = 0.00152861 Jy ! Clean residual min=-0.000855 max=0.000808 Jy/beam ! Clean residual mean=-0.000001 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.127136 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 153 components and 0.127136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077988Jy sigma=0.000862 ! Fit after self-cal, rms=0.077985Jy sigma=0.000862 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.345 mas, bmaj=6.317 mas, bpa=0.9982 degrees ! Estimated noise=632.999 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.345 x 6.317 at 0.9982 degrees (North through East) ! Clean map min=-0.0013887 max=0.10576 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.702 mas, bmaj=5.52 mas, bpa=0.6015 degrees ! Estimated noise=1125.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0805496 Jy ! Component: 100 - total flux cleaned = 0.0992324 Jy ! Component: 150 - total flux cleaned = 0.107602 Jy ! Component: 200 - total flux cleaned = 0.112407 Jy ! Total flux subtracted in 200 components = 0.112407 Jy ! Clean residual min=-0.004715 max=0.003960 Jy/beam ! Clean residual mean=0.000003 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.112408 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.112408 Jy ! Inverting map and beam ! Estimated beam: bmin=3.345 mas, bmaj=6.317 mas, bpa=0.9982 degrees ! Estimated noise=632.999 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040884 Jy ! Component: 100 - total flux cleaned = 0.00664473 Jy ! Component: 150 - total flux cleaned = 0.00828844 Jy ! Component: 200 - total flux cleaned = 0.00912029 Jy ! Total flux subtracted in 200 components = 0.00912029 Jy ! Clean residual min=-0.001798 max=0.001559 Jy/beam ! Clean residual mean=0.000001 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.121528 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 51 components and 0.121528 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.411 mas, bmaj=10.57 mas, bpa=4.05 degrees ! Estimated noise=748.878 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150388 Jy ! Component: 100 - total flux cleaned = 0.00251402 Jy ! Component: 150 - total flux cleaned = 0.00324804 Jy ! Component: 200 - total flux cleaned = 0.00376228 Jy ! Total flux subtracted in 200 components = 0.00376228 Jy ! Clean residual min=-0.001063 max=0.000850 Jy/beam ! Clean residual mean=0.000000 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.12529 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000426524 Jy ! Component: 100 - total flux cleaned = 0.000702106 Jy ! Component: 150 - total flux cleaned = 0.000999759 Jy ! Component: 200 - total flux cleaned = 0.00119742 Jy ! Total flux subtracted in 200 components = 0.00119742 Jy ! Clean residual min=-0.000983 max=0.000763 Jy/beam ! Clean residual mean=0.000000 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.126487 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 90 components and 0.126487 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.345 mas, bmaj=6.317 mas, bpa=0.9982 degrees ! Estimated noise=632.999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000304934 Jy ! Component: 100 - total flux cleaned = 7.66896e-05 Jy ! Component: 150 - total flux cleaned = 3.8516e-05 Jy ! Component: 200 - total flux cleaned = 0.000115002 Jy ! Total flux subtracted in 200 components = 0.000115002 Jy ! Clean residual min=-0.001367 max=0.001358 Jy/beam ! Clean residual mean=-0.000000 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.126603 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 111 components and 0.126603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078017Jy sigma=0.000862 ! Fit after self-cal, rms=0.078000Jy sigma=0.000862 wmodel J1726+0504_S_2014_01_04_pus_map.mod ! Writing 111 model components to file: J1726+0504_S_2014_01_04_pus_map.mod wobs J1726+0504_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1726+0504_S_2014_01_04_pus_uvs.fits wwins J1726+0504_S_2014_01_04_pus_map.win ! wwins: Wrote 6 windows to J1726+0504_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000200433 Jy ! Component: 100 - total flux cleaned = -0.000335274 Jy ! Component: 150 - total flux cleaned = -0.000486269 Jy ! Component: 200 - total flux cleaned = -0.00065256 Jy ! Component: 250 - total flux cleaned = -0.000792664 Jy ! Component: 300 - total flux cleaned = -0.000890072 Jy ! Component: 350 - total flux cleaned = -0.00102205 Jy ! Component: 400 - total flux cleaned = -0.00111323 Jy ! Component: 450 - total flux cleaned = -0.00120226 Jy ! Component: 500 - total flux cleaned = -0.00128932 Jy ! Component: 550 - total flux cleaned = -0.001391 Jy ! Component: 600 - total flux cleaned = -0.00144066 Jy ! Component: 650 - total flux cleaned = -0.00152166 Jy ! Component: 700 - total flux cleaned = -0.00153772 Jy ! Component: 750 - total flux cleaned = -0.00161551 Jy ! Component: 800 - total flux cleaned = -0.00172171 Jy ! Component: 850 - total flux cleaned = -0.00172182 Jy ! Component: 900 - total flux cleaned = -0.00176554 Jy ! Component: 950 - total flux cleaned = -0.00179409 Jy ! Component: 1000 - total flux cleaned = -0.00182218 Jy ! Component: 1050 - total flux cleaned = -0.00180821 Jy ! Component: 1100 - total flux cleaned = -0.00179441 Jy ! Component: 1150 - total flux cleaned = -0.00176756 Jy ! Component: 1200 - total flux cleaned = -0.00174106 Jy ! Component: 1250 - total flux cleaned = -0.00170183 Jy ! Component: 1300 - total flux cleaned = -0.0016762 Jy ! Component: 1350 - total flux cleaned = -0.00163825 Jy ! Component: 1400 - total flux cleaned = -0.00161316 Jy ! Component: 1450 - total flux cleaned = -0.00156395 Jy ! Component: 1500 - total flux cleaned = -0.00153982 Jy ! Component: 1550 - total flux cleaned = -0.0015161 Jy ! Component: 1600 - total flux cleaned = -0.00150445 Jy ! Component: 1650 - total flux cleaned = -0.00150458 Jy ! Component: 1700 - total flux cleaned = -0.00150443 Jy ! Component: 1750 - total flux cleaned = -0.00144753 Jy ! Component: 1800 - total flux cleaned = -0.0014589 Jy ! Component: 1850 - total flux cleaned = -0.00142564 Jy ! Component: 1900 - total flux cleaned = -0.0014585 Jy ! Component: 1950 - total flux cleaned = -0.00144752 Jy ! Component: 2000 - total flux cleaned = -0.00141523 Jy ! Component: 2050 - total flux cleaned = -0.00141512 Jy ! Component: 2100 - total flux cleaned = -0.00138349 Jy ! Component: 2150 - total flux cleaned = -0.00138348 Jy ! Component: 2200 - total flux cleaned = -0.00139386 Jy ! Component: 2250 - total flux cleaned = -0.00139383 Jy ! Component: 2300 - total flux cleaned = -0.00139387 Jy ! Component: 2350 - total flux cleaned = -0.00141395 Jy ! Component: 2400 - total flux cleaned = -0.00142381 Jy ! Component: 2450 - total flux cleaned = -0.00141399 Jy ! Component: 2500 - total flux cleaned = -0.00145325 Jy ! Component: 2550 - total flux cleaned = -0.00149208 Jy ! Component: 2600 - total flux cleaned = -0.00147273 Jy ! Component: 2650 - total flux cleaned = -0.00149193 Jy ! Component: 2700 - total flux cleaned = -0.0014919 Jy ! Component: 2750 - total flux cleaned = -0.00152957 Jy ! Component: 2800 - total flux cleaned = -0.00153889 Jy ! Component: 2850 - total flux cleaned = -0.00153902 Jy ! Component: 2900 - total flux cleaned = -0.00158522 Jy ! Component: 2950 - total flux cleaned = -0.00163115 Jy ! Component: 3000 - total flux cleaned = -0.0016858 Jy ! Component: 3050 - total flux cleaned = -0.0017311 Jy ! Component: 3100 - total flux cleaned = -0.00178502 Jy ! Component: 3150 - total flux cleaned = -0.00182975 Jy ! Component: 3200 - total flux cleaned = -0.00185646 Jy ! Component: 3250 - total flux cleaned = -0.00190062 Jy ! Component: 3300 - total flux cleaned = -0.00192701 Jy ! Component: 3350 - total flux cleaned = -0.00197075 Jy ! Component: 3400 - total flux cleaned = -0.00197072 Jy ! Component: 3450 - total flux cleaned = -0.00198807 Jy ! Component: 3500 - total flux cleaned = -0.00202257 Jy ! Component: 3550 - total flux cleaned = -0.00203115 Jy ! Component: 3600 - total flux cleaned = -0.00203119 Jy ! Component: 3650 - total flux cleaned = -0.00203975 Jy ! Component: 3700 - total flux cleaned = -0.00206517 Jy ! Component: 3750 - total flux cleaned = -0.00207363 Jy ! Component: 3800 - total flux cleaned = -0.00207357 Jy ! Component: 3850 - total flux cleaned = -0.00209038 Jy ! Component: 3900 - total flux cleaned = -0.00210716 Jy ! Component: 3950 - total flux cleaned = -0.00209889 Jy ! Component: 4000 - total flux cleaned = -0.00209886 Jy ! Component: 4050 - total flux cleaned = -0.00210716 Jy ! Total flux subtracted in 4096 components = -0.00213195 Jy ! Clean residual min=-0.000653 max=0.000634 Jy/beam ! Clean residual mean=-0.000001 rms=0.000135 Jy/beam ! Combined flux in latest and established models = 0.124471 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 361 components and 0.124471 Jy ![Exited script file: muppet] wmap "J1726+0504_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.345 x 6.317 at 0.9982 degrees (North through East) ! Clean map min=-0.0012472 max=0.10571 Jy/beam ! Writing clean map to FITS file: J1726+0504_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.105709 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000135743 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.385236 0.385236 0.770471 1.54094 3.08189 6.16377 12.3275 24.6551 49.3102 98.6203 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.105 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.345 x 6.317 at 0.9982 degrees (North through East) ! Clean map min=-0.0012472 max=0.10571 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1726+0504_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:33:17 2017