! Started logfile: J1724-1443_S_2015_01_22_pus_uvs.log on Tue Jan 3 23:00:44 2017 obs J1724-1443_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1724-1443_S_2015_01_22_pus_uva.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1724-1443 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 4176 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1724-1443_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.773076Jy sigma=0.007847 ! Fit after self-cal, rms=0.735954Jy sigma=0.007453 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.4 mas, bmaj=6.454 mas, bpa=-6.269 degrees ! Estimated noise=1382.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.210301 Jy ! Component: 100 - total flux cleaned = 0.260122 Jy ! Total flux subtracted in 100 components = 0.260122 Jy ! Clean residual min=-0.015743 max=0.025573 Jy/beam ! Clean residual mean=0.000022 rms=0.004717 Jy/beam ! Combined flux in latest and established models = 0.260122 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.260122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101487Jy sigma=0.000989 ! Fit after self-cal, rms=0.101483Jy sigma=0.000989 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.8 mas, bmaj=7.314 mas, bpa=-5.678 degrees ! Estimated noise=1082.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0228509 Jy ! Component: 100 - total flux cleaned = 0.0331863 Jy ! Component: 150 - total flux cleaned = 0.0344956 Jy ! Component: 200 - total flux cleaned = 0.0342982 Jy ! Total flux subtracted in 200 components = 0.0342982 Jy ! Clean residual min=-0.013380 max=0.023529 Jy/beam ! Clean residual mean=0.000035 rms=0.004629 Jy/beam ! Combined flux in latest and established models = 0.294421 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 30 components and 0.294421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097787Jy sigma=0.000927 ! Fit after self-cal, rms=0.097787Jy sigma=0.000927 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 0.95 KP 1.03 ! LA 1.62 MK 1.05 NL 0.98 OV 0.91 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.96 KP 1.01 ! LA 1.55 MK 1.04 NL 1.04 OV 0.92 ! PT 0.95 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.00* HN 0.96 KP 0.82 ! LA 1.37 MK 1.06 NL 1.01 OV 0.86 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 0.91 KP 0.77 ! LA 1.44 MK 1.04 NL 0.96 OV 0.92 ! PT 1.00 SC 1.00 ! ! ! Fit before self-cal, rms=0.097787Jy sigma=0.000927 ! Fit after self-cal, rms=0.091851Jy sigma=0.000775 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.82 mas, bmaj=7.372 mas, bpa=-5.532 degrees ! Estimated noise=1075.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.03025e-05 Jy ! Component: 100 - total flux cleaned = 6.29773e-05 Jy ! Component: 150 - total flux cleaned = 0.000182689 Jy ! Component: 200 - total flux cleaned = 0.000251263 Jy ! Total flux subtracted in 200 components = 0.000251263 Jy ! Clean residual min=-0.003413 max=0.003653 Jy/beam ! Clean residual mean=-0.000001 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.294672 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 37 components and 0.294672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091811Jy sigma=0.000774 ! Fit after self-cal, rms=0.092109Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092109Jy sigma=0.000774 ! Fit after self-cal, rms=0.092274Jy sigma=0.000774 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=7.376 mas, bpa=-5.517 degrees ! Estimated noise=1076.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.55361e-05 Jy ! Component: 100 - total flux cleaned = 0.000108056 Jy ! Component: 150 - total flux cleaned = 0.00018894 Jy ! Component: 200 - total flux cleaned = 0.00025839 Jy ! Total flux subtracted in 200 components = 0.00025839 Jy ! Clean residual min=-0.003396 max=0.003736 Jy/beam ! Clean residual mean=-0.000001 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.29493 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.29493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092257Jy sigma=0.000774 ! Fit after self-cal, rms=0.092257Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.13299e-05 Jy ! Component: 100 - total flux cleaned = 0.000129367 Jy ! Component: 150 - total flux cleaned = 0.000128039 Jy ! Component: 200 - total flux cleaned = 0.000127181 Jy ! Total flux subtracted in 200 components = 0.000127181 Jy ! Clean residual min=-0.003381 max=0.003745 Jy/beam ! Clean residual mean=-0.000001 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.295057 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.295057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092250Jy sigma=0.000773 ! Fit after self-cal, rms=0.092251Jy sigma=0.000773 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092251Jy sigma=0.000773 ! Fit after self-cal, rms=0.092390Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=7.378 mas, bpa=-5.502 degrees ! Estimated noise=1077.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000256638 Jy ! Component: 100 - total flux cleaned = 0.000293234 Jy ! Component: 150 - total flux cleaned = 0.000309315 Jy ! Component: 200 - total flux cleaned = 0.000338504 Jy ! Total flux subtracted in 200 components = 0.000338504 Jy ! Clean residual min=-0.003378 max=0.003785 Jy/beam ! Clean residual mean=-0.000002 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.295396 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.295396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092384Jy sigma=0.000773 ! Fit after self-cal, rms=0.092386Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-61, -33). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340978 Jy ! Component: 100 - total flux cleaned = 0.00505278 Jy ! Component: 150 - total flux cleaned = 0.00555194 Jy ! Component: 200 - total flux cleaned = 0.00606912 Jy ! Total flux subtracted in 200 components = 0.00606912 Jy ! Clean residual min=-0.002996 max=0.002974 Jy/beam ! Clean residual mean=-0.000000 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.301465 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 75 components and 0.301465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092215Jy sigma=0.000772 ! Fit after self-cal, rms=0.092206Jy sigma=0.000772 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092206Jy sigma=0.000772 ! Fit after self-cal, rms=0.092021Jy sigma=0.000772 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.834 mas, bmaj=13.8 mas, bpa=-3.518 degrees ! Estimated noise=1480.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141836 Jy ! Component: 100 - total flux cleaned = 0.00200725 Jy ! Component: 150 - total flux cleaned = 0.00228891 Jy ! Component: 200 - total flux cleaned = 0.00253666 Jy ! Total flux subtracted in 200 components = 0.00253666 Jy ! Clean residual min=-0.003665 max=0.003229 Jy/beam ! Clean residual mean=-0.000000 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.304002 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 102 components and 0.304002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092008Jy sigma=0.000772 ! Fit after self-cal, rms=0.092008Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.61097e-05 Jy ! Component: 100 - total flux cleaned = 0.000331775 Jy ! Component: 150 - total flux cleaned = 0.000556967 Jy ! Component: 200 - total flux cleaned = 0.00075386 Jy ! Total flux subtracted in 200 components = 0.00075386 Jy ! Clean residual min=-0.003559 max=0.003227 Jy/beam ! Clean residual mean=-0.000000 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.304756 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 113 components and 0.304756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092007Jy sigma=0.000772 ! Fit after self-cal, rms=0.092009Jy sigma=0.000772 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.822 mas, bmaj=7.379 mas, bpa=-5.486 degrees ! Estimated noise=1077.21 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.822 x 7.379 at -5.486 degrees (North through East) ! Clean map min=-0.0028888 max=0.27428 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.423 mas, bmaj=6.529 mas, bpa=-6.169 degrees ! Estimated noise=1367.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.207923 Jy ! Component: 100 - total flux cleaned = 0.255446 Jy ! Component: 150 - total flux cleaned = 0.274682 Jy ! Component: 200 - total flux cleaned = 0.284749 Jy ! Total flux subtracted in 200 components = 0.284749 Jy ! Clean residual min=-0.005503 max=0.005224 Jy/beam ! Clean residual mean=-0.000002 rms=0.001394 Jy/beam ! Combined flux in latest and established models = 0.284749 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.284749 Jy ! Inverting map and beam ! Estimated beam: bmin=2.822 mas, bmaj=7.379 mas, bpa=-5.486 degrees ! Estimated noise=1077.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00717842 Jy ! Component: 100 - total flux cleaned = 0.0113593 Jy ! Component: 150 - total flux cleaned = 0.0142989 Jy ! Component: 200 - total flux cleaned = 0.0162884 Jy ! Total flux subtracted in 200 components = 0.0162884 Jy ! Clean residual min=-0.003199 max=0.003090 Jy/beam ! Clean residual mean=-0.000000 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 0.301037 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 38 components and 0.301038 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.834 mas, bmaj=13.8 mas, bpa=-3.518 degrees ! Estimated noise=1480.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023146 Jy ! Component: 100 - total flux cleaned = 0.00369595 Jy ! Component: 150 - total flux cleaned = 0.0041424 Jy ! Component: 200 - total flux cleaned = 0.00440583 Jy ! Total flux subtracted in 200 components = 0.00440583 Jy ! Clean residual min=-0.003526 max=0.003315 Jy/beam ! Clean residual mean=-0.000001 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.305443 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000201435 Jy ! Component: 100 - total flux cleaned = 0.000375774 Jy ! Component: 150 - total flux cleaned = 0.000532139 Jy ! Component: 200 - total flux cleaned = 0.000669427 Jy ! Total flux subtracted in 200 components = 0.000669427 Jy ! Clean residual min=-0.003491 max=0.003347 Jy/beam ! Clean residual mean=-0.000000 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.306113 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 62 components and 0.306113 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.822 mas, bmaj=7.379 mas, bpa=-5.486 degrees ! Estimated noise=1077.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.4525e-05 Jy ! Component: 100 - total flux cleaned = -0.000161466 Jy ! Component: 150 - total flux cleaned = -0.000199718 Jy ! Component: 200 - total flux cleaned = -0.000271707 Jy ! Total flux subtracted in 200 components = -0.000271707 Jy ! Clean residual min=-0.003035 max=0.002958 Jy/beam ! Clean residual mean=-0.000000 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.305841 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 77 components and 0.305841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092014Jy sigma=0.000772 ! Fit after self-cal, rms=0.092007Jy sigma=0.000772 wmodel J1724-1443_S_2015_01_22_pus_map.mod ! Writing 77 model components to file: J1724-1443_S_2015_01_22_pus_map.mod wobs J1724-1443_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1724-1443_S_2015_01_22_pus_uvs.fits wwins J1724-1443_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J1724-1443_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000435989 Jy ! Component: 100 - total flux cleaned = -0.000987264 Jy ! Component: 150 - total flux cleaned = -0.00141126 Jy ! Component: 200 - total flux cleaned = -0.00141058 Jy ! Component: 250 - total flux cleaned = -0.0014542 Jy ! Component: 300 - total flux cleaned = -0.00145432 Jy ! Component: 350 - total flux cleaned = -0.00149467 Jy ! Component: 400 - total flux cleaned = -0.00145707 Jy ! Component: 450 - total flux cleaned = -0.00145779 Jy ! Component: 500 - total flux cleaned = -0.00153081 Jy ! Component: 550 - total flux cleaned = -0.00156643 Jy ! Component: 600 - total flux cleaned = -0.00163523 Jy ! Component: 650 - total flux cleaned = -0.00173481 Jy ! Component: 700 - total flux cleaned = -0.00176665 Jy ! Component: 750 - total flux cleaned = -0.00179828 Jy ! Component: 800 - total flux cleaned = -0.00189071 Jy ! Component: 850 - total flux cleaned = -0.001921 Jy ! Component: 900 - total flux cleaned = -0.00197967 Jy ! Component: 950 - total flux cleaned = -0.0020666 Jy ! Component: 1000 - total flux cleaned = -0.00217927 Jy ! Component: 1050 - total flux cleaned = -0.00220703 Jy ! Component: 1100 - total flux cleaned = -0.00231454 Jy ! Component: 1150 - total flux cleaned = -0.00234007 Jy ! Component: 1200 - total flux cleaned = -0.00233921 Jy ! Component: 1250 - total flux cleaned = -0.00238995 Jy ! Component: 1300 - total flux cleaned = -0.00241513 Jy ! Component: 1350 - total flux cleaned = -0.00241544 Jy ! Component: 1400 - total flux cleaned = -0.00244004 Jy ! Component: 1450 - total flux cleaned = -0.00246431 Jy ! Component: 1500 - total flux cleaned = -0.00246452 Jy ! Component: 1550 - total flux cleaned = -0.00255727 Jy ! Component: 1600 - total flux cleaned = -0.00257991 Jy ! Component: 1650 - total flux cleaned = -0.00262439 Jy ! Component: 1700 - total flux cleaned = -0.00266831 Jy ! Component: 1750 - total flux cleaned = -0.00271192 Jy ! Component: 1800 - total flux cleaned = -0.00273334 Jy ! Component: 1850 - total flux cleaned = -0.00273328 Jy ! Component: 1900 - total flux cleaned = -0.0026916 Jy ! Component: 1950 - total flux cleaned = -0.00265046 Jy ! Component: 2000 - total flux cleaned = -0.0026301 Jy ! Component: 2050 - total flux cleaned = -0.0025697 Jy ! Component: 2100 - total flux cleaned = -0.00249077 Jy ! Component: 2150 - total flux cleaned = -0.00251051 Jy ! Component: 2200 - total flux cleaned = -0.00243301 Jy ! Component: 2250 - total flux cleaned = -0.00239471 Jy ! Component: 2300 - total flux cleaned = -0.00235678 Jy ! Component: 2350 - total flux cleaned = -0.00230045 Jy ! Component: 2400 - total flux cleaned = -0.00228184 Jy ! Component: 2450 - total flux cleaned = -0.00224521 Jy ! Component: 2500 - total flux cleaned = -0.00222703 Jy ! Component: 2550 - total flux cleaned = -0.00220909 Jy ! Component: 2600 - total flux cleaned = -0.00219133 Jy ! Component: 2650 - total flux cleaned = -0.00217367 Jy ! Component: 2700 - total flux cleaned = -0.0021388 Jy ! Component: 2750 - total flux cleaned = -0.00215621 Jy ! Component: 2800 - total flux cleaned = -0.00219042 Jy ! Component: 2850 - total flux cleaned = -0.00217356 Jy ! Component: 2900 - total flux cleaned = -0.00220736 Jy ! Component: 2950 - total flux cleaned = -0.00220727 Jy ! Component: 3000 - total flux cleaned = -0.00217414 Jy ! Component: 3050 - total flux cleaned = -0.00215789 Jy ! Component: 3100 - total flux cleaned = -0.00217421 Jy ! Component: 3150 - total flux cleaned = -0.00214181 Jy ! Component: 3200 - total flux cleaned = -0.00207784 Jy ! Component: 3250 - total flux cleaned = -0.00209383 Jy ! Component: 3300 - total flux cleaned = -0.00206234 Jy ! Component: 3350 - total flux cleaned = -0.00207798 Jy ! Component: 3400 - total flux cleaned = -0.00201587 Jy ! Component: 3450 - total flux cleaned = -0.00200064 Jy ! Component: 3500 - total flux cleaned = -0.00198537 Jy ! Component: 3550 - total flux cleaned = -0.00195512 Jy ! Component: 3600 - total flux cleaned = -0.00193994 Jy ! Component: 3650 - total flux cleaned = -0.0019248 Jy ! Component: 3700 - total flux cleaned = -0.00189482 Jy ! Component: 3750 - total flux cleaned = -0.00183535 Jy ! Component: 3800 - total flux cleaned = -0.00180581 Jy ! Component: 3850 - total flux cleaned = -0.00176161 Jy ! Component: 3900 - total flux cleaned = -0.00174712 Jy ! Component: 3950 - total flux cleaned = -0.00170348 Jy ! Component: 4000 - total flux cleaned = -0.00170348 Jy ! Component: 4050 - total flux cleaned = -0.00163145 Jy ! Total flux subtracted in 4096 components = -0.00163153 Jy ! Clean residual min=-0.000913 max=0.000862 Jy/beam ! Clean residual mean=-0.000001 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.30421 Jy keep ! Adding 238 model components to the UV plane model. ! The established model now contains 315 components and 0.304209 Jy ![Exited script file: muppet] wmap "J1724-1443_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.822 x 7.379 at -5.486 degrees (North through East) ! Clean map min=-0.0020099 max=0.27374 Jy/beam ! Writing clean map to FITS file: J1724-1443_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.273745 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000243224 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.266552 0.266552 0.533105 1.06621 2.13242 4.26484 8.52967 17.0593 34.1187 68.2374 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.273 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.822 x 7.379 at -5.486 degrees (North through East) ! Clean map min=-0.0020099 max=0.27374 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1724-1443_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 23:00:49 2017