! Started logfile: J1722-0503_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:33:08 2017 obs J1722-0503_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1722-0503_S_2014_01_04_pus_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.501111 visibilities/baseline/integration-bin. ! Found source: J1722-0503 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5412 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1722-0503_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.900340Jy sigma=0.012915 ! Fit after self-cal, rms=0.858954Jy sigma=0.012531 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.518 mas, bmaj=5.385 mas, bpa=1.107 degrees ! Estimated noise=1143.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105011 Jy ! Component: 100 - total flux cleaned = 0.130842 Jy ! Total flux subtracted in 100 components = 0.130842 Jy ! Clean residual min=-0.012283 max=0.016271 Jy/beam ! Clean residual mean=0.000016 rms=0.003590 Jy/beam ! Combined flux in latest and established models = 0.130842 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.130842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168729Jy sigma=0.001179 ! Fit after self-cal, rms=0.168726Jy sigma=0.001178 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=6.149 mas, bpa=-0.1065 degrees ! Estimated noise=809.433 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011919 Jy ! Component: 100 - total flux cleaned = 0.0175688 Jy ! Component: 150 - total flux cleaned = 0.0201411 Jy ! Component: 200 - total flux cleaned = 0.0207524 Jy ! Total flux subtracted in 200 components = 0.0207524 Jy ! Clean residual min=-0.012636 max=0.018953 Jy/beam ! Clean residual mean=0.000029 rms=0.004317 Jy/beam ! Combined flux in latest and established models = 0.151595 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 24 components and 0.151595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166286Jy sigma=0.001205 ! Fit after self-cal, rms=0.166301Jy sigma=0.001205 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.47 FD 1.00* KP 1.00* LA 0.93 ! MK 0.97 NL 0.96 OV 0.96 PT 0.98 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.81 FD 1.00* KP 1.00* LA 0.93 ! MK 0.99 NL 1.09 OV 0.84 PT 0.99 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 0.75 ! MK 1.03 NL 0.98 OV 0.78 PT 1.02 ! SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* KP 1.00* LA 0.88 ! MK 1.05 NL 1.04 OV 0.93 PT 0.81 ! SC 0.90 ! ! ! Fit before self-cal, rms=0.166301Jy sigma=0.001205 ! Fit after self-cal, rms=0.142864Jy sigma=0.001043 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.922 mas, bmaj=6.279 mas, bpa=0.03969 degrees ! Estimated noise=844.976 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00688857 Jy ! Component: 100 - total flux cleaned = 0.00881472 Jy ! Component: 150 - total flux cleaned = 0.00900304 Jy ! Component: 200 - total flux cleaned = 0.00900084 Jy ! Total flux subtracted in 200 components = 0.00900084 Jy ! Clean residual min=-0.010966 max=0.009033 Jy/beam ! Clean residual mean=0.000005 rms=0.002608 Jy/beam ! Combined flux in latest and established models = 0.160596 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.160596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141994Jy sigma=0.001046 ! Fit after self-cal, rms=0.141376Jy sigma=0.001041 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141376Jy sigma=0.001041 ! Fit after self-cal, rms=0.103513Jy sigma=0.000962 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.922 mas, bmaj=6.241 mas, bpa=0.1522 degrees ! Estimated noise=846.204 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158188 Jy ! Component: 100 - total flux cleaned = 0.00162976 Jy ! Component: 150 - total flux cleaned = 0.00162946 Jy ! Component: 200 - total flux cleaned = 0.00166604 Jy ! Total flux subtracted in 200 components = 0.00166604 Jy ! Clean residual min=-0.004818 max=0.006389 Jy/beam ! Clean residual mean=0.000000 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.162262 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.162262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103439Jy sigma=0.000961 ! Fit after self-cal, rms=0.103386Jy sigma=0.000958 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00575487 Jy ! Component: 100 - total flux cleaned = 0.00803594 Jy ! Component: 150 - total flux cleaned = 0.00804783 Jy ! Component: 200 - total flux cleaned = 0.00770538 Jy ! Total flux subtracted in 200 components = 0.00770538 Jy ! Clean residual min=-0.003518 max=0.003419 Jy/beam ! Clean residual mean=-0.000003 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.169967 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 53 components and 0.169967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102983Jy sigma=0.000955 ! Fit after self-cal, rms=0.102892Jy sigma=0.000955 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102892Jy sigma=0.000955 ! Fit after self-cal, rms=0.103093Jy sigma=0.000954 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=6.216 mas, bpa=0.1805 degrees ! Estimated noise=846.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239075 Jy ! Component: 100 - total flux cleaned = 0.00263158 Jy ! Component: 150 - total flux cleaned = 0.00278207 Jy ! Component: 200 - total flux cleaned = 0.00286791 Jy ! Total flux subtracted in 200 components = 0.00286791 Jy ! Clean residual min=-0.003528 max=0.003428 Jy/beam ! Clean residual mean=-0.000003 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.172835 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 73 components and 0.172835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102958Jy sigma=0.000954 ! Fit after self-cal, rms=0.102937Jy sigma=0.000954 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000414727 Jy ! Component: 100 - total flux cleaned = 0.000266262 Jy ! Component: 150 - total flux cleaned = 0.000165667 Jy ! Component: 200 - total flux cleaned = 0.000102282 Jy ! Total flux subtracted in 200 components = 0.000102282 Jy ! Clean residual min=-0.003502 max=0.003459 Jy/beam ! Clean residual mean=-0.000003 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.172937 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 0.172937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102890Jy sigma=0.000954 ! Fit after self-cal, rms=0.102891Jy sigma=0.000954 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102891Jy sigma=0.000954 ! Fit after self-cal, rms=0.103390Jy sigma=0.000953 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.019 mas, bmaj=12.02 mas, bpa=7.203 degrees ! Estimated noise=1122.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188765 Jy ! Component: 100 - total flux cleaned = 0.002577 Jy ! Component: 150 - total flux cleaned = 0.00268087 Jy ! Component: 200 - total flux cleaned = 0.00258153 Jy ! Total flux subtracted in 200 components = 0.00258153 Jy ! Clean residual min=-0.004750 max=0.004709 Jy/beam ! Clean residual mean=-0.000007 rms=0.001429 Jy/beam ! Combined flux in latest and established models = 0.175519 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 102 components and 0.175519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103319Jy sigma=0.000954 ! Fit after self-cal, rms=0.103301Jy sigma=0.000953 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000313662 Jy ! Component: 100 - total flux cleaned = 0.000227005 Jy ! Component: 150 - total flux cleaned = 0.000120178 Jy ! Component: 200 - total flux cleaned = 2.44311e-05 Jy ! Total flux subtracted in 200 components = 2.44311e-05 Jy ! Clean residual min=-0.004642 max=0.004861 Jy/beam ! Clean residual mean=-0.000007 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.175543 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 111 components and 0.175543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103287Jy sigma=0.000954 ! Fit after self-cal, rms=0.103294Jy sigma=0.000954 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.883 mas, bmaj=6.203 mas, bpa=0.1909 degrees ! Estimated noise=849.883 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.883 x 6.203 at 0.1909 degrees (North through East) ! Clean map min=-0.003488 max=0.1405 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.47 mas, bmaj=5.438 mas, bpa=0.9397 degrees ! Estimated noise=1141.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105055 Jy ! Component: 100 - total flux cleaned = 0.133231 Jy ! Component: 150 - total flux cleaned = 0.146789 Jy ! Component: 200 - total flux cleaned = 0.155142 Jy ! Total flux subtracted in 200 components = 0.155142 Jy ! Clean residual min=-0.005595 max=0.005835 Jy/beam ! Clean residual mean=0.000005 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 0.155142 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.155142 Jy ! Inverting map and beam ! Estimated beam: bmin=2.883 mas, bmaj=6.203 mas, bpa=0.1909 degrees ! Estimated noise=849.883 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00820349 Jy ! Component: 100 - total flux cleaned = 0.0132543 Jy ! Component: 150 - total flux cleaned = 0.0166742 Jy ! Component: 200 - total flux cleaned = 0.0191256 Jy ! Total flux subtracted in 200 components = 0.0191256 Jy ! Clean residual min=-0.003873 max=0.003932 Jy/beam ! Clean residual mean=-0.000002 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.174268 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 42 components and 0.174268 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.019 mas, bmaj=12.02 mas, bpa=7.203 degrees ! Estimated noise=1122.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176145 Jy ! Component: 100 - total flux cleaned = 0.00226889 Jy ! Component: 150 - total flux cleaned = 0.00227862 Jy ! Component: 200 - total flux cleaned = 0.00210768 Jy ! Total flux subtracted in 200 components = 0.00210768 Jy ! Clean residual min=-0.004643 max=0.004913 Jy/beam ! Clean residual mean=-0.000008 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 0.176375 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011271 Jy ! Component: 100 - total flux cleaned = -0.000246064 Jy ! Component: 150 - total flux cleaned = -0.000335077 Jy ! Component: 200 - total flux cleaned = -0.00041618 Jy ! Total flux subtracted in 200 components = -0.00041618 Jy ! Clean residual min=-0.004556 max=0.004901 Jy/beam ! Clean residual mean=-0.000008 rms=0.001413 Jy/beam ! Combined flux in latest and established models = 0.175959 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 86 components and 0.175959 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.883 mas, bmaj=6.203 mas, bpa=0.1909 degrees ! Estimated noise=849.883 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000480511 Jy ! Component: 100 - total flux cleaned = -0.00061494 Jy ! Component: 150 - total flux cleaned = -0.000653354 Jy ! Component: 200 - total flux cleaned = -0.000689548 Jy ! Total flux subtracted in 200 components = -0.000689548 Jy ! Clean residual min=-0.003531 max=0.003860 Jy/beam ! Clean residual mean=-0.000002 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.175269 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 105 components and 0.175269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103308Jy sigma=0.000954 ! Fit after self-cal, rms=0.103316Jy sigma=0.000954 wmodel J1722-0503_S_2014_01_04_pus_map.mod ! Writing 105 model components to file: J1722-0503_S_2014_01_04_pus_map.mod wobs J1722-0503_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1722-0503_S_2014_01_04_pus_uvs.fits wwins J1722-0503_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1722-0503_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.5749e-05 Jy ! Component: 100 - total flux cleaned = -2.19273e-06 Jy ! Component: 150 - total flux cleaned = 0.000157229 Jy ! Component: 200 - total flux cleaned = 0.000106076 Jy ! Component: 250 - total flux cleaned = 0.000106404 Jy ! Component: 300 - total flux cleaned = 0.000150674 Jy ! Component: 350 - total flux cleaned = 6.33616e-05 Jy ! Component: 400 - total flux cleaned = -0.00022684 Jy ! Component: 450 - total flux cleaned = -0.00038647 Jy ! Component: 500 - total flux cleaned = -0.000462844 Jy ! Component: 550 - total flux cleaned = -0.000574917 Jy ! Component: 600 - total flux cleaned = -0.000611321 Jy ! Component: 650 - total flux cleaned = -0.000682379 Jy ! Component: 700 - total flux cleaned = -0.000680874 Jy ! Component: 750 - total flux cleaned = -0.000580145 Jy ! Component: 800 - total flux cleaned = -0.000646227 Jy ! Component: 850 - total flux cleaned = -0.000581129 Jy ! Component: 900 - total flux cleaned = -0.000517572 Jy ! Component: 950 - total flux cleaned = -0.000487425 Jy ! Component: 1000 - total flux cleaned = -0.00051819 Jy ! Component: 1050 - total flux cleaned = -0.000489372 Jy ! Component: 1100 - total flux cleaned = -0.000519303 Jy ! Component: 1150 - total flux cleaned = -0.000575994 Jy ! Component: 1200 - total flux cleaned = -0.00057537 Jy ! Component: 1250 - total flux cleaned = -0.000547862 Jy ! Component: 1300 - total flux cleaned = -0.000521253 Jy ! Component: 1350 - total flux cleaned = -0.000547674 Jy ! Component: 1400 - total flux cleaned = -0.000625105 Jy ! Component: 1450 - total flux cleaned = -0.000625135 Jy ! Component: 1500 - total flux cleaned = -0.00074928 Jy ! Component: 1550 - total flux cleaned = -0.000822191 Jy ! Component: 1600 - total flux cleaned = -0.000870262 Jy ! Component: 1650 - total flux cleaned = -0.000917554 Jy ! Component: 1700 - total flux cleaned = -0.000987987 Jy ! Component: 1750 - total flux cleaned = -0.00107997 Jy ! Component: 1800 - total flux cleaned = -0.00110237 Jy ! Component: 1850 - total flux cleaned = -0.00116924 Jy ! Component: 1900 - total flux cleaned = -0.0011694 Jy ! Component: 1950 - total flux cleaned = -0.00116945 Jy ! Component: 2000 - total flux cleaned = -0.00110545 Jy ! Component: 2050 - total flux cleaned = -0.00108461 Jy ! Component: 2100 - total flux cleaned = -0.00108492 Jy ! Component: 2150 - total flux cleaned = -0.00108502 Jy ! Component: 2200 - total flux cleaned = -0.00110522 Jy ! Component: 2250 - total flux cleaned = -0.0010256 Jy ! Component: 2300 - total flux cleaned = -0.0010256 Jy ! Component: 2350 - total flux cleaned = -0.000947663 Jy ! Component: 2400 - total flux cleaned = -0.00090932 Jy ! Component: 2450 - total flux cleaned = -0.000871071 Jy ! Component: 2500 - total flux cleaned = -0.000814401 Jy ! Component: 2550 - total flux cleaned = -0.000740045 Jy ! Component: 2600 - total flux cleaned = -0.000740195 Jy ! Component: 2650 - total flux cleaned = -0.000739879 Jy ! Component: 2700 - total flux cleaned = -0.000685779 Jy ! Component: 2750 - total flux cleaned = -0.000667906 Jy ! Component: 2800 - total flux cleaned = -0.000667846 Jy ! Component: 2850 - total flux cleaned = -0.000580756 Jy ! Component: 2900 - total flux cleaned = -0.000615622 Jy ! Component: 2950 - total flux cleaned = -0.000650177 Jy ! Component: 3000 - total flux cleaned = -0.000701132 Jy ! Component: 3050 - total flux cleaned = -0.000684327 Jy ! Component: 3100 - total flux cleaned = -0.000767964 Jy ! Component: 3150 - total flux cleaned = -0.000751267 Jy ! Component: 3200 - total flux cleaned = -0.000701915 Jy ! Component: 3250 - total flux cleaned = -0.000767235 Jy ! Component: 3300 - total flux cleaned = -0.000702448 Jy ! Component: 3350 - total flux cleaned = -0.000750572 Jy ! Component: 3400 - total flux cleaned = -0.000750478 Jy ! Component: 3450 - total flux cleaned = -0.000750373 Jy ! Component: 3500 - total flux cleaned = -0.0007503 Jy ! Component: 3550 - total flux cleaned = -0.000781642 Jy ! Component: 3600 - total flux cleaned = -0.000828254 Jy ! Component: 3650 - total flux cleaned = -0.000828206 Jy ! Component: 3700 - total flux cleaned = -0.000812917 Jy ! Component: 3750 - total flux cleaned = -0.000873738 Jy ! Component: 3800 - total flux cleaned = -0.000858659 Jy ! Component: 3850 - total flux cleaned = -0.000843755 Jy ! Component: 3900 - total flux cleaned = -0.000903645 Jy ! Component: 3950 - total flux cleaned = -0.000858881 Jy ! Component: 4000 - total flux cleaned = -0.000858881 Jy ! Component: 4050 - total flux cleaned = -0.000814804 Jy ! Total flux subtracted in 4096 components = -0.000858754 Jy ! Clean residual min=-0.000887 max=0.000987 Jy/beam ! Clean residual mean=-0.000001 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.174411 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 377 components and 0.174411 Jy ![Exited script file: muppet] wmap "J1722-0503_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.883 x 6.203 at 0.1909 degrees (North through East) ! Clean map min=-0.0017989 max=0.14095 Jy/beam ! Writing clean map to FITS file: J1722-0503_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.14095 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000250318 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.532779 0.532779 1.06556 2.13112 4.26223 8.52447 17.0489 34.0979 68.1957 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.14 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.883 x 6.203 at 0.1909 degrees (North through East) ! Clean map min=-0.0017989 max=0.14095 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1722-0503_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:33:13 2017