! Started logfile: J1720-2258_S_2015_01_22_pus_uvs.log on Tue Jan 3 23:00:32 2017 obs J1720-2258_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1720-2258_S_2015_01_22_pus_uva.fits ! AN table 1: 63 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.712522 visibilities/baseline/integration-bin. ! Found source: J1720-2258 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 8080 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1720-2258_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.943688Jy sigma=0.008656 ! Fit after self-cal, rms=0.911944Jy sigma=0.008370 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.383 mas, bmaj=6.429 mas, bpa=-7.327 degrees ! Estimated noise=1796.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0627927 Jy ! Component: 100 - total flux cleaned = 0.0837931 Jy ! Total flux subtracted in 100 components = 0.0837931 Jy ! Clean residual min=-0.006074 max=0.008394 Jy/beam ! Clean residual mean=-0.000015 rms=0.001768 Jy/beam ! Combined flux in latest and established models = 0.0837931 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0837931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095173Jy sigma=0.000802 ! Fit after self-cal, rms=0.095075Jy sigma=0.000801 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=8.37 mas, bpa=-4.112 degrees ! Estimated noise=884.943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150558 Jy ! Component: 100 - total flux cleaned = 0.0217678 Jy ! Component: 150 - total flux cleaned = 0.0253008 Jy ! Component: 200 - total flux cleaned = 0.0273173 Jy ! Total flux subtracted in 200 components = 0.0273173 Jy ! Clean residual min=-0.003830 max=0.003525 Jy/beam ! Clean residual mean=-0.000002 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.11111 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 51 components and 0.11111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092631Jy sigma=0.000782 ! Fit after self-cal, rms=0.092615Jy sigma=0.000782 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.00 KP 1.14 ! LA 1.08 MK 1.10 NL 1.01 OV 0.96 ! PT 1.08 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 1.08 KP 1.00 ! LA 1.03 MK 1.16 NL 1.15 OV 1.00 ! PT 1.04 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 1.07 KP 0.87 ! LA 0.81 MK 1.02 NL 1.09 OV 0.96 ! PT 1.02 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 1.01 KP 0.85 ! LA 0.84 MK 0.88 NL 0.97 OV 0.97 ! PT 1.01 SC 1.00 ! ! ! Fit before self-cal, rms=0.092615Jy sigma=0.000782 ! Fit after self-cal, rms=0.090160Jy sigma=0.000774 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.204 mas, bmaj=8.463 mas, bpa=-4.121 degrees ! Estimated noise=887.241 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000139352 Jy ! Component: 100 - total flux cleaned = -0.000139404 Jy ! Component: 150 - total flux cleaned = -0.000150801 Jy ! Component: 200 - total flux cleaned = -0.000169906 Jy ! Total flux subtracted in 200 components = -0.000169906 Jy ! Clean residual min=-0.002616 max=0.002281 Jy/beam ! Clean residual mean=-0.000001 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.110941 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 57 components and 0.110941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090153Jy sigma=0.000774 ! Fit after self-cal, rms=0.090139Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090139Jy sigma=0.000774 ! Fit after self-cal, rms=0.090162Jy sigma=0.000774 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=8.459 mas, bpa=-4.273 degrees ! Estimated noise=886.472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118142 Jy ! Component: 100 - total flux cleaned = -0.000143842 Jy ! Component: 150 - total flux cleaned = -0.000175077 Jy ! Component: 200 - total flux cleaned = -0.000194108 Jy ! Total flux subtracted in 200 components = -0.000194108 Jy ! Clean residual min=-0.002573 max=0.002280 Jy/beam ! Clean residual mean=-0.000001 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.110746 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 60 components and 0.110746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090156Jy sigma=0.000773 ! Fit after self-cal, rms=0.090159Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.37634e-05 Jy ! Component: 100 - total flux cleaned = -4.37084e-05 Jy ! Component: 150 - total flux cleaned = -6.15876e-05 Jy ! Component: 200 - total flux cleaned = -7.87101e-05 Jy ! Total flux subtracted in 200 components = -7.87101e-05 Jy ! Clean residual min=-0.002550 max=0.002289 Jy/beam ! Clean residual mean=-0.000001 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.110668 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 62 components and 0.110668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090156Jy sigma=0.000773 ! Fit after self-cal, rms=0.090156Jy sigma=0.000773 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090156Jy sigma=0.000773 ! Fit after self-cal, rms=0.090125Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=8.451 mas, bpa=-4.422 degrees ! Estimated noise=885.621 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109131 Jy ! Component: 100 - total flux cleaned = -0.000119768 Jy ! Component: 150 - total flux cleaned = -0.00014715 Jy ! Component: 200 - total flux cleaned = -0.000164062 Jy ! Total flux subtracted in 200 components = -0.000164062 Jy ! Clean residual min=-0.002536 max=0.002295 Jy/beam ! Clean residual mean=-0.000001 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.110504 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 65 components and 0.110504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090122Jy sigma=0.000773 ! Fit after self-cal, rms=0.090123Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.43132e-05 Jy ! Component: 100 - total flux cleaned = -4.19936e-05 Jy ! Component: 150 - total flux cleaned = -5.8121e-05 Jy ! Component: 200 - total flux cleaned = -6.58698e-05 Jy ! Total flux subtracted in 200 components = -6.58698e-05 Jy ! Clean residual min=-0.002519 max=0.002307 Jy/beam ! Clean residual mean=-0.000001 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.110438 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 65 components and 0.110438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090121Jy sigma=0.000773 ! Fit after self-cal, rms=0.090121Jy sigma=0.000773 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090121Jy sigma=0.000773 ! Fit after self-cal, rms=0.090110Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.355 mas, bmaj=17.37 mas, bpa=-4.564 degrees ! Estimated noise=1111.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000180406 Jy ! Component: 100 - total flux cleaned = -0.000180256 Jy ! Component: 150 - total flux cleaned = -0.000188356 Jy ! Component: 200 - total flux cleaned = -0.000200801 Jy ! Total flux subtracted in 200 components = -0.000200801 Jy ! Clean residual min=-0.002424 max=0.002136 Jy/beam ! Clean residual mean=-0.000001 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.110237 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 69 components and 0.110237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090112Jy sigma=0.000773 ! Fit after self-cal, rms=0.090116Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.3563e-05 Jy ! Component: 100 - total flux cleaned = -6.364e-05 Jy ! Component: 150 - total flux cleaned = -7.10134e-05 Jy ! Component: 200 - total flux cleaned = -7.07433e-05 Jy ! Total flux subtracted in 200 components = -7.07433e-05 Jy ! Clean residual min=-0.002422 max=0.002131 Jy/beam ! Clean residual mean=-0.000001 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.110166 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 71 components and 0.110166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090119Jy sigma=0.000773 ! Fit after self-cal, rms=0.090121Jy sigma=0.000773 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.199 mas, bmaj=8.445 mas, bpa=-4.553 degrees ! Estimated noise=885.029 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.199 x 8.445 at -4.553 degrees (North through East) ! Clean map min=-0.0024013 max=0.088209 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.395 mas, bmaj=6.438 mas, bpa=-8.054 degrees ! Estimated noise=1797.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0629182 Jy ! Component: 100 - total flux cleaned = 0.0848426 Jy ! Component: 150 - total flux cleaned = 0.0941004 Jy ! Component: 200 - total flux cleaned = 0.0992393 Jy ! Total flux subtracted in 200 components = 0.0992393 Jy ! Clean residual min=-0.005164 max=0.005296 Jy/beam ! Clean residual mean=-0.000009 rms=0.001382 Jy/beam ! Combined flux in latest and established models = 0.0992393 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0992393 Jy ! Inverting map and beam ! Estimated beam: bmin=3.199 mas, bmaj=8.445 mas, bpa=-4.553 degrees ! Estimated noise=885.029 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00602987 Jy ! Component: 100 - total flux cleaned = 0.00849855 Jy ! Component: 150 - total flux cleaned = 0.00969043 Jy ! Component: 200 - total flux cleaned = 0.0101028 Jy ! Total flux subtracted in 200 components = 0.0101028 Jy ! Clean residual min=-0.002654 max=0.002357 Jy/beam ! Clean residual mean=-0.000001 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.109342 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 40 components and 0.109342 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.355 mas, bmaj=17.37 mas, bpa=-4.564 degrees ! Estimated noise=1111.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000756248 Jy ! Component: 100 - total flux cleaned = 0.000788242 Jy ! Component: 150 - total flux cleaned = 0.000812283 Jy ! Component: 200 - total flux cleaned = 0.0008304 Jy ! Total flux subtracted in 200 components = 0.0008304 Jy ! Clean residual min=-0.002382 max=0.002149 Jy/beam ! Clean residual mean=-0.000001 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.110172 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.36028e-05 Jy ! Component: 100 - total flux cleaned = 1.90701e-05 Jy ! Component: 150 - total flux cleaned = 1.83762e-05 Jy ! Component: 200 - total flux cleaned = 1.86683e-05 Jy ! Total flux subtracted in 200 components = 1.86683e-05 Jy ! Clean residual min=-0.002382 max=0.002125 Jy/beam ! Clean residual mean=-0.000001 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.110191 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 44 components and 0.110191 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.199 mas, bmaj=8.445 mas, bpa=-4.553 degrees ! Estimated noise=885.029 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000158345 Jy ! Component: 100 - total flux cleaned = -0.000140873 Jy ! Component: 150 - total flux cleaned = -0.000140852 Jy ! Component: 200 - total flux cleaned = -0.000156762 Jy ! Total flux subtracted in 200 components = -0.000156762 Jy ! Clean residual min=-0.002554 max=0.002394 Jy/beam ! Clean residual mean=-0.000001 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.110034 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.110034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090136Jy sigma=0.000774 ! Fit after self-cal, rms=0.090136Jy sigma=0.000774 wmodel J1720-2258_S_2015_01_22_pus_map.mod ! Writing 48 model components to file: J1720-2258_S_2015_01_22_pus_map.mod wobs J1720-2258_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1720-2258_S_2015_01_22_pus_uvs.fits wwins J1720-2258_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1720-2258_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000605185 Jy ! Component: 100 - total flux cleaned = -0.00112262 Jy ! Component: 150 - total flux cleaned = -0.00137841 Jy ! Component: 200 - total flux cleaned = -0.001447 Jy ! Component: 250 - total flux cleaned = -0.00160785 Jy ! Component: 300 - total flux cleaned = -0.00169961 Jy ! Component: 350 - total flux cleaned = -0.00175833 Jy ! Component: 400 - total flux cleaned = -0.00175775 Jy ! Component: 450 - total flux cleaned = -0.00173071 Jy ! Component: 500 - total flux cleaned = -0.00173045 Jy ! Component: 550 - total flux cleaned = -0.00167857 Jy ! Component: 600 - total flux cleaned = -0.00165279 Jy ! Component: 650 - total flux cleaned = -0.00150586 Jy ! Component: 700 - total flux cleaned = -0.00145849 Jy ! Component: 750 - total flux cleaned = -0.00145794 Jy ! Component: 800 - total flux cleaned = -0.00134223 Jy ! Component: 850 - total flux cleaned = -0.00125222 Jy ! Component: 900 - total flux cleaned = -0.00118567 Jy ! Component: 950 - total flux cleaned = -0.00107688 Jy ! Component: 1000 - total flux cleaned = -0.000991588 Jy ! Component: 1050 - total flux cleaned = -0.000886777 Jy ! Component: 1100 - total flux cleaned = -0.000783745 Jy ! Component: 1150 - total flux cleaned = -0.000702914 Jy ! Component: 1200 - total flux cleaned = -0.000603247 Jy ! Component: 1250 - total flux cleaned = -0.000505183 Jy ! Component: 1300 - total flux cleaned = -0.000427771 Jy ! Component: 1350 - total flux cleaned = -0.00031323 Jy ! Component: 1400 - total flux cleaned = -0.000200453 Jy ! Component: 1450 - total flux cleaned = -7.07775e-05 Jy ! Component: 1500 - total flux cleaned = 2.0281e-05 Jy ! Component: 1550 - total flux cleaned = 7.4331e-05 Jy ! Component: 1600 - total flux cleaned = 0.000163089 Jy ! Component: 1650 - total flux cleaned = 0.000215558 Jy ! Component: 1700 - total flux cleaned = 0.000318848 Jy ! Component: 1750 - total flux cleaned = 0.000301776 Jy ! Component: 1800 - total flux cleaned = 0.000369277 Jy ! Component: 1850 - total flux cleaned = 0.00045225 Jy ! Component: 1900 - total flux cleaned = 0.000435967 Jy ! Component: 1950 - total flux cleaned = 0.000484917 Jy ! Component: 2000 - total flux cleaned = 0.000597322 Jy ! Component: 2050 - total flux cleaned = 0.000724236 Jy ! Component: 2100 - total flux cleaned = 0.000755615 Jy ! Component: 2150 - total flux cleaned = 0.000833505 Jy ! Component: 2200 - total flux cleaned = 0.000941131 Jy ! Component: 2250 - total flux cleaned = 0.000956457 Jy ! Component: 2300 - total flux cleaned = 0.00104696 Jy ! Component: 2350 - total flux cleaned = 0.00109179 Jy ! Component: 2400 - total flux cleaned = 0.00120989 Jy ! Component: 2450 - total flux cleaned = 0.00121002 Jy ! Component: 2500 - total flux cleaned = 0.00128258 Jy ! Component: 2550 - total flux cleaned = 0.0013256 Jy ! Component: 2600 - total flux cleaned = 0.00138242 Jy ! Component: 2650 - total flux cleaned = 0.00143882 Jy ! Component: 2700 - total flux cleaned = 0.00146685 Jy ! Component: 2750 - total flux cleaned = 0.00153614 Jy ! Component: 2800 - total flux cleaned = 0.00156363 Jy ! Component: 2850 - total flux cleaned = 0.0016319 Jy ! Component: 2900 - total flux cleaned = 0.00167261 Jy ! Component: 2950 - total flux cleaned = 0.00174003 Jy ! Component: 3000 - total flux cleaned = 0.00179363 Jy ! Component: 3050 - total flux cleaned = 0.00187356 Jy ! Component: 3100 - total flux cleaned = 0.00193984 Jy ! Component: 3150 - total flux cleaned = 0.00201899 Jy ! Component: 3200 - total flux cleaned = 0.00209771 Jy ! Component: 3250 - total flux cleaned = 0.00218904 Jy ! Component: 3300 - total flux cleaned = 0.00225399 Jy ! Component: 3350 - total flux cleaned = 0.00234447 Jy ! Component: 3400 - total flux cleaned = 0.00240877 Jy ! Component: 3450 - total flux cleaned = 0.00248566 Jy ! Component: 3500 - total flux cleaned = 0.00256222 Jy ! Component: 3550 - total flux cleaned = 0.0026004 Jy ! Component: 3600 - total flux cleaned = 0.00270167 Jy ! Component: 3650 - total flux cleaned = 0.00275215 Jy ! Component: 3700 - total flux cleaned = 0.00277736 Jy ! Component: 3750 - total flux cleaned = 0.00282764 Jy ! Component: 3800 - total flux cleaned = 0.00282762 Jy ! Component: 3850 - total flux cleaned = 0.00285266 Jy ! Component: 3900 - total flux cleaned = 0.00286516 Jy ! Component: 3950 - total flux cleaned = 0.00291502 Jy ! Component: 4000 - total flux cleaned = 0.00293988 Jy ! Component: 4050 - total flux cleaned = 0.00296469 Jy ! Total flux subtracted in 4096 components = 0.00301427 Jy ! Clean residual min=-0.000742 max=0.000708 Jy/beam ! Clean residual mean=0.000000 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.113049 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 290 components and 0.113049 Jy ![Exited script file: muppet] wmap "J1720-2258_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.199 x 8.445 at -4.553 degrees (North through East) ! Clean map min=-0.0015696 max=0.087992 Jy/beam ! Writing clean map to FITS file: J1720-2258_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0879917 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000219694 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.749027 0.749027 1.49805 2.99611 5.99222 11.9844 23.9689 47.9377 95.8755 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.087 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.199 x 8.445 at -4.553 degrees (North through East) ! Clean map min=-0.0015696 max=0.087992 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1720-2258_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 23:00:37 2017