! Started logfile: J1719+4804_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:31:00 2017 obs J1719+4804_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1719+4804_S_2015_01_23_pus_uva.fits ! AN table 1: 103 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.780367 visibilities/baseline/integration-bin. ! Found source: J1719+4804 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 14468 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1719+4804_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.931064Jy sigma=0.011675 ! Fit after self-cal, rms=0.923767Jy sigma=0.011593 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.997 mas, bmaj=4.373 mas, bpa=-5.038 degrees ! Estimated noise=808.899 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0598207 Jy ! Component: 100 - total flux cleaned = 0.0728781 Jy ! Total flux subtracted in 100 components = 0.0728781 Jy ! Clean residual min=-0.003254 max=0.003702 Jy/beam ! Clean residual mean=-0.000003 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.0728781 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0728781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069051Jy sigma=0.000799 ! Fit after self-cal, rms=0.069044Jy sigma=0.000799 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.591 mas, bmaj=5.019 mas, bpa=-2.675 degrees ! Estimated noise=480.416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423299 Jy ! Component: 100 - total flux cleaned = 0.00633063 Jy ! Component: 150 - total flux cleaned = 0.00760303 Jy ! Component: 200 - total flux cleaned = 0.00841135 Jy ! Total flux subtracted in 200 components = 0.00841135 Jy ! Clean residual min=-0.003030 max=0.003988 Jy/beam ! Clean residual mean=-0.000009 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.0812895 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 33 components and 0.0812895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068685Jy sigma=0.000798 ! Fit after self-cal, rms=0.068692Jy sigma=0.000798 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 0.92 KP 1.08 ! LA 0.99 MK 1.03 NL 1.03 OV 0.97 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.00 KP 1.01 ! LA 0.98 MK 1.01 NL 1.21 OV 0.98 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 1.01 KP 0.86 ! LA 0.77 MK 1.01 NL 1.70 OV 0.95 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 1.02 KP 0.80 ! LA 0.81 MK 1.03 NL 1.04 OV 0.98 ! PT 1.04 SC 1.02 ! ! ! Fit before self-cal, rms=0.068692Jy sigma=0.000798 ! Fit after self-cal, rms=0.067052Jy sigma=0.000781 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=5.05 mas, bpa=-2.187 degrees ! Estimated noise=481.923 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147832 Jy ! Component: 100 - total flux cleaned = 0.000176063 Jy ! Component: 150 - total flux cleaned = 0.000188677 Jy ! Component: 200 - total flux cleaned = 0.000211886 Jy ! Total flux subtracted in 200 components = 0.000211886 Jy ! Clean residual min=-0.002133 max=0.001975 Jy/beam ! Clean residual mean=-0.000007 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0815014 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.0815014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067045Jy sigma=0.000781 ! Fit after self-cal, rms=0.067064Jy sigma=0.000780 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067064Jy sigma=0.000780 ! Fit after self-cal, rms=0.066400Jy sigma=0.000775 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.62 mas, bmaj=5.048 mas, bpa=-3.051 degrees ! Estimated noise=481.068 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.76114e-05 Jy ! Component: 100 - total flux cleaned = -8.99534e-06 Jy ! Component: 150 - total flux cleaned = -1.7008e-05 Jy ! Component: 200 - total flux cleaned = -2.36473e-05 Jy ! Total flux subtracted in 200 components = -2.36473e-05 Jy ! Clean residual min=-0.001158 max=0.001228 Jy/beam ! Clean residual mean=-0.000002 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.0814777 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.0814777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066397Jy sigma=0.000775 ! Fit after self-cal, rms=0.066428Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.404e-06 Jy ! Component: 100 - total flux cleaned = -1.00432e-06 Jy ! Component: 150 - total flux cleaned = -1.06031e-05 Jy ! Component: 200 - total flux cleaned = -1.0733e-05 Jy ! Total flux subtracted in 200 components = -1.0733e-05 Jy ! Clean residual min=-0.001174 max=0.001221 Jy/beam ! Clean residual mean=-0.000002 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.081467 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.081467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066427Jy sigma=0.000775 ! Fit after self-cal, rms=0.066427Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066427Jy sigma=0.000775 ! Fit after self-cal, rms=0.066544Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=5.052 mas, bpa=-2.951 degrees ! Estimated noise=481.244 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.04407e-05 Jy ! Component: 100 - total flux cleaned = -9.62657e-05 Jy ! Component: 150 - total flux cleaned = -0.000106548 Jy ! Component: 200 - total flux cleaned = -0.000115483 Jy ! Total flux subtracted in 200 components = -0.000115483 Jy ! Clean residual min=-0.001165 max=0.001225 Jy/beam ! Clean residual mean=-0.000002 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.0813515 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.0813515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066543Jy sigma=0.000775 ! Fit after self-cal, rms=0.066546Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.5542e-06 Jy ! Component: 100 - total flux cleaned = -4.68641e-06 Jy ! Component: 150 - total flux cleaned = -4.78431e-06 Jy ! Component: 200 - total flux cleaned = -1.4718e-06 Jy ! Total flux subtracted in 200 components = -1.4718e-06 Jy ! Clean residual min=-0.001167 max=0.001224 Jy/beam ! Clean residual mean=-0.000002 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.08135 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.08135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066545Jy sigma=0.000775 ! Fit after self-cal, rms=0.066545Jy sigma=0.000775 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066545Jy sigma=0.000775 ! Fit after self-cal, rms=0.066589Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.464 mas, bmaj=8.748 mas, bpa=12.01 degrees ! Estimated noise=593.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.47579e-05 Jy ! Component: 100 - total flux cleaned = 2.87427e-05 Jy ! Component: 150 - total flux cleaned = 2.00473e-05 Jy ! Component: 200 - total flux cleaned = 1.63967e-05 Jy ! Total flux subtracted in 200 components = 1.63967e-05 Jy ! Clean residual min=-0.001445 max=0.001575 Jy/beam ! Clean residual mean=-0.000006 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0813664 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 0.0813664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066590Jy sigma=0.000775 ! Fit after self-cal, rms=0.066591Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.13113e-05 Jy ! Component: 100 - total flux cleaned = 2.79037e-05 Jy ! Component: 150 - total flux cleaned = 2.51223e-05 Jy ! Component: 200 - total flux cleaned = 2.50063e-05 Jy ! Total flux subtracted in 200 components = 2.50063e-05 Jy ! Clean residual min=-0.001444 max=0.001571 Jy/beam ! Clean residual mean=-0.000006 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0813914 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 65 components and 0.0813914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066592Jy sigma=0.000775 ! Fit after self-cal, rms=0.066592Jy sigma=0.000775 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.632 mas, bmaj=5.054 mas, bpa=-2.866 degrees ! Estimated noise=481.322 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.632 x 5.054 at -2.866 degrees (North through East) ! Clean map min=-0.0011269 max=0.076272 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=4.404 mas, bpa=-5.941 degrees ! Estimated noise=810.552 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0599137 Jy ! Component: 100 - total flux cleaned = 0.0730297 Jy ! Component: 150 - total flux cleaned = 0.0765757 Jy ! Component: 200 - total flux cleaned = 0.0784414 Jy ! Total flux subtracted in 200 components = 0.0784414 Jy ! Clean residual min=-0.002303 max=0.002166 Jy/beam ! Clean residual mean=-0.000001 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.0784414 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0784414 Jy ! Inverting map and beam ! Estimated beam: bmin=3.632 mas, bmaj=5.054 mas, bpa=-2.866 degrees ! Estimated noise=481.322 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130155 Jy ! Component: 100 - total flux cleaned = 0.00196114 Jy ! Component: 150 - total flux cleaned = 0.00225382 Jy ! Component: 200 - total flux cleaned = 0.00232991 Jy ! Total flux subtracted in 200 components = 0.00232991 Jy ! Clean residual min=-0.001170 max=0.001209 Jy/beam ! Clean residual mean=-0.000002 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.0807714 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.0807714 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.464 mas, bmaj=8.748 mas, bpa=12.01 degrees ! Estimated noise=593.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000318591 Jy ! Component: 100 - total flux cleaned = 0.000383969 Jy ! Component: 150 - total flux cleaned = 0.000398803 Jy ! Component: 200 - total flux cleaned = 0.000417169 Jy ! Total flux subtracted in 200 components = 0.000417169 Jy ! Clean residual min=-0.001464 max=0.001560 Jy/beam ! Clean residual mean=-0.000006 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0811885 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.55308e-06 Jy ! Component: 100 - total flux cleaned = 2.08902e-05 Jy ! Component: 150 - total flux cleaned = 3.26488e-05 Jy ! Component: 200 - total flux cleaned = 4.38988e-05 Jy ! Total flux subtracted in 200 components = 4.38988e-05 Jy ! Clean residual min=-0.001459 max=0.001561 Jy/beam ! Clean residual mean=-0.000006 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0812324 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.0812324 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.632 mas, bmaj=5.054 mas, bpa=-2.866 degrees ! Estimated noise=481.322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.66308e-05 Jy ! Component: 100 - total flux cleaned = -7.89164e-05 Jy ! Component: 150 - total flux cleaned = -6.57194e-05 Jy ! Component: 200 - total flux cleaned = -5.95831e-05 Jy ! Total flux subtracted in 200 components = -5.95831e-05 Jy ! Clean residual min=-0.001165 max=0.001196 Jy/beam ! Clean residual mean=-0.000002 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.0811729 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.0811728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066595Jy sigma=0.000775 ! Fit after self-cal, rms=0.066592Jy sigma=0.000775 wmodel J1719+4804_S_2015_01_23_pus_map.mod ! Writing 38 model components to file: J1719+4804_S_2015_01_23_pus_map.mod wobs J1719+4804_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1719+4804_S_2015_01_23_pus_uvs.fits wwins J1719+4804_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J1719+4804_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204922 Jy ! Component: 100 - total flux cleaned = 0.000248314 Jy ! Component: 150 - total flux cleaned = 0.000329461 Jy ! Component: 200 - total flux cleaned = 0.000368615 Jy ! Component: 250 - total flux cleaned = 0.000445092 Jy ! Component: 300 - total flux cleaned = 0.000444606 Jy ! Component: 350 - total flux cleaned = 0.000426291 Jy ! Component: 400 - total flux cleaned = 0.000443837 Jy ! Component: 450 - total flux cleaned = 0.000392359 Jy ! Component: 500 - total flux cleaned = 0.000375833 Jy ! Component: 550 - total flux cleaned = 0.000425521 Jy ! Component: 600 - total flux cleaned = 0.000441938 Jy ! Component: 650 - total flux cleaned = 0.000457519 Jy ! Component: 700 - total flux cleaned = 0.000441658 Jy ! Component: 750 - total flux cleaned = 0.000410905 Jy ! Component: 800 - total flux cleaned = 0.000425892 Jy ! Component: 850 - total flux cleaned = 0.000396074 Jy ! Component: 900 - total flux cleaned = 0.000367042 Jy ! Component: 950 - total flux cleaned = 0.000352873 Jy ! Component: 1000 - total flux cleaned = 0.000324468 Jy ! Component: 1050 - total flux cleaned = 0.000254861 Jy ! Component: 1100 - total flux cleaned = 0.00024133 Jy ! Component: 1150 - total flux cleaned = 0.000187093 Jy ! Component: 1200 - total flux cleaned = 0.000173787 Jy ! Component: 1250 - total flux cleaned = 0.000120916 Jy ! Component: 1300 - total flux cleaned = 9.46571e-05 Jy ! Component: 1350 - total flux cleaned = 5.59245e-05 Jy ! Component: 1400 - total flux cleaned = 3.03525e-05 Jy ! Component: 1450 - total flux cleaned = -1.99911e-05 Jy ! Component: 1500 - total flux cleaned = -3.25588e-05 Jy ! Component: 1550 - total flux cleaned = -4.4941e-05 Jy ! Component: 1600 - total flux cleaned = -9.36587e-05 Jy ! Component: 1650 - total flux cleaned = -0.000165599 Jy ! Component: 1700 - total flux cleaned = -0.00017737 Jy ! Component: 1750 - total flux cleaned = -0.000142005 Jy ! Component: 1800 - total flux cleaned = -0.000153637 Jy ! Component: 1850 - total flux cleaned = -0.000142136 Jy ! Component: 1900 - total flux cleaned = -0.000164969 Jy ! Component: 1950 - total flux cleaned = -0.000119866 Jy ! Component: 2000 - total flux cleaned = -0.000142427 Jy ! Component: 2050 - total flux cleaned = -0.000164433 Jy ! Component: 2100 - total flux cleaned = -0.000153303 Jy ! Component: 2150 - total flux cleaned = -0.000142362 Jy ! Component: 2200 - total flux cleaned = -0.000110164 Jy ! Component: 2250 - total flux cleaned = -9.96538e-05 Jy ! Component: 2300 - total flux cleaned = -0.000131342 Jy ! Component: 2350 - total flux cleaned = -0.000110474 Jy ! Component: 2400 - total flux cleaned = -8.99393e-05 Jy ! Component: 2450 - total flux cleaned = -8.99077e-05 Jy ! Component: 2500 - total flux cleaned = -7.97261e-05 Jy ! Component: 2550 - total flux cleaned = -6.95511e-05 Jy ! Component: 2600 - total flux cleaned = -7.96569e-05 Jy ! Component: 2650 - total flux cleaned = -5.97208e-05 Jy ! Component: 2700 - total flux cleaned = -8.93328e-05 Jy ! Component: 2750 - total flux cleaned = -6.97885e-05 Jy ! Component: 2800 - total flux cleaned = -6.98612e-05 Jy ! Component: 2850 - total flux cleaned = -6.98948e-05 Jy ! Component: 2900 - total flux cleaned = -9.85454e-05 Jy ! Component: 2950 - total flux cleaned = -7.9627e-05 Jy ! Component: 3000 - total flux cleaned = -0.000126689 Jy ! Component: 3050 - total flux cleaned = -9.86445e-05 Jy ! Component: 3100 - total flux cleaned = -0.000107863 Jy ! Component: 3150 - total flux cleaned = -0.000117086 Jy ! Component: 3200 - total flux cleaned = -0.000135288 Jy ! Component: 3250 - total flux cleaned = -9.8924e-05 Jy ! Component: 3300 - total flux cleaned = -0.000135074 Jy ! Component: 3350 - total flux cleaned = -0.000152959 Jy ! Component: 3400 - total flux cleaned = -9.96361e-05 Jy ! Component: 3450 - total flux cleaned = -0.000108398 Jy ! Component: 3500 - total flux cleaned = -0.000117159 Jy ! Component: 3550 - total flux cleaned = -0.000108383 Jy ! Component: 3600 - total flux cleaned = -0.000134283 Jy ! Component: 3650 - total flux cleaned = -0.000125633 Jy ! Component: 3700 - total flux cleaned = -0.00015132 Jy ! Component: 3750 - total flux cleaned = -0.000134284 Jy ! Component: 3800 - total flux cleaned = -0.000117363 Jy ! Component: 3850 - total flux cleaned = -0.000100605 Jy ! Component: 3900 - total flux cleaned = -9.22588e-05 Jy ! Component: 3950 - total flux cleaned = -6.7388e-05 Jy ! Component: 4000 - total flux cleaned = -5.09222e-05 Jy ! Component: 4050 - total flux cleaned = -1.82108e-05 Jy ! Total flux subtracted in 4096 components = -3.44512e-05 Jy ! Clean residual min=-0.000545 max=0.000489 Jy/beam ! Clean residual mean=0.000001 rms=0.000145 Jy/beam ! Combined flux in latest and established models = 0.0811384 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 323 components and 0.0811383 Jy ![Exited script file: muppet] wmap "J1719+4804_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.632 x 5.054 at -2.866 degrees (North through East) ! Clean map min=-0.0010674 max=0.076328 Jy/beam ! Writing clean map to FITS file: J1719+4804_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0763284 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000144385 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.567488 0.567488 1.13498 2.26995 4.53991 9.07981 18.1596 36.3192 72.6385 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.632 x 5.054 at -2.866 degrees (North through East) ! Clean map min=-0.0010674 max=0.076328 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1719+4804_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:31:05 2017