! Started logfile: J1716-0452_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:33:04 2017 obs J1716-0452_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1716-0452_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J1716-0452 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1716-0452_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.829420Jy sigma=0.010723 ! Fit after self-cal, rms=0.806106Jy sigma=0.010429 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.52 mas, bmaj=5.647 mas, bpa=0.5041 degrees ! Estimated noise=1118.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.148479 Jy ! Component: 100 - total flux cleaned = 0.191023 Jy ! Total flux subtracted in 100 components = 0.191023 Jy ! Clean residual min=-0.012278 max=0.019500 Jy/beam ! Clean residual mean=0.000019 rms=0.003568 Jy/beam ! Combined flux in latest and established models = 0.191023 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.191023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095599Jy sigma=0.001057 ! Fit after self-cal, rms=0.095428Jy sigma=0.001055 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=6.263 mas, bpa=-0.4725 degrees ! Estimated noise=886.266 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0252882 Jy ! Component: 100 - total flux cleaned = 0.038034 Jy ! Component: 150 - total flux cleaned = 0.0455974 Jy ! Component: 200 - total flux cleaned = 0.0504629 Jy ! Total flux subtracted in 200 components = 0.0504629 Jy ! Clean residual min=-0.007210 max=0.010956 Jy/beam ! Clean residual mean=0.000018 rms=0.002297 Jy/beam ! Combined flux in latest and established models = 0.241486 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 36 components and 0.241486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087921Jy sigma=0.000979 ! Fit after self-cal, rms=0.087733Jy sigma=0.000978 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 0.94 ! MK 1.00 NL 0.93 OV 0.93 PT 0.98 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.00* KP 1.00* LA 0.97 ! MK 1.01 NL 0.96 OV 0.98 PT 0.98 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* KP 1.00* LA 0.85 ! MK 1.02 NL 0.94 OV 0.94 PT 0.97 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 0.91 ! MK 1.00 NL 1.05 OV 0.98 PT 0.99 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.087733Jy sigma=0.000978 ! Fit after self-cal, rms=0.082301Jy sigma=0.000937 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=6.364 mas, bpa=-0.5671 degrees ! Estimated noise=882.203 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0042552 Jy ! Component: 100 - total flux cleaned = 0.00578144 Jy ! Component: 150 - total flux cleaned = 0.00670192 Jy ! Component: 200 - total flux cleaned = 0.00723033 Jy ! Total flux subtracted in 200 components = 0.00723033 Jy ! Clean residual min=-0.003585 max=0.003764 Jy/beam ! Clean residual mean=0.000002 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.248716 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 51 components and 0.248716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081943Jy sigma=0.000931 ! Fit after self-cal, rms=0.081567Jy sigma=0.000931 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081567Jy sigma=0.000931 ! Fit after self-cal, rms=0.080795Jy sigma=0.000924 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=6.356 mas, bpa=-0.4288 degrees ! Estimated noise=880.751 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000952471 Jy ! Component: 100 - total flux cleaned = 0.00115829 Jy ! Component: 150 - total flux cleaned = 0.00120237 Jy ! Component: 200 - total flux cleaned = 0.00124047 Jy ! Total flux subtracted in 200 components = 0.00124047 Jy ! Clean residual min=-0.002416 max=0.002160 Jy/beam ! Clean residual mean=-0.000000 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.249957 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 0.249957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080742Jy sigma=0.000923 ! Fit after self-cal, rms=0.080762Jy sigma=0.000923 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.16116e-05 Jy ! Component: 100 - total flux cleaned = 0.000114909 Jy ! Component: 150 - total flux cleaned = 0.0001463 Jy ! Component: 200 - total flux cleaned = 0.000175055 Jy ! Total flux subtracted in 200 components = 0.000175055 Jy ! Clean residual min=-0.002244 max=0.002097 Jy/beam ! Clean residual mean=-0.000000 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.250132 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 76 components and 0.250132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080736Jy sigma=0.000923 ! Fit after self-cal, rms=0.080743Jy sigma=0.000922 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080743Jy sigma=0.000922 ! Fit after self-cal, rms=0.080824Jy sigma=0.000922 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.997 mas, bmaj=6.356 mas, bpa=-0.4259 degrees ! Estimated noise=881.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.37267e-05 Jy ! Component: 100 - total flux cleaned = -9.50381e-05 Jy ! Component: 150 - total flux cleaned = -9.51949e-05 Jy ! Component: 200 - total flux cleaned = -4.9375e-05 Jy ! Total flux subtracted in 200 components = -4.9375e-05 Jy ! Clean residual min=-0.002213 max=0.002079 Jy/beam ! Clean residual mean=-0.000000 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.250082 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 81 components and 0.250082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080807Jy sigma=0.000922 ! Fit after self-cal, rms=0.080807Jy sigma=0.000922 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000119551 Jy ! Component: 100 - total flux cleaned = -7.80242e-05 Jy ! Component: 150 - total flux cleaned = -3.97857e-05 Jy ! Component: 200 - total flux cleaned = -2.25292e-05 Jy ! Total flux subtracted in 200 components = -2.25292e-05 Jy ! Clean residual min=-0.002181 max=0.002110 Jy/beam ! Clean residual mean=-0.000000 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.25006 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 0.25006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080797Jy sigma=0.000922 ! Fit after self-cal, rms=0.080800Jy sigma=0.000922 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080800Jy sigma=0.000922 ! Fit after self-cal, rms=0.080840Jy sigma=0.000922 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.185 mas, bmaj=12.19 mas, bpa=6.417 degrees ! Estimated noise=1093.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219964 Jy ! Component: 100 - total flux cleaned = 0.000132197 Jy ! Component: 150 - total flux cleaned = 9.88707e-05 Jy ! Component: 200 - total flux cleaned = 0.00010781 Jy ! Total flux subtracted in 200 components = 0.00010781 Jy ! Clean residual min=-0.001824 max=0.002195 Jy/beam ! Clean residual mean=-0.000001 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.250168 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 102 components and 0.250168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080840Jy sigma=0.000922 ! Fit after self-cal, rms=0.080833Jy sigma=0.000922 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.58978e-05 Jy ! Component: 100 - total flux cleaned = 5.75485e-06 Jy ! Component: 150 - total flux cleaned = -3.27169e-05 Jy ! Component: 200 - total flux cleaned = -4.01252e-05 Jy ! Total flux subtracted in 200 components = -4.01252e-05 Jy ! Clean residual min=-0.001773 max=0.002171 Jy/beam ! Clean residual mean=-0.000001 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.250127 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 107 components and 0.250127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080834Jy sigma=0.000922 ! Fit after self-cal, rms=0.080834Jy sigma=0.000922 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.998 mas, bmaj=6.357 mas, bpa=-0.4337 degrees ! Estimated noise=882.394 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.998 x 6.357 at -0.4337 degrees (North through East) ! Clean map min=-0.0030916 max=0.1937 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.528 mas, bmaj=5.719 mas, bpa=0.5755 degrees ! Estimated noise=1110.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.147554 Jy ! Component: 100 - total flux cleaned = 0.188864 Jy ! Component: 150 - total flux cleaned = 0.210032 Jy ! Component: 200 - total flux cleaned = 0.222068 Jy ! Total flux subtracted in 200 components = 0.222068 Jy ! Clean residual min=-0.005991 max=0.006143 Jy/beam ! Clean residual mean=0.000005 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 0.222068 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.222068 Jy ! Inverting map and beam ! Estimated beam: bmin=2.998 mas, bmaj=6.357 mas, bpa=-0.4337 degrees ! Estimated noise=882.394 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00828747 Jy ! Component: 100 - total flux cleaned = 0.0133673 Jy ! Component: 150 - total flux cleaned = 0.0166891 Jy ! Component: 200 - total flux cleaned = 0.0187776 Jy ! Total flux subtracted in 200 components = 0.0187776 Jy ! Clean residual min=-0.002844 max=0.002600 Jy/beam ! Clean residual mean=0.000004 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.240846 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 69 components and 0.240846 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.185 mas, bmaj=12.19 mas, bpa=6.417 degrees ! Estimated noise=1093.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379043 Jy ! Component: 100 - total flux cleaned = 0.00511053 Jy ! Component: 150 - total flux cleaned = 0.00597978 Jy ! Component: 200 - total flux cleaned = 0.0066727 Jy ! Total flux subtracted in 200 components = 0.0066727 Jy ! Clean residual min=-0.001916 max=0.002110 Jy/beam ! Clean residual mean=0.000001 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.247519 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000488672 Jy ! Component: 100 - total flux cleaned = 0.000870079 Jy ! Component: 150 - total flux cleaned = 0.00117259 Jy ! Component: 200 - total flux cleaned = 0.00136455 Jy ! Total flux subtracted in 200 components = 0.00136455 Jy ! Clean residual min=-0.001760 max=0.002098 Jy/beam ! Clean residual mean=0.000000 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.248883 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 134 components and 0.248883 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.998 mas, bmaj=6.357 mas, bpa=-0.4337 degrees ! Estimated noise=882.394 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.41338e-05 Jy ! Component: 100 - total flux cleaned = -1.06558e-05 Jy ! Component: 150 - total flux cleaned = -7.04461e-05 Jy ! Component: 200 - total flux cleaned = -1.55728e-05 Jy ! Total flux subtracted in 200 components = -1.55728e-05 Jy ! Clean residual min=-0.002212 max=0.002285 Jy/beam ! Clean residual mean=0.000000 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.248868 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 150 components and 0.248868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080841Jy sigma=0.000922 ! Fit after self-cal, rms=0.080845Jy sigma=0.000922 wmodel J1716-0452_S_2014_01_04_pus_map.mod ! Writing 150 model components to file: J1716-0452_S_2014_01_04_pus_map.mod wobs J1716-0452_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1716-0452_S_2014_01_04_pus_uvs.fits wwins J1716-0452_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1716-0452_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144634 Jy ! Component: 100 - total flux cleaned = -0.000482182 Jy ! Component: 150 - total flux cleaned = -0.000759382 Jy ! Component: 200 - total flux cleaned = -0.000889398 Jy ! Component: 250 - total flux cleaned = -0.00113606 Jy ! Component: 300 - total flux cleaned = -0.00131262 Jy ! Component: 350 - total flux cleaned = -0.00148275 Jy ! Component: 400 - total flux cleaned = -0.00159243 Jy ! Component: 450 - total flux cleaned = -0.0016984 Jy ! Component: 500 - total flux cleaned = -0.00185234 Jy ! Component: 550 - total flux cleaned = -0.001902 Jy ! Component: 600 - total flux cleaned = -0.00197453 Jy ! Component: 650 - total flux cleaned = -0.00195071 Jy ! Component: 700 - total flux cleaned = -0.00192766 Jy ! Component: 750 - total flux cleaned = -0.00188299 Jy ! Component: 800 - total flux cleaned = -0.00181686 Jy ! Component: 850 - total flux cleaned = -0.001774 Jy ! Component: 900 - total flux cleaned = -0.00175279 Jy ! Component: 950 - total flux cleaned = -0.001773 Jy ! Component: 1000 - total flux cleaned = -0.00175268 Jy ! Component: 1050 - total flux cleaned = -0.00171362 Jy ! Component: 1100 - total flux cleaned = -0.00165548 Jy ! Component: 1150 - total flux cleaned = -0.00159833 Jy ! Component: 1200 - total flux cleaned = -0.00152378 Jy ! Component: 1250 - total flux cleaned = -0.00150574 Jy ! Component: 1300 - total flux cleaned = -0.00141582 Jy ! Component: 1350 - total flux cleaned = -0.00134524 Jy ! Component: 1400 - total flux cleaned = -0.00122371 Jy ! Component: 1450 - total flux cleaned = -0.00112113 Jy ! Component: 1500 - total flux cleaned = -0.00107081 Jy ! Component: 1550 - total flux cleaned = -0.00103774 Jy ! Component: 1600 - total flux cleaned = -0.000972226 Jy ! Component: 1650 - total flux cleaned = -0.000923929 Jy ! Component: 1700 - total flux cleaned = -0.000876321 Jy ! Component: 1750 - total flux cleaned = -0.000813693 Jy ! Component: 1800 - total flux cleaned = -0.000767784 Jy ! Component: 1850 - total flux cleaned = -0.00076769 Jy ! Component: 1900 - total flux cleaned = -0.000707371 Jy ! Component: 1950 - total flux cleaned = -0.000633253 Jy ! Component: 2000 - total flux cleaned = -0.00060399 Jy ! Component: 2050 - total flux cleaned = -0.000575318 Jy ! Component: 2100 - total flux cleaned = -0.00061813 Jy ! Component: 2150 - total flux cleaned = -0.000575706 Jy ! Component: 2200 - total flux cleaned = -0.0005898 Jy ! Component: 2250 - total flux cleaned = -0.000603485 Jy ! Component: 2300 - total flux cleaned = -0.000589812 Jy ! Component: 2350 - total flux cleaned = -0.000603143 Jy ! Component: 2400 - total flux cleaned = -0.000603046 Jy ! Component: 2450 - total flux cleaned = -0.00060282 Jy ! Component: 2500 - total flux cleaned = -0.000550484 Jy ! Component: 2550 - total flux cleaned = -0.000511596 Jy ! Component: 2600 - total flux cleaned = -0.000498767 Jy ! Component: 2650 - total flux cleaned = -0.000448145 Jy ! Component: 2700 - total flux cleaned = -0.000423099 Jy ! Component: 2750 - total flux cleaned = -0.000398068 Jy ! Component: 2800 - total flux cleaned = -0.000373434 Jy ! Component: 2850 - total flux cleaned = -0.000349102 Jy ! Component: 2900 - total flux cleaned = -0.00033713 Jy ! Component: 2950 - total flux cleaned = -0.000361105 Jy ! Component: 3000 - total flux cleaned = -0.000337193 Jy ! Component: 3050 - total flux cleaned = -0.000325398 Jy ! Component: 3100 - total flux cleaned = -0.000325348 Jy ! Component: 3150 - total flux cleaned = -0.000290441 Jy ! Component: 3200 - total flux cleaned = -0.000267363 Jy ! Component: 3250 - total flux cleaned = -0.00022151 Jy ! Component: 3300 - total flux cleaned = -0.000198683 Jy ! Component: 3350 - total flux cleaned = -0.000164774 Jy ! Component: 3400 - total flux cleaned = -9.76495e-05 Jy ! Component: 3450 - total flux cleaned = -4.22919e-05 Jy ! Component: 3500 - total flux cleaned = -5.33917e-05 Jy ! Component: 3550 - total flux cleaned = -2.06356e-05 Jy ! Component: 3600 - total flux cleaned = 1.18292e-06 Jy ! Component: 3650 - total flux cleaned = 4.43868e-05 Jy ! Component: 3700 - total flux cleaned = 7.66826e-05 Jy ! Component: 3750 - total flux cleaned = 9.79993e-05 Jy ! Component: 3800 - total flux cleaned = 0.000140388 Jy ! Component: 3850 - total flux cleaned = 0.000203637 Jy ! Component: 3900 - total flux cleaned = 0.000203628 Jy ! Component: 3950 - total flux cleaned = 0.000224541 Jy ! Component: 4000 - total flux cleaned = 0.000265868 Jy ! Component: 4050 - total flux cleaned = 0.000286434 Jy ! Total flux subtracted in 4096 components = 0.000337596 Jy ! Clean residual min=-0.000711 max=0.000655 Jy/beam ! Clean residual mean=-0.000000 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.249205 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 403 components and 0.249205 Jy ![Exited script file: muppet] wmap "J1716-0452_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.998 x 6.357 at -0.4337 degrees (North through East) ! Clean map min=-0.0023392 max=0.19605 Jy/beam ! Writing clean map to FITS file: J1716-0452_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.196048 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000168268 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.25749 0.25749 0.51498 1.02996 2.05992 4.11984 8.23967 16.4793 32.9587 65.9174 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.196 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.998 x 6.357 at -0.4337 degrees (North through East) ! Clean map min=-0.0023392 max=0.19605 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1716-0452_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:33:08 2017