! Started logfile: J1714-0558_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:32:59 2017 obs J1714-0558_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1714-0558_S_2014_01_04_pus_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.498889 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1714-0558 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5388 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1714-0558_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.828439Jy sigma=0.015815 ! Fit after self-cal, rms=0.741889Jy sigma=0.015090 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.62 mas, bmaj=5.601 mas, bpa=1.309 degrees ! Estimated noise=1077.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.170381 Jy ! Component: 100 - total flux cleaned = 0.215349 Jy ! Total flux subtracted in 100 components = 0.215349 Jy ! Clean residual min=-0.028933 max=0.050192 Jy/beam ! Clean residual mean=0.000041 rms=0.009741 Jy/beam ! Combined flux in latest and established models = 0.215349 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.215349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166067Jy sigma=0.002383 ! Fit after self-cal, rms=0.166041Jy sigma=0.002382 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=6.243 mas, bpa=0.3258 degrees ! Estimated noise=704.272 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0298309 Jy ! Component: 100 - total flux cleaned = 0.0435259 Jy ! Component: 150 - total flux cleaned = 0.0479829 Jy ! Component: 200 - total flux cleaned = 0.0496055 Jy ! Total flux subtracted in 200 components = 0.0496055 Jy ! Clean residual min=-0.030603 max=0.059149 Jy/beam ! Clean residual mean=0.000058 rms=0.012557 Jy/beam ! Combined flux in latest and established models = 0.264954 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 24 components and 0.264954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152884Jy sigma=0.002570 ! Fit after self-cal, rms=0.152683Jy sigma=0.002570 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.56 FD 1.00* KP 1.00* LA 0.84 ! MK 1.05 NL 0.84 OV 0.80 PT 0.87 ! SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 2.65 FD 1.00* KP 1.00* LA 0.87 ! MK 1.04 NL 0.89 OV 0.80 PT 0.86 ! SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.00* KP 1.00* LA 0.78 ! MK 1.04 NL 0.84 OV 0.81 PT 0.83 ! SC 0.91 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.00* KP 1.00* LA 1.45 ! MK 1.02 NL 0.91 OV 0.80 PT 0.92 ! SC 0.86 ! ! ! Fit before self-cal, rms=0.152683Jy sigma=0.002570 ! Fit after self-cal, rms=0.177000Jy sigma=0.001585 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.968 mas, bmaj=6.482 mas, bpa=0.7125 degrees ! Estimated noise=764.679 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0199619 Jy ! Component: 100 - total flux cleaned = 0.0264385 Jy ! Component: 150 - total flux cleaned = 0.0262048 Jy ! Component: 200 - total flux cleaned = 0.0255463 Jy ! Total flux subtracted in 200 components = 0.0255463 Jy ! Clean residual min=-0.022480 max=0.020975 Jy/beam ! Clean residual mean=0.000010 rms=0.006093 Jy/beam ! Combined flux in latest and established models = 0.290501 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 40 components and 0.290501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171354Jy sigma=0.001605 ! Fit after self-cal, rms=0.171035Jy sigma=0.001595 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171035Jy sigma=0.001595 ! Fit after self-cal, rms=0.171160Jy sigma=0.001202 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.961 mas, bmaj=6.397 mas, bpa=0.47 degrees ! Estimated noise=771.206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00669834 Jy ! Component: 100 - total flux cleaned = 0.00927477 Jy ! Component: 150 - total flux cleaned = 0.00975477 Jy ! Component: 200 - total flux cleaned = 0.00982883 Jy ! Total flux subtracted in 200 components = 0.00982883 Jy ! Clean residual min=-0.006484 max=0.005717 Jy/beam ! Clean residual mean=0.000004 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 0.30033 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.30033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170226Jy sigma=0.001204 ! Fit after self-cal, rms=0.170421Jy sigma=0.001200 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000473209 Jy ! Component: 100 - total flux cleaned = 0.000606888 Jy ! Component: 150 - total flux cleaned = 0.000665943 Jy ! Component: 200 - total flux cleaned = 0.00071999 Jy ! Total flux subtracted in 200 components = 0.00071999 Jy ! Clean residual min=-0.005956 max=0.005372 Jy/beam ! Clean residual mean=0.000004 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 0.30105 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.30105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170297Jy sigma=0.001200 ! Fit after self-cal, rms=0.170286Jy sigma=0.001200 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170286Jy sigma=0.001200 ! Fit after self-cal, rms=0.176859Jy sigma=0.001195 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=6.373 mas, bpa=0.3643 degrees ! Estimated noise=787.911 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00603846 Jy ! Component: 100 - total flux cleaned = 0.00906086 Jy ! Component: 150 - total flux cleaned = 0.0105734 Jy ! Component: 200 - total flux cleaned = 0.0109189 Jy ! Total flux subtracted in 200 components = 0.0109189 Jy ! Clean residual min=-0.006001 max=0.005152 Jy/beam ! Clean residual mean=0.000004 rms=0.001450 Jy/beam ! Combined flux in latest and established models = 0.311968 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 62 components and 0.311968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175979Jy sigma=0.001198 ! Fit after self-cal, rms=0.175975Jy sigma=0.001198 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000410889 Jy ! Component: 100 - total flux cleaned = 0.000490495 Jy ! Component: 150 - total flux cleaned = 0.00052546 Jy ! Component: 200 - total flux cleaned = 0.000557555 Jy ! Total flux subtracted in 200 components = 0.000557555 Jy ! Clean residual min=-0.005873 max=0.005055 Jy/beam ! Clean residual mean=0.000004 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 0.312526 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 64 components and 0.312526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175909Jy sigma=0.001198 ! Fit after self-cal, rms=0.175905Jy sigma=0.001198 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175905Jy sigma=0.001198 ! Fit after self-cal, rms=0.181867Jy sigma=0.001194 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.965 mas, bmaj=12.4 mas, bpa=5.493 degrees ! Estimated noise=1041.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.009455 Jy ! Component: 100 - total flux cleaned = 0.0125568 Jy ! Component: 150 - total flux cleaned = 0.0139382 Jy ! Component: 200 - total flux cleaned = 0.0143421 Jy ! Total flux subtracted in 200 components = 0.0143421 Jy ! Clean residual min=-0.009438 max=0.008198 Jy/beam ! Clean residual mean=0.000009 rms=0.002531 Jy/beam ! Combined flux in latest and established models = 0.326868 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 78 components and 0.326868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180909Jy sigma=0.001199 ! Fit after self-cal, rms=0.180903Jy sigma=0.001199 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000300189 Jy ! Component: 100 - total flux cleaned = 0.000367777 Jy ! Component: 150 - total flux cleaned = 0.000398918 Jy ! Component: 200 - total flux cleaned = 0.000425626 Jy ! Total flux subtracted in 200 components = 0.000425626 Jy ! Clean residual min=-0.009380 max=0.008178 Jy/beam ! Clean residual mean=0.000008 rms=0.002526 Jy/beam ! Combined flux in latest and established models = 0.327294 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 83 components and 0.327294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180921Jy sigma=0.001199 ! Fit after self-cal, rms=0.180920Jy sigma=0.001199 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.918 mas, bmaj=6.345 mas, bpa=0.2798 degrees ! Estimated noise=804.32 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.918 x 6.345 at 0.2798 degrees (North through East) ! Clean map min=-0.0057032 max=0.25317 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.48 mas, bmaj=5.615 mas, bpa=0.1143 degrees ! Estimated noise=1209.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.191709 Jy ! Component: 100 - total flux cleaned = 0.25038 Jy ! Component: 150 - total flux cleaned = 0.2792 Jy ! Component: 200 - total flux cleaned = 0.297215 Jy ! Total flux subtracted in 200 components = 0.297215 Jy ! Clean residual min=-0.007586 max=0.009465 Jy/beam ! Clean residual mean=-0.000002 rms=0.002383 Jy/beam ! Combined flux in latest and established models = 0.297215 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.297215 Jy ! Inverting map and beam ! Estimated beam: bmin=2.918 mas, bmaj=6.345 mas, bpa=0.2798 degrees ! Estimated noise=804.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123593 Jy ! Component: 100 - total flux cleaned = 0.0190141 Jy ! Component: 150 - total flux cleaned = 0.0227934 Jy ! Component: 200 - total flux cleaned = 0.0250323 Jy ! Total flux subtracted in 200 components = 0.0250323 Jy ! Clean residual min=-0.005766 max=0.005576 Jy/beam ! Clean residual mean=0.000005 rms=0.001450 Jy/beam ! Combined flux in latest and established models = 0.322247 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 51 components and 0.322247 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.965 mas, bmaj=12.4 mas, bpa=5.493 degrees ! Estimated noise=1041.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318049 Jy ! Component: 100 - total flux cleaned = 0.00441938 Jy ! Component: 150 - total flux cleaned = 0.0046825 Jy ! Component: 200 - total flux cleaned = 0.0047883 Jy ! Total flux subtracted in 200 components = 0.0047883 Jy ! Clean residual min=-0.009394 max=0.008381 Jy/beam ! Clean residual mean=0.000009 rms=0.002538 Jy/beam ! Combined flux in latest and established models = 0.327035 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.11994e-05 Jy ! Component: 100 - total flux cleaned = 0.000124749 Jy ! Component: 150 - total flux cleaned = 0.000175135 Jy ! Component: 200 - total flux cleaned = 0.000223617 Jy ! Total flux subtracted in 200 components = 0.000223617 Jy ! Clean residual min=-0.009363 max=0.008324 Jy/beam ! Clean residual mean=0.000008 rms=0.002530 Jy/beam ! Combined flux in latest and established models = 0.327259 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 66 components and 0.327259 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.918 mas, bmaj=6.345 mas, bpa=0.2798 degrees ! Estimated noise=804.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00181711 Jy ! Component: 100 - total flux cleaned = -0.00202435 Jy ! Component: 150 - total flux cleaned = -0.00202554 Jy ! Component: 200 - total flux cleaned = -0.00199593 Jy ! Total flux subtracted in 200 components = -0.00199593 Jy ! Clean residual min=-0.005694 max=0.005279 Jy/beam ! Clean residual mean=0.000004 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 0.325263 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 69 components and 0.325263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181002Jy sigma=0.001198 ! Fit after self-cal, rms=0.181002Jy sigma=0.001197 wmodel J1714-0558_S_2014_01_04_pus_map.mod ! Writing 69 model components to file: J1714-0558_S_2014_01_04_pus_map.mod wobs J1714-0558_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1714-0558_S_2014_01_04_pus_uvs.fits wwins J1714-0558_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1714-0558_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00172752 Jy ! Component: 100 - total flux cleaned = -0.00271351 Jy ! Component: 150 - total flux cleaned = -0.00312864 Jy ! Component: 200 - total flux cleaned = -0.00352001 Jy ! Component: 250 - total flux cleaned = -0.00374477 Jy ! Component: 300 - total flux cleaned = -0.00410956 Jy ! Component: 350 - total flux cleaned = -0.00446219 Jy ! Component: 400 - total flux cleaned = -0.00473584 Jy ! Component: 450 - total flux cleaned = -0.00493566 Jy ! Component: 500 - total flux cleaned = -0.00519257 Jy ! Component: 550 - total flux cleaned = -0.00538128 Jy ! Component: 600 - total flux cleaned = -0.00556642 Jy ! Component: 650 - total flux cleaned = -0.00574768 Jy ! Component: 700 - total flux cleaned = -0.00586565 Jy ! Component: 750 - total flux cleaned = -0.00603879 Jy ! Component: 800 - total flux cleaned = -0.00598224 Jy ! Component: 850 - total flux cleaned = -0.00603768 Jy ! Component: 900 - total flux cleaned = -0.00598284 Jy ! Component: 950 - total flux cleaned = -0.00598259 Jy ! Component: 1000 - total flux cleaned = -0.0059292 Jy ! Component: 1050 - total flux cleaned = -0.00598073 Jy ! Component: 1100 - total flux cleaned = -0.00598022 Jy ! Component: 1150 - total flux cleaned = -0.00613147 Jy ! Component: 1200 - total flux cleaned = -0.00618074 Jy ! Component: 1250 - total flux cleaned = -0.0061807 Jy ! Component: 1300 - total flux cleaned = -0.00622957 Jy ! Component: 1350 - total flux cleaned = -0.00632582 Jy ! Component: 1400 - total flux cleaned = -0.00637354 Jy ! Component: 1450 - total flux cleaned = -0.00646755 Jy ! Component: 1500 - total flux cleaned = -0.00665294 Jy ! Component: 1550 - total flux cleaned = -0.00674461 Jy ! Component: 1600 - total flux cleaned = -0.00688091 Jy ! Component: 1650 - total flux cleaned = -0.0068812 Jy ! Component: 1700 - total flux cleaned = -0.00701504 Jy ! Component: 1750 - total flux cleaned = -0.00719116 Jy ! Component: 1800 - total flux cleaned = -0.00727784 Jy ! Component: 1850 - total flux cleaned = -0.00732062 Jy ! Component: 1900 - total flux cleaned = -0.00732093 Jy ! Component: 1950 - total flux cleaned = -0.00753315 Jy ! Component: 2000 - total flux cleaned = -0.00765912 Jy ! Component: 2050 - total flux cleaned = -0.00778413 Jy ! Component: 2100 - total flux cleaned = -0.00782509 Jy ! Component: 2150 - total flux cleaned = -0.00790712 Jy ! Component: 2200 - total flux cleaned = -0.00798882 Jy ! Component: 2250 - total flux cleaned = -0.00811023 Jy ! Component: 2300 - total flux cleaned = -0.00806992 Jy ! Component: 2350 - total flux cleaned = -0.00818935 Jy ! Component: 2400 - total flux cleaned = -0.00818946 Jy ! Component: 2450 - total flux cleaned = -0.00826782 Jy ! Component: 2500 - total flux cleaned = -0.0082677 Jy ! Component: 2550 - total flux cleaned = -0.00842227 Jy ! Component: 2600 - total flux cleaned = -0.00853733 Jy ! Component: 2650 - total flux cleaned = -0.00861362 Jy ! Component: 2700 - total flux cleaned = -0.00868977 Jy ! Component: 2750 - total flux cleaned = -0.0088408 Jy ! Component: 2800 - total flux cleaned = -0.00887812 Jy ! Component: 2850 - total flux cleaned = -0.00899034 Jy ! Component: 2900 - total flux cleaned = -0.00902757 Jy ! Component: 2950 - total flux cleaned = -0.00906438 Jy ! Component: 3000 - total flux cleaned = -0.00910093 Jy ! Component: 3050 - total flux cleaned = -0.00910082 Jy ! Component: 3100 - total flux cleaned = -0.00920989 Jy ! Component: 3150 - total flux cleaned = -0.00920993 Jy ! Component: 3200 - total flux cleaned = -0.00935405 Jy ! Component: 3250 - total flux cleaned = -0.0093897 Jy ! Component: 3300 - total flux cleaned = -0.00946082 Jy ! Component: 3350 - total flux cleaned = -0.00949637 Jy ! Component: 3400 - total flux cleaned = -0.00963752 Jy ! Component: 3450 - total flux cleaned = -0.00970776 Jy ! Component: 3500 - total flux cleaned = -0.00977757 Jy ! Component: 3550 - total flux cleaned = -0.0098471 Jy ! Component: 3600 - total flux cleaned = -0.00988154 Jy ! Component: 3650 - total flux cleaned = -0.00988161 Jy ! Component: 3700 - total flux cleaned = -0.00998484 Jy ! Component: 3750 - total flux cleaned = -0.0100193 Jy ! Component: 3800 - total flux cleaned = -0.0101557 Jy ! Component: 3850 - total flux cleaned = -0.0103253 Jy ! Component: 3900 - total flux cleaned = -0.0103927 Jy ! Component: 3950 - total flux cleaned = -0.0104265 Jy ! Component: 4000 - total flux cleaned = -0.0105945 Jy ! Component: 4050 - total flux cleaned = -0.0106279 Jy ! Total flux subtracted in 4096 components = -0.0107281 Jy ! Clean residual min=-0.001925 max=0.001876 Jy/beam ! Clean residual mean=0.000005 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.314535 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 383 components and 0.314535 Jy ![Exited script file: muppet] wmap "J1714-0558_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.918 x 6.345 at 0.2798 degrees (North through East) ! Clean map min=-0.006005 max=0.25592 Jy/beam ! Writing clean map to FITS file: J1714-0558_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.255923 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000638303 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.748235 0.748235 1.49647 2.99294 5.98588 11.9718 23.9435 47.887 95.7741 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.255 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.918 x 6.345 at 0.2798 degrees (North through East) ! Clean map min=-0.006005 max=0.25592 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1714-0558_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:33:04 2017