! Started logfile: J1713+4916_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:30:55 2017 obs J1713+4916_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1713+4916_S_2015_01_23_pus_uva.fits ! AN table 1: 82 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.973442 visibilities/baseline/integration-bin. ! Found source: J1713+4916 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 14368 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1713+4916_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.931673Jy sigma=0.010417 ! Fit after self-cal, rms=0.914203Jy sigma=0.010278 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.961 mas, bmaj=4.325 mas, bpa=-5.051 degrees ! Estimated noise=885.593 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0705213 Jy ! Component: 100 - total flux cleaned = 0.088157 Jy ! Total flux subtracted in 100 components = 0.088157 Jy ! Clean residual min=-0.004907 max=0.007068 Jy/beam ! Clean residual mean=0.000010 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.088157 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.088157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092109Jy sigma=0.000827 ! Fit after self-cal, rms=0.092026Jy sigma=0.000827 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=5.063 mas, bpa=-1.176 degrees ! Estimated noise=541.672 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-24.5, 17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00808472 Jy ! Component: 100 - total flux cleaned = 0.0123196 Jy ! Component: 150 - total flux cleaned = 0.0152223 Jy ! Component: 200 - total flux cleaned = 0.0174014 Jy ! Total flux subtracted in 200 components = 0.0174014 Jy ! Clean residual min=-0.003877 max=0.004826 Jy/beam ! Clean residual mean=0.000030 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.105558 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 36 components and 0.105558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091391Jy sigma=0.000816 ! Fit after self-cal, rms=0.091356Jy sigma=0.000815 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.46 HN 0.94 KP 1.04 ! LA 1.00 MK 1.03 NL 0.98 OV 0.93 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.73 HN 1.01 KP 0.97 ! LA 0.99 MK 1.06 NL 1.08 OV 0.95 ! PT 1.01 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.81 HN 1.02 KP 0.87 ! LA 0.79 MK 1.02 NL 1.18 OV 0.89 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.55 HN 0.95 KP 0.77 ! LA 0.81 MK 1.00 NL 0.95 OV 0.93 ! PT 1.02 SC 0.99 ! ! ! Fit before self-cal, rms=0.091356Jy sigma=0.000815 ! Fit after self-cal, rms=0.115567Jy sigma=0.000798 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=5.099 mas, bpa=-1.407 degrees ! Estimated noise=540.847 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000970536 Jy ! Component: 100 - total flux cleaned = -0.00129345 Jy ! Component: 150 - total flux cleaned = -0.00132506 Jy ! Component: 200 - total flux cleaned = -0.00132565 Jy ! Total flux subtracted in 200 components = -0.00132565 Jy ! Clean residual min=-0.002235 max=0.002337 Jy/beam ! Clean residual mean=0.000029 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.104233 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 59 components and 0.104233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115538Jy sigma=0.000798 ! Fit after self-cal, rms=0.115800Jy sigma=0.000797 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115800Jy sigma=0.000797 ! Fit after self-cal, rms=0.121670Jy sigma=0.000796 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.739 mas, bmaj=5.099 mas, bpa=-0.7067 degrees ! Estimated noise=541.744 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00090388 Jy ! Component: 100 - total flux cleaned = -0.00107194 Jy ! Component: 150 - total flux cleaned = -0.00114335 Jy ! Component: 200 - total flux cleaned = -0.00116415 Jy ! Total flux subtracted in 200 components = -0.00116415 Jy ! Clean residual min=-0.002019 max=0.002079 Jy/beam ! Clean residual mean=0.000026 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.103069 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 73 components and 0.103069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121656Jy sigma=0.000796 ! Fit after self-cal, rms=0.121686Jy sigma=0.000795 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000236422 Jy ! Component: 100 - total flux cleaned = -0.000236458 Jy ! Component: 150 - total flux cleaned = -0.000201694 Jy ! Component: 200 - total flux cleaned = -0.000202411 Jy ! Total flux subtracted in 200 components = -0.000202411 Jy ! Clean residual min=-0.001947 max=0.002104 Jy/beam ! Clean residual mean=0.000026 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.102866 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.102866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121678Jy sigma=0.000795 ! Fit after self-cal, rms=0.121679Jy sigma=0.000795 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121679Jy sigma=0.000795 ! Fit after self-cal, rms=0.122871Jy sigma=0.000795 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.74 mas, bmaj=5.096 mas, bpa=-0.6378 degrees ! Estimated noise=541.341 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000547146 Jy ! Component: 100 - total flux cleaned = -0.000640598 Jy ! Component: 150 - total flux cleaned = -0.000624676 Jy ! Component: 200 - total flux cleaned = -0.00062468 Jy ! Total flux subtracted in 200 components = -0.00062468 Jy ! Clean residual min=-0.001936 max=0.002038 Jy/beam ! Clean residual mean=0.000025 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.102242 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.102242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122864Jy sigma=0.000795 ! Fit after self-cal, rms=0.122871Jy sigma=0.000795 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142209 Jy ! Component: 100 - total flux cleaned = -0.000127849 Jy ! Component: 150 - total flux cleaned = -0.000127931 Jy ! Component: 200 - total flux cleaned = -0.000100938 Jy ! Total flux subtracted in 200 components = -0.000100938 Jy ! Clean residual min=-0.001913 max=0.002047 Jy/beam ! Clean residual mean=0.000025 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.102141 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 81 components and 0.102141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122864Jy sigma=0.000795 ! Fit after self-cal, rms=0.122865Jy sigma=0.000795 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122865Jy sigma=0.000795 ! Fit after self-cal, rms=0.123390Jy sigma=0.000795 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.571 mas, bmaj=8.785 mas, bpa=13.48 degrees ! Estimated noise=685.182 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00043851 Jy ! Component: 100 - total flux cleaned = -0.000481321 Jy ! Component: 150 - total flux cleaned = -0.00046883 Jy ! Component: 200 - total flux cleaned = -0.000457064 Jy ! Total flux subtracted in 200 components = -0.000457064 Jy ! Clean residual min=-0.002867 max=0.002759 Jy/beam ! Clean residual mean=0.000058 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.101684 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.101684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123387Jy sigma=0.000795 ! Fit after self-cal, rms=0.123391Jy sigma=0.000795 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.13861e-05 Jy ! Component: 100 - total flux cleaned = -8.19033e-05 Jy ! Component: 150 - total flux cleaned = -8.19865e-05 Jy ! Component: 200 - total flux cleaned = -7.22809e-05 Jy ! Total flux subtracted in 200 components = -7.22809e-05 Jy ! Clean residual min=-0.002867 max=0.002750 Jy/beam ! Clean residual mean=0.000057 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.101611 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 95 components and 0.101611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123388Jy sigma=0.000795 ! Fit after self-cal, rms=0.123388Jy sigma=0.000795 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.741 mas, bmaj=5.094 mas, bpa=-0.6391 degrees ! Estimated noise=541.06 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.741 x 5.094 at -0.6391 degrees (North through East) ! Clean map min=-0.0018254 max=0.091657 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.997 mas, bmaj=4.343 mas, bpa=-4.88 degrees ! Estimated noise=881.778 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0698889 Jy ! Component: 100 - total flux cleaned = 0.0873311 Jy ! Component: 150 - total flux cleaned = 0.0943818 Jy ! Component: 200 - total flux cleaned = 0.0983934 Jy ! Total flux subtracted in 200 components = 0.0983934 Jy ! Clean residual min=-0.002750 max=0.002623 Jy/beam ! Clean residual mean=0.000008 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.0983934 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0983934 Jy ! Inverting map and beam ! Estimated beam: bmin=3.741 mas, bmaj=5.094 mas, bpa=-0.6391 degrees ! Estimated noise=541.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204047 Jy ! Component: 100 - total flux cleaned = 0.00217889 Jy ! Component: 150 - total flux cleaned = 0.002334 Jy ! Component: 200 - total flux cleaned = 0.00240056 Jy ! Total flux subtracted in 200 components = 0.00240056 Jy ! Clean residual min=-0.002093 max=0.002080 Jy/beam ! Clean residual mean=0.000024 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.100794 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 32 components and 0.100794 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.571 mas, bmaj=8.785 mas, bpa=13.48 degrees ! Estimated noise=685.182 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000484069 Jy ! Component: 100 - total flux cleaned = 0.000624068 Jy ! Component: 150 - total flux cleaned = 0.000624408 Jy ! Component: 200 - total flux cleaned = 0.000624883 Jy ! Total flux subtracted in 200 components = 0.000624883 Jy ! Clean residual min=-0.002857 max=0.002782 Jy/beam ! Clean residual mean=0.000056 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.101419 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.70302e-07 Jy ! Component: 100 - total flux cleaned = 1.54749e-05 Jy ! Component: 150 - total flux cleaned = 2.88074e-05 Jy ! Component: 200 - total flux cleaned = 4.08937e-05 Jy ! Total flux subtracted in 200 components = 4.08937e-05 Jy ! Clean residual min=-0.002848 max=0.002765 Jy/beam ! Clean residual mean=0.000056 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.10146 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 52 components and 0.10146 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.741 mas, bmaj=5.094 mas, bpa=-0.6391 degrees ! Estimated noise=541.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114154 Jy ! Component: 100 - total flux cleaned = -6.11472e-05 Jy ! Component: 150 - total flux cleaned = -6.20527e-05 Jy ! Component: 200 - total flux cleaned = -6.27808e-05 Jy ! Total flux subtracted in 200 components = -6.27808e-05 Jy ! Clean residual min=-0.001981 max=0.002049 Jy/beam ! Clean residual mean=0.000025 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.101397 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 66 components and 0.101397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123404Jy sigma=0.000795 ! Fit after self-cal, rms=0.123405Jy sigma=0.000795 wmodel J1713+4916_S_2015_01_23_pus_map.mod ! Writing 66 model components to file: J1713+4916_S_2015_01_23_pus_map.mod wobs J1713+4916_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1713+4916_S_2015_01_23_pus_uvs.fits wwins J1713+4916_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J1713+4916_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000306447 Jy ! Component: 100 - total flux cleaned = 0.000752377 Jy ! Component: 150 - total flux cleaned = 0.00110703 Jy ! Component: 200 - total flux cleaned = 0.00141412 Jy ! Component: 250 - total flux cleaned = 0.00156147 Jy ! Component: 300 - total flux cleaned = 0.00176147 Jy ! Component: 350 - total flux cleaned = 0.00184509 Jy ! Component: 400 - total flux cleaned = 0.00187243 Jy ! Component: 450 - total flux cleaned = 0.00197844 Jy ! Component: 500 - total flux cleaned = 0.00205651 Jy ! Component: 550 - total flux cleaned = 0.00221026 Jy ! Component: 600 - total flux cleaned = 0.00233589 Jy ! Component: 650 - total flux cleaned = 0.00238559 Jy ! Component: 700 - total flux cleaned = 0.00248331 Jy ! Component: 750 - total flux cleaned = 0.00257969 Jy ! Component: 800 - total flux cleaned = 0.0026979 Jy ! Component: 850 - total flux cleaned = 0.00274447 Jy ! Component: 900 - total flux cleaned = 0.00292768 Jy ! Component: 950 - total flux cleaned = 0.00297265 Jy ! Component: 1000 - total flux cleaned = 0.00308391 Jy ! Component: 1050 - total flux cleaned = 0.00319341 Jy ! Component: 1100 - total flux cleaned = 0.00319357 Jy ! Component: 1150 - total flux cleaned = 0.00332198 Jy ! Component: 1200 - total flux cleaned = 0.0034482 Jy ! Component: 1250 - total flux cleaned = 0.00346909 Jy ! Component: 1300 - total flux cleaned = 0.00357189 Jy ! Component: 1350 - total flux cleaned = 0.00363248 Jy ! Component: 1400 - total flux cleaned = 0.00377278 Jy ! Component: 1450 - total flux cleaned = 0.00385167 Jy ! Component: 1500 - total flux cleaned = 0.00398836 Jy ! Component: 1550 - total flux cleaned = 0.00410434 Jy ! Component: 1600 - total flux cleaned = 0.00425686 Jy ! Component: 1650 - total flux cleaned = 0.00431323 Jy ! Component: 1700 - total flux cleaned = 0.00440673 Jy ! Component: 1750 - total flux cleaned = 0.00457343 Jy ! Component: 1800 - total flux cleaned = 0.00464675 Jy ! Component: 1850 - total flux cleaned = 0.00477373 Jy ! Component: 1900 - total flux cleaned = 0.00480975 Jy ! Component: 1950 - total flux cleaned = 0.00493451 Jy ! Component: 2000 - total flux cleaned = 0.00496982 Jy ! Component: 2050 - total flux cleaned = 0.00512733 Jy ! Component: 2100 - total flux cleaned = 0.00517904 Jy ! Component: 2150 - total flux cleaned = 0.00517917 Jy ! Component: 2200 - total flux cleaned = 0.00526431 Jy ! Component: 2250 - total flux cleaned = 0.00528148 Jy ! Component: 2300 - total flux cleaned = 0.00539863 Jy ! Component: 2350 - total flux cleaned = 0.00538218 Jy ! Component: 2400 - total flux cleaned = 0.00539888 Jy ! Component: 2450 - total flux cleaned = 0.00549699 Jy ! Component: 2500 - total flux cleaned = 0.00556186 Jy ! Component: 2550 - total flux cleaned = 0.0056261 Jy ! Component: 2600 - total flux cleaned = 0.00567385 Jy ! Component: 2650 - total flux cleaned = 0.00570551 Jy ! Component: 2700 - total flux cleaned = 0.0057526 Jy ! Component: 2750 - total flux cleaned = 0.00583032 Jy ! Component: 2800 - total flux cleaned = 0.00586118 Jy ! Component: 2850 - total flux cleaned = 0.00587645 Jy ! Component: 2900 - total flux cleaned = 0.00589176 Jy ! Component: 2950 - total flux cleaned = 0.0059372 Jy ! Component: 3000 - total flux cleaned = 0.00596709 Jy ! Component: 3050 - total flux cleaned = 0.00595214 Jy ! Component: 3100 - total flux cleaned = 0.00599652 Jy ! Component: 3150 - total flux cleaned = 0.00596697 Jy ! Component: 3200 - total flux cleaned = 0.00601056 Jy ! Component: 3250 - total flux cleaned = 0.00603963 Jy ! Component: 3300 - total flux cleaned = 0.00602514 Jy ! Component: 3350 - total flux cleaned = 0.00601083 Jy ! Component: 3400 - total flux cleaned = 0.00605363 Jy ! Component: 3450 - total flux cleaned = 0.00605359 Jy ! Component: 3500 - total flux cleaned = 0.00608153 Jy ! Component: 3550 - total flux cleaned = 0.0060396 Jy ! Component: 3600 - total flux cleaned = 0.00608118 Jy ! Component: 3650 - total flux cleaned = 0.00610877 Jy ! Component: 3700 - total flux cleaned = 0.00608133 Jy ! Component: 3750 - total flux cleaned = 0.00606778 Jy ! Component: 3800 - total flux cleaned = 0.00617626 Jy ! Component: 3850 - total flux cleaned = 0.00614941 Jy ! Component: 3900 - total flux cleaned = 0.0061895 Jy ! Component: 3950 - total flux cleaned = 0.0061894 Jy ! Component: 4000 - total flux cleaned = 0.00622909 Jy ! Component: 4050 - total flux cleaned = 0.00624224 Jy ! Total flux subtracted in 4096 components = 0.00622922 Jy ! Clean residual min=-0.000726 max=0.000736 Jy/beam ! Clean residual mean=0.000007 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.107626 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 352 components and 0.107626 Jy ![Exited script file: muppet] wmap "J1713+4916_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.741 x 5.094 at -0.6391 degrees (North through East) ! Clean map min=-0.0013543 max=0.091501 Jy/beam ! Writing clean map to FITS file: J1713+4916_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0915013 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000235127 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.770898 0.770898 1.5418 3.08359 6.16719 12.3344 24.6687 49.3375 98.675 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.091 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.741 x 5.094 at -0.6391 degrees (North through East) ! Clean map min=-0.0013543 max=0.091501 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1713+4916_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:31:00 2017