! Started logfile: J1711+5411_S_2015_01_22_pus_uvs.log on Tue Jan 3 23:00:16 2017 obs J1711+5411_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1711+5411_S_2015_01_22_pus_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1711+5411 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 4320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1711+5411_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.835248Jy sigma=0.010057 ! Fit after self-cal, rms=0.830009Jy sigma=0.009993 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.532 mas, bmaj=9.622 mas, bpa=44.8 degrees ! Estimated noise=1277.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130119 Jy ! Component: 100 - total flux cleaned = 0.159064 Jy ! Total flux subtracted in 100 components = 0.159064 Jy ! Clean residual min=-0.007100 max=0.010091 Jy/beam ! Clean residual mean=-0.000018 rms=0.001863 Jy/beam ! Combined flux in latest and established models = 0.159064 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.159064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073880Jy sigma=0.000818 ! Fit after self-cal, rms=0.073881Jy sigma=0.000818 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=9.818 mas, bpa=44.05 degrees ! Estimated noise=909.345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133284 Jy ! Component: 100 - total flux cleaned = 0.0190627 Jy ! Component: 150 - total flux cleaned = 0.0219349 Jy ! Component: 200 - total flux cleaned = 0.0238851 Jy ! Total flux subtracted in 200 components = 0.0238851 Jy ! Clean residual min=-0.004626 max=0.004474 Jy/beam ! Clean residual mean=-0.000025 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.182949 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 26 components and 0.182949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071398Jy sigma=0.000794 ! Fit after self-cal, rms=0.071407Jy sigma=0.000793 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.96 KP 1.11 ! LA 1.09 MK 1.02 NL 0.98 OV 0.99 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.03 KP 1.07 ! LA 1.02 MK 1.05 NL 0.97 OV 1.00 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.03 KP 0.91 ! LA 0.83 MK 1.05 NL 1.06 OV 0.92 ! PT 1.04 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 0.97 KP 0.81 ! LA 0.91 MK 1.05 NL 1.00 OV 0.98 ! PT 1.04 SC 0.99 ! ! ! Fit before self-cal, rms=0.071407Jy sigma=0.000793 ! Fit after self-cal, rms=0.067629Jy sigma=0.000771 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=9.79 mas, bpa=44 degrees ! Estimated noise=904.707 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.59969e-05 Jy ! Component: 100 - total flux cleaned = -0.000212897 Jy ! Component: 150 - total flux cleaned = -0.000322731 Jy ! Component: 200 - total flux cleaned = -0.000322849 Jy ! Total flux subtracted in 200 components = -0.000322849 Jy ! Clean residual min=-0.002254 max=0.002247 Jy/beam ! Clean residual mean=-0.000027 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.182626 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.182626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067602Jy sigma=0.000771 ! Fit after self-cal, rms=0.067587Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067587Jy sigma=0.000771 ! Fit after self-cal, rms=0.067631Jy sigma=0.000771 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=9.787 mas, bpa=44 degrees ! Estimated noise=904.865 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000328703 Jy ! Component: 100 - total flux cleaned = -0.000350426 Jy ! Component: 150 - total flux cleaned = -0.000350157 Jy ! Component: 200 - total flux cleaned = -0.000368985 Jy ! Total flux subtracted in 200 components = -0.000368985 Jy ! Clean residual min=-0.002193 max=0.002221 Jy/beam ! Clean residual mean=-0.000027 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.182257 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.182257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067619Jy sigma=0.000770 ! Fit after self-cal, rms=0.067619Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.77848e-05 Jy ! Component: 100 - total flux cleaned = -3.39156e-05 Jy ! Component: 150 - total flux cleaned = -7.78282e-05 Jy ! Component: 200 - total flux cleaned = -7.7144e-05 Jy ! Total flux subtracted in 200 components = -7.7144e-05 Jy ! Clean residual min=-0.002215 max=0.002204 Jy/beam ! Clean residual mean=-0.000027 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.18218 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.18218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067614Jy sigma=0.000770 ! Fit after self-cal, rms=0.067613Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067613Jy sigma=0.000770 ! Fit after self-cal, rms=0.067614Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.155 mas, bmaj=9.785 mas, bpa=44 degrees ! Estimated noise=904.592 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000379554 Jy ! Component: 100 - total flux cleaned = -0.00042164 Jy ! Component: 150 - total flux cleaned = -0.00047139 Jy ! Component: 200 - total flux cleaned = -0.00048257 Jy ! Total flux subtracted in 200 components = -0.00048257 Jy ! Clean residual min=-0.002235 max=0.002167 Jy/beam ! Clean residual mean=-0.000027 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.181697 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 0.181697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067609Jy sigma=0.000770 ! Fit after self-cal, rms=0.067609Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.38492e-05 Jy ! Component: 100 - total flux cleaned = -4.37698e-05 Jy ! Component: 150 - total flux cleaned = -4.35448e-05 Jy ! Component: 200 - total flux cleaned = -3.4554e-05 Jy ! Total flux subtracted in 200 components = -3.4554e-05 Jy ! Clean residual min=-0.002255 max=0.002165 Jy/beam ! Clean residual mean=-0.000027 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.181663 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 57 components and 0.181663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067607Jy sigma=0.000770 ! Fit after self-cal, rms=0.067607Jy sigma=0.000770 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067607Jy sigma=0.000770 ! Fit after self-cal, rms=0.067590Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.414 mas, bmaj=10.53 mas, bpa=40.82 degrees ! Estimated noise=1142.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000349515 Jy ! Component: 100 - total flux cleaned = -0.000411267 Jy ! Component: 150 - total flux cleaned = -0.000425091 Jy ! Component: 200 - total flux cleaned = -0.000430821 Jy ! Total flux subtracted in 200 components = -0.000430821 Jy ! Clean residual min=-0.002456 max=0.001911 Jy/beam ! Clean residual mean=-0.000065 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.181232 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.181232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067589Jy sigma=0.000770 ! Fit after self-cal, rms=0.067589Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.51194e-05 Jy ! Component: 100 - total flux cleaned = -4.77027e-06 Jy ! Component: 150 - total flux cleaned = 9.0058e-06 Jy ! Component: 200 - total flux cleaned = 1.32219e-05 Jy ! Total flux subtracted in 200 components = 1.32219e-05 Jy ! Clean residual min=-0.002481 max=0.001891 Jy/beam ! Clean residual mean=-0.000065 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.181245 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 0.181245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067589Jy sigma=0.000770 ! Fit after self-cal, rms=0.067588Jy sigma=0.000770 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.157 mas, bmaj=9.783 mas, bpa=44 degrees ! Estimated noise=904.095 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.157 x 9.783 at 44 degrees (North through East) ! Clean map min=-0.0021907 max=0.17032 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.55 mas, bmaj=9.565 mas, bpa=44.74 degrees ! Estimated noise=1270.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129435 Jy ! Component: 100 - total flux cleaned = 0.157934 Jy ! Component: 150 - total flux cleaned = 0.167944 Jy ! Component: 200 - total flux cleaned = 0.173089 Jy ! Total flux subtracted in 200 components = 0.173089 Jy ! Clean residual min=-0.004044 max=0.004600 Jy/beam ! Clean residual mean=-0.000013 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.173089 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.173089 Jy ! Inverting map and beam ! Estimated beam: bmin=3.157 mas, bmaj=9.783 mas, bpa=44 degrees ! Estimated noise=904.095 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040768 Jy ! Component: 100 - total flux cleaned = 0.00594263 Jy ! Component: 150 - total flux cleaned = 0.00680217 Jy ! Component: 200 - total flux cleaned = 0.00714665 Jy ! Total flux subtracted in 200 components = 0.00714665 Jy ! Clean residual min=-0.002267 max=0.002302 Jy/beam ! Clean residual mean=-0.000029 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.180236 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 38 components and 0.180236 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.414 mas, bmaj=10.53 mas, bpa=40.82 degrees ! Estimated noise=1142.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275186 Jy ! Component: 100 - total flux cleaned = 0.00052961 Jy ! Component: 150 - total flux cleaned = 0.000701857 Jy ! Component: 200 - total flux cleaned = 0.000749711 Jy ! Total flux subtracted in 200 components = 0.000749711 Jy ! Clean residual min=-0.002425 max=0.001855 Jy/beam ! Clean residual mean=-0.000066 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.180985 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.2017e-05 Jy ! Component: 100 - total flux cleaned = 6.72451e-05 Jy ! Component: 150 - total flux cleaned = 0.000101943 Jy ! Component: 200 - total flux cleaned = 0.000132635 Jy ! Total flux subtracted in 200 components = 0.000132635 Jy ! Clean residual min=-0.002456 max=0.001867 Jy/beam ! Clean residual mean=-0.000066 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.181118 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 69 components and 0.181118 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.157 mas, bmaj=9.783 mas, bpa=44 degrees ! Estimated noise=904.095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.84755e-05 Jy ! Component: 100 - total flux cleaned = 6.24379e-05 Jy ! Component: 150 - total flux cleaned = 0.000122586 Jy ! Component: 200 - total flux cleaned = 0.000173806 Jy ! Total flux subtracted in 200 components = 0.000173806 Jy ! Clean residual min=-0.002268 max=0.002212 Jy/beam ! Clean residual mean=-0.000027 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.181292 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 84 components and 0.181292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067596Jy sigma=0.000770 ! Fit after self-cal, rms=0.067595Jy sigma=0.000770 wmodel J1711+5411_S_2015_01_22_pus_map.mod ! Writing 84 model components to file: J1711+5411_S_2015_01_22_pus_map.mod wobs J1711+5411_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1711+5411_S_2015_01_22_pus_uvs.fits wwins J1711+5411_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1711+5411_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00029108 Jy ! Component: 100 - total flux cleaned = -0.000777023 Jy ! Component: 150 - total flux cleaned = -0.00112815 Jy ! Component: 200 - total flux cleaned = -0.00122791 Jy ! Component: 250 - total flux cleaned = -0.00122754 Jy ! Component: 300 - total flux cleaned = -0.00122696 Jy ! Component: 350 - total flux cleaned = -0.0012276 Jy ! Component: 400 - total flux cleaned = -0.00128565 Jy ! Component: 450 - total flux cleaned = -0.00139768 Jy ! Component: 500 - total flux cleaned = -0.00142415 Jy ! Component: 550 - total flux cleaned = -0.00142423 Jy ! Component: 600 - total flux cleaned = -0.00147577 Jy ! Component: 650 - total flux cleaned = -0.00150046 Jy ! Component: 700 - total flux cleaned = -0.00142646 Jy ! Component: 750 - total flux cleaned = -0.00142682 Jy ! Component: 800 - total flux cleaned = -0.00140353 Jy ! Component: 850 - total flux cleaned = -0.00144992 Jy ! Component: 900 - total flux cleaned = -0.00142788 Jy ! Component: 950 - total flux cleaned = -0.00138368 Jy ! Component: 1000 - total flux cleaned = -0.00136189 Jy ! Component: 1050 - total flux cleaned = -0.00136184 Jy ! Component: 1100 - total flux cleaned = -0.00134094 Jy ! Component: 1150 - total flux cleaned = -0.00129978 Jy ! Component: 1200 - total flux cleaned = -0.00127973 Jy ! Component: 1250 - total flux cleaned = -0.00122031 Jy ! Component: 1300 - total flux cleaned = -0.0012592 Jy ! Component: 1350 - total flux cleaned = -0.00124001 Jy ! Component: 1400 - total flux cleaned = -0.00127765 Jy ! Component: 1450 - total flux cleaned = -0.00124054 Jy ! Component: 1500 - total flux cleaned = -0.00124077 Jy ! Component: 1550 - total flux cleaned = -0.00124101 Jy ! Component: 1600 - total flux cleaned = -0.00131186 Jy ! Component: 1650 - total flux cleaned = -0.0012942 Jy ! Component: 1700 - total flux cleaned = -0.00132883 Jy ! Component: 1750 - total flux cleaned = -0.00136307 Jy ! Component: 1800 - total flux cleaned = -0.00141374 Jy ! Component: 1850 - total flux cleaned = -0.00146365 Jy ! Component: 1900 - total flux cleaned = -0.00156191 Jy ! Component: 1950 - total flux cleaned = -0.00161028 Jy ! Component: 2000 - total flux cleaned = -0.00170579 Jy ! Component: 2050 - total flux cleaned = -0.00175314 Jy ! Component: 2100 - total flux cleaned = -0.00183127 Jy ! Component: 2150 - total flux cleaned = -0.00184713 Jy ! Component: 2200 - total flux cleaned = -0.00195411 Jy ! Component: 2250 - total flux cleaned = -0.00204502 Jy ! Component: 2300 - total flux cleaned = -0.00209 Jy ! Component: 2350 - total flux cleaned = -0.00214917 Jy ! Component: 2400 - total flux cleaned = -0.00217857 Jy ! Component: 2450 - total flux cleaned = -0.00229447 Jy ! Component: 2500 - total flux cleaned = -0.00233758 Jy ! Component: 2550 - total flux cleaned = -0.00242291 Jy ! Component: 2600 - total flux cleaned = -0.00246498 Jy ! Component: 2650 - total flux cleaned = -0.00246517 Jy ! Component: 2700 - total flux cleaned = -0.00256236 Jy ! Component: 2750 - total flux cleaned = -0.00264479 Jy ! Component: 2800 - total flux cleaned = -0.0027265 Jy ! Component: 2850 - total flux cleaned = -0.00275356 Jy ! Component: 2900 - total flux cleaned = -0.00282062 Jy ! Component: 2950 - total flux cleaned = -0.00292698 Jy ! Component: 3000 - total flux cleaned = -0.00299302 Jy ! Component: 3050 - total flux cleaned = -0.0030981 Jy ! Component: 3100 - total flux cleaned = -0.00318954 Jy ! Component: 3150 - total flux cleaned = -0.00328039 Jy ! Component: 3200 - total flux cleaned = -0.00338373 Jy ! Component: 3250 - total flux cleaned = -0.00347375 Jy ! Component: 3300 - total flux cleaned = -0.00356345 Jy ! Component: 3350 - total flux cleaned = -0.00367827 Jy ! Component: 3400 - total flux cleaned = -0.00374185 Jy ! Component: 3450 - total flux cleaned = -0.00388116 Jy ! Component: 3500 - total flux cleaned = -0.00394426 Jy ! Component: 3550 - total flux cleaned = -0.00404496 Jy ! Component: 3600 - total flux cleaned = -0.00417034 Jy ! Component: 3650 - total flux cleaned = -0.00424528 Jy ! Component: 3700 - total flux cleaned = -0.00431994 Jy ! Component: 3750 - total flux cleaned = -0.00441931 Jy ! Component: 3800 - total flux cleaned = -0.00448133 Jy ! Component: 3850 - total flux cleaned = -0.00455548 Jy ! Component: 3900 - total flux cleaned = -0.00465416 Jy ! Component: 3950 - total flux cleaned = -0.00474031 Jy ! Component: 4000 - total flux cleaned = -0.00481399 Jy ! Component: 4050 - total flux cleaned = -0.00489977 Jy ! Total flux subtracted in 4096 components = -0.00497326 Jy ! Clean residual min=-0.000925 max=0.000721 Jy/beam ! Clean residual mean=-0.000006 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.176318 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 385 components and 0.176318 Jy ![Exited script file: muppet] wmap "J1711+5411_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.157 x 9.783 at 44 degrees (North through East) ! Clean map min=-0.0016148 max=0.17068 Jy/beam ! Writing clean map to FITS file: J1711+5411_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.170683 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000209967 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.369048 0.369048 0.738096 1.47619 2.95238 5.90477 11.8095 23.6191 47.2382 94.4763 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.17 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.157 x 9.783 at 44 degrees (North through East) ! Clean map min=-0.0016148 max=0.17068 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1711+5411_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 23:00:21 2017