! Started logfile: J1709-1728_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:30:51 2017 obs J1709-1728_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1709-1728_S_2015_01_23_pus_uva.fits ! AN table 1: 28 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.676984 visibilities/baseline/integration-bin. ! Found source: J1709-1728 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 3412 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1709-1728_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.974554Jy sigma=0.004972 ! Fit after self-cal, rms=0.877163Jy sigma=0.004883 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.634 mas, bmaj=7.072 mas, bpa=-4.951 degrees ! Estimated noise=1891.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.341983 Jy ! Component: 100 - total flux cleaned = 0.424377 Jy ! Total flux subtracted in 100 components = 0.424377 Jy ! Clean residual min=-0.022292 max=0.033467 Jy/beam ! Clean residual mean=-0.000059 rms=0.006163 Jy/beam ! Combined flux in latest and established models = 0.424377 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.424377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.753954Jy sigma=0.001266 ! Fit after self-cal, rms=0.753945Jy sigma=0.001266 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.27 mas, bmaj=8.351 mas, bpa=-4.32 degrees ! Estimated noise=1526.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0617255 Jy ! Component: 100 - total flux cleaned = 0.0898445 Jy ! Component: 150 - total flux cleaned = 0.104692 Jy ! Component: 200 - total flux cleaned = 0.112834 Jy ! Total flux subtracted in 200 components = 0.112834 Jy ! Clean residual min=-0.017817 max=0.028226 Jy/beam ! Clean residual mean=-0.000055 rms=0.006167 Jy/beam ! Combined flux in latest and established models = 0.53721 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 51 components and 0.53721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.743030Jy sigma=0.001084 ! Fit after self-cal, rms=0.742957Jy sigma=0.001083 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.32 HN 1.00 KP 1.08 ! LA 1.00 MK 1.02 NL 1.42 OV 0.96 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.88 HN 1.04 KP 1.00 ! LA 0.96 MK 1.02 NL 1.36 OV 0.99 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.14 HN 1.09 KP 0.87 ! LA 0.79 MK 1.03 NL 1.25 OV 0.93 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.08 HN 0.99 KP 0.79 ! LA 0.85 MK 1.05 NL 1.03 OV 0.97 ! PT 1.00 SC 0.97 ! ! ! Fit before self-cal, rms=0.742957Jy sigma=0.001083 ! Fit after self-cal, rms=0.347517Jy sigma=0.000810 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.311 mas, bmaj=8.428 mas, bpa=-3.903 degrees ! Estimated noise=1542.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000933379 Jy ! Component: 100 - total flux cleaned = 0.00102307 Jy ! Component: 150 - total flux cleaned = 0.00101837 Jy ! Component: 200 - total flux cleaned = 0.000948224 Jy ! Total flux subtracted in 200 components = 0.000948224 Jy ! Clean residual min=-0.007466 max=0.008518 Jy/beam ! Clean residual mean=-0.000005 rms=0.002005 Jy/beam ! Combined flux in latest and established models = 0.538159 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 58 components and 0.538158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.347423Jy sigma=0.000809 ! Fit after self-cal, rms=0.347595Jy sigma=0.000809 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.347595Jy sigma=0.000809 ! Fit after self-cal, rms=0.344715Jy sigma=0.000787 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=8.414 mas, bpa=-3.832 degrees ! Estimated noise=1541.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187607 Jy ! Component: 100 - total flux cleaned = 0.000192318 Jy ! Component: 150 - total flux cleaned = 0.000191673 Jy ! Component: 200 - total flux cleaned = 0.000138779 Jy ! Total flux subtracted in 200 components = 0.000138779 Jy ! Clean residual min=-0.004838 max=0.007163 Jy/beam ! Clean residual mean=-0.000004 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.538297 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 63 components and 0.538297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.344697Jy sigma=0.000787 ! Fit after self-cal, rms=0.344827Jy sigma=0.000787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.5, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00675412 Jy ! Component: 100 - total flux cleaned = 0.00844344 Jy ! Component: 150 - total flux cleaned = 0.00870285 Jy ! Component: 200 - total flux cleaned = 0.00862808 Jy ! Total flux subtracted in 200 components = 0.00862808 Jy ! Clean residual min=-0.004522 max=0.004796 Jy/beam ! Clean residual mean=-0.000006 rms=0.001197 Jy/beam ! Combined flux in latest and established models = 0.546925 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 88 components and 0.546925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.344604Jy sigma=0.000783 ! Fit after self-cal, rms=0.344542Jy sigma=0.000783 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.344542Jy sigma=0.000783 ! Fit after self-cal, rms=0.344292Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.311 mas, bmaj=8.406 mas, bpa=-3.817 degrees ! Estimated noise=1539.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266753 Jy ! Component: 100 - total flux cleaned = 0.00294684 Jy ! Component: 150 - total flux cleaned = 0.003001 Jy ! Component: 200 - total flux cleaned = 0.00295089 Jy ! Total flux subtracted in 200 components = 0.00295089 Jy ! Clean residual min=-0.004655 max=0.004257 Jy/beam ! Clean residual mean=-0.000007 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 0.549876 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 109 components and 0.549876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.344221Jy sigma=0.000781 ! Fit after self-cal, rms=0.344221Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000664556 Jy ! Component: 100 - total flux cleaned = 0.000573639 Jy ! Component: 150 - total flux cleaned = 0.000532988 Jy ! Component: 200 - total flux cleaned = 0.000494654 Jy ! Total flux subtracted in 200 components = 0.000494654 Jy ! Clean residual min=-0.004632 max=0.004201 Jy/beam ! Clean residual mean=-0.000007 rms=0.001119 Jy/beam ! Combined flux in latest and established models = 0.550371 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 114 components and 0.550371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.344187Jy sigma=0.000781 ! Fit after self-cal, rms=0.344181Jy sigma=0.000781 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.344181Jy sigma=0.000781 ! Fit after self-cal, rms=0.343612Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.348 mas, bmaj=16.99 mas, bpa=4.528 degrees ! Estimated noise=1908.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000772262 Jy ! Component: 100 - total flux cleaned = 0.000830461 Jy ! Component: 150 - total flux cleaned = 0.000857176 Jy ! Component: 200 - total flux cleaned = 0.000838288 Jy ! Total flux subtracted in 200 components = 0.000838288 Jy ! Clean residual min=-0.004368 max=0.004277 Jy/beam ! Clean residual mean=-0.000011 rms=0.001279 Jy/beam ! Combined flux in latest and established models = 0.551209 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 134 components and 0.551209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343591Jy sigma=0.000781 ! Fit after self-cal, rms=0.343578Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.51587e-05 Jy ! Component: 100 - total flux cleaned = -9.7878e-05 Jy ! Component: 150 - total flux cleaned = -0.000116599 Jy ! Component: 200 - total flux cleaned = -0.000116601 Jy ! Total flux subtracted in 200 components = -0.000116601 Jy ! Clean residual min=-0.004368 max=0.004294 Jy/beam ! Clean residual mean=-0.000011 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 0.551093 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 138 components and 0.551093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343573Jy sigma=0.000781 ! Fit after self-cal, rms=0.343567Jy sigma=0.000781 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=8.406 mas, bpa=-3.798 degrees ! Estimated noise=1539.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.312 x 8.406 at -3.798 degrees (North through East) ! Clean map min=-0.0045379 max=0.4546 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.641 mas, bmaj=7.06 mas, bpa=-4.446 degrees ! Estimated noise=1939.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.350273 Jy ! Component: 100 - total flux cleaned = 0.435697 Jy ! Component: 150 - total flux cleaned = 0.474118 Jy ! Component: 200 - total flux cleaned = 0.495018 Jy ! Total flux subtracted in 200 components = 0.495018 Jy ! Clean residual min=-0.007600 max=0.010363 Jy/beam ! Clean residual mean=-0.000015 rms=0.002132 Jy/beam ! Combined flux in latest and established models = 0.495018 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.495018 Jy ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=8.406 mas, bpa=-3.798 degrees ! Estimated noise=1539.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0199423 Jy ! Component: 100 - total flux cleaned = 0.0310782 Jy ! Component: 150 - total flux cleaned = 0.0384695 Jy ! Component: 200 - total flux cleaned = 0.0436989 Jy ! Total flux subtracted in 200 components = 0.0436989 Jy ! Clean residual min=-0.005036 max=0.004757 Jy/beam ! Clean residual mean=-0.000009 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.538717 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 93 components and 0.538717 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.348 mas, bmaj=16.99 mas, bpa=4.528 degrees ! Estimated noise=1908.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00512989 Jy ! Component: 100 - total flux cleaned = 0.00785549 Jy ! Component: 150 - total flux cleaned = 0.00942995 Jy ! Component: 200 - total flux cleaned = 0.00990433 Jy ! Total flux subtracted in 200 components = 0.00990433 Jy ! Clean residual min=-0.004664 max=0.004176 Jy/beam ! Clean residual mean=-0.000012 rms=0.001270 Jy/beam ! Combined flux in latest and established models = 0.548621 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247692 Jy ! Component: 100 - total flux cleaned = 0.000371335 Jy ! Component: 150 - total flux cleaned = 0.00042659 Jy ! Component: 200 - total flux cleaned = 0.000479144 Jy ! Total flux subtracted in 200 components = 0.000479144 Jy ! Clean residual min=-0.004569 max=0.004237 Jy/beam ! Clean residual mean=-0.000012 rms=0.001267 Jy/beam ! Combined flux in latest and established models = 0.5491 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 143 components and 0.5491 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=8.406 mas, bpa=-3.798 degrees ! Estimated noise=1539.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154277 Jy ! Component: 100 - total flux cleaned = -0.000216434 Jy ! Component: 150 - total flux cleaned = -0.000213882 Jy ! Component: 200 - total flux cleaned = -0.000214833 Jy ! Total flux subtracted in 200 components = -0.000214833 Jy ! Clean residual min=-0.004766 max=0.004497 Jy/beam ! Clean residual mean=-0.000008 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.548885 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 156 components and 0.548885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343580Jy sigma=0.000781 ! Fit after self-cal, rms=0.343561Jy sigma=0.000781 wmodel J1709-1728_S_2015_01_23_pus_map.mod ! Writing 156 model components to file: J1709-1728_S_2015_01_23_pus_map.mod wobs J1709-1728_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1709-1728_S_2015_01_23_pus_uvs.fits wwins J1709-1728_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J1709-1728_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106722 Jy ! Component: 100 - total flux cleaned = -0.0016896 Jy ! Component: 150 - total flux cleaned = -0.00183294 Jy ! Component: 200 - total flux cleaned = -0.00190249 Jy ! Component: 250 - total flux cleaned = -0.00196869 Jy ! Component: 300 - total flux cleaned = -0.00209571 Jy ! Component: 350 - total flux cleaned = -0.00221843 Jy ! Component: 400 - total flux cleaned = -0.00257813 Jy ! Component: 450 - total flux cleaned = -0.00292567 Jy ! Component: 500 - total flux cleaned = -0.00309614 Jy ! Component: 550 - total flux cleaned = -0.00354307 Jy ! Component: 600 - total flux cleaned = -0.00397917 Jy ! Component: 650 - total flux cleaned = -0.00435224 Jy ! Component: 700 - total flux cleaned = -0.00466675 Jy ! Component: 750 - total flux cleaned = -0.00502729 Jy ! Component: 800 - total flux cleaned = -0.0053298 Jy ! Component: 850 - total flux cleaned = -0.00537958 Jy ! Component: 900 - total flux cleaned = -0.0055755 Jy ! Component: 950 - total flux cleaned = -0.00567184 Jy ! Component: 1000 - total flux cleaned = -0.005672 Jy ! Component: 1050 - total flux cleaned = -0.00576615 Jy ! Component: 1100 - total flux cleaned = -0.00595156 Jy ! Component: 1150 - total flux cleaned = -0.0059513 Jy ! Component: 1200 - total flux cleaned = -0.00595102 Jy ! Component: 1250 - total flux cleaned = -0.00599577 Jy ! Component: 1300 - total flux cleaned = -0.00595162 Jy ! Component: 1350 - total flux cleaned = -0.00599578 Jy ! Component: 1400 - total flux cleaned = -0.00603925 Jy ! Component: 1450 - total flux cleaned = -0.0060394 Jy ! Component: 1500 - total flux cleaned = -0.00603935 Jy ! Component: 1550 - total flux cleaned = -0.00595525 Jy ! Component: 1600 - total flux cleaned = -0.00603843 Jy ! Component: 1650 - total flux cleaned = -0.00595591 Jy ! Component: 1700 - total flux cleaned = -0.00607742 Jy ! Component: 1750 - total flux cleaned = -0.00595597 Jy ! Component: 1800 - total flux cleaned = -0.00595671 Jy ! Component: 1850 - total flux cleaned = -0.00603651 Jy ! Component: 1900 - total flux cleaned = -0.00611511 Jy ! Component: 1950 - total flux cleaned = -0.00630961 Jy ! Component: 2000 - total flux cleaned = -0.00619337 Jy ! Component: 2050 - total flux cleaned = -0.00634641 Jy ! Component: 2100 - total flux cleaned = -0.00630813 Jy ! Component: 2150 - total flux cleaned = -0.00642143 Jy ! Component: 2200 - total flux cleaned = -0.00649613 Jy ! Component: 2250 - total flux cleaned = -0.00649606 Jy ! Component: 2300 - total flux cleaned = -0.00653304 Jy ! Component: 2350 - total flux cleaned = -0.00660566 Jy ! Component: 2400 - total flux cleaned = -0.00664188 Jy ! Component: 2450 - total flux cleaned = -0.00671375 Jy ! Component: 2500 - total flux cleaned = -0.00674952 Jy ! Component: 2550 - total flux cleaned = -0.00696251 Jy ! Component: 2600 - total flux cleaned = -0.00706788 Jy ! Component: 2650 - total flux cleaned = -0.00724245 Jy ! Component: 2700 - total flux cleaned = -0.00727669 Jy ! Component: 2750 - total flux cleaned = -0.00741437 Jy ! Component: 2800 - total flux cleaned = -0.00738014 Jy ! Component: 2850 - total flux cleaned = -0.00772019 Jy ! Component: 2900 - total flux cleaned = -0.00768649 Jy ! Component: 2950 - total flux cleaned = -0.00788832 Jy ! Component: 3000 - total flux cleaned = -0.00802174 Jy ! Component: 3050 - total flux cleaned = -0.00802173 Jy ! Component: 3100 - total flux cleaned = -0.00808795 Jy ! Component: 3150 - total flux cleaned = -0.00815365 Jy ! Component: 3200 - total flux cleaned = -0.00838155 Jy ! Component: 3250 - total flux cleaned = -0.0083491 Jy ! Component: 3300 - total flux cleaned = -0.00844608 Jy ! Component: 3350 - total flux cleaned = -0.00867039 Jy ! Component: 3400 - total flux cleaned = -0.00876574 Jy ! Component: 3450 - total flux cleaned = -0.00882898 Jy ! Component: 3500 - total flux cleaned = -0.0089234 Jy ! Component: 3550 - total flux cleaned = -0.00882934 Jy ! Component: 3600 - total flux cleaned = -0.00895428 Jy ! Component: 3650 - total flux cleaned = -0.00901629 Jy ! Component: 3700 - total flux cleaned = -0.00910876 Jy ! Component: 3750 - total flux cleaned = -0.00910911 Jy ! Component: 3800 - total flux cleaned = -0.00929216 Jy ! Component: 3850 - total flux cleaned = -0.00938324 Jy ! Component: 3900 - total flux cleaned = -0.00947388 Jy ! Component: 3950 - total flux cleaned = -0.00956451 Jy ! Component: 4000 - total flux cleaned = -0.00968423 Jy ! Component: 4050 - total flux cleaned = -0.00986284 Jy ! Total flux subtracted in 4096 components = -0.00983317 Jy ! Clean residual min=-0.001641 max=0.001572 Jy/beam ! Clean residual mean=-0.000005 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.539052 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 429 components and 0.539052 Jy ![Exited script file: muppet] wmap "J1709-1728_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.312 x 8.406 at -3.798 degrees (North through East) ! Clean map min=-0.0054218 max=0.45985 Jy/beam ! Writing clean map to FITS file: J1709-1728_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.459854 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000557013 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.363384 0.363384 0.726769 1.45354 2.90708 5.81415 11.6283 23.2566 46.5132 93.0264 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.459 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.312 x 8.406 at -3.798 degrees (North through East) ! Clean map min=-0.0054218 max=0.45985 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1709-1728_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:30:55 2017