! Started logfile: J1707-1415_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:32:50 2017 obs J1707-1415_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1707-1415_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J1707-1415 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1707-1415_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.783634Jy sigma=0.009421 ! Fit after self-cal, rms=0.763638Jy sigma=0.009213 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.398 mas, bmaj=5.816 mas, bpa=1.495 degrees ! Estimated noise=1084.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.175118 Jy ! Component: 100 - total flux cleaned = 0.217976 Jy ! Total flux subtracted in 100 components = 0.217976 Jy ! Clean residual min=-0.011141 max=0.018182 Jy/beam ! Clean residual mean=-0.000017 rms=0.003094 Jy/beam ! Combined flux in latest and established models = 0.217976 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.217976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133566Jy sigma=0.001145 ! Fit after self-cal, rms=0.133586Jy sigma=0.001145 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=6.588 mas, bpa=0.747 degrees ! Estimated noise=786.691 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0291514 Jy ! Component: 100 - total flux cleaned = 0.0428549 Jy ! Component: 150 - total flux cleaned = 0.0498045 Jy ! Component: 200 - total flux cleaned = 0.0535189 Jy ! Total flux subtracted in 200 components = 0.0535189 Jy ! Clean residual min=-0.006063 max=0.010075 Jy/beam ! Clean residual mean=0.000006 rms=0.002020 Jy/beam ! Combined flux in latest and established models = 0.271494 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 33 components and 0.271494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124834Jy sigma=0.001091 ! Fit after self-cal, rms=0.124861Jy sigma=0.001091 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* KP 1.00* LA 1.03 ! MK 0.99 NL 1.01 OV 0.98 PT 1.01 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 1.00* KP 1.00* LA 0.99 ! MK 1.01 NL 1.05 OV 1.00 PT 0.99 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* KP 1.00* LA 0.83 ! MK 1.01 NL 1.00 OV 0.93 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* KP 1.00* LA 0.89 ! MK 1.00 NL 1.10 OV 0.99 PT 0.98 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.124861Jy sigma=0.001091 ! Fit after self-cal, rms=0.108142Jy sigma=0.001005 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=6.647 mas, bpa=0.6306 degrees ! Estimated noise=797.688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380493 Jy ! Component: 100 - total flux cleaned = 0.00421071 Jy ! Component: 150 - total flux cleaned = 0.00402746 Jy ! Component: 200 - total flux cleaned = 0.00385943 Jy ! Total flux subtracted in 200 components = 0.00385943 Jy ! Clean residual min=-0.008555 max=0.007267 Jy/beam ! Clean residual mean=0.000002 rms=0.002005 Jy/beam ! Combined flux in latest and established models = 0.275354 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.275354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107778Jy sigma=0.001005 ! Fit after self-cal, rms=0.107525Jy sigma=0.001005 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107525Jy sigma=0.001005 ! Fit after self-cal, rms=0.092961Jy sigma=0.000945 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=6.637 mas, bpa=0.4735 degrees ! Estimated noise=803.922 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225686 Jy ! Component: 100 - total flux cleaned = 0.00252852 Jy ! Component: 150 - total flux cleaned = 0.0025637 Jy ! Component: 200 - total flux cleaned = 0.00256297 Jy ! Total flux subtracted in 200 components = 0.00256297 Jy ! Clean residual min=-0.004018 max=0.003781 Jy/beam ! Clean residual mean=-0.000003 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.277917 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.277917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092862Jy sigma=0.000944 ! Fit after self-cal, rms=0.092813Jy sigma=0.000944 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.61255e-05 Jy ! Component: 100 - total flux cleaned = -3.45284e-05 Jy ! Component: 150 - total flux cleaned = -8.90924e-05 Jy ! Component: 200 - total flux cleaned = -0.000114673 Jy ! Total flux subtracted in 200 components = -0.000114673 Jy ! Clean residual min=-0.004076 max=0.003706 Jy/beam ! Clean residual mean=-0.000003 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.277802 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.277802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092790Jy sigma=0.000944 ! Fit after self-cal, rms=0.092790Jy sigma=0.000944 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092790Jy sigma=0.000944 ! Fit after self-cal, rms=0.091671Jy sigma=0.000941 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.966 mas, bmaj=6.636 mas, bpa=0.4498 degrees ! Estimated noise=807.548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105249 Jy ! Component: 100 - total flux cleaned = 0.0011006 Jy ! Component: 150 - total flux cleaned = 0.00112048 Jy ! Component: 200 - total flux cleaned = 0.001138 Jy ! Total flux subtracted in 200 components = 0.001138 Jy ! Clean residual min=-0.003171 max=0.003541 Jy/beam ! Clean residual mean=-0.000003 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.27894 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.27894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091637Jy sigma=0.000941 ! Fit after self-cal, rms=0.091655Jy sigma=0.000941 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.66343e-05 Jy ! Component: 100 - total flux cleaned = -9.19308e-06 Jy ! Component: 150 - total flux cleaned = -4.08476e-05 Jy ! Component: 200 - total flux cleaned = -4.09673e-05 Jy ! Total flux subtracted in 200 components = -4.09673e-05 Jy ! Clean residual min=-0.003198 max=0.003511 Jy/beam ! Clean residual mean=-0.000003 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.278899 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.278899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091646Jy sigma=0.000941 ! Fit after self-cal, rms=0.091645Jy sigma=0.000941 ! Inverting map ! Added new window around map position (-10, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324969 Jy ! Component: 100 - total flux cleaned = 0.00435431 Jy ! Component: 150 - total flux cleaned = 0.00459128 Jy ! Component: 200 - total flux cleaned = 0.00469108 Jy ! Total flux subtracted in 200 components = 0.00469108 Jy ! Clean residual min=-0.002904 max=0.002763 Jy/beam ! Clean residual mean=-0.000003 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.28359 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.28359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091527Jy sigma=0.000940 ! Fit after self-cal, rms=0.091503Jy sigma=0.000940 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091503Jy sigma=0.000940 ! Fit after self-cal, rms=0.091806Jy sigma=0.000940 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.535 mas, bmaj=14.92 mas, bpa=8.86 degrees ! Estimated noise=1005.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104973 Jy ! Component: 100 - total flux cleaned = 0.00112129 Jy ! Component: 150 - total flux cleaned = 0.00118517 Jy ! Component: 200 - total flux cleaned = 0.00123885 Jy ! Total flux subtracted in 200 components = 0.00123885 Jy ! Clean residual min=-0.003066 max=0.002991 Jy/beam ! Clean residual mean=-0.000006 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.284829 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 83 components and 0.284829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091784Jy sigma=0.000940 ! Fit after self-cal, rms=0.091772Jy sigma=0.000940 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174561 Jy ! Component: 100 - total flux cleaned = 0.000199026 Jy ! Component: 150 - total flux cleaned = 0.000155787 Jy ! Component: 200 - total flux cleaned = 9.52078e-05 Jy ! Total flux subtracted in 200 components = 9.52078e-05 Jy ! Clean residual min=-0.002940 max=0.002880 Jy/beam ! Clean residual mean=-0.000006 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.284924 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 87 components and 0.284924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091778Jy sigma=0.000940 ! Fit after self-cal, rms=0.091777Jy sigma=0.000940 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=6.633 mas, bpa=0.3402 degrees ! Estimated noise=810.223 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.963 x 6.633 at 0.3402 degrees (North through East) ! Clean map min=-0.0027283 max=0.24263 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.385 mas, bmaj=5.798 mas, bpa=1.211 degrees ! Estimated noise=1128.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.182163 Jy ! Component: 100 - total flux cleaned = 0.228153 Jy ! Component: 150 - total flux cleaned = 0.250022 Jy ! Component: 200 - total flux cleaned = 0.262231 Jy ! Total flux subtracted in 200 components = 0.262231 Jy ! Clean residual min=-0.005684 max=0.007110 Jy/beam ! Clean residual mean=-0.000011 rms=0.001419 Jy/beam ! Combined flux in latest and established models = 0.262231 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.262231 Jy ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=6.633 mas, bpa=0.3402 degrees ! Estimated noise=810.223 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00995642 Jy ! Component: 100 - total flux cleaned = 0.0153775 Jy ! Component: 150 - total flux cleaned = 0.0186778 Jy ! Component: 200 - total flux cleaned = 0.0209389 Jy ! Total flux subtracted in 200 components = 0.0209389 Jy ! Clean residual min=-0.003155 max=0.002763 Jy/beam ! Clean residual mean=-0.000005 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.28317 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 43 components and 0.28317 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.535 mas, bmaj=14.92 mas, bpa=8.86 degrees ! Estimated noise=1005.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202678 Jy ! Component: 100 - total flux cleaned = 0.00227928 Jy ! Component: 150 - total flux cleaned = 0.00228029 Jy ! Component: 200 - total flux cleaned = 0.00234364 Jy ! Total flux subtracted in 200 components = 0.00234364 Jy ! Clean residual min=-0.003205 max=0.002986 Jy/beam ! Clean residual mean=-0.000007 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.285514 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.93295e-05 Jy ! Component: 100 - total flux cleaned = 7.97826e-05 Jy ! Component: 150 - total flux cleaned = 0.000102872 Jy ! Component: 200 - total flux cleaned = 8.21544e-05 Jy ! Total flux subtracted in 200 components = 8.21544e-05 Jy ! Clean residual min=-0.003086 max=0.002902 Jy/beam ! Clean residual mean=-0.000007 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.285596 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 81 components and 0.285596 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=6.633 mas, bpa=0.3402 degrees ! Estimated noise=810.223 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000446247 Jy ! Component: 100 - total flux cleaned = 0.000593924 Jy ! Component: 150 - total flux cleaned = 0.000632202 Jy ! Component: 200 - total flux cleaned = 0.000666286 Jy ! Total flux subtracted in 200 components = 0.000666286 Jy ! Clean residual min=-0.002797 max=0.002664 Jy/beam ! Clean residual mean=-0.000004 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.286263 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 96 components and 0.286263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091772Jy sigma=0.000940 ! Fit after self-cal, rms=0.091768Jy sigma=0.000940 wmodel J1707-1415_S_2014_01_04_pus_map.mod ! Writing 96 model components to file: J1707-1415_S_2014_01_04_pus_map.mod wobs J1707-1415_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1707-1415_S_2014_01_04_pus_uvs.fits wwins J1707-1415_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1707-1415_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0004837 Jy ! Component: 100 - total flux cleaned = -0.00062423 Jy ! Component: 150 - total flux cleaned = -0.000799565 Jy ! Component: 200 - total flux cleaned = -0.000839986 Jy ! Component: 250 - total flux cleaned = -0.000879134 Jy ! Component: 300 - total flux cleaned = -0.000878239 Jy ! Component: 350 - total flux cleaned = -0.000951617 Jy ! Component: 400 - total flux cleaned = -0.00109445 Jy ! Component: 450 - total flux cleaned = -0.00109478 Jy ! Component: 500 - total flux cleaned = -0.00122942 Jy ! Component: 550 - total flux cleaned = -0.00119697 Jy ! Component: 600 - total flux cleaned = -0.00122829 Jy ! Component: 650 - total flux cleaned = -0.00116691 Jy ! Component: 700 - total flux cleaned = -0.00116783 Jy ! Component: 750 - total flux cleaned = -0.00116772 Jy ! Component: 800 - total flux cleaned = -0.000996985 Jy ! Component: 850 - total flux cleaned = -0.000968974 Jy ! Component: 900 - total flux cleaned = -0.000777928 Jy ! Component: 950 - total flux cleaned = -0.000671643 Jy ! Component: 1000 - total flux cleaned = -0.000464401 Jy ! Component: 1050 - total flux cleaned = -0.000464774 Jy ! Component: 1100 - total flux cleaned = -0.000465052 Jy ! Component: 1150 - total flux cleaned = -0.000464837 Jy ! Component: 1200 - total flux cleaned = -0.00048926 Jy ! Component: 1250 - total flux cleaned = -0.000488769 Jy ! Component: 1300 - total flux cleaned = -0.000442755 Jy ! Component: 1350 - total flux cleaned = -0.000442744 Jy ! Component: 1400 - total flux cleaned = -0.000375412 Jy ! Component: 1450 - total flux cleaned = -0.000331527 Jy ! Component: 1500 - total flux cleaned = -0.00028799 Jy ! Component: 1550 - total flux cleaned = -0.000224555 Jy ! Component: 1600 - total flux cleaned = -0.000182556 Jy ! Component: 1650 - total flux cleaned = -0.000120665 Jy ! Component: 1700 - total flux cleaned = -0.000120947 Jy ! Component: 1750 - total flux cleaned = -6.05646e-05 Jy ! Component: 1800 - total flux cleaned = -8.07125e-05 Jy ! Component: 1850 - total flux cleaned = -2.38508e-06 Jy ! Component: 1900 - total flux cleaned = 5.52583e-05 Jy ! Component: 1950 - total flux cleaned = 7.47092e-05 Jy ! Component: 2000 - total flux cleaned = 0.000149925 Jy ! Component: 2050 - total flux cleaned = 0.000186724 Jy ! Component: 2100 - total flux cleaned = 0.000150007 Jy ! Component: 2150 - total flux cleaned = 0.000258488 Jy ! Component: 2200 - total flux cleaned = 0.000275962 Jy ! Component: 2250 - total flux cleaned = 0.00024063 Jy ! Component: 2300 - total flux cleaned = 0.00018815 Jy ! Component: 2350 - total flux cleaned = 0.000188124 Jy ! Component: 2400 - total flux cleaned = 0.000205423 Jy ! Component: 2450 - total flux cleaned = 0.00022249 Jy ! Component: 2500 - total flux cleaned = 0.000189019 Jy ! Component: 2550 - total flux cleaned = 0.000238911 Jy ! Component: 2600 - total flux cleaned = 0.000238942 Jy ! Component: 2650 - total flux cleaned = 0.000271285 Jy ! Component: 2700 - total flux cleaned = 0.000303307 Jy ! Component: 2750 - total flux cleaned = 0.000319277 Jy ! Component: 2800 - total flux cleaned = 0.000366414 Jy ! Component: 2850 - total flux cleaned = 0.000335194 Jy ! Component: 2900 - total flux cleaned = 0.000381722 Jy ! Component: 2950 - total flux cleaned = 0.00039692 Jy ! Component: 3000 - total flux cleaned = 0.000427071 Jy ! Component: 3050 - total flux cleaned = 0.000426797 Jy ! Component: 3100 - total flux cleaned = 0.000411847 Jy ! Component: 3150 - total flux cleaned = 0.000441666 Jy ! Component: 3200 - total flux cleaned = 0.000485846 Jy ! Component: 3250 - total flux cleaned = 0.000500409 Jy ! Component: 3300 - total flux cleaned = 0.000558425 Jy ! Component: 3350 - total flux cleaned = 0.000558243 Jy ! Component: 3400 - total flux cleaned = 0.000601128 Jy ! Component: 3450 - total flux cleaned = 0.000601083 Jy ! Component: 3500 - total flux cleaned = 0.000615199 Jy ! Component: 3550 - total flux cleaned = 0.000657286 Jy ! Component: 3600 - total flux cleaned = 0.000657271 Jy ! Component: 3650 - total flux cleaned = 0.000740667 Jy ! Component: 3700 - total flux cleaned = 0.000782143 Jy ! Component: 3750 - total flux cleaned = 0.000795837 Jy ! Component: 3800 - total flux cleaned = 0.000823123 Jy ! Component: 3850 - total flux cleaned = 0.000850295 Jy ! Component: 3900 - total flux cleaned = 0.000890831 Jy ! Component: 3950 - total flux cleaned = 0.000917756 Jy ! Component: 4000 - total flux cleaned = 0.000984647 Jy ! Component: 4050 - total flux cleaned = 0.000971356 Jy ! Total flux subtracted in 4096 components = 0.00099789 Jy ! Clean residual min=-0.000769 max=0.001135 Jy/beam ! Clean residual mean=-0.000000 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.28726 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 342 components and 0.28726 Jy ![Exited script file: muppet] wmap "J1707-1415_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.963 x 6.633 at 0.3402 degrees (North through East) ! Clean map min=-0.0015099 max=0.24242 Jy/beam ! Writing clean map to FITS file: J1707-1415_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.242425 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000218295 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.270139 0.270139 0.540278 1.08056 2.16111 4.32222 8.64444 17.2889 34.5778 69.1555 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.242 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.963 x 6.633 at 0.3402 degrees (North through East) ! Clean map min=-0.0015099 max=0.24242 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1707-1415_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:32:55 2017