! Started logfile: J1700-2610_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:04:41 2016 obs J1700-2610_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1700-2610_S_2015_03_17_pus_uva.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.823755 visibilities/baseline/integration-bin. ! Found source: J1700-2610 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 4300 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1700-2610_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.849380Jy sigma=0.007485 ! Fit after self-cal, rms=0.818691Jy sigma=0.007177 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.341 mas, bmaj=6.429 mas, bpa=-4.14 degrees ! Estimated noise=1524.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.954614 Jy ! Component: 100 - total flux cleaned = 1.35838 Jy ! Total flux subtracted in 100 components = 1.35838 Jy ! Clean residual min=-0.055732 max=0.192944 Jy/beam ! Clean residual mean=-0.000424 rms=0.023021 Jy/beam ! Combined flux in latest and established models = 1.35838 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 1.35838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.562461Jy sigma=0.004734 ! Fit after self-cal, rms=0.562291Jy sigma=0.004733 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.229577 Jy ! Component: 100 - total flux cleaned = 0.374896 Jy ! Total flux subtracted in 100 components = 0.374896 Jy ! Clean residual min=-0.041182 max=0.099843 Jy/beam ! Clean residual mean=-0.000238 rms=0.013560 Jy/beam ! Combined flux in latest and established models = 1.73327 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 51 components and 1.73327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360929Jy sigma=0.002827 ! Fit after self-cal, rms=0.360840Jy sigma=0.002826 ! Inverting map ! Added new window around map position (3.5, -1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108511 Jy ! Component: 100 - total flux cleaned = 0.183381 Jy ! Total flux subtracted in 100 components = 0.183381 Jy ! Clean residual min=-0.043468 max=0.063847 Jy/beam ! Clean residual mean=-0.000147 rms=0.010352 Jy/beam ! Combined flux in latest and established models = 1.91666 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 77 components and 1.91666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291750Jy sigma=0.002224 ! Fit after self-cal, rms=0.290947Jy sigma=0.002215 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.943 mas, bmaj=7.578 mas, bpa=-4.288 degrees ! Estimated noise=1177.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0889076 Jy ! Component: 100 - total flux cleaned = 0.141246 Jy ! Component: 150 - total flux cleaned = 0.173394 Jy ! Component: 200 - total flux cleaned = 0.193517 Jy ! Total flux subtracted in 200 components = 0.193517 Jy ! Clean residual min=-0.056793 max=0.036768 Jy/beam ! Clean residual mean=-0.000149 rms=0.010817 Jy/beam ! Combined flux in latest and established models = 2.11017 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 96 components and 2.11017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250853Jy sigma=0.001987 ! Fit after self-cal, rms=0.250316Jy sigma=0.001981 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.86 HN 1.37 KP 1.12 ! LA 1.01 MK 1.00 NL 0.92 OV 1.01 ! PT 1.08 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.90 HN 1.50 KP 1.08 ! LA 0.97 MK 1.02 NL 1.02 OV 1.04 ! PT 1.06 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.91 HN 1.45 KP 0.96 ! LA 0.79 MK 1.03 NL 1.12 OV 0.95 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.92 HN 1.32 KP 0.92 ! LA 0.84 MK 1.00 NL 0.99 OV 1.00 ! PT 1.07 SC 0.89 ! ! ! Fit before self-cal, rms=0.250316Jy sigma=0.001981 ! Fit after self-cal, rms=0.111433Jy sigma=0.000900 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.961 mas, bmaj=7.569 mas, bpa=-4.106 degrees ! Estimated noise=1185.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00969945 Jy ! Component: 100 - total flux cleaned = -0.0120932 Jy ! Component: 150 - total flux cleaned = -0.0130909 Jy ! Component: 200 - total flux cleaned = -0.0139826 Jy ! Total flux subtracted in 200 components = -0.0139826 Jy ! Clean residual min=-0.015139 max=0.012446 Jy/beam ! Clean residual mean=-0.000043 rms=0.002907 Jy/beam ! Combined flux in latest and established models = 2.09619 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 102 components and 2.09619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108532Jy sigma=0.000876 ! Fit after self-cal, rms=0.108311Jy sigma=0.000874 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108311Jy sigma=0.000874 ! Fit after self-cal, rms=0.104509Jy sigma=0.000840 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.964 mas, bmaj=7.582 mas, bpa=-4.198 degrees ! Estimated noise=1184.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0067729 Jy ! Component: 100 - total flux cleaned = -0.00813813 Jy ! Component: 150 - total flux cleaned = -0.00886612 Jy ! Component: 200 - total flux cleaned = -0.0097706 Jy ! Total flux subtracted in 200 components = -0.0097706 Jy ! Clean residual min=-0.011800 max=0.008404 Jy/beam ! Clean residual mean=-0.000038 rms=0.002209 Jy/beam ! Combined flux in latest and established models = 2.08642 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 110 components and 2.08642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103033Jy sigma=0.000828 ! Fit after self-cal, rms=0.102875Jy sigma=0.000827 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00160037 Jy ! Component: 100 - total flux cleaned = -0.00238326 Jy ! Component: 150 - total flux cleaned = -0.0029283 Jy ! Component: 200 - total flux cleaned = -0.00359839 Jy ! Total flux subtracted in 200 components = -0.00359839 Jy ! Clean residual min=-0.011312 max=0.008441 Jy/beam ! Clean residual mean=-0.000043 rms=0.002133 Jy/beam ! Combined flux in latest and established models = 2.08282 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 112 components and 2.08282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102178Jy sigma=0.000821 ! Fit after self-cal, rms=0.102100Jy sigma=0.000821 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102100Jy sigma=0.000821 ! Fit after self-cal, rms=0.100398Jy sigma=0.000805 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.968 mas, bmaj=7.588 mas, bpa=-4.276 degrees ! Estimated noise=1185.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00504486 Jy ! Component: 100 - total flux cleaned = -0.00620807 Jy ! Component: 150 - total flux cleaned = -0.00672298 Jy ! Component: 200 - total flux cleaned = -0.00733966 Jy ! Total flux subtracted in 200 components = -0.00733966 Jy ! Clean residual min=-0.007669 max=0.006933 Jy/beam ! Clean residual mean=-0.000037 rms=0.001636 Jy/beam ! Combined flux in latest and established models = 2.07548 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 115 components and 2.07548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099546Jy sigma=0.000798 ! Fit after self-cal, rms=0.099451Jy sigma=0.000798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00161717 Jy ! Component: 100 - total flux cleaned = -0.00173265 Jy ! Component: 150 - total flux cleaned = -0.00210574 Jy ! Component: 200 - total flux cleaned = -0.00245661 Jy ! Total flux subtracted in 200 components = -0.00245661 Jy ! Clean residual min=-0.007046 max=0.007011 Jy/beam ! Clean residual mean=-0.000040 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 2.07302 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 118 components and 2.07302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099077Jy sigma=0.000794 ! Fit after self-cal, rms=0.099025Jy sigma=0.000794 ! Inverting map ! Added new window around map position (44.5, -54.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355241 Jy ! Component: 100 - total flux cleaned = 0.00250125 Jy ! Component: 150 - total flux cleaned = 0.00225047 Jy ! Component: 200 - total flux cleaned = 0.00214375 Jy ! Total flux subtracted in 200 components = 0.00214375 Jy ! Clean residual min=-0.006508 max=0.005776 Jy/beam ! Clean residual mean=-0.000042 rms=0.001488 Jy/beam ! Combined flux in latest and established models = 2.07517 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 130 components and 2.07517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098484Jy sigma=0.000790 ! Fit after self-cal, rms=0.098421Jy sigma=0.000789 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098421Jy sigma=0.000789 ! Fit after self-cal, rms=0.098544Jy sigma=0.000788 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.251 mas, bmaj=19.55 mas, bpa=1.314 degrees ! Estimated noise=1540.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00333684 Jy ! Component: 100 - total flux cleaned = -0.003388 Jy ! Component: 150 - total flux cleaned = -0.00359527 Jy ! Component: 200 - total flux cleaned = -0.0036412 Jy ! Total flux subtracted in 200 components = -0.0036412 Jy ! Clean residual min=-0.006357 max=0.006247 Jy/beam ! Clean residual mean=-0.000070 rms=0.001748 Jy/beam ! Combined flux in latest and established models = 2.07153 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 139 components and 2.07153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098414Jy sigma=0.000787 ! Fit after self-cal, rms=0.098377Jy sigma=0.000787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102063 Jy ! Component: 100 - total flux cleaned = -0.00088259 Jy ! Component: 150 - total flux cleaned = -0.000839298 Jy ! Component: 200 - total flux cleaned = -0.000759168 Jy ! Total flux subtracted in 200 components = -0.000759168 Jy ! Clean residual min=-0.006344 max=0.006235 Jy/beam ! Clean residual mean=-0.000072 rms=0.001726 Jy/beam ! Combined flux in latest and established models = 2.07077 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 142 components and 2.07077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098331Jy sigma=0.000787 ! Fit after self-cal, rms=0.098318Jy sigma=0.000787 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=7.589 mas, bpa=-4.292 degrees ! Estimated noise=1185.68 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.97 x 7.589 at -4.292 degrees (North through East) ! Clean map min=-0.0062049 max=1.3016 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098318Jy sigma=0.000787 ! Fit after self-cal, rms=0.093447Jy sigma=0.000736 ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.591 mas, bpa=-4.26 degrees ! Estimated noise=1185.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00310928 Jy ! Component: 100 - total flux cleaned = -0.00355267 Jy ! Component: 150 - total flux cleaned = -0.0038611 Jy ! Component: 200 - total flux cleaned = -0.00405391 Jy ! Total flux subtracted in 200 components = -0.00405391 Jy ! Clean residual min=-0.006070 max=0.004938 Jy/beam ! Clean residual mean=-0.000032 rms=0.001338 Jy/beam ! Combined flux in latest and established models = 2.06671 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 146 components and 2.06671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093131Jy sigma=0.000734 ! Fit after self-cal, rms=0.093104Jy sigma=0.000734 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000902848 Jy ! Component: 100 - total flux cleaned = -0.000902437 Jy ! Component: 150 - total flux cleaned = -0.00106821 Jy ! Component: 200 - total flux cleaned = -0.00114625 Jy ! Total flux subtracted in 200 components = -0.00114625 Jy ! Clean residual min=-0.005822 max=0.004795 Jy/beam ! Clean residual mean=-0.000033 rms=0.001311 Jy/beam ! Combined flux in latest and established models = 2.06557 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 150 components and 2.06557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092929Jy sigma=0.000732 ! Fit after self-cal, rms=0.092914Jy sigma=0.000732 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092914Jy sigma=0.000732 ! Fit after self-cal, rms=0.093000Jy sigma=0.000732 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.353 mas, bmaj=6.393 mas, bpa=-4.059 degrees ! Estimated noise=1541.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.963678 Jy ! Component: 100 - total flux cleaned = 1.3679 Jy ! Component: 150 - total flux cleaned = 1.59802 Jy ! Component: 200 - total flux cleaned = 1.74241 Jy ! Total flux subtracted in 200 components = 1.74241 Jy ! Clean residual min=-0.022652 max=0.077381 Jy/beam ! Clean residual mean=-0.000183 rms=0.009238 Jy/beam ! Combined flux in latest and established models = 1.74241 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 1.74241 Jy ! Inverting map and beam ! Estimated beam: bmin=2.974 mas, bmaj=7.592 mas, bpa=-4.272 degrees ! Estimated noise=1185.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143153 Jy ! Component: 100 - total flux cleaned = 0.216257 Jy ! Component: 150 - total flux cleaned = 0.256335 Jy ! Component: 200 - total flux cleaned = 0.278761 Jy ! Total flux subtracted in 200 components = 0.278761 Jy ! Clean residual min=-0.008503 max=0.017616 Jy/beam ! Clean residual mean=-0.000078 rms=0.002153 Jy/beam ! Combined flux in latest and established models = 2.02117 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 93 components and 2.02117 Jy ! Inverting map ! Added new window around map position (-3.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160734 Jy ! Component: 100 - total flux cleaned = 0.025196 Jy ! Component: 150 - total flux cleaned = 0.0305713 Jy ! Component: 200 - total flux cleaned = 0.0321696 Jy ! Total flux subtracted in 200 components = 0.0321696 Jy ! Clean residual min=-0.006963 max=0.005337 Jy/beam ! Clean residual mean=-0.000042 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 2.05334 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 110 components and 2.05334 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.261 mas, bmaj=19.57 mas, bpa=1.313 degrees ! Estimated noise=1537.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321044 Jy ! Component: 100 - total flux cleaned = 0.00448736 Jy ! Component: 150 - total flux cleaned = 0.00544369 Jy ! Component: 200 - total flux cleaned = 0.0062276 Jy ! Total flux subtracted in 200 components = 0.0062276 Jy ! Clean residual min=-0.005700 max=0.006207 Jy/beam ! Clean residual mean=-0.000072 rms=0.001545 Jy/beam ! Combined flux in latest and established models = 2.05957 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000334867 Jy ! Component: 100 - total flux cleaned = 0.000533138 Jy ! Component: 150 - total flux cleaned = 0.000582853 Jy ! Component: 200 - total flux cleaned = 0.000671517 Jy ! Total flux subtracted in 200 components = 0.000671517 Jy ! Clean residual min=-0.005690 max=0.006204 Jy/beam ! Clean residual mean=-0.000070 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 2.06024 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 135 components and 2.06024 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.974 mas, bmaj=7.592 mas, bpa=-4.272 degrees ! Estimated noise=1185.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000670742 Jy ! Component: 100 - total flux cleaned = -0.000797109 Jy ! Component: 150 - total flux cleaned = -0.000690289 Jy ! Component: 200 - total flux cleaned = -0.00069158 Jy ! Total flux subtracted in 200 components = -0.00069158 Jy ! Clean residual min=-0.006161 max=0.004843 Jy/beam ! Clean residual mean=-0.000035 rms=0.001247 Jy/beam ! Combined flux in latest and established models = 2.05955 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 147 components and 2.05955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092401Jy sigma=0.000729 ! Fit after self-cal, rms=0.092358Jy sigma=0.000729 wmodel J1700-2610_S_2015_03_17_pus_map.mod ! Writing 147 model components to file: J1700-2610_S_2015_03_17_pus_map.mod wobs J1700-2610_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1700-2610_S_2015_03_17_pus_uvs.fits wwins J1700-2610_S_2015_03_17_pus_map.win ! wwins: Wrote 4 windows to J1700-2610_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00255964 Jy ! Component: 100 - total flux cleaned = -0.00391183 Jy ! Component: 150 - total flux cleaned = -0.0047531 Jy ! Component: 200 - total flux cleaned = -0.00555355 Jy ! Component: 250 - total flux cleaned = -0.00624327 Jy ! Component: 300 - total flux cleaned = -0.00712688 Jy ! Component: 350 - total flux cleaned = -0.00798692 Jy ! Component: 400 - total flux cleaned = -0.0086178 Jy ! Component: 450 - total flux cleaned = -0.00950725 Jy ! Component: 500 - total flux cleaned = -0.0101745 Jy ! Component: 550 - total flux cleaned = -0.0108266 Jy ! Component: 600 - total flux cleaned = -0.0114026 Jy ! Component: 650 - total flux cleaned = -0.0120926 Jy ! Component: 700 - total flux cleaned = -0.0127084 Jy ! Component: 750 - total flux cleaned = -0.0133717 Jy ! Component: 800 - total flux cleaned = -0.0140221 Jy ! Component: 850 - total flux cleaned = -0.0146036 Jy ! Component: 900 - total flux cleaned = -0.0154022 Jy ! Component: 950 - total flux cleaned = -0.0161297 Jy ! Component: 1000 - total flux cleaned = -0.0165719 Jy ! Component: 1050 - total flux cleaned = -0.0173323 Jy ! Component: 1100 - total flux cleaned = -0.0180798 Jy ! Component: 1150 - total flux cleaned = -0.0189193 Jy ! Component: 1200 - total flux cleaned = -0.0194873 Jy ! Component: 1250 - total flux cleaned = -0.0199961 Jy ! Component: 1300 - total flux cleaned = -0.0205974 Jy ! Component: 1350 - total flux cleaned = -0.0211415 Jy ! Component: 1400 - total flux cleaned = -0.0215316 Jy ! Component: 1450 - total flux cleaned = -0.0220127 Jy ! Component: 1500 - total flux cleaned = -0.022631 Jy ! Component: 1550 - total flux cleaned = -0.0231465 Jy ! Component: 1600 - total flux cleaned = -0.0235171 Jy ! Component: 1650 - total flux cleaned = -0.0239286 Jy ! Component: 1700 - total flux cleaned = -0.0245146 Jy ! Component: 1750 - total flux cleaned = -0.0249605 Jy ! Component: 1800 - total flux cleaned = -0.0253573 Jy ! Component: 1850 - total flux cleaned = -0.0259238 Jy ! Component: 1900 - total flux cleaned = -0.0263105 Jy ! Component: 1950 - total flux cleaned = -0.0267786 Jy ! Component: 2000 - total flux cleaned = -0.0271147 Jy ! Component: 2050 - total flux cleaned = -0.0276557 Jy ! Component: 2100 - total flux cleaned = -0.0278613 Jy ! Component: 2150 - total flux cleaned = -0.0282283 Jy ! Component: 2200 - total flux cleaned = -0.0287115 Jy ! Component: 2250 - total flux cleaned = -0.0289901 Jy ! Component: 2300 - total flux cleaned = -0.0293844 Jy ! Component: 2350 - total flux cleaned = -0.029696 Jy ! Component: 2400 - total flux cleaned = -0.0301209 Jy ! Component: 2450 - total flux cleaned = -0.0304265 Jy ! Component: 2500 - total flux cleaned = -0.030843 Jy ! Component: 2550 - total flux cleaned = -0.0313302 Jy ! Component: 2600 - total flux cleaned = -0.0315899 Jy ! Component: 2650 - total flux cleaned = -0.0320673 Jy ! Component: 2700 - total flux cleaned = -0.0323942 Jy ! Component: 2750 - total flux cleaned = -0.0327908 Jy ! Component: 2800 - total flux cleaned = -0.0331117 Jy ! Component: 2850 - total flux cleaned = -0.0335006 Jy ! Component: 2900 - total flux cleaned = -0.0337455 Jy ! Component: 2950 - total flux cleaned = -0.0340584 Jy ! Component: 3000 - total flux cleaned = -0.0344027 Jy ! Component: 3050 - total flux cleaned = -0.0345396 Jy ! Component: 3100 - total flux cleaned = -0.0348779 Jy ! Component: 3150 - total flux cleaned = -0.0352129 Jy ! Component: 3200 - total flux cleaned = -0.0355116 Jy ! Component: 3250 - total flux cleaned = -0.0358082 Jy ! Component: 3300 - total flux cleaned = -0.0360692 Jy ! Component: 3350 - total flux cleaned = -0.0362634 Jy ! Component: 3400 - total flux cleaned = -0.0364885 Jy ! Component: 3450 - total flux cleaned = -0.0367432 Jy ! Component: 3500 - total flux cleaned = -0.0369643 Jy ! Component: 3550 - total flux cleaned = -0.0371215 Jy ! Component: 3600 - total flux cleaned = -0.0372149 Jy ! Component: 3650 - total flux cleaned = -0.0374929 Jy ! Component: 3700 - total flux cleaned = -0.0376463 Jy ! Component: 3750 - total flux cleaned = -0.0378286 Jy ! Component: 3800 - total flux cleaned = -0.037889 Jy ! Component: 3850 - total flux cleaned = -0.0381892 Jy ! Component: 3900 - total flux cleaned = -0.0381893 Jy ! Component: 3950 - total flux cleaned = -0.0384557 Jy ! Component: 4000 - total flux cleaned = -0.0385733 Jy ! Component: 4050 - total flux cleaned = -0.0387487 Jy ! Total flux subtracted in 4096 components = -0.0389807 Jy ! Clean residual min=-0.001888 max=0.001733 Jy/beam ! Clean residual mean=-0.000010 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 2.02057 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 424 components and 2.02057 Jy ![Exited script file: muppet] wmap "J1700-2610_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.974 x 7.592 at -4.272 degrees (North through East) ! Clean map min=-0.005343 max=1.3314 Jy/beam ! Writing clean map to FITS file: J1700-2610_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.33142 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000523053 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.117856 0.117856 0.235711 0.471423 0.942845 1.88569 3.77138 7.54276 15.0855 30.1711 60.3421 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.331 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.974 x 7.592 at -4.272 degrees (North through East) ! Clean map min=-0.005343 max=1.3314 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1700-2610_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:04:46 2016