! Started logfile: J1657+4808_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:32:31 2017 obs J1657+4808_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1657+4808_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.375 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1657+4808 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4104 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1657+4808_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.713402Jy sigma=0.011234 ! Fit after self-cal, rms=0.697209Jy sigma=0.010928 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=9.152 mas, bpa=32.75 degrees ! Estimated noise=1101.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.229952 Jy ! Component: 100 - total flux cleaned = 0.286549 Jy ! Total flux subtracted in 100 components = 0.286549 Jy ! Clean residual min=-0.017529 max=0.026492 Jy/beam ! Clean residual mean=-0.000066 rms=0.005977 Jy/beam ! Combined flux in latest and established models = 0.286549 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.286549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101533Jy sigma=0.001404 ! Fit after self-cal, rms=0.101278Jy sigma=0.001402 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.537 mas, bmaj=9.548 mas, bpa=33.55 degrees ! Estimated noise=744.903 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0380911 Jy ! Component: 100 - total flux cleaned = 0.059404 Jy ! Component: 150 - total flux cleaned = 0.0734561 Jy ! Component: 200 - total flux cleaned = 0.0833709 Jy ! Total flux subtracted in 200 components = 0.0833709 Jy ! Clean residual min=-0.015955 max=0.021148 Jy/beam ! Clean residual mean=-0.000123 rms=0.005155 Jy/beam ! Combined flux in latest and established models = 0.369919 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 40 components and 0.36992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082672Jy sigma=0.001171 ! Fit after self-cal, rms=0.082574Jy sigma=0.001169 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 0.97 ! MK 0.98 NL 1.02 OV 0.98 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 0.95 ! MK 0.96 NL 1.07 OV 1.02 PT 0.90 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* KP 1.00* LA 0.79 ! MK 1.00 NL 1.03 OV 0.94 PT 0.87 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* KP 1.00* LA 0.84 ! MK 0.99 NL 1.12 OV 1.01 PT 0.93 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.082574Jy sigma=0.001169 ! Fit after self-cal, rms=0.068736Jy sigma=0.000991 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=9.768 mas, bpa=33.36 degrees ! Estimated noise=735.161 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00658671 Jy ! Component: 100 - total flux cleaned = -0.00861082 Jy ! Component: 150 - total flux cleaned = -0.0103465 Jy ! Component: 200 - total flux cleaned = -0.0114529 Jy ! Total flux subtracted in 200 components = -0.0114529 Jy ! Clean residual min=-0.009582 max=0.011889 Jy/beam ! Clean residual mean=-0.000065 rms=0.003004 Jy/beam ! Combined flux in latest and established models = 0.358467 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.358467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067788Jy sigma=0.000979 ! Fit after self-cal, rms=0.067585Jy sigma=0.000978 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067585Jy sigma=0.000978 ! Fit after self-cal, rms=0.066560Jy sigma=0.000957 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.523 mas, bmaj=9.737 mas, bpa=33.41 degrees ! Estimated noise=733.693 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161284 Jy ! Component: 100 - total flux cleaned = 0.00216383 Jy ! Component: 150 - total flux cleaned = 0.00208197 Jy ! Component: 200 - total flux cleaned = 0.00208272 Jy ! Total flux subtracted in 200 components = 0.00208272 Jy ! Clean residual min=-0.007695 max=0.010569 Jy/beam ! Clean residual mean=-0.000044 rms=0.002443 Jy/beam ! Combined flux in latest and established models = 0.360549 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.360549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066315Jy sigma=0.000954 ! Fit after self-cal, rms=0.066280Jy sigma=0.000954 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102361 Jy ! Component: 100 - total flux cleaned = 0.0167109 Jy ! Component: 150 - total flux cleaned = 0.0203579 Jy ! Component: 200 - total flux cleaned = 0.0230836 Jy ! Total flux subtracted in 200 components = 0.0230836 Jy ! Clean residual min=-0.007112 max=0.006506 Jy/beam ! Clean residual mean=-0.000018 rms=0.001565 Jy/beam ! Combined flux in latest and established models = 0.383633 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 98 components and 0.383633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064304Jy sigma=0.000924 ! Fit after self-cal, rms=0.064132Jy sigma=0.000922 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064132Jy sigma=0.000922 ! Fit after self-cal, rms=0.063524Jy sigma=0.000921 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.521 mas, bmaj=9.729 mas, bpa=33.45 degrees ! Estimated noise=729.637 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429018 Jy ! Component: 100 - total flux cleaned = 0.00722633 Jy ! Component: 150 - total flux cleaned = 0.0091102 Jy ! Component: 200 - total flux cleaned = 0.0105146 Jy ! Total flux subtracted in 200 components = 0.0105146 Jy ! Clean residual min=-0.005220 max=0.004721 Jy/beam ! Clean residual mean=-0.000009 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.394148 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 121 components and 0.394148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063080Jy sigma=0.000914 ! Fit after self-cal, rms=0.063034Jy sigma=0.000914 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138555 Jy ! Component: 100 - total flux cleaned = 0.00237653 Jy ! Component: 150 - total flux cleaned = 0.00316967 Jy ! Component: 200 - total flux cleaned = 0.00376159 Jy ! Total flux subtracted in 200 components = 0.00376159 Jy ! Clean residual min=-0.004752 max=0.004304 Jy/beam ! Clean residual mean=-0.000005 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.397909 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 134 components and 0.397909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062889Jy sigma=0.000912 ! Fit after self-cal, rms=0.062870Jy sigma=0.000912 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062870Jy sigma=0.000912 ! Fit after self-cal, rms=0.062702Jy sigma=0.000911 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.621 mas, bmaj=9.861 mas, bpa=36.5 degrees ! Estimated noise=810.694 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213886 Jy ! Component: 100 - total flux cleaned = 0.00297553 Jy ! Component: 150 - total flux cleaned = 0.00377599 Jy ! Component: 200 - total flux cleaned = 0.00435132 Jy ! Total flux subtracted in 200 components = 0.00435132 Jy ! Clean residual min=-0.004086 max=0.004191 Jy/beam ! Clean residual mean=-0.000009 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.402261 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 159 components and 0.402261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062629Jy sigma=0.000910 ! Fit after self-cal, rms=0.062623Jy sigma=0.000910 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000232401 Jy ! Component: 100 - total flux cleaned = 0.000696783 Jy ! Component: 150 - total flux cleaned = 0.00109318 Jy ! Component: 200 - total flux cleaned = 0.00127044 Jy ! Total flux subtracted in 200 components = 0.00127044 Jy ! Clean residual min=-0.003999 max=0.003909 Jy/beam ! Clean residual mean=-0.000006 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.403531 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 191 components and 0.403531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062599Jy sigma=0.000909 ! Fit after self-cal, rms=0.062593Jy sigma=0.000909 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.523 mas, bmaj=9.73 mas, bpa=33.46 degrees ! Estimated noise=728.177 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.523 x 9.73 at 33.46 degrees (North through East) ! Clean map min=-0.0036389 max=0.29716 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.932 mas, bmaj=9.42 mas, bpa=32.7 degrees ! Estimated noise=1085.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.226611 Jy ! Component: 100 - total flux cleaned = 0.284348 Jy ! Component: 150 - total flux cleaned = 0.31278 Jy ! Component: 200 - total flux cleaned = 0.329785 Jy ! Total flux subtracted in 200 components = 0.329785 Jy ! Clean residual min=-0.009726 max=0.010661 Jy/beam ! Clean residual mean=-0.000030 rms=0.002692 Jy/beam ! Combined flux in latest and established models = 0.329785 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.329785 Jy ! Inverting map and beam ! Estimated beam: bmin=3.523 mas, bmaj=9.73 mas, bpa=33.46 degrees ! Estimated noise=728.177 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155744 Jy ! Component: 100 - total flux cleaned = 0.0264833 Jy ! Component: 150 - total flux cleaned = 0.0346282 Jy ! Component: 200 - total flux cleaned = 0.0410724 Jy ! Total flux subtracted in 200 components = 0.0410724 Jy ! Clean residual min=-0.006620 max=0.005606 Jy/beam ! Clean residual mean=-0.000038 rms=0.001768 Jy/beam ! Combined flux in latest and established models = 0.370857 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 61 components and 0.370857 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.621 mas, bmaj=9.861 mas, bpa=36.5 degrees ! Estimated noise=810.694 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0073436 Jy ! Component: 100 - total flux cleaned = 0.0128262 Jy ! Component: 150 - total flux cleaned = 0.0171281 Jy ! Component: 200 - total flux cleaned = 0.0206226 Jy ! Total flux subtracted in 200 components = 0.0206226 Jy ! Clean residual min=-0.004777 max=0.005087 Jy/beam ! Clean residual mean=-0.000033 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 0.39148 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288516 Jy ! Component: 100 - total flux cleaned = 0.00527624 Jy ! Component: 150 - total flux cleaned = 0.00726159 Jy ! Component: 200 - total flux cleaned = 0.00885056 Jy ! Total flux subtracted in 200 components = 0.00885056 Jy ! Clean residual min=-0.004374 max=0.004662 Jy/beam ! Clean residual mean=-0.000014 rms=0.001239 Jy/beam ! Combined flux in latest and established models = 0.40033 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 116 components and 0.40033 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.523 mas, bmaj=9.73 mas, bpa=33.46 degrees ! Estimated noise=728.177 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.62303e-05 Jy ! Component: 100 - total flux cleaned = 0.000147425 Jy ! Component: 150 - total flux cleaned = 0.000459986 Jy ! Component: 200 - total flux cleaned = 0.00064335 Jy ! Total flux subtracted in 200 components = 0.00064335 Jy ! Clean residual min=-0.004241 max=0.004280 Jy/beam ! Clean residual mean=-0.000006 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.400974 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 132 components and 0.400974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062868Jy sigma=0.000912 ! Fit after self-cal, rms=0.062742Jy sigma=0.000911 wmodel J1657+4808_S_2014_01_04_pus_map.mod ! Writing 132 model components to file: J1657+4808_S_2014_01_04_pus_map.mod wobs J1657+4808_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1657+4808_S_2014_01_04_pus_uvs.fits wwins J1657+4808_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1657+4808_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000718475 Jy ! Component: 100 - total flux cleaned = 0.000906246 Jy ! Component: 150 - total flux cleaned = 0.00101325 Jy ! Component: 200 - total flux cleaned = 0.00126226 Jy ! Component: 250 - total flux cleaned = 0.00158575 Jy ! Component: 300 - total flux cleaned = 0.00193272 Jy ! Component: 350 - total flux cleaned = 0.00221531 Jy ! Component: 400 - total flux cleaned = 0.00229181 Jy ! Component: 450 - total flux cleaned = 0.00254668 Jy ! Component: 500 - total flux cleaned = 0.00275168 Jy ! Component: 550 - total flux cleaned = 0.0028827 Jy ! Component: 600 - total flux cleaned = 0.00300818 Jy ! Component: 650 - total flux cleaned = 0.00312779 Jy ! Component: 700 - total flux cleaned = 0.00327078 Jy ! Component: 750 - total flux cleaned = 0.00337989 Jy ! Component: 800 - total flux cleaned = 0.00332757 Jy ! Component: 850 - total flux cleaned = 0.00322611 Jy ! Component: 900 - total flux cleaned = 0.00317701 Jy ! Component: 950 - total flux cleaned = 0.00308177 Jy ! Component: 1000 - total flux cleaned = 0.00294295 Jy ! Component: 1050 - total flux cleaned = 0.00292062 Jy ! Component: 1100 - total flux cleaned = 0.00283208 Jy ! Component: 1150 - total flux cleaned = 0.00276787 Jy ! Component: 1200 - total flux cleaned = 0.0027057 Jy ! Component: 1250 - total flux cleaned = 0.00266475 Jy ! Component: 1300 - total flux cleaned = 0.00260506 Jy ! Component: 1350 - total flux cleaned = 0.00258612 Jy ! Component: 1400 - total flux cleaned = 0.00258561 Jy ! Component: 1450 - total flux cleaned = 0.0025288 Jy ! Component: 1500 - total flux cleaned = 0.00254667 Jy ! Component: 1550 - total flux cleaned = 0.00251026 Jy ! Component: 1600 - total flux cleaned = 0.00251035 Jy ! Component: 1650 - total flux cleaned = 0.00252757 Jy ! Component: 1700 - total flux cleaned = 0.00256157 Jy ! Component: 1750 - total flux cleaned = 0.00251115 Jy ! Component: 1800 - total flux cleaned = 0.00256107 Jy ! Component: 1850 - total flux cleaned = 0.00262618 Jy ! Component: 1900 - total flux cleaned = 0.00262611 Jy ! Component: 1950 - total flux cleaned = 0.00265772 Jy ! Component: 2000 - total flux cleaned = 0.00268911 Jy ! Component: 2050 - total flux cleaned = 0.00270435 Jy ! Component: 2100 - total flux cleaned = 0.00270442 Jy ! Component: 2150 - total flux cleaned = 0.00270445 Jy ! Component: 2200 - total flux cleaned = 0.00274923 Jy ! Component: 2250 - total flux cleaned = 0.00277873 Jy ! Component: 2300 - total flux cleaned = 0.00282241 Jy ! Component: 2350 - total flux cleaned = 0.0028367 Jy ! Component: 2400 - total flux cleaned = 0.00285118 Jy ! Component: 2450 - total flux cleaned = 0.00290806 Jy ! Component: 2500 - total flux cleaned = 0.00292202 Jy ! Component: 2550 - total flux cleaned = 0.00292198 Jy ! Component: 2600 - total flux cleaned = 0.00294965 Jy ! Component: 2650 - total flux cleaned = 0.00293598 Jy ! Component: 2700 - total flux cleaned = 0.00296328 Jy ! Component: 2750 - total flux cleaned = 0.00296334 Jy ! Component: 2800 - total flux cleaned = 0.00297683 Jy ! Component: 2850 - total flux cleaned = 0.00300356 Jy ! Component: 2900 - total flux cleaned = 0.00303017 Jy ! Component: 2950 - total flux cleaned = 0.0030434 Jy ! Component: 3000 - total flux cleaned = 0.00308283 Jy ! Component: 3050 - total flux cleaned = 0.00310902 Jy ! Component: 3100 - total flux cleaned = 0.00314814 Jy ! Component: 3150 - total flux cleaned = 0.00317417 Jy ! Component: 3200 - total flux cleaned = 0.00317426 Jy ! Component: 3250 - total flux cleaned = 0.00318716 Jy ! Component: 3300 - total flux cleaned = 0.00321298 Jy ! Component: 3350 - total flux cleaned = 0.00322584 Jy ! Component: 3400 - total flux cleaned = 0.00323876 Jy ! Component: 3450 - total flux cleaned = 0.00325161 Jy ! Component: 3500 - total flux cleaned = 0.00330299 Jy ! Component: 3550 - total flux cleaned = 0.00329012 Jy ! Component: 3600 - total flux cleaned = 0.00332871 Jy ! Component: 3650 - total flux cleaned = 0.00331582 Jy ! Component: 3700 - total flux cleaned = 0.00334153 Jy ! Component: 3750 - total flux cleaned = 0.00335447 Jy ! Component: 3800 - total flux cleaned = 0.00338024 Jy ! Component: 3850 - total flux cleaned = 0.0034061 Jy ! Component: 3900 - total flux cleaned = 0.00341903 Jy ! Component: 3950 - total flux cleaned = 0.00341899 Jy ! Component: 4000 - total flux cleaned = 0.00345798 Jy ! Component: 4050 - total flux cleaned = 0.00348402 Jy ! Total flux subtracted in 4096 components = 0.00351006 Jy ! Clean residual min=-0.000955 max=0.000834 Jy/beam ! Clean residual mean=0.000001 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.404484 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 388 components and 0.404484 Jy ![Exited script file: muppet] wmap "J1657+4808_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.523 x 9.73 at 33.46 degrees (North through East) ! Clean map min=-0.0020883 max=0.29755 Jy/beam ! Writing clean map to FITS file: J1657+4808_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.297551 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000210688 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.212422 0.212422 0.424844 0.849688 1.69938 3.39875 6.7975 13.595 27.19 54.38 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.297 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.523 x 9.73 at 33.46 degrees (North through East) ! Clean map min=-0.0020883 max=0.29755 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1657+4808_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:32:36 2017