! Started logfile: J1656-0206_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:32:27 2017 obs J1656-0206_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1656-0206_S_2014_01_04_pus_uva.fits ! AN table 1: 97 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.500859 visibilities/baseline/integration-bin. ! Found source: J1656-0206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6996 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1656-0206_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.928659Jy sigma=0.012384 ! Fit after self-cal, rms=0.890648Jy sigma=0.011920 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.643 mas, bmaj=5.571 mas, bpa=0.1338 degrees ! Estimated noise=815.326 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0807621 Jy ! Component: 100 - total flux cleaned = 0.11551 Jy ! Total flux subtracted in 100 components = 0.11551 Jy ! Clean residual min=-0.015329 max=0.020778 Jy/beam ! Clean residual mean=0.000030 rms=0.004593 Jy/beam ! Combined flux in latest and established models = 0.11551 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.11551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107991Jy sigma=0.001283 ! Fit after self-cal, rms=0.107574Jy sigma=0.001280 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=6.293 mas, bpa=-0.6494 degrees ! Estimated noise=666.611 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0369327 Jy ! Component: 100 - total flux cleaned = 0.0585274 Jy ! Component: 150 - total flux cleaned = 0.0723641 Jy ! Component: 200 - total flux cleaned = 0.0815132 Jy ! Total flux subtracted in 200 components = 0.0815132 Jy ! Clean residual min=-0.014707 max=0.017190 Jy/beam ! Clean residual mean=0.000039 rms=0.004219 Jy/beam ! Combined flux in latest and established models = 0.197023 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 54 components and 0.197023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092493Jy sigma=0.001090 ! Fit after self-cal, rms=0.092092Jy sigma=0.001085 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 0.87 ! MK 1.06 NL 1.12 OV 0.96 PT 0.83 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 1.00* KP 1.00* LA 0.84 ! MK 1.04 NL 1.13 OV 1.01 PT 0.81 ! SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 0.70 ! MK 1.08 NL 1.10 OV 0.93 PT 0.80 ! SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 0.77 ! MK 1.43 NL 1.22 OV 1.08 PT 0.83 ! SC 0.87 ! ! ! Fit before self-cal, rms=0.092092Jy sigma=0.001085 ! Fit after self-cal, rms=0.091040Jy sigma=0.001002 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=6.556 mas, bpa=1.063 degrees ! Estimated noise=674.739 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (37, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131967 Jy ! Component: 100 - total flux cleaned = 0.0159646 Jy ! Component: 150 - total flux cleaned = 0.0168872 Jy ! Component: 200 - total flux cleaned = 0.0176258 Jy ! Total flux subtracted in 200 components = 0.0176258 Jy ! Clean residual min=-0.009133 max=0.010172 Jy/beam ! Clean residual mean=-0.000014 rms=0.002215 Jy/beam ! Combined flux in latest and established models = 0.214649 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 80 components and 0.214649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088921Jy sigma=0.000973 ! Fit after self-cal, rms=0.088309Jy sigma=0.000965 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088309Jy sigma=0.000965 ! Fit after self-cal, rms=0.087260Jy sigma=0.000956 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=6.574 mas, bpa=2.384 degrees ! Estimated noise=669.106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00574609 Jy ! Component: 100 - total flux cleaned = 0.00494989 Jy ! Component: 150 - total flux cleaned = 0.00426513 Jy ! Component: 200 - total flux cleaned = 0.00345973 Jy ! Total flux subtracted in 200 components = 0.00345973 Jy ! Clean residual min=-0.007599 max=0.007821 Jy/beam ! Clean residual mean=-0.000007 rms=0.001719 Jy/beam ! Combined flux in latest and established models = 0.218109 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 87 components and 0.218109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086527Jy sigma=0.000948 ! Fit after self-cal, rms=0.086502Jy sigma=0.000946 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-25.5, -25). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00668445 Jy ! Component: 100 - total flux cleaned = 0.00706369 Jy ! Component: 150 - total flux cleaned = 0.00670977 Jy ! Component: 200 - total flux cleaned = 0.00628465 Jy ! Total flux subtracted in 200 components = 0.00628465 Jy ! Clean residual min=-0.006609 max=0.005926 Jy/beam ! Clean residual mean=-0.000007 rms=0.001442 Jy/beam ! Combined flux in latest and established models = 0.224393 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 104 components and 0.224393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085792Jy sigma=0.000937 ! Fit after self-cal, rms=0.085771Jy sigma=0.000936 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085771Jy sigma=0.000936 ! Fit after self-cal, rms=0.086523Jy sigma=0.000934 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=6.584 mas, bpa=3.214 degrees ! Estimated noise=667.271 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342076 Jy ! Component: 100 - total flux cleaned = 0.00355248 Jy ! Component: 150 - total flux cleaned = 0.00327295 Jy ! Component: 200 - total flux cleaned = 0.00294355 Jy ! Total flux subtracted in 200 components = 0.00294355 Jy ! Clean residual min=-0.005630 max=0.005647 Jy/beam ! Clean residual mean=-0.000005 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.227337 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 113 components and 0.227337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086171Jy sigma=0.000931 ! Fit after self-cal, rms=0.086220Jy sigma=0.000930 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000918914 Jy ! Component: 100 - total flux cleaned = 0.000582558 Jy ! Component: 150 - total flux cleaned = 0.00029099 Jy ! Component: 200 - total flux cleaned = 0.000290356 Jy ! Total flux subtracted in 200 components = 0.000290356 Jy ! Clean residual min=-0.005521 max=0.005016 Jy/beam ! Clean residual mean=-0.000005 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.227627 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 118 components and 0.227627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086034Jy sigma=0.000928 ! Fit after self-cal, rms=0.086035Jy sigma=0.000928 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086035Jy sigma=0.000928 ! Fit after self-cal, rms=0.085742Jy sigma=0.000928 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.56 mas, bmaj=12.3 mas, bpa=13.33 degrees ! Estimated noise=751.253 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000585744 Jy ! Component: 100 - total flux cleaned = -0.000654732 Jy ! Component: 150 - total flux cleaned = -0.000540591 Jy ! Component: 200 - total flux cleaned = -0.000386973 Jy ! Total flux subtracted in 200 components = -0.000386973 Jy ! Clean residual min=-0.004820 max=0.004955 Jy/beam ! Clean residual mean=-0.000010 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 0.22724 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 133 components and 0.22724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085684Jy sigma=0.000927 ! Fit after self-cal, rms=0.085711Jy sigma=0.000927 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000211025 Jy ! Component: 100 - total flux cleaned = 0.00016636 Jy ! Component: 150 - total flux cleaned = 0.000121274 Jy ! Component: 200 - total flux cleaned = 7.99441e-05 Jy ! Total flux subtracted in 200 components = 7.99441e-05 Jy ! Clean residual min=-0.004456 max=0.004709 Jy/beam ! Clean residual mean=-0.000010 rms=0.001280 Jy/beam ! Combined flux in latest and established models = 0.22732 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 142 components and 0.22732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085688Jy sigma=0.000926 ! Fit after self-cal, rms=0.085688Jy sigma=0.000926 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=6.587 mas, bpa=3.818 degrees ! Estimated noise=663.172 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.16 x 6.587 at 3.818 degrees (North through East) ! Clean map min=-0.0046378 max=0.10552 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.702 mas, bmaj=5.77 mas, bpa=4.818 degrees ! Estimated noise=843.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0822266 Jy ! Component: 100 - total flux cleaned = 0.120915 Jy ! Component: 150 - total flux cleaned = 0.147782 Jy ! Component: 200 - total flux cleaned = 0.166912 Jy ! Total flux subtracted in 200 components = 0.166912 Jy ! Clean residual min=-0.010923 max=0.014658 Jy/beam ! Clean residual mean=0.000011 rms=0.002944 Jy/beam ! Combined flux in latest and established models = 0.166912 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.166912 Jy ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=6.587 mas, bpa=3.818 degrees ! Estimated noise=663.172 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208092 Jy ! Component: 100 - total flux cleaned = 0.0336233 Jy ! Component: 150 - total flux cleaned = 0.0426721 Jy ! Component: 200 - total flux cleaned = 0.0495137 Jy ! Total flux subtracted in 200 components = 0.0495137 Jy ! Clean residual min=-0.006669 max=0.005978 Jy/beam ! Clean residual mean=0.000001 rms=0.001562 Jy/beam ! Combined flux in latest and established models = 0.216426 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 50 components and 0.216426 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.56 mas, bmaj=12.3 mas, bpa=13.33 degrees ! Estimated noise=751.253 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00651253 Jy ! Component: 100 - total flux cleaned = 0.00939442 Jy ! Component: 150 - total flux cleaned = 0.0105966 Jy ! Component: 200 - total flux cleaned = 0.0107924 Jy ! Total flux subtracted in 200 components = 0.0107924 Jy ! Clean residual min=-0.004862 max=0.004923 Jy/beam ! Clean residual mean=-0.000011 rms=0.001385 Jy/beam ! Combined flux in latest and established models = 0.227218 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.65643e-06 Jy ! Component: 100 - total flux cleaned = 7.9081e-05 Jy ! Component: 150 - total flux cleaned = -4.17791e-05 Jy ! Component: 200 - total flux cleaned = -0.000325507 Jy ! Total flux subtracted in 200 components = -0.000325507 Jy ! Clean residual min=-0.004393 max=0.004521 Jy/beam ! Clean residual mean=-0.000009 rms=0.001269 Jy/beam ! Combined flux in latest and established models = 0.226892 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 94 components and 0.226892 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=6.587 mas, bpa=3.818 degrees ! Estimated noise=663.172 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000967159 Jy ! Component: 100 - total flux cleaned = 0.00110417 Jy ! Component: 150 - total flux cleaned = 0.00110348 Jy ! Component: 200 - total flux cleaned = 0.00130202 Jy ! Total flux subtracted in 200 components = 0.00130202 Jy ! Clean residual min=-0.004739 max=0.004879 Jy/beam ! Clean residual mean=-0.000003 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.228194 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 114 components and 0.228194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085598Jy sigma=0.000927 ! Fit after self-cal, rms=0.085454Jy sigma=0.000925 wmodel J1656-0206_S_2014_01_04_pus_map.mod ! Writing 114 model components to file: J1656-0206_S_2014_01_04_pus_map.mod wobs J1656-0206_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1656-0206_S_2014_01_04_pus_uvs.fits wwins J1656-0206_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J1656-0206_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.9305e-05 Jy ! Component: 100 - total flux cleaned = -0.000132375 Jy ! Component: 150 - total flux cleaned = -0.000329067 Jy ! Component: 200 - total flux cleaned = -0.000448197 Jy ! Component: 250 - total flux cleaned = -0.000673725 Jy ! Component: 300 - total flux cleaned = -0.000779878 Jy ! Component: 350 - total flux cleaned = -0.00103095 Jy ! Component: 400 - total flux cleaned = -0.001318 Jy ! Component: 450 - total flux cleaned = -0.00154599 Jy ! Component: 500 - total flux cleaned = -0.00171969 Jy ! Component: 550 - total flux cleaned = -0.00180417 Jy ! Component: 600 - total flux cleaned = -0.00180477 Jy ! Component: 650 - total flux cleaned = -0.00180734 Jy ! Component: 700 - total flux cleaned = -0.00191908 Jy ! Component: 750 - total flux cleaned = -0.00198819 Jy ! Component: 800 - total flux cleaned = -0.0018167 Jy ! Component: 850 - total flux cleaned = -0.00168397 Jy ! Component: 900 - total flux cleaned = -0.00149046 Jy ! Component: 950 - total flux cleaned = -0.00136519 Jy ! Component: 1000 - total flux cleaned = -0.00124234 Jy ! Component: 1050 - total flux cleaned = -0.00109208 Jy ! Component: 1100 - total flux cleaned = -0.00100387 Jy ! Component: 1150 - total flux cleaned = -0.000860137 Jy ! Component: 1200 - total flux cleaned = -0.000692153 Jy ! Component: 1250 - total flux cleaned = -0.00055508 Jy ! Component: 1300 - total flux cleaned = -0.000339937 Jy ! Component: 1350 - total flux cleaned = -0.000155269 Jy ! Component: 1400 - total flux cleaned = 0.000129151 Jy ! Component: 1450 - total flux cleaned = 0.000255963 Jy ! Component: 1500 - total flux cleaned = 0.000405801 Jy ! Component: 1550 - total flux cleaned = 0.000504055 Jy ! Component: 1600 - total flux cleaned = 0.000624528 Jy ! Component: 1650 - total flux cleaned = 0.000743214 Jy ! Component: 1700 - total flux cleaned = 0.000789722 Jy ! Component: 1750 - total flux cleaned = 0.00088232 Jy ! Component: 1800 - total flux cleaned = 0.000973113 Jy ! Component: 1850 - total flux cleaned = 0.00104076 Jy ! Component: 1900 - total flux cleaned = 0.00106318 Jy ! Component: 1950 - total flux cleaned = 0.00119311 Jy ! Component: 2000 - total flux cleaned = 0.00127804 Jy ! Component: 2050 - total flux cleaned = 0.00131985 Jy ! Component: 2100 - total flux cleaned = 0.00136141 Jy ! Component: 2150 - total flux cleaned = 0.00142245 Jy ! Component: 2200 - total flux cleaned = 0.00136224 Jy ! Component: 2250 - total flux cleaned = 0.00140249 Jy ! Component: 2300 - total flux cleaned = 0.00150052 Jy ! Component: 2350 - total flux cleaned = 0.00146191 Jy ! Component: 2400 - total flux cleaned = 0.00150032 Jy ! Component: 2450 - total flux cleaned = 0.00148153 Jy ! Component: 2500 - total flux cleaned = 0.00151874 Jy ! Component: 2550 - total flux cleaned = 0.00151856 Jy ! Component: 2600 - total flux cleaned = 0.0015548 Jy ! Component: 2650 - total flux cleaned = 0.00155449 Jy ! Component: 2700 - total flux cleaned = 0.00158991 Jy ! Component: 2750 - total flux cleaned = 0.00162483 Jy ! Component: 2800 - total flux cleaned = 0.00167677 Jy ! Component: 2850 - total flux cleaned = 0.00165957 Jy ! Component: 2900 - total flux cleaned = 0.00169361 Jy ! Component: 2950 - total flux cleaned = 0.00167682 Jy ! Component: 3000 - total flux cleaned = 0.00164399 Jy ! Component: 3050 - total flux cleaned = 0.00162783 Jy ! Component: 3100 - total flux cleaned = 0.00167687 Jy ! Component: 3150 - total flux cleaned = 0.00164454 Jy ! Component: 3200 - total flux cleaned = 0.00156483 Jy ! Component: 3250 - total flux cleaned = 0.00154907 Jy ! Component: 3300 - total flux cleaned = 0.00159599 Jy ! Component: 3350 - total flux cleaned = 0.00156478 Jy ! Component: 3400 - total flux cleaned = 0.00153401 Jy ! Component: 3450 - total flux cleaned = 0.00153418 Jy ! Component: 3500 - total flux cleaned = 0.00157973 Jy ! Component: 3550 - total flux cleaned = 0.00157972 Jy ! Component: 3600 - total flux cleaned = 0.00156472 Jy ! Component: 3650 - total flux cleaned = 0.00154981 Jy ! Component: 3700 - total flux cleaned = 0.00152039 Jy ! Component: 3750 - total flux cleaned = 0.00152047 Jy ! Component: 3800 - total flux cleaned = 0.00154952 Jy ! Component: 3850 - total flux cleaned = 0.00156386 Jy ! Component: 3900 - total flux cleaned = 0.0015064 Jy ! Component: 3950 - total flux cleaned = 0.00152074 Jy ! Component: 4000 - total flux cleaned = 0.00153496 Jy ! Component: 4050 - total flux cleaned = 0.00153488 Jy ! Total flux subtracted in 4096 components = 0.00150678 Jy ! Clean residual min=-0.000853 max=0.000767 Jy/beam ! Clean residual mean=-0.000001 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.229701 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 357 components and 0.229701 Jy ![Exited script file: muppet] wmap "J1656-0206_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.16 x 6.587 at 3.818 degrees (North through East) ! Clean map min=-0.0030891 max=0.10736 Jy/beam ! Writing clean map to FITS file: J1656-0206_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.107363 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000229453 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.641152 0.641152 1.2823 2.56461 5.12921 10.2584 20.5169 41.0337 82.0674 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.16 x 6.587 at 3.818 degrees (North through East) ! Clean map min=-0.0030891 max=0.10736 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1656-0206_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:32:31 2017