! Started logfile: J1655+4233_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:32:23 2017 obs J1655+4233_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1655+4233_S_2014_01_04_pus_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.432593 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1655+4233 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4672 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1655+4233_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.915753Jy sigma=0.014389 ! Fit after self-cal, rms=0.899895Jy sigma=0.014154 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.123 mas, bmaj=9.835 mas, bpa=29.93 degrees ! Estimated noise=874.789 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0768396 Jy ! Component: 100 - total flux cleaned = 0.0962995 Jy ! Total flux subtracted in 100 components = 0.0962995 Jy ! Clean residual min=-0.005019 max=0.007615 Jy/beam ! Clean residual mean=0.000014 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 0.0962995 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0962995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067536Jy sigma=0.000927 ! Fit after self-cal, rms=0.067506Jy sigma=0.000927 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.784 mas, bmaj=9.632 mas, bpa=31.02 degrees ! Estimated noise=692.563 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00929426 Jy ! Component: 100 - total flux cleaned = 0.0138238 Jy ! Component: 150 - total flux cleaned = 0.0168716 Jy ! Component: 200 - total flux cleaned = 0.0190887 Jy ! Total flux subtracted in 200 components = 0.0190887 Jy ! Clean residual min=-0.003335 max=0.003945 Jy/beam ! Clean residual mean=0.000024 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.115388 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 39 components and 0.115388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065922Jy sigma=0.000910 ! Fit after self-cal, rms=0.065885Jy sigma=0.000910 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 1.04 ! MK 0.96 NL 0.94 OV 0.96 PT 0.99 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* KP 1.00* LA 0.99 ! MK 0.92 NL 1.00 OV 0.99 PT 1.01 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* KP 1.00* LA 0.83 ! MK 1.00 NL 0.96 OV 0.91 PT 0.97 ! SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.00* KP 1.00* LA 0.87 ! MK 0.97 NL 1.09 OV 1.01 PT 1.00 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.065885Jy sigma=0.000910 ! Fit after self-cal, rms=0.062565Jy sigma=0.000893 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.793 mas, bmaj=9.738 mas, bpa=30.58 degrees ! Estimated noise=685.314 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000393968 Jy ! Component: 100 - total flux cleaned = -0.000325758 Jy ! Component: 150 - total flux cleaned = -0.000243003 Jy ! Component: 200 - total flux cleaned = -0.000194269 Jy ! Total flux subtracted in 200 components = -0.000194269 Jy ! Clean residual min=-0.002015 max=0.002494 Jy/beam ! Clean residual mean=0.000008 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.115194 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 59 components and 0.115194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062529Jy sigma=0.000893 ! Fit after self-cal, rms=0.062336Jy sigma=0.000892 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062336Jy sigma=0.000892 ! Fit after self-cal, rms=0.062149Jy sigma=0.000891 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.792 mas, bmaj=9.711 mas, bpa=30.56 degrees ! Estimated noise=684.501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125481 Jy ! Component: 100 - total flux cleaned = 0.000250418 Jy ! Component: 150 - total flux cleaned = 0.000373632 Jy ! Component: 200 - total flux cleaned = 0.000442373 Jy ! Total flux subtracted in 200 components = 0.000442373 Jy ! Clean residual min=-0.001808 max=0.002051 Jy/beam ! Clean residual mean=0.000009 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.115636 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 0.115636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062128Jy sigma=0.000890 ! Fit after self-cal, rms=0.062125Jy sigma=0.000890 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.5075e-05 Jy ! Component: 100 - total flux cleaned = 6.6092e-05 Jy ! Component: 150 - total flux cleaned = 7.97943e-05 Jy ! Component: 200 - total flux cleaned = 7.95338e-05 Jy ! Total flux subtracted in 200 components = 7.95338e-05 Jy ! Clean residual min=-0.001765 max=0.002029 Jy/beam ! Clean residual mean=0.000009 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.115716 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 74 components and 0.115716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062116Jy sigma=0.000890 ! Fit after self-cal, rms=0.062123Jy sigma=0.000890 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062123Jy sigma=0.000890 ! Fit after self-cal, rms=0.062142Jy sigma=0.000890 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.791 mas, bmaj=9.699 mas, bpa=30.53 degrees ! Estimated noise=685.257 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000387047 Jy ! Component: 100 - total flux cleaned = 0.000479888 Jy ! Component: 150 - total flux cleaned = 0.000504796 Jy ! Component: 200 - total flux cleaned = 0.000516658 Jy ! Total flux subtracted in 200 components = 0.000516658 Jy ! Clean residual min=-0.001766 max=0.001927 Jy/beam ! Clean residual mean=0.000010 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.116233 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.116233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062133Jy sigma=0.000890 ! Fit after self-cal, rms=0.062130Jy sigma=0.000890 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.21183e-05 Jy ! Component: 100 - total flux cleaned = 5.31526e-05 Jy ! Component: 150 - total flux cleaned = 7.32358e-05 Jy ! Component: 200 - total flux cleaned = 8.24026e-05 Jy ! Total flux subtracted in 200 components = 8.24026e-05 Jy ! Clean residual min=-0.001761 max=0.001903 Jy/beam ! Clean residual mean=0.000010 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.116315 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 82 components and 0.116315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062126Jy sigma=0.000890 ! Fit after self-cal, rms=0.062130Jy sigma=0.000890 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062130Jy sigma=0.000890 ! Fit after self-cal, rms=0.062154Jy sigma=0.000890 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.996 mas, bmaj=10.4 mas, bpa=30.63 degrees ! Estimated noise=764.545 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407512 Jy ! Component: 100 - total flux cleaned = 0.000564802 Jy ! Component: 150 - total flux cleaned = 0.000681474 Jy ! Component: 200 - total flux cleaned = 0.000751585 Jy ! Total flux subtracted in 200 components = 0.000751585 Jy ! Clean residual min=-0.002191 max=0.002122 Jy/beam ! Clean residual mean=0.000018 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.117067 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 95 components and 0.117067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062153Jy sigma=0.000890 ! Fit after self-cal, rms=0.062152Jy sigma=0.000890 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.82207e-05 Jy ! Component: 100 - total flux cleaned = 8.8763e-05 Jy ! Component: 150 - total flux cleaned = 0.000100079 Jy ! Component: 200 - total flux cleaned = 0.000109716 Jy ! Total flux subtracted in 200 components = 0.000109716 Jy ! Clean residual min=-0.002178 max=0.002073 Jy/beam ! Clean residual mean=0.000018 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.117176 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 105 components and 0.117176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062151Jy sigma=0.000890 ! Fit after self-cal, rms=0.062152Jy sigma=0.000890 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.79 mas, bmaj=9.692 mas, bpa=30.49 degrees ! Estimated noise=685.759 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.79 x 9.692 at 30.49 degrees (North through East) ! Clean map min=-0.0016923 max=0.099041 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=9.954 mas, bpa=29.46 degrees ! Estimated noise=871.086 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0764701 Jy ! Component: 100 - total flux cleaned = 0.0964986 Jy ! Component: 150 - total flux cleaned = 0.104271 Jy ! Component: 200 - total flux cleaned = 0.108344 Jy ! Total flux subtracted in 200 components = 0.108344 Jy ! Clean residual min=-0.003051 max=0.002800 Jy/beam ! Clean residual mean=0.000006 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.108344 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.108344 Jy ! Inverting map and beam ! Estimated beam: bmin=3.79 mas, bmaj=9.692 mas, bpa=30.49 degrees ! Estimated noise=685.759 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295288 Jy ! Component: 100 - total flux cleaned = 0.00481355 Jy ! Component: 150 - total flux cleaned = 0.00565021 Jy ! Component: 200 - total flux cleaned = 0.00622616 Jy ! Total flux subtracted in 200 components = 0.00622616 Jy ! Clean residual min=-0.002148 max=0.002206 Jy/beam ! Clean residual mean=0.000012 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.11457 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 34 components and 0.11457 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.996 mas, bmaj=10.4 mas, bpa=30.63 degrees ! Estimated noise=764.545 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122401 Jy ! Component: 100 - total flux cleaned = 0.00166003 Jy ! Component: 150 - total flux cleaned = 0.00197259 Jy ! Component: 200 - total flux cleaned = 0.00220261 Jy ! Total flux subtracted in 200 components = 0.00220261 Jy ! Clean residual min=-0.002275 max=0.002206 Jy/beam ! Clean residual mean=0.000019 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.116773 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.35005e-05 Jy ! Component: 100 - total flux cleaned = 0.000118101 Jy ! Component: 150 - total flux cleaned = 0.000147513 Jy ! Component: 200 - total flux cleaned = 0.000161872 Jy ! Total flux subtracted in 200 components = 0.000161872 Jy ! Clean residual min=-0.002212 max=0.002123 Jy/beam ! Clean residual mean=0.000019 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.116935 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 54 components and 0.116935 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.79 mas, bmaj=9.692 mas, bpa=30.49 degrees ! Estimated noise=685.759 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000342568 Jy ! Component: 100 - total flux cleaned = -0.000342804 Jy ! Component: 150 - total flux cleaned = -0.000326342 Jy ! Component: 200 - total flux cleaned = -0.000326834 Jy ! Total flux subtracted in 200 components = -0.000326834 Jy ! Clean residual min=-0.001745 max=0.001944 Jy/beam ! Clean residual mean=0.000010 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.116608 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 61 components and 0.116608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062153Jy sigma=0.000890 ! Fit after self-cal, rms=0.062142Jy sigma=0.000890 wmodel J1655+4233_S_2014_01_04_pus_map.mod ! Writing 61 model components to file: J1655+4233_S_2014_01_04_pus_map.mod wobs J1655+4233_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1655+4233_S_2014_01_04_pus_uvs.fits wwins J1655+4233_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1655+4233_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000421026 Jy ! Component: 100 - total flux cleaned = 0.000512832 Jy ! Component: 150 - total flux cleaned = 0.000596509 Jy ! Component: 200 - total flux cleaned = 0.000648209 Jy ! Component: 250 - total flux cleaned = 0.000671514 Jy ! Component: 300 - total flux cleaned = 0.000806436 Jy ! Component: 350 - total flux cleaned = 0.000955042 Jy ! Component: 400 - total flux cleaned = 0.00109791 Jy ! Component: 450 - total flux cleaned = 0.00119554 Jy ! Component: 500 - total flux cleaned = 0.00125138 Jy ! Component: 550 - total flux cleaned = 0.00139739 Jy ! Component: 600 - total flux cleaned = 0.0015208 Jy ! Component: 650 - total flux cleaned = 0.0016918 Jy ! Component: 700 - total flux cleaned = 0.00182469 Jy ! Component: 750 - total flux cleaned = 0.00201875 Jy ! Component: 800 - total flux cleaned = 0.00212871 Jy ! Component: 850 - total flux cleaned = 0.00225142 Jy ! Component: 900 - total flux cleaned = 0.00235573 Jy ! Component: 950 - total flux cleaned = 0.00242838 Jy ! Component: 1000 - total flux cleaned = 0.00251338 Jy ! Component: 1050 - total flux cleaned = 0.00254115 Jy ! Component: 1100 - total flux cleaned = 0.00262268 Jy ! Component: 1150 - total flux cleaned = 0.00264904 Jy ! Component: 1200 - total flux cleaned = 0.00263619 Jy ! Component: 1250 - total flux cleaned = 0.00270007 Jy ! Component: 1300 - total flux cleaned = 0.00266223 Jy ! Component: 1350 - total flux cleaned = 0.00266224 Jy ! Component: 1400 - total flux cleaned = 0.00262567 Jy ! Component: 1450 - total flux cleaned = 0.0026256 Jy ! Component: 1500 - total flux cleaned = 0.00257829 Jy ! Component: 1550 - total flux cleaned = 0.00256658 Jy ! Component: 1600 - total flux cleaned = 0.0025321 Jy ! Component: 1650 - total flux cleaned = 0.00252073 Jy ! Component: 1700 - total flux cleaned = 0.00248713 Jy ! Component: 1750 - total flux cleaned = 0.00245372 Jy ! Component: 1800 - total flux cleaned = 0.00243182 Jy ! Component: 1850 - total flux cleaned = 0.00241007 Jy ! Component: 1900 - total flux cleaned = 0.00237767 Jy ! Component: 1950 - total flux cleaned = 0.00233497 Jy ! Component: 2000 - total flux cleaned = 0.00232428 Jy ! Component: 2050 - total flux cleaned = 0.00223016 Jy ! Component: 2100 - total flux cleaned = 0.0022095 Jy ! Component: 2150 - total flux cleaned = 0.0021889 Jy ! Component: 2200 - total flux cleaned = 0.00212785 Jy ! Component: 2250 - total flux cleaned = 0.00209769 Jy ! Component: 2300 - total flux cleaned = 0.00208768 Jy ! Component: 2350 - total flux cleaned = 0.00207776 Jy ! Component: 2400 - total flux cleaned = 0.00203839 Jy ! Component: 2450 - total flux cleaned = 0.00203852 Jy ! Component: 2500 - total flux cleaned = 0.00206758 Jy ! Component: 2550 - total flux cleaned = 0.00204829 Jy ! Component: 2600 - total flux cleaned = 0.00203876 Jy ! Component: 2650 - total flux cleaned = 0.00204823 Jy ! Component: 2700 - total flux cleaned = 0.00207647 Jy ! Component: 2750 - total flux cleaned = 0.00205774 Jy ! Component: 2800 - total flux cleaned = 0.00206703 Jy ! Component: 2850 - total flux cleaned = 0.00207624 Jy ! Component: 2900 - total flux cleaned = 0.00210373 Jy ! Component: 2950 - total flux cleaned = 0.00214004 Jy ! Component: 3000 - total flux cleaned = 0.00212195 Jy ! Component: 3050 - total flux cleaned = 0.00215792 Jy ! Component: 3100 - total flux cleaned = 0.00214902 Jy ! Component: 3150 - total flux cleaned = 0.00218458 Jy ! Component: 3200 - total flux cleaned = 0.00220226 Jy ! Component: 3250 - total flux cleaned = 0.00220225 Jy ! Component: 3300 - total flux cleaned = 0.00224603 Jy ! Component: 3350 - total flux cleaned = 0.00224601 Jy ! Component: 3400 - total flux cleaned = 0.00226338 Jy ! Component: 3450 - total flux cleaned = 0.00228935 Jy ! Component: 3500 - total flux cleaned = 0.00227215 Jy ! Component: 3550 - total flux cleaned = 0.00228073 Jy ! Component: 3600 - total flux cleaned = 0.00228077 Jy ! Component: 3650 - total flux cleaned = 0.00227224 Jy ! Component: 3700 - total flux cleaned = 0.00226366 Jy ! Component: 3750 - total flux cleaned = 0.00226362 Jy ! Component: 3800 - total flux cleaned = 0.00223821 Jy ! Component: 3850 - total flux cleaned = 0.00223821 Jy ! Component: 3900 - total flux cleaned = 0.00222982 Jy ! Component: 3950 - total flux cleaned = 0.0022214 Jy ! Component: 4000 - total flux cleaned = 0.00220456 Jy ! Component: 4050 - total flux cleaned = 0.00217938 Jy ! Total flux subtracted in 4096 components = 0.00216264 Jy ! Clean residual min=-0.000535 max=0.000486 Jy/beam ! Clean residual mean=0.000003 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.11877 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 322 components and 0.11877 Jy ![Exited script file: muppet] wmap "J1655+4233_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.79 x 9.692 at 30.49 degrees (North through East) ! Clean map min=-0.0010479 max=0.09877 Jy/beam ! Writing clean map to FITS file: J1655+4233_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0987702 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000143107 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.434667 0.434667 0.869334 1.73867 3.47734 6.95467 13.9093 27.8187 55.6374 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.098 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.79 x 9.692 at 30.49 degrees (North through East) ! Clean map min=-0.0010479 max=0.09877 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1655+4233_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:32:27 2017