! Started logfile: J1653-1551_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:32:17 2017 obs J1653-1551_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1653-1551_S_2014_01_04_pus_uva.fits ! AN table 1: 85 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J1653-1551 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7140 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1653-1551_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.880423Jy sigma=0.102306 ! Fit after self-cal, rms=0.855894Jy sigma=0.102257 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.63 mas, bmaj=5.422 mas, bpa=1.915 degrees ! Estimated noise=776.504 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0799261 Jy ! Component: 100 - total flux cleaned = 0.100285 Jy ! Total flux subtracted in 100 components = 0.100285 Jy ! Clean residual min=-0.018932 max=0.026684 Jy/beam ! Clean residual mean=-0.000001 rms=0.006481 Jy/beam ! Combined flux in latest and established models = 0.100285 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.100285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129361Jy sigma=0.009723 ! Fit after self-cal, rms=0.129339Jy sigma=0.009712 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=6.435 mas, bpa=2.316 degrees ! Estimated noise=531.112 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.009899 Jy ! Component: 100 - total flux cleaned = 0.0135485 Jy ! Component: 150 - total flux cleaned = 0.0143427 Jy ! Component: 200 - total flux cleaned = 0.014899 Jy ! Total flux subtracted in 200 components = 0.014899 Jy ! Clean residual min=-0.021104 max=0.029984 Jy/beam ! Clean residual mean=0.000003 rms=0.007123 Jy/beam ! Combined flux in latest and established models = 0.115184 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.115184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126032Jy sigma=0.010375 ! Fit after self-cal, rms=0.126030Jy sigma=0.010375 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* KP 1.00* LA 0.76 ! MK 0.99 NL 0.85 OV 0.77 PT 0.83 ! SC 0.76 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* KP 1.00* LA 0.82 ! MK 1.01 NL 0.88 OV 0.84 PT 0.78 ! SC 0.83 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 96.41 FD 1.00* KP 1.00* LA 0.68 ! MK 1.04 NL 0.85 OV 0.77 PT 0.79 ! SC 0.81 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* KP 1.00* LA 0.72 ! MK 0.95 NL 0.97 OV 0.81 PT 0.82 ! SC 0.83 ! ! ! Fit before self-cal, rms=0.126030Jy sigma=0.010375 ! Fit after self-cal, rms=3.589849Jy sigma=0.001133 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=6.716 mas, bpa=3.376 degrees ! Estimated noise=597.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012495 Jy ! Component: 100 - total flux cleaned = 0.0167228 Jy ! Component: 150 - total flux cleaned = 0.0170474 Jy ! Component: 200 - total flux cleaned = 0.0171921 Jy ! Total flux subtracted in 200 components = 0.0171921 Jy ! Clean residual min=-0.013059 max=0.008320 Jy/beam ! Clean residual mean=-0.000008 rms=0.002563 Jy/beam ! Combined flux in latest and established models = 0.132376 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 38 components and 0.132376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.586817Jy sigma=0.001149 ! Fit after self-cal, rms=3.587908Jy sigma=0.001137 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.587908Jy sigma=0.001137 ! Fit after self-cal, rms=4.757384Jy sigma=0.001098 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.917 mas, bmaj=6.622 mas, bpa=2.982 degrees ! Estimated noise=653.824 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120613 Jy ! Component: 100 - total flux cleaned = 0.0171436 Jy ! Component: 150 - total flux cleaned = 0.0177906 Jy ! Component: 200 - total flux cleaned = 0.017908 Jy ! Total flux subtracted in 200 components = 0.017908 Jy ! Clean residual min=-0.012318 max=0.006714 Jy/beam ! Clean residual mean=-0.000005 rms=0.002311 Jy/beam ! Combined flux in latest and established models = 0.150284 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.150284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.754473Jy sigma=0.001111 ! Fit after self-cal, rms=4.754466Jy sigma=0.001111 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018294 Jy ! Component: 100 - total flux cleaned = 0.000280138 Jy ! Component: 150 - total flux cleaned = 0.000458321 Jy ! Component: 200 - total flux cleaned = 0.000541392 Jy ! Total flux subtracted in 200 components = 0.000541392 Jy ! Clean residual min=-0.012097 max=0.006689 Jy/beam ! Clean residual mean=-0.000005 rms=0.002267 Jy/beam ! Combined flux in latest and established models = 0.150826 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.150826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.754164Jy sigma=0.001112 ! Fit after self-cal, rms=4.754161Jy sigma=0.001112 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.754161Jy sigma=0.001112 ! Fit after self-cal, rms=4.771050Jy sigma=0.001033 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=6.543 mas, bpa=3.046 degrees ! Estimated noise=685.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00690373 Jy ! Component: 100 - total flux cleaned = 0.0102595 Jy ! Component: 150 - total flux cleaned = 0.0117547 Jy ! Component: 200 - total flux cleaned = 0.0121506 Jy ! Total flux subtracted in 200 components = 0.0121506 Jy ! Clean residual min=-0.009050 max=0.005999 Jy/beam ! Clean residual mean=0.000000 rms=0.002126 Jy/beam ! Combined flux in latest and established models = 0.162976 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 45 components and 0.162976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.769721Jy sigma=0.001038 ! Fit after self-cal, rms=4.769713Jy sigma=0.001035 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.81594e-05 Jy ! Component: 100 - total flux cleaned = 0.000195566 Jy ! Component: 150 - total flux cleaned = 0.000284664 Jy ! Component: 200 - total flux cleaned = 0.000368229 Jy ! Total flux subtracted in 200 components = 0.000368229 Jy ! Clean residual min=-0.009020 max=0.006158 Jy/beam ! Clean residual mean=0.000000 rms=0.002112 Jy/beam ! Combined flux in latest and established models = 0.163345 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.163345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.769592Jy sigma=0.001036 ! Fit after self-cal, rms=4.769591Jy sigma=0.001036 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.769591Jy sigma=0.001036 ! Fit after self-cal, rms=5.137577Jy sigma=0.001030 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.3 mas, bmaj=15.06 mas, bpa=9.925 degrees ! Estimated noise=953.179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102189 Jy ! Component: 100 - total flux cleaned = 0.0131118 Jy ! Component: 150 - total flux cleaned = 0.0132248 Jy ! Component: 200 - total flux cleaned = 0.0131358 Jy ! Total flux subtracted in 200 components = 0.0131358 Jy ! Clean residual min=-0.015235 max=0.009988 Jy/beam ! Clean residual mean=-0.000001 rms=0.003975 Jy/beam ! Combined flux in latest and established models = 0.17648 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.17648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.136105Jy sigma=0.001037 ! Fit after self-cal, rms=5.136105Jy sigma=0.001037 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.86246e-05 Jy ! Component: 100 - total flux cleaned = -0.000141472 Jy ! Component: 150 - total flux cleaned = -0.000219319 Jy ! Component: 200 - total flux cleaned = -0.000254597 Jy ! Total flux subtracted in 200 components = -0.000254597 Jy ! Clean residual min=-0.015098 max=0.010010 Jy/beam ! Clean residual mean=-0.000001 rms=0.003955 Jy/beam ! Combined flux in latest and established models = 0.176226 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 56 components and 0.176226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.136077Jy sigma=0.001038 ! Fit after self-cal, rms=5.136073Jy sigma=0.001038 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=6.495 mas, bpa=3.101 degrees ! Estimated noise=723.327 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.857 x 6.495 at 3.101 degrees (North through East) ! Clean map min=-0.0090536 max=0.13733 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=5.631 mas, bpa=3.078 degrees ! Estimated noise=991.742 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102614 Jy ! Component: 100 - total flux cleaned = 0.132058 Jy ! Component: 150 - total flux cleaned = 0.147534 Jy ! Component: 200 - total flux cleaned = 0.156524 Jy ! Total flux subtracted in 200 components = 0.156524 Jy ! Clean residual min=-0.006946 max=0.006837 Jy/beam ! Clean residual mean=0.000003 rms=0.001908 Jy/beam ! Combined flux in latest and established models = 0.156524 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.156524 Jy ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=6.495 mas, bpa=3.101 degrees ! Estimated noise=723.327 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00917258 Jy ! Component: 100 - total flux cleaned = 0.0141593 Jy ! Component: 150 - total flux cleaned = 0.0169613 Jy ! Component: 200 - total flux cleaned = 0.018357 Jy ! Total flux subtracted in 200 components = 0.018357 Jy ! Clean residual min=-0.009314 max=0.006649 Jy/beam ! Clean residual mean=0.000000 rms=0.002259 Jy/beam ! Combined flux in latest and established models = 0.174881 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 0.174881 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.3 mas, bmaj=15.06 mas, bpa=9.925 degrees ! Estimated noise=953.179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140586 Jy ! Component: 100 - total flux cleaned = 0.00146849 Jy ! Component: 150 - total flux cleaned = 0.00151518 Jy ! Component: 200 - total flux cleaned = 0.00155541 Jy ! Total flux subtracted in 200 components = 0.00155541 Jy ! Clean residual min=-0.015120 max=0.010078 Jy/beam ! Clean residual mean=-0.000001 rms=0.003969 Jy/beam ! Combined flux in latest and established models = 0.176437 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.78615e-05 Jy ! Component: 100 - total flux cleaned = -7.59074e-05 Jy ! Component: 150 - total flux cleaned = -0.000112154 Jy ! Component: 200 - total flux cleaned = -0.000111421 Jy ! Total flux subtracted in 200 components = -0.000111421 Jy ! Clean residual min=-0.015052 max=0.010097 Jy/beam ! Clean residual mean=-0.000001 rms=0.003953 Jy/beam ! Combined flux in latest and established models = 0.176325 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.176325 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=6.495 mas, bpa=3.101 degrees ! Estimated noise=723.327 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131268 Jy ! Component: 100 - total flux cleaned = -7.46276e-05 Jy ! Component: 150 - total flux cleaned = -0.000194271 Jy ! Component: 200 - total flux cleaned = -0.000261542 Jy ! Total flux subtracted in 200 components = -0.000261542 Jy ! Clean residual min=-0.009307 max=0.006669 Jy/beam ! Clean residual mean=0.000000 rms=0.002247 Jy/beam ! Combined flux in latest and established models = 0.176064 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.176064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.135893Jy sigma=0.001038 ! Fit after self-cal, rms=5.135882Jy sigma=0.001038 wmodel J1653-1551_S_2014_01_04_pus_map.mod ! Writing 57 model components to file: J1653-1551_S_2014_01_04_pus_map.mod wobs J1653-1551_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1653-1551_S_2014_01_04_pus_uvs.fits wwins J1653-1551_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1653-1551_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00415166 Jy ! Component: 100 - total flux cleaned = -0.00769173 Jy ! Component: 150 - total flux cleaned = -0.00949648 Jy ! Component: 200 - total flux cleaned = -0.010344 Jy ! Component: 250 - total flux cleaned = -0.0112633 Jy ! Component: 300 - total flux cleaned = -0.0119221 Jy ! Component: 350 - total flux cleaned = -0.0125559 Jy ! Component: 400 - total flux cleaned = -0.0129623 Jy ! Component: 450 - total flux cleaned = -0.0133535 Jy ! Component: 500 - total flux cleaned = -0.013637 Jy ! Component: 550 - total flux cleaned = -0.0140033 Jy ! Component: 600 - total flux cleaned = -0.0142709 Jy ! Component: 650 - total flux cleaned = -0.0147035 Jy ! Component: 700 - total flux cleaned = -0.0150398 Jy ! Component: 750 - total flux cleaned = -0.0152856 Jy ! Component: 800 - total flux cleaned = -0.0154455 Jy ! Component: 850 - total flux cleaned = -0.0155235 Jy ! Component: 900 - total flux cleaned = -0.015523 Jy ! Component: 950 - total flux cleaned = -0.015523 Jy ! Component: 1000 - total flux cleaned = -0.01545 Jy ! Component: 1050 - total flux cleaned = -0.0154505 Jy ! Component: 1100 - total flux cleaned = -0.0154508 Jy ! Component: 1150 - total flux cleaned = -0.0153804 Jy ! Component: 1200 - total flux cleaned = -0.0153798 Jy ! Component: 1250 - total flux cleaned = -0.0155823 Jy ! Component: 1300 - total flux cleaned = -0.0156475 Jy ! Component: 1350 - total flux cleaned = -0.0157785 Jy ! Component: 1400 - total flux cleaned = -0.0159083 Jy ! Component: 1450 - total flux cleaned = -0.0160998 Jy ! Component: 1500 - total flux cleaned = -0.0163514 Jy ! Component: 1550 - total flux cleaned = -0.0163506 Jy ! Component: 1600 - total flux cleaned = -0.0164733 Jy ! Component: 1650 - total flux cleaned = -0.016412 Jy ! Component: 1700 - total flux cleaned = -0.0163519 Jy ! Component: 1750 - total flux cleaned = -0.0164124 Jy ! Component: 1800 - total flux cleaned = -0.0165304 Jy ! Component: 1850 - total flux cleaned = -0.0165302 Jy ! Component: 1900 - total flux cleaned = -0.0164139 Jy ! Component: 1950 - total flux cleaned = -0.0164715 Jy ! Component: 2000 - total flux cleaned = -0.0164144 Jy ! Component: 2050 - total flux cleaned = -0.0163581 Jy ! Component: 2100 - total flux cleaned = -0.0164704 Jy ! Component: 2150 - total flux cleaned = -0.0165263 Jy ! Component: 2200 - total flux cleaned = -0.0164707 Jy ! Component: 2250 - total flux cleaned = -0.0165808 Jy ! Component: 2300 - total flux cleaned = -0.0165257 Jy ! Component: 2350 - total flux cleaned = -0.0165257 Jy ! Component: 2400 - total flux cleaned = -0.016526 Jy ! Component: 2450 - total flux cleaned = -0.0164726 Jy ! Component: 2500 - total flux cleaned = -0.0165262 Jy ! Component: 2550 - total flux cleaned = -0.016473 Jy ! Component: 2600 - total flux cleaned = -0.0164729 Jy ! Component: 2650 - total flux cleaned = -0.0164727 Jy ! Component: 2700 - total flux cleaned = -0.0164203 Jy ! Component: 2750 - total flux cleaned = -0.0164199 Jy ! Component: 2800 - total flux cleaned = -0.016368 Jy ! Component: 2850 - total flux cleaned = -0.0163678 Jy ! Component: 2900 - total flux cleaned = -0.0163165 Jy ! Component: 2950 - total flux cleaned = -0.0163674 Jy ! Component: 3000 - total flux cleaned = -0.0163166 Jy ! Component: 3050 - total flux cleaned = -0.0163166 Jy ! Component: 3100 - total flux cleaned = -0.0163165 Jy ! Component: 3150 - total flux cleaned = -0.0162664 Jy ! Component: 3200 - total flux cleaned = -0.0162167 Jy ! Component: 3250 - total flux cleaned = -0.016316 Jy ! Component: 3300 - total flux cleaned = -0.0161676 Jy ! Component: 3350 - total flux cleaned = -0.0161675 Jy ! Component: 3400 - total flux cleaned = -0.0162169 Jy ! Component: 3450 - total flux cleaned = -0.0161679 Jy ! Component: 3500 - total flux cleaned = -0.0160215 Jy ! Component: 3550 - total flux cleaned = -0.0160705 Jy ! Component: 3600 - total flux cleaned = -0.0160705 Jy ! Component: 3650 - total flux cleaned = -0.0159736 Jy ! Component: 3700 - total flux cleaned = -0.0159737 Jy ! Component: 3750 - total flux cleaned = -0.0159254 Jy ! Component: 3800 - total flux cleaned = -0.0159736 Jy ! Component: 3850 - total flux cleaned = -0.015781 Jy ! Component: 3900 - total flux cleaned = -0.015925 Jy ! Component: 3950 - total flux cleaned = -0.0158292 Jy ! Component: 4000 - total flux cleaned = -0.0158772 Jy ! Component: 4050 - total flux cleaned = -0.0157814 Jy ! Total flux subtracted in 4096 components = -0.0156858 Jy ! Clean residual min=-0.003184 max=0.003556 Jy/beam ! Clean residual mean=-0.000002 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.160378 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 311 components and 0.160378 Jy ![Exited script file: muppet] wmap "J1653-1551_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.857 x 6.495 at 3.101 degrees (North through East) ! Clean map min=-0.0066248 max=0.13712 Jy/beam ! Writing clean map to FITS file: J1653-1551_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.137124 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000846747 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.85251 1.85251 3.70502 7.41005 14.8201 29.6402 59.2804 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.137 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.857 x 6.495 at 3.101 degrees (North through East) ! Clean map min=-0.0066248 max=0.13712 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1653-1551_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:32:22 2017